mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-28 15:13:55 +08:00
500b55b05d
Per PCIe r5, sec 7.5.1.2.4, a device must not claim accesses to its Expansion ROM unless both the Memory Space Enable and the Expansion ROM Enable bit are set. But apparently some Intel I210 NICs don't work correctly if the ROM BAR overlaps another BAR, even if the Expansion ROM is disabled. Michael reported that on a Kontron SMARC-sAL28 ARM64 system with U-Boot v2021.01-rc3, the ROM BAR overlaps BAR 3, and networking doesn't work at all: BAR 0: 0x40000000 (32-bit, non-prefetchable) [size=1M] BAR 3: 0x40200000 (32-bit, non-prefetchable) [size=16K] ROM: 0x40200000 (disabled) [size=1M] NETDEV WATCHDOG: enP2p1s0 (igb): transmit queue 0 timed out Hardware name: Kontron SMARC-sAL28 (Single PHY) on SMARC Eval 2.0 carrier (DT) igb 0002:01:00.0 enP2p1s0: Reset adapter Previously, pci_std_update_resource() wrote the assigned ROM address to the BAR only when the ROM was enabled. This meant that the I210 ROM BAR could be left with an address assigned by firmware, which might overlap with other BARs. Quirk these I210 devices so pci_std_update_resource() always writes the assigned address to the ROM BAR, whether or not the ROM is enabled. Link: https://lore.kernel.org/r/20211223163754.GA1267351@bhelgaas Link: https://lore.kernel.org/r/20201230185317.30915-1-michael@walle.cc Link: https://bugzilla.kernel.org/show_bug.cgi?id=211105 Reported-by: Michael Walle <michael@walle.cc> Tested-by: Michael Walle <michael@walle.cc> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
512 lines
13 KiB
C
512 lines
13 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Support routines for initializing a PCI subsystem
|
|
*
|
|
* Extruded from code written by
|
|
* Dave Rusling (david.rusling@reo.mts.dec.com)
|
|
* David Mosberger (davidm@cs.arizona.edu)
|
|
* David Miller (davem@redhat.com)
|
|
*
|
|
* Fixed for multiple PCI buses, 1999 Andrea Arcangeli <andrea@suse.de>
|
|
*
|
|
* Nov 2000, Ivan Kokshaysky <ink@jurassic.park.msu.ru>
|
|
* Resource sorting
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/export.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/cache.h>
|
|
#include <linux/slab.h>
|
|
#include "pci.h"
|
|
|
|
static void pci_std_update_resource(struct pci_dev *dev, int resno)
|
|
{
|
|
struct pci_bus_region region;
|
|
bool disable;
|
|
u16 cmd;
|
|
u32 new, check, mask;
|
|
int reg;
|
|
struct resource *res = dev->resource + resno;
|
|
|
|
/* Per SR-IOV spec 3.4.1.11, VF BARs are RO zero */
|
|
if (dev->is_virtfn)
|
|
return;
|
|
|
|
/*
|
|
* Ignore resources for unimplemented BARs and unused resource slots
|
|
* for 64 bit BARs.
|
|
*/
|
|
if (!res->flags)
|
|
return;
|
|
|
|
if (res->flags & IORESOURCE_UNSET)
|
|
return;
|
|
|
|
/*
|
|
* Ignore non-moveable resources. This might be legacy resources for
|
|
* which no functional BAR register exists or another important
|
|
* system resource we shouldn't move around.
|
|
*/
|
|
if (res->flags & IORESOURCE_PCI_FIXED)
|
|
return;
|
|
|
|
pcibios_resource_to_bus(dev->bus, ®ion, res);
|
|
new = region.start;
|
|
|
|
if (res->flags & IORESOURCE_IO) {
|
|
mask = (u32)PCI_BASE_ADDRESS_IO_MASK;
|
|
new |= res->flags & ~PCI_BASE_ADDRESS_IO_MASK;
|
|
} else if (resno == PCI_ROM_RESOURCE) {
|
|
mask = PCI_ROM_ADDRESS_MASK;
|
|
} else {
|
|
mask = (u32)PCI_BASE_ADDRESS_MEM_MASK;
|
|
new |= res->flags & ~PCI_BASE_ADDRESS_MEM_MASK;
|
|
}
|
|
|
|
if (resno < PCI_ROM_RESOURCE) {
|
|
reg = PCI_BASE_ADDRESS_0 + 4 * resno;
|
|
} else if (resno == PCI_ROM_RESOURCE) {
|
|
|
|
/*
|
|
* Apparently some Matrox devices have ROM BARs that read
|
|
* as zero when disabled, so don't update ROM BARs unless
|
|
* they're enabled. See
|
|
* https://lore.kernel.org/r/43147B3D.1030309@vc.cvut.cz/
|
|
* But we must update ROM BAR for buggy devices where even a
|
|
* disabled ROM can conflict with other BARs.
|
|
*/
|
|
if (!(res->flags & IORESOURCE_ROM_ENABLE) &&
|
|
!dev->rom_bar_overlap)
|
|
return;
|
|
|
|
reg = dev->rom_base_reg;
|
|
if (res->flags & IORESOURCE_ROM_ENABLE)
|
|
new |= PCI_ROM_ADDRESS_ENABLE;
|
|
} else
|
|
return;
|
|
|
|
/*
|
|
* We can't update a 64-bit BAR atomically, so when possible,
|
|
* disable decoding so that a half-updated BAR won't conflict
|
|
* with another device.
|
|
*/
|
|
disable = (res->flags & IORESOURCE_MEM_64) && !dev->mmio_always_on;
|
|
if (disable) {
|
|
pci_read_config_word(dev, PCI_COMMAND, &cmd);
|
|
pci_write_config_word(dev, PCI_COMMAND,
|
|
cmd & ~PCI_COMMAND_MEMORY);
|
|
}
|
|
|
|
pci_write_config_dword(dev, reg, new);
|
|
pci_read_config_dword(dev, reg, &check);
|
|
|
|
if ((new ^ check) & mask) {
|
|
pci_err(dev, "BAR %d: error updating (%#08x != %#08x)\n",
|
|
resno, new, check);
|
|
}
|
|
|
|
if (res->flags & IORESOURCE_MEM_64) {
|
|
new = region.start >> 16 >> 16;
|
|
pci_write_config_dword(dev, reg + 4, new);
|
|
pci_read_config_dword(dev, reg + 4, &check);
|
|
if (check != new) {
|
|
pci_err(dev, "BAR %d: error updating (high %#08x != %#08x)\n",
|
|
resno, new, check);
|
|
}
|
|
}
|
|
|
|
if (disable)
|
|
pci_write_config_word(dev, PCI_COMMAND, cmd);
|
|
}
|
|
|
|
void pci_update_resource(struct pci_dev *dev, int resno)
|
|
{
|
|
if (resno <= PCI_ROM_RESOURCE)
|
|
pci_std_update_resource(dev, resno);
|
|
#ifdef CONFIG_PCI_IOV
|
|
else if (resno >= PCI_IOV_RESOURCES && resno <= PCI_IOV_RESOURCE_END)
|
|
pci_iov_update_resource(dev, resno);
|
|
#endif
|
|
}
|
|
|
|
int pci_claim_resource(struct pci_dev *dev, int resource)
|
|
{
|
|
struct resource *res = &dev->resource[resource];
|
|
struct resource *root, *conflict;
|
|
|
|
if (res->flags & IORESOURCE_UNSET) {
|
|
pci_info(dev, "can't claim BAR %d %pR: no address assigned\n",
|
|
resource, res);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* If we have a shadow copy in RAM, the PCI device doesn't respond
|
|
* to the shadow range, so we don't need to claim it, and upstream
|
|
* bridges don't need to route the range to the device.
|
|
*/
|
|
if (res->flags & IORESOURCE_ROM_SHADOW)
|
|
return 0;
|
|
|
|
root = pci_find_parent_resource(dev, res);
|
|
if (!root) {
|
|
pci_info(dev, "can't claim BAR %d %pR: no compatible bridge window\n",
|
|
resource, res);
|
|
res->flags |= IORESOURCE_UNSET;
|
|
return -EINVAL;
|
|
}
|
|
|
|
conflict = request_resource_conflict(root, res);
|
|
if (conflict) {
|
|
pci_info(dev, "can't claim BAR %d %pR: address conflict with %s %pR\n",
|
|
resource, res, conflict->name, conflict);
|
|
res->flags |= IORESOURCE_UNSET;
|
|
return -EBUSY;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(pci_claim_resource);
|
|
|
|
void pci_disable_bridge_window(struct pci_dev *dev)
|
|
{
|
|
/* MMIO Base/Limit */
|
|
pci_write_config_dword(dev, PCI_MEMORY_BASE, 0x0000fff0);
|
|
|
|
/* Prefetchable MMIO Base/Limit */
|
|
pci_write_config_dword(dev, PCI_PREF_LIMIT_UPPER32, 0);
|
|
pci_write_config_dword(dev, PCI_PREF_MEMORY_BASE, 0x0000fff0);
|
|
pci_write_config_dword(dev, PCI_PREF_BASE_UPPER32, 0xffffffff);
|
|
}
|
|
|
|
/*
|
|
* Generic function that returns a value indicating that the device's
|
|
* original BIOS BAR address was not saved and so is not available for
|
|
* reinstatement.
|
|
*
|
|
* Can be over-ridden by architecture specific code that implements
|
|
* reinstatement functionality rather than leaving it disabled when
|
|
* normal allocation attempts fail.
|
|
*/
|
|
resource_size_t __weak pcibios_retrieve_fw_addr(struct pci_dev *dev, int idx)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int pci_revert_fw_address(struct resource *res, struct pci_dev *dev,
|
|
int resno, resource_size_t size)
|
|
{
|
|
struct resource *root, *conflict;
|
|
resource_size_t fw_addr, start, end;
|
|
|
|
fw_addr = pcibios_retrieve_fw_addr(dev, resno);
|
|
if (!fw_addr)
|
|
return -ENOMEM;
|
|
|
|
start = res->start;
|
|
end = res->end;
|
|
res->start = fw_addr;
|
|
res->end = res->start + size - 1;
|
|
res->flags &= ~IORESOURCE_UNSET;
|
|
|
|
root = pci_find_parent_resource(dev, res);
|
|
if (!root) {
|
|
if (res->flags & IORESOURCE_IO)
|
|
root = &ioport_resource;
|
|
else
|
|
root = &iomem_resource;
|
|
}
|
|
|
|
pci_info(dev, "BAR %d: trying firmware assignment %pR\n",
|
|
resno, res);
|
|
conflict = request_resource_conflict(root, res);
|
|
if (conflict) {
|
|
pci_info(dev, "BAR %d: %pR conflicts with %s %pR\n",
|
|
resno, res, conflict->name, conflict);
|
|
res->start = start;
|
|
res->end = end;
|
|
res->flags |= IORESOURCE_UNSET;
|
|
return -EBUSY;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* We don't have to worry about legacy ISA devices, so nothing to do here.
|
|
* This is marked as __weak because multiple architectures define it; it should
|
|
* eventually go away.
|
|
*/
|
|
resource_size_t __weak pcibios_align_resource(void *data,
|
|
const struct resource *res,
|
|
resource_size_t size,
|
|
resource_size_t align)
|
|
{
|
|
return res->start;
|
|
}
|
|
|
|
static int __pci_assign_resource(struct pci_bus *bus, struct pci_dev *dev,
|
|
int resno, resource_size_t size, resource_size_t align)
|
|
{
|
|
struct resource *res = dev->resource + resno;
|
|
resource_size_t min;
|
|
int ret;
|
|
|
|
min = (res->flags & IORESOURCE_IO) ? PCIBIOS_MIN_IO : PCIBIOS_MIN_MEM;
|
|
|
|
/*
|
|
* First, try exact prefetching match. Even if a 64-bit
|
|
* prefetchable bridge window is below 4GB, we can't put a 32-bit
|
|
* prefetchable resource in it because pbus_size_mem() assumes a
|
|
* 64-bit window will contain no 32-bit resources. If we assign
|
|
* things differently than they were sized, not everything will fit.
|
|
*/
|
|
ret = pci_bus_alloc_resource(bus, res, size, align, min,
|
|
IORESOURCE_PREFETCH | IORESOURCE_MEM_64,
|
|
pcibios_align_resource, dev);
|
|
if (ret == 0)
|
|
return 0;
|
|
|
|
/*
|
|
* If the prefetchable window is only 32 bits wide, we can put
|
|
* 64-bit prefetchable resources in it.
|
|
*/
|
|
if ((res->flags & (IORESOURCE_PREFETCH | IORESOURCE_MEM_64)) ==
|
|
(IORESOURCE_PREFETCH | IORESOURCE_MEM_64)) {
|
|
ret = pci_bus_alloc_resource(bus, res, size, align, min,
|
|
IORESOURCE_PREFETCH,
|
|
pcibios_align_resource, dev);
|
|
if (ret == 0)
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* If we didn't find a better match, we can put any memory resource
|
|
* in a non-prefetchable window. If this resource is 32 bits and
|
|
* non-prefetchable, the first call already tried the only possibility
|
|
* so we don't need to try again.
|
|
*/
|
|
if (res->flags & (IORESOURCE_PREFETCH | IORESOURCE_MEM_64))
|
|
ret = pci_bus_alloc_resource(bus, res, size, align, min, 0,
|
|
pcibios_align_resource, dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int _pci_assign_resource(struct pci_dev *dev, int resno,
|
|
resource_size_t size, resource_size_t min_align)
|
|
{
|
|
struct pci_bus *bus;
|
|
int ret;
|
|
|
|
bus = dev->bus;
|
|
while ((ret = __pci_assign_resource(bus, dev, resno, size, min_align))) {
|
|
if (!bus->parent || !bus->self->transparent)
|
|
break;
|
|
bus = bus->parent;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
int pci_assign_resource(struct pci_dev *dev, int resno)
|
|
{
|
|
struct resource *res = dev->resource + resno;
|
|
resource_size_t align, size;
|
|
int ret;
|
|
|
|
if (res->flags & IORESOURCE_PCI_FIXED)
|
|
return 0;
|
|
|
|
res->flags |= IORESOURCE_UNSET;
|
|
align = pci_resource_alignment(dev, res);
|
|
if (!align) {
|
|
pci_info(dev, "BAR %d: can't assign %pR (bogus alignment)\n",
|
|
resno, res);
|
|
return -EINVAL;
|
|
}
|
|
|
|
size = resource_size(res);
|
|
ret = _pci_assign_resource(dev, resno, size, align);
|
|
|
|
/*
|
|
* If we failed to assign anything, let's try the address
|
|
* where firmware left it. That at least has a chance of
|
|
* working, which is better than just leaving it disabled.
|
|
*/
|
|
if (ret < 0) {
|
|
pci_info(dev, "BAR %d: no space for %pR\n", resno, res);
|
|
ret = pci_revert_fw_address(res, dev, resno, size);
|
|
}
|
|
|
|
if (ret < 0) {
|
|
pci_info(dev, "BAR %d: failed to assign %pR\n", resno, res);
|
|
return ret;
|
|
}
|
|
|
|
res->flags &= ~IORESOURCE_UNSET;
|
|
res->flags &= ~IORESOURCE_STARTALIGN;
|
|
pci_info(dev, "BAR %d: assigned %pR\n", resno, res);
|
|
if (resno < PCI_BRIDGE_RESOURCES)
|
|
pci_update_resource(dev, resno);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(pci_assign_resource);
|
|
|
|
int pci_reassign_resource(struct pci_dev *dev, int resno, resource_size_t addsize,
|
|
resource_size_t min_align)
|
|
{
|
|
struct resource *res = dev->resource + resno;
|
|
unsigned long flags;
|
|
resource_size_t new_size;
|
|
int ret;
|
|
|
|
if (res->flags & IORESOURCE_PCI_FIXED)
|
|
return 0;
|
|
|
|
flags = res->flags;
|
|
res->flags |= IORESOURCE_UNSET;
|
|
if (!res->parent) {
|
|
pci_info(dev, "BAR %d: can't reassign an unassigned resource %pR\n",
|
|
resno, res);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* already aligned with min_align */
|
|
new_size = resource_size(res) + addsize;
|
|
ret = _pci_assign_resource(dev, resno, new_size, min_align);
|
|
if (ret) {
|
|
res->flags = flags;
|
|
pci_info(dev, "BAR %d: %pR (failed to expand by %#llx)\n",
|
|
resno, res, (unsigned long long) addsize);
|
|
return ret;
|
|
}
|
|
|
|
res->flags &= ~IORESOURCE_UNSET;
|
|
res->flags &= ~IORESOURCE_STARTALIGN;
|
|
pci_info(dev, "BAR %d: reassigned %pR (expanded by %#llx)\n",
|
|
resno, res, (unsigned long long) addsize);
|
|
if (resno < PCI_BRIDGE_RESOURCES)
|
|
pci_update_resource(dev, resno);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void pci_release_resource(struct pci_dev *dev, int resno)
|
|
{
|
|
struct resource *res = dev->resource + resno;
|
|
|
|
pci_info(dev, "BAR %d: releasing %pR\n", resno, res);
|
|
|
|
if (!res->parent)
|
|
return;
|
|
|
|
release_resource(res);
|
|
res->end = resource_size(res) - 1;
|
|
res->start = 0;
|
|
res->flags |= IORESOURCE_UNSET;
|
|
}
|
|
EXPORT_SYMBOL(pci_release_resource);
|
|
|
|
int pci_resize_resource(struct pci_dev *dev, int resno, int size)
|
|
{
|
|
struct resource *res = dev->resource + resno;
|
|
struct pci_host_bridge *host;
|
|
int old, ret;
|
|
u32 sizes;
|
|
u16 cmd;
|
|
|
|
/* Check if we must preserve the firmware's resource assignment */
|
|
host = pci_find_host_bridge(dev->bus);
|
|
if (host->preserve_config)
|
|
return -ENOTSUPP;
|
|
|
|
/* Make sure the resource isn't assigned before resizing it. */
|
|
if (!(res->flags & IORESOURCE_UNSET))
|
|
return -EBUSY;
|
|
|
|
pci_read_config_word(dev, PCI_COMMAND, &cmd);
|
|
if (cmd & PCI_COMMAND_MEMORY)
|
|
return -EBUSY;
|
|
|
|
sizes = pci_rebar_get_possible_sizes(dev, resno);
|
|
if (!sizes)
|
|
return -ENOTSUPP;
|
|
|
|
if (!(sizes & BIT(size)))
|
|
return -EINVAL;
|
|
|
|
old = pci_rebar_get_current_size(dev, resno);
|
|
if (old < 0)
|
|
return old;
|
|
|
|
ret = pci_rebar_set_size(dev, resno, size);
|
|
if (ret)
|
|
return ret;
|
|
|
|
res->end = res->start + pci_rebar_size_to_bytes(size) - 1;
|
|
|
|
/* Check if the new config works by trying to assign everything. */
|
|
if (dev->bus->self) {
|
|
ret = pci_reassign_bridge_resources(dev->bus->self, res->flags);
|
|
if (ret)
|
|
goto error_resize;
|
|
}
|
|
return 0;
|
|
|
|
error_resize:
|
|
pci_rebar_set_size(dev, resno, old);
|
|
res->end = res->start + pci_rebar_size_to_bytes(old) - 1;
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(pci_resize_resource);
|
|
|
|
int pci_enable_resources(struct pci_dev *dev, int mask)
|
|
{
|
|
u16 cmd, old_cmd;
|
|
int i;
|
|
struct resource *r;
|
|
|
|
pci_read_config_word(dev, PCI_COMMAND, &cmd);
|
|
old_cmd = cmd;
|
|
|
|
for (i = 0; i < PCI_NUM_RESOURCES; i++) {
|
|
if (!(mask & (1 << i)))
|
|
continue;
|
|
|
|
r = &dev->resource[i];
|
|
|
|
if (!(r->flags & (IORESOURCE_IO | IORESOURCE_MEM)))
|
|
continue;
|
|
if ((i == PCI_ROM_RESOURCE) &&
|
|
(!(r->flags & IORESOURCE_ROM_ENABLE)))
|
|
continue;
|
|
|
|
if (r->flags & IORESOURCE_UNSET) {
|
|
pci_err(dev, "can't enable device: BAR %d %pR not assigned\n",
|
|
i, r);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!r->parent) {
|
|
pci_err(dev, "can't enable device: BAR %d %pR not claimed\n",
|
|
i, r);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (r->flags & IORESOURCE_IO)
|
|
cmd |= PCI_COMMAND_IO;
|
|
if (r->flags & IORESOURCE_MEM)
|
|
cmd |= PCI_COMMAND_MEMORY;
|
|
}
|
|
|
|
if (cmd != old_cmd) {
|
|
pci_info(dev, "enabling device (%04x -> %04x)\n", old_cmd, cmd);
|
|
pci_write_config_word(dev, PCI_COMMAND, cmd);
|
|
}
|
|
return 0;
|
|
}
|