Jean-Baptiste Maneyrol 881b556f6c iio: imu: inv_mpu6050: test whoami first and against all known values ... SPI bus is never generating error during transfer, so to check if a chip is correctly connected on a SPI bus we enforce whoami check to be correct. In this way we can assure SPI probe is failing if there is no chip connected. Note that this is really papering over boards that claim the device is there when it isn't. Not a bad thing to cope with, but not necessarily stable material. Fixes: cec0154556 ("iio: inv_mpu6050: Check WHO_AM_I register on probe") Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>		2017-06-13 21:18:17 +01:00
..
accel	iio: accel: mma9551: use NULL for GPIO connection ID	2017-06-11 16:05:53 +01:00
adc	iio: Aspeed ADC - Handle return value of clk_prepare_enable	2017-06-11 15:08:20 +01:00
amplifiers	spi: Updates for v4.4	2015-11-05 13:15:12 -08:00
buffer	iio:buffer.h - split into buffer.h and buffer_impl.h	2017-01-10 19:54:55 +00:00
chemical	drivers: iio: chemical: replace comma with a semicolon	2017-03-30 19:13:23 +01:00
common	iio hid-sensor-trigger: add Kconfig depends on IIO_BUFFER	2017-06-13 21:10:14 +01:00
counter	iio: pc104: Mask PC/104 drivers via the PC104 Kconfig option	2017-03-15 21:59:08 +00:00
dac	First set of new device support, features and cleanups for IIO in the 4.13 cycle	2017-05-29 15:53:42 +02:00
dummy	iio:dummy: Stop enabling timestamp by default.	2017-01-10 19:54:55 +00:00
frequency	iio: frequency: ad9523: use unsigned int rather then bare unsigned	2016-04-17 10:31:03 +01:00
gyro	Fourth set of IIO new device support, features and cleanups for the 4.12 cycle	2017-04-18 17:13:31 +02:00
health	First set of IIO new device support, features and cleanup for the 4.12 cycle.	2017-03-06 13:17:21 +01:00
humidity	iio: humidity: hts221: add power management support	2017-05-14 16:52:33 +01:00
imu	iio: imu: inv_mpu6050: test whoami first and against all known values	2017-06-13 21:18:17 +01:00
light	iio: light: rpr0521 channel numbers reordered	2017-05-21 15:06:15 +01:00
magnetometer	iio: magnetometer: st_magn_spi: fix spi_device_id table	2017-06-11 15:07:40 +01:00
orientation	iio: hid-sensor-rotation: Add "scale" and "offset" properties parse support	2017-05-07 12:22:36 +01:00
potentiometer	iio: max5481: Add support for Maxim digital potentiometers	2017-01-28 12:13:31 +00:00
potentiostat	iio: lmp91000: Set parent device	2017-02-19 12:01:52 +00:00
pressure	iio: pressure: zpa2326: report interrupted case as failure	2017-05-14 15:28:14 +01:00
proximity	iio: proximity: sx9500: Use devm_gpiod_get()	2017-06-11 15:07:34 +01:00
temperature	iio: temperature: maxim_thermocouple: add MAX31856 part	2017-05-07 12:36:41 +01:00
trigger	iio: make stm32 trigger driver use INDIO_HARDWARE_TRIGGERED mode	2017-06-11 15:59:05 +01:00
iio_core_trigger.h
iio_core.h	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
industrialio-buffer.c	sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>	2017-03-02 08:42:32 +01:00
industrialio-configfs.c	iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem	2015-12-05 16:25:30 +00:00
industrialio-core.c	iio: add hardware triggered operating mode	2017-06-11 15:58:41 +01:00
industrialio-event.c	iio: iio_push_event(): Don't crash if the event interface is not registered	2016-09-10 16:40:44 +01:00
industrialio-sw-device.c	iio: Add support for creating IIO devices via configfs	2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c	iio: core: fix ptr_ret.cocci warnings	2016-01-20 17:09:18 -08:00
industrialio-trigger.c	iio: trigger: clean up viio_trigger_alloc()	2017-01-22 13:37:34 +00:00
industrialio-triggered-event.c
inkern.c	iio: inkern: fix a static checker error	2017-04-26 06:04:06 +01:00
Kconfig	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00
Makefile	iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8	2016-10-01 17:06:21 +01:00