2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 19:53:59 +08:00
linux-next/arch/powerpc/kernel/pci_64.c
Benjamin Herrenschmidt 9d5f49283b [POWERPC] Always hookup PHB IO resource even when empty
We must always hookup the pci_bus resource 0 to the PHB io_resource
even if the latter is empty (the bus has no IO support).  Otherwise,
some other code will end up hooking it up to something bogus and the
resource tree will end up being broken.

This fixes boot on QS20 Cell blades where the IDE driver failed to
allocate the IO resources due to breakage of the resource tree.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25 22:52:53 +11:00

662 lines
17 KiB
C

/*
* Port for PPC64 David Engebretsen, IBM Corp.
* Contains common pci routines for ppc64 platform, pSeries and iSeries brands.
*
* Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM
* Rework, based on alpha PCI code.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#undef DEBUG
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/mm.h>
#include <linux/list.h>
#include <linux/syscalls.h>
#include <linux/irq.h>
#include <linux/vmalloc.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/pci-bridge.h>
#include <asm/byteorder.h>
#include <asm/machdep.h>
#include <asm/ppc-pci.h>
#ifdef DEBUG
#include <asm/udbg.h>
#define DBG(fmt...) printk(fmt)
#else
#define DBG(fmt...)
#endif
unsigned long pci_probe_only = 1;
/* pci_io_base -- the base address from which io bars are offsets.
* This is the lowest I/O base address (so bar values are always positive),
* and it *must* be the start of ISA space if an ISA bus exists because
* ISA drivers use hard coded offsets. If no ISA bus exists nothing
* is mapped on the first 64K of IO space
*/
unsigned long pci_io_base = ISA_IO_BASE;
EXPORT_SYMBOL(pci_io_base);
LIST_HEAD(hose_list);
static struct dma_mapping_ops *pci_dma_ops;
void set_pci_dma_ops(struct dma_mapping_ops *dma_ops)
{
pci_dma_ops = dma_ops;
}
struct dma_mapping_ops *get_pci_dma_ops(void)
{
return pci_dma_ops;
}
EXPORT_SYMBOL(get_pci_dma_ops);
int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
{
return dma_set_mask(&dev->dev, mask);
}
int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
{
int rc;
rc = dma_set_mask(&dev->dev, mask);
dev->dev.coherent_dma_mask = dev->dma_mask;
return rc;
}
static void fixup_broken_pcnet32(struct pci_dev* dev)
{
if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) {
dev->vendor = PCI_VENDOR_ID_AMD;
pci_write_config_word(dev, PCI_VENDOR_ID, PCI_VENDOR_ID_AMD);
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TRIDENT, PCI_ANY_ID, fixup_broken_pcnet32);
static u32 get_int_prop(struct device_node *np, const char *name, u32 def)
{
const u32 *prop;
int len;
prop = of_get_property(np, name, &len);
if (prop && len >= 4)
return *prop;
return def;
}
static unsigned int pci_parse_of_flags(u32 addr0)
{
unsigned int flags = 0;
if (addr0 & 0x02000000) {
flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY;
flags |= (addr0 >> 22) & PCI_BASE_ADDRESS_MEM_TYPE_64;
flags |= (addr0 >> 28) & PCI_BASE_ADDRESS_MEM_TYPE_1M;
if (addr0 & 0x40000000)
flags |= IORESOURCE_PREFETCH
| PCI_BASE_ADDRESS_MEM_PREFETCH;
} else if (addr0 & 0x01000000)
flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO;
return flags;
}
static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev)
{
u64 base, size;
unsigned int flags;
struct resource *res;
const u32 *addrs;
u32 i;
int proplen;
addrs = of_get_property(node, "assigned-addresses", &proplen);
if (!addrs)
return;
DBG(" parse addresses (%d bytes) @ %p\n", proplen, addrs);
for (; proplen >= 20; proplen -= 20, addrs += 5) {
flags = pci_parse_of_flags(addrs[0]);
if (!flags)
continue;
base = of_read_number(&addrs[1], 2);
size = of_read_number(&addrs[3], 2);
if (!size)
continue;
i = addrs[0] & 0xff;
DBG(" base: %llx, size: %llx, i: %x\n",
(unsigned long long)base, (unsigned long long)size, i);
if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) {
res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2];
} else if (i == dev->rom_base_reg) {
res = &dev->resource[PCI_ROM_RESOURCE];
flags |= IORESOURCE_READONLY | IORESOURCE_CACHEABLE;
} else {
printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i);
continue;
}
res->start = base;
res->end = base + size - 1;
res->flags = flags;
res->name = pci_name(dev);
}
}
struct pci_dev *of_create_pci_dev(struct device_node *node,
struct pci_bus *bus, int devfn)
{
struct pci_dev *dev;
const char *type;
dev = alloc_pci_dev();
if (!dev)
return NULL;
type = of_get_property(node, "device_type", NULL);
if (type == NULL)
type = "";
DBG(" create device, devfn: %x, type: %s\n", devfn, type);
dev->bus = bus;
dev->sysdata = node;
dev->dev.parent = bus->bridge;
dev->dev.bus = &pci_bus_type;
dev->devfn = devfn;
dev->multifunction = 0; /* maybe a lie? */
dev->vendor = get_int_prop(node, "vendor-id", 0xffff);
dev->device = get_int_prop(node, "device-id", 0xffff);
dev->subsystem_vendor = get_int_prop(node, "subsystem-vendor-id", 0);
dev->subsystem_device = get_int_prop(node, "subsystem-id", 0);
dev->cfg_size = pci_cfg_space_size(dev);
sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus),
dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
dev->class = get_int_prop(node, "class-code", 0);
dev->revision = get_int_prop(node, "revision-id", 0);
DBG(" class: 0x%x\n", dev->class);
DBG(" revision: 0x%x\n", dev->revision);
dev->current_state = 4; /* unknown power state */
dev->error_state = pci_channel_io_normal;
dev->dma_mask = 0xffffffff;
if (!strcmp(type, "pci") || !strcmp(type, "pciex")) {
/* a PCI-PCI bridge */
dev->hdr_type = PCI_HEADER_TYPE_BRIDGE;
dev->rom_base_reg = PCI_ROM_ADDRESS1;
} else if (!strcmp(type, "cardbus")) {
dev->hdr_type = PCI_HEADER_TYPE_CARDBUS;
} else {
dev->hdr_type = PCI_HEADER_TYPE_NORMAL;
dev->rom_base_reg = PCI_ROM_ADDRESS;
/* Maybe do a default OF mapping here */
dev->irq = NO_IRQ;
}
pci_parse_of_addrs(node, dev);
DBG(" adding to system ...\n");
pci_device_add(dev, bus);
return dev;
}
EXPORT_SYMBOL(of_create_pci_dev);
void __devinit of_scan_bus(struct device_node *node,
struct pci_bus *bus)
{
struct device_node *child;
const u32 *reg;
int reglen, devfn;
struct pci_dev *dev;
DBG("of_scan_bus(%s) bus no %d... \n", node->full_name, bus->number);
/* Scan direct children */
for_each_child_of_node(node, child) {
DBG(" * %s\n", child->full_name);
reg = of_get_property(child, "reg", &reglen);
if (reg == NULL || reglen < 20)
continue;
devfn = (reg[0] >> 8) & 0xff;
/* create a new pci_dev for this device */
dev = of_create_pci_dev(child, bus, devfn);
if (!dev)
continue;
DBG(" dev header type: %x\n", dev->hdr_type);
}
/* Ally all fixups */
pcibios_fixup_of_probed_bus(bus);
/* Now scan child busses */
list_for_each_entry(dev, &bus->devices, bus_list) {
if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) {
struct device_node *child = pci_device_to_OF_node(dev);
if (dev)
of_scan_pci_bridge(child, dev);
}
}
}
EXPORT_SYMBOL(of_scan_bus);
void __devinit of_scan_pci_bridge(struct device_node *node,
struct pci_dev *dev)
{
struct pci_bus *bus;
const u32 *busrange, *ranges;
int len, i, mode;
struct resource *res;
unsigned int flags;
u64 size;
DBG("of_scan_pci_bridge(%s)\n", node->full_name);
/* parse bus-range property */
busrange = of_get_property(node, "bus-range", &len);
if (busrange == NULL || len != 8) {
printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %s\n",
node->full_name);
return;
}
ranges = of_get_property(node, "ranges", &len);
if (ranges == NULL) {
printk(KERN_DEBUG "Can't get ranges for PCI-PCI bridge %s\n",
node->full_name);
return;
}
bus = pci_add_new_bus(dev->bus, dev, busrange[0]);
if (!bus) {
printk(KERN_ERR "Failed to create pci bus for %s\n",
node->full_name);
return;
}
bus->primary = dev->bus->number;
bus->subordinate = busrange[1];
bus->bridge_ctl = 0;
bus->sysdata = node;
/* parse ranges property */
/* PCI #address-cells == 3 and #size-cells == 2 always */
res = &dev->resource[PCI_BRIDGE_RESOURCES];
for (i = 0; i < PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES; ++i) {
res->flags = 0;
bus->resource[i] = res;
++res;
}
i = 1;
for (; len >= 32; len -= 32, ranges += 8) {
flags = pci_parse_of_flags(ranges[0]);
size = of_read_number(&ranges[6], 2);
if (flags == 0 || size == 0)
continue;
if (flags & IORESOURCE_IO) {
res = bus->resource[0];
if (res->flags) {
printk(KERN_ERR "PCI: ignoring extra I/O range"
" for bridge %s\n", node->full_name);
continue;
}
} else {
if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) {
printk(KERN_ERR "PCI: too many memory ranges"
" for bridge %s\n", node->full_name);
continue;
}
res = bus->resource[i];
++i;
}
res->start = of_read_number(&ranges[1], 2);
res->end = res->start + size - 1;
res->flags = flags;
}
sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus),
bus->number);
DBG(" bus name: %s\n", bus->name);
mode = PCI_PROBE_NORMAL;
if (ppc_md.pci_probe_mode)
mode = ppc_md.pci_probe_mode(bus);
DBG(" probe mode: %d\n", mode);
if (mode == PCI_PROBE_DEVTREE)
of_scan_bus(node, bus);
else if (mode == PCI_PROBE_NORMAL)
pci_scan_child_bus(bus);
}
EXPORT_SYMBOL(of_scan_pci_bridge);
void __devinit scan_phb(struct pci_controller *hose)
{
struct pci_bus *bus;
struct device_node *node = hose->dn;
int i, mode;
DBG("PCI: Scanning PHB %s\n", node ? node->full_name : "<NO NAME>");
/* Create an empty bus for the toplevel */
bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, node);
if (bus == NULL) {
printk(KERN_ERR "Failed to create bus for PCI domain %04x\n",
hose->global_number);
return;
}
bus->secondary = hose->first_busno;
hose->bus = bus;
/* Get some IO space for the new PHB */
pcibios_map_io_space(bus);
/* Wire up PHB bus resources */
DBG("PCI: PHB IO resource = %016lx-%016lx [%lx]\n",
hose->io_resource.start, hose->io_resource.end,
hose->io_resource.flags);
bus->resource[0] = &hose->io_resource;
for (i = 0; i < 3; ++i) {
DBG("PCI: PHB MEM resource %d = %016lx-%016lx [%lx]\n", i,
hose->mem_resources[i].start,
hose->mem_resources[i].end,
hose->mem_resources[i].flags);
bus->resource[i+1] = &hose->mem_resources[i];
}
DBG("PCI: PHB MEM offset = %016lx\n", hose->pci_mem_offset);
DBG("PCI: PHB IO offset = %08lx\n",
(unsigned long)hose->io_base_virt - _IO_BASE);
/* Get probe mode and perform scan */
mode = PCI_PROBE_NORMAL;
if (node && ppc_md.pci_probe_mode)
mode = ppc_md.pci_probe_mode(bus);
DBG(" probe mode: %d\n", mode);
if (mode == PCI_PROBE_DEVTREE) {
bus->subordinate = hose->last_busno;
of_scan_bus(node, bus);
}
if (mode == PCI_PROBE_NORMAL)
hose->last_busno = bus->subordinate = pci_scan_child_bus(bus);
}
static int __init pcibios_init(void)
{
struct pci_controller *hose, *tmp;
printk(KERN_INFO "PCI: Probing PCI hardware\n");
/* For now, override phys_mem_access_prot. If we need it,
* later, we may move that initialization to each ppc_md
*/
ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot;
if (pci_probe_only)
ppc_pci_flags |= PPC_PCI_PROBE_ONLY;
/* Scan all of the recorded PCI controllers. */
list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
scan_phb(hose);
pci_bus_add_devices(hose->bus);
}
/* Call common code to handle resource allocation */
pcibios_resource_survey();
printk(KERN_DEBUG "PCI: Probing PCI hardware done\n");
return 0;
}
subsys_initcall(pcibios_init);
#ifdef CONFIG_HOTPLUG
int pcibios_unmap_io_space(struct pci_bus *bus)
{
struct pci_controller *hose;
WARN_ON(bus == NULL);
/* If this is not a PHB, we only flush the hash table over
* the area mapped by this bridge. We don't play with the PTE
* mappings since we might have to deal with sub-page alignemnts
* so flushing the hash table is the only sane way to make sure
* that no hash entries are covering that removed bridge area
* while still allowing other busses overlapping those pages
*/
if (bus->self) {
struct resource *res = bus->resource[0];
DBG("IO unmapping for PCI-PCI bridge %s\n",
pci_name(bus->self));
__flush_hash_table_range(&init_mm, res->start + _IO_BASE,
res->end - res->start + 1);
return 0;
}
/* Get the host bridge */
hose = pci_bus_to_host(bus);
/* Check if we have IOs allocated */
if (hose->io_base_alloc == 0)
return 0;
DBG("IO unmapping for PHB %s\n", hose->dn->full_name);
DBG(" alloc=0x%p\n", hose->io_base_alloc);
/* This is a PHB, we fully unmap the IO area */
vunmap(hose->io_base_alloc);
return 0;
}
EXPORT_SYMBOL_GPL(pcibios_unmap_io_space);
#endif /* CONFIG_HOTPLUG */
int __devinit pcibios_map_io_space(struct pci_bus *bus)
{
struct vm_struct *area;
unsigned long phys_page;
unsigned long size_page;
unsigned long io_virt_offset;
struct pci_controller *hose;
WARN_ON(bus == NULL);
/* If this not a PHB, nothing to do, page tables still exist and
* thus HPTEs will be faulted in when needed
*/
if (bus->self) {
DBG("IO mapping for PCI-PCI bridge %s\n",
pci_name(bus->self));
DBG(" virt=0x%016lx...0x%016lx\n",
bus->resource[0]->start + _IO_BASE,
bus->resource[0]->end + _IO_BASE);
return 0;
}
/* Get the host bridge */
hose = pci_bus_to_host(bus);
phys_page = _ALIGN_DOWN(hose->io_base_phys, PAGE_SIZE);
size_page = _ALIGN_UP(hose->pci_io_size, PAGE_SIZE);
/* Make sure IO area address is clear */
hose->io_base_alloc = NULL;
/* If there's no IO to map on that bus, get away too */
if (hose->pci_io_size == 0 || hose->io_base_phys == 0)
return 0;
/* Let's allocate some IO space for that guy. We don't pass
* VM_IOREMAP because we don't care about alignment tricks that
* the core does in that case. Maybe we should due to stupid card
* with incomplete address decoding but I'd rather not deal with
* those outside of the reserved 64K legacy region.
*/
area = __get_vm_area(size_page, 0, PHB_IO_BASE, PHB_IO_END);
if (area == NULL)
return -ENOMEM;
hose->io_base_alloc = area->addr;
hose->io_base_virt = (void __iomem *)(area->addr +
hose->io_base_phys - phys_page);
DBG("IO mapping for PHB %s\n", hose->dn->full_name);
DBG(" phys=0x%016lx, virt=0x%p (alloc=0x%p)\n",
hose->io_base_phys, hose->io_base_virt, hose->io_base_alloc);
DBG(" size=0x%016lx (alloc=0x%016lx)\n",
hose->pci_io_size, size_page);
/* Establish the mapping */
if (__ioremap_at(phys_page, area->addr, size_page,
_PAGE_NO_CACHE | _PAGE_GUARDED) == NULL)
return -ENOMEM;
/* Fixup hose IO resource */
io_virt_offset = (unsigned long)hose->io_base_virt - _IO_BASE;
hose->io_resource.start += io_virt_offset;
hose->io_resource.end += io_virt_offset;
DBG(" hose->io_resource=0x%016lx...0x%016lx\n",
hose->io_resource.start, hose->io_resource.end);
return 0;
}
EXPORT_SYMBOL_GPL(pcibios_map_io_space);
void __devinit pcibios_setup_new_device(struct pci_dev *dev)
{
struct dev_archdata *sd = &dev->dev.archdata;
sd->of_node = pci_device_to_OF_node(dev);
DBG("PCI: device %s OF node: %s\n", pci_name(dev),
sd->of_node ? sd->of_node->full_name : "<none>");
sd->dma_ops = pci_dma_ops;
#ifdef CONFIG_NUMA
sd->numa_node = pcibus_to_node(dev->bus);
#else
sd->numa_node = -1;
#endif
if (ppc_md.pci_dma_dev_setup)
ppc_md.pci_dma_dev_setup(dev);
}
EXPORT_SYMBOL(pcibios_setup_new_device);
void __devinit pcibios_do_bus_setup(struct pci_bus *bus)
{
struct pci_dev *dev;
if (ppc_md.pci_dma_bus_setup)
ppc_md.pci_dma_bus_setup(bus);
list_for_each_entry(dev, &bus->devices, bus_list)
pcibios_setup_new_device(dev);
}
unsigned long pci_address_to_pio(phys_addr_t address)
{
struct pci_controller *hose, *tmp;
list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
if (address >= hose->io_base_phys &&
address < (hose->io_base_phys + hose->pci_io_size)) {
unsigned long base =
(unsigned long)hose->io_base_virt - _IO_BASE;
return base + (address - hose->io_base_phys);
}
}
return (unsigned int)-1;
}
EXPORT_SYMBOL_GPL(pci_address_to_pio);
#define IOBASE_BRIDGE_NUMBER 0
#define IOBASE_MEMORY 1
#define IOBASE_IO 2
#define IOBASE_ISA_IO 3
#define IOBASE_ISA_MEM 4
long sys_pciconfig_iobase(long which, unsigned long in_bus,
unsigned long in_devfn)
{
struct pci_controller* hose;
struct list_head *ln;
struct pci_bus *bus = NULL;
struct device_node *hose_node;
/* Argh ! Please forgive me for that hack, but that's the
* simplest way to get existing XFree to not lockup on some
* G5 machines... So when something asks for bus 0 io base
* (bus 0 is HT root), we return the AGP one instead.
*/
if (machine_is_compatible("MacRISC4"))
if (in_bus == 0)
in_bus = 0xf0;
/* That syscall isn't quite compatible with PCI domains, but it's
* used on pre-domains setup. We return the first match
*/
for (ln = pci_root_buses.next; ln != &pci_root_buses; ln = ln->next) {
bus = pci_bus_b(ln);
if (in_bus >= bus->number && in_bus <= bus->subordinate)
break;
bus = NULL;
}
if (bus == NULL || bus->sysdata == NULL)
return -ENODEV;
hose_node = (struct device_node *)bus->sysdata;
hose = PCI_DN(hose_node)->phb;
switch (which) {
case IOBASE_BRIDGE_NUMBER:
return (long)hose->first_busno;
case IOBASE_MEMORY:
return (long)hose->pci_mem_offset;
case IOBASE_IO:
return (long)hose->io_base_phys;
case IOBASE_ISA_IO:
return (long)isa_io_base;
case IOBASE_ISA_MEM:
return -EINVAL;
}
return -EOPNOTSUPP;
}
#ifdef CONFIG_NUMA
int pcibus_to_node(struct pci_bus *bus)
{
struct pci_controller *phb = pci_bus_to_host(bus);
return phb->node;
}
EXPORT_SYMBOL(pcibus_to_node);
#endif