2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-29 15:43:59 +08:00
linux-next/arch/arm/boot/dts/armada-370-mirabox.dts
Ryan Press 879d68a445 arm: mvebu: Fix pinctrl for Armada 370 Mirabox SDIO port.
The previous configuration used the wrong "clk" pin.  Without this
change mv_sdio worked because the bootloader would set the pin up, but
with a bootloader that does not set the pin, mv_sdio fails to detect any
card.

I have tested this change using a mwifiex_sdio wireless network adapter
over the SDIO interface.

Signed-off-by: Ryan Press <ryan@presslab.us>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-03-28 17:29:23 +00:00

75 lines
1.3 KiB
Plaintext

/*
* Device Tree file for Globalscale Mirabox
*
* Gregory CLEMENT <gregory.clement@free-electrons.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
/dts-v1/;
/include/ "armada-370.dtsi"
/ {
model = "Globalscale Mirabox";
compatible = "globalscale,mirabox", "marvell,armada370", "marvell,armada-370-xp";
chosen {
bootargs = "console=ttyS0,115200 earlyprintk";
};
memory {
device_type = "memory";
reg = <0x00000000 0x20000000>; /* 512 MB */
};
soc {
serial@d0012000 {
clock-frequency = <200000000>;
status = "okay";
};
timer@d0020300 {
clock-frequency = <600000000>;
status = "okay";
};
mdio {
phy0: ethernet-phy@0 {
reg = <0>;
};
phy1: ethernet-phy@1 {
reg = <1>;
};
};
ethernet@d0070000 {
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
};
ethernet@d0074000 {
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
};
mvsdio@d00d4000 {
pinctrl-0 = <&sdio_pins3>;
pinctrl-names = "default";
status = "okay";
/*
* No CD or WP GPIOs: SDIO interface used for
* Wifi/Bluetooth chip
*/
};
usb@d0050000 {
status = "okay";
};
usb@d0051000 {
status = "okay";
};
};
};