mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-29 07:34:06 +08:00
4a22969be9
There is a spelling mistake in a dev_dbg message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
290 lines
7.8 KiB
C
290 lines
7.8 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
//
|
|
// max8997_charger.c - Power supply consumer driver for the Maxim 8997/8966
|
|
//
|
|
// Copyright (C) 2011 Samsung Electronics
|
|
// MyungJoo Ham <myungjoo.ham@samsung.com>
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/extcon.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/power_supply.h>
|
|
#include <linux/mfd/max8997.h>
|
|
#include <linux/mfd/max8997-private.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
/* MAX8997_REG_STATUS4 */
|
|
#define DCINOK_SHIFT 1
|
|
#define DCINOK_MASK (1 << DCINOK_SHIFT)
|
|
#define DETBAT_SHIFT 2
|
|
#define DETBAT_MASK (1 << DETBAT_SHIFT)
|
|
|
|
/* MAX8997_REG_MBCCTRL1 */
|
|
#define TFCH_SHIFT 4
|
|
#define TFCH_MASK (7 << TFCH_SHIFT)
|
|
|
|
/* MAX8997_REG_MBCCTRL5 */
|
|
#define ITOPOFF_SHIFT 0
|
|
#define ITOPOFF_MASK (0xF << ITOPOFF_SHIFT)
|
|
|
|
struct charger_data {
|
|
struct device *dev;
|
|
struct max8997_dev *iodev;
|
|
struct power_supply *battery;
|
|
struct regulator *reg;
|
|
struct extcon_dev *edev;
|
|
struct notifier_block extcon_nb;
|
|
struct work_struct extcon_work;
|
|
};
|
|
|
|
static enum power_supply_property max8997_battery_props[] = {
|
|
POWER_SUPPLY_PROP_STATUS, /* "FULL", "CHARGING" or "DISCHARGING". */
|
|
POWER_SUPPLY_PROP_PRESENT, /* the presence of battery */
|
|
POWER_SUPPLY_PROP_ONLINE, /* charger is active or not */
|
|
};
|
|
|
|
/* Note that the charger control is done by a current regulator "CHARGER" */
|
|
static int max8997_battery_get_property(struct power_supply *psy,
|
|
enum power_supply_property psp,
|
|
union power_supply_propval *val)
|
|
{
|
|
struct charger_data *charger = power_supply_get_drvdata(psy);
|
|
struct i2c_client *i2c = charger->iodev->i2c;
|
|
int ret;
|
|
u8 reg;
|
|
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_STATUS:
|
|
val->intval = 0;
|
|
ret = max8997_read_reg(i2c, MAX8997_REG_STATUS4, ®);
|
|
if (ret)
|
|
return ret;
|
|
if ((reg & (1 << 0)) == 0x1)
|
|
val->intval = POWER_SUPPLY_STATUS_FULL;
|
|
else if ((reg & DCINOK_MASK))
|
|
val->intval = POWER_SUPPLY_STATUS_CHARGING;
|
|
else
|
|
val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
|
|
|
|
break;
|
|
case POWER_SUPPLY_PROP_PRESENT:
|
|
val->intval = 0;
|
|
ret = max8997_read_reg(i2c, MAX8997_REG_STATUS4, ®);
|
|
if (ret)
|
|
return ret;
|
|
if ((reg & DETBAT_MASK) == 0x0)
|
|
val->intval = 1;
|
|
|
|
break;
|
|
case POWER_SUPPLY_PROP_ONLINE:
|
|
val->intval = 0;
|
|
ret = max8997_read_reg(i2c, MAX8997_REG_STATUS4, ®);
|
|
if (ret)
|
|
return ret;
|
|
if (reg & DCINOK_MASK)
|
|
val->intval = 1;
|
|
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void max8997_battery_extcon_evt_stop_work(void *data)
|
|
{
|
|
struct charger_data *charger = data;
|
|
|
|
cancel_work_sync(&charger->extcon_work);
|
|
}
|
|
|
|
static void max8997_battery_extcon_evt_worker(struct work_struct *work)
|
|
{
|
|
struct charger_data *charger =
|
|
container_of(work, struct charger_data, extcon_work);
|
|
struct extcon_dev *edev = charger->edev;
|
|
int current_limit;
|
|
|
|
if (extcon_get_state(edev, EXTCON_CHG_USB_SDP) > 0) {
|
|
dev_dbg(charger->dev, "USB SDP charger is connected\n");
|
|
current_limit = 450000;
|
|
} else if (extcon_get_state(edev, EXTCON_CHG_USB_DCP) > 0) {
|
|
dev_dbg(charger->dev, "USB DCP charger is connected\n");
|
|
current_limit = 650000;
|
|
} else if (extcon_get_state(edev, EXTCON_CHG_USB_FAST) > 0) {
|
|
dev_dbg(charger->dev, "USB FAST charger is connected\n");
|
|
current_limit = 650000;
|
|
} else if (extcon_get_state(edev, EXTCON_CHG_USB_SLOW) > 0) {
|
|
dev_dbg(charger->dev, "USB SLOW charger is connected\n");
|
|
current_limit = 650000;
|
|
} else if (extcon_get_state(edev, EXTCON_CHG_USB_CDP) > 0) {
|
|
dev_dbg(charger->dev, "USB CDP charger is connected\n");
|
|
current_limit = 650000;
|
|
} else {
|
|
dev_dbg(charger->dev, "USB charger is disconnected\n");
|
|
current_limit = -1;
|
|
}
|
|
|
|
if (current_limit > 0) {
|
|
int ret = regulator_set_current_limit(charger->reg, current_limit, current_limit);
|
|
|
|
if (ret) {
|
|
dev_err(charger->dev, "failed to set current limit: %d\n", ret);
|
|
return;
|
|
}
|
|
ret = regulator_enable(charger->reg);
|
|
if (ret)
|
|
dev_err(charger->dev, "failed to enable regulator: %d\n", ret);
|
|
} else {
|
|
int ret = regulator_disable(charger->reg);
|
|
|
|
if (ret)
|
|
dev_err(charger->dev, "failed to disable regulator: %d\n", ret);
|
|
}
|
|
}
|
|
|
|
static int max8997_battery_extcon_evt(struct notifier_block *nb,
|
|
unsigned long event, void *param)
|
|
{
|
|
struct charger_data *charger =
|
|
container_of(nb, struct charger_data, extcon_nb);
|
|
schedule_work(&charger->extcon_work);
|
|
return NOTIFY_OK;
|
|
}
|
|
|
|
static const struct power_supply_desc max8997_battery_desc = {
|
|
.name = "max8997_pmic",
|
|
.type = POWER_SUPPLY_TYPE_BATTERY,
|
|
.get_property = max8997_battery_get_property,
|
|
.properties = max8997_battery_props,
|
|
.num_properties = ARRAY_SIZE(max8997_battery_props),
|
|
};
|
|
|
|
static int max8997_battery_probe(struct platform_device *pdev)
|
|
{
|
|
int ret = 0;
|
|
struct charger_data *charger;
|
|
struct max8997_dev *iodev = dev_get_drvdata(pdev->dev.parent);
|
|
struct i2c_client *i2c = iodev->i2c;
|
|
struct max8997_platform_data *pdata = iodev->pdata;
|
|
struct power_supply_config psy_cfg = {};
|
|
|
|
if (!pdata) {
|
|
dev_err(&pdev->dev, "No platform data supplied.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (pdata->eoc_mA) {
|
|
int val = (pdata->eoc_mA - 50) / 10;
|
|
if (val < 0)
|
|
val = 0;
|
|
if (val > 0xf)
|
|
val = 0xf;
|
|
|
|
ret = max8997_update_reg(i2c, MAX8997_REG_MBCCTRL5,
|
|
val << ITOPOFF_SHIFT, ITOPOFF_MASK);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Cannot use i2c bus.\n");
|
|
return ret;
|
|
}
|
|
}
|
|
switch (pdata->timeout) {
|
|
case 5:
|
|
ret = max8997_update_reg(i2c, MAX8997_REG_MBCCTRL1,
|
|
0x2 << TFCH_SHIFT, TFCH_MASK);
|
|
break;
|
|
case 6:
|
|
ret = max8997_update_reg(i2c, MAX8997_REG_MBCCTRL1,
|
|
0x3 << TFCH_SHIFT, TFCH_MASK);
|
|
break;
|
|
case 7:
|
|
ret = max8997_update_reg(i2c, MAX8997_REG_MBCCTRL1,
|
|
0x4 << TFCH_SHIFT, TFCH_MASK);
|
|
break;
|
|
case 0:
|
|
ret = max8997_update_reg(i2c, MAX8997_REG_MBCCTRL1,
|
|
0x7 << TFCH_SHIFT, TFCH_MASK);
|
|
break;
|
|
default:
|
|
dev_err(&pdev->dev, "incorrect timeout value (%d)\n",
|
|
pdata->timeout);
|
|
return -EINVAL;
|
|
}
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Cannot use i2c bus.\n");
|
|
return ret;
|
|
}
|
|
|
|
charger = devm_kzalloc(&pdev->dev, sizeof(*charger), GFP_KERNEL);
|
|
if (!charger)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, charger);
|
|
|
|
charger->dev = &pdev->dev;
|
|
charger->iodev = iodev;
|
|
|
|
psy_cfg.drv_data = charger;
|
|
|
|
charger->battery = devm_power_supply_register(&pdev->dev,
|
|
&max8997_battery_desc,
|
|
&psy_cfg);
|
|
if (IS_ERR(charger->battery)) {
|
|
dev_err(&pdev->dev, "failed: power supply register\n");
|
|
return PTR_ERR(charger->battery);
|
|
}
|
|
|
|
charger->reg = devm_regulator_get_optional(&pdev->dev, "charger");
|
|
if (IS_ERR(charger->reg)) {
|
|
if (PTR_ERR(charger->reg) == -EPROBE_DEFER)
|
|
return -EPROBE_DEFER;
|
|
dev_info(&pdev->dev, "couldn't get charger regulator\n");
|
|
}
|
|
charger->edev = extcon_get_edev_by_phandle(&pdev->dev, 0);
|
|
if (IS_ERR(charger->edev)) {
|
|
if (PTR_ERR(charger->edev) == -EPROBE_DEFER)
|
|
return -EPROBE_DEFER;
|
|
dev_info(charger->dev, "couldn't get extcon device\n");
|
|
}
|
|
|
|
if (!IS_ERR(charger->reg) && !IS_ERR(charger->edev)) {
|
|
INIT_WORK(&charger->extcon_work, max8997_battery_extcon_evt_worker);
|
|
ret = devm_add_action(&pdev->dev, max8997_battery_extcon_evt_stop_work, charger);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to add extcon evt stop action: %d\n", ret);
|
|
return ret;
|
|
}
|
|
charger->extcon_nb.notifier_call = max8997_battery_extcon_evt;
|
|
ret = devm_extcon_register_notifier_all(&pdev->dev, charger->edev,
|
|
&charger->extcon_nb);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to register extcon notifier\n");
|
|
return ret;
|
|
};
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct platform_device_id max8997_battery_id[] = {
|
|
{ "max8997-battery", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, max8997_battery_id);
|
|
|
|
static struct platform_driver max8997_battery_driver = {
|
|
.driver = {
|
|
.name = "max8997-battery",
|
|
},
|
|
.probe = max8997_battery_probe,
|
|
.id_table = max8997_battery_id,
|
|
};
|
|
module_platform_driver(max8997_battery_driver);
|
|
|
|
MODULE_DESCRIPTION("MAXIM 8997/8966 battery control driver");
|
|
MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
|
|
MODULE_LICENSE("GPL");
|