mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-22 20:23:57 +08:00
3821a065f5
An spi_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
321 lines
7.2 KiB
C
321 lines
7.2 KiB
C
/*
|
|
* Support Infineon TLE62x0 driver chips
|
|
*
|
|
* Copyright (c) 2007 Simtec Electronics
|
|
* Ben Dooks, <ben@simtec.co.uk>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/tle62x0.h>
|
|
|
|
|
|
#define CMD_READ 0x00
|
|
#define CMD_SET 0xff
|
|
|
|
#define DIAG_NORMAL 0x03
|
|
#define DIAG_OVERLOAD 0x02
|
|
#define DIAG_OPEN 0x01
|
|
#define DIAG_SHORTGND 0x00
|
|
|
|
struct tle62x0_state {
|
|
struct spi_device *us;
|
|
struct mutex lock;
|
|
unsigned int nr_gpio;
|
|
unsigned int gpio_state;
|
|
|
|
unsigned char tx_buff[4];
|
|
unsigned char rx_buff[4];
|
|
};
|
|
|
|
static int to_gpio_num(struct device_attribute *attr);
|
|
|
|
static inline int tle62x0_write(struct tle62x0_state *st)
|
|
{
|
|
unsigned char *buff = st->tx_buff;
|
|
unsigned int gpio_state = st->gpio_state;
|
|
|
|
buff[0] = CMD_SET;
|
|
|
|
if (st->nr_gpio == 16) {
|
|
buff[1] = gpio_state >> 8;
|
|
buff[2] = gpio_state;
|
|
} else {
|
|
buff[1] = gpio_state;
|
|
}
|
|
|
|
dev_dbg(&st->us->dev, "buff %3ph\n", buff);
|
|
|
|
return spi_write(st->us, buff, (st->nr_gpio == 16) ? 3 : 2);
|
|
}
|
|
|
|
static inline int tle62x0_read(struct tle62x0_state *st)
|
|
{
|
|
unsigned char *txbuff = st->tx_buff;
|
|
struct spi_transfer xfer = {
|
|
.tx_buf = txbuff,
|
|
.rx_buf = st->rx_buff,
|
|
.len = (st->nr_gpio * 2) / 8,
|
|
};
|
|
struct spi_message msg;
|
|
|
|
txbuff[0] = CMD_READ;
|
|
txbuff[1] = 0x00;
|
|
txbuff[2] = 0x00;
|
|
txbuff[3] = 0x00;
|
|
|
|
spi_message_init(&msg);
|
|
spi_message_add_tail(&xfer, &msg);
|
|
|
|
return spi_sync(st->us, &msg);
|
|
}
|
|
|
|
static unsigned char *decode_fault(unsigned int fault_code)
|
|
{
|
|
fault_code &= 3;
|
|
|
|
switch (fault_code) {
|
|
case DIAG_NORMAL:
|
|
return "N";
|
|
case DIAG_OVERLOAD:
|
|
return "V";
|
|
case DIAG_OPEN:
|
|
return "O";
|
|
case DIAG_SHORTGND:
|
|
return "G";
|
|
}
|
|
|
|
return "?";
|
|
}
|
|
|
|
static ssize_t tle62x0_status_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct tle62x0_state *st = dev_get_drvdata(dev);
|
|
char *bp = buf;
|
|
unsigned char *buff = st->rx_buff;
|
|
unsigned long fault = 0;
|
|
int ptr;
|
|
int ret;
|
|
|
|
mutex_lock(&st->lock);
|
|
ret = tle62x0_read(st);
|
|
dev_dbg(dev, "tle62x0_read() returned %d\n", ret);
|
|
if (ret < 0) {
|
|
mutex_unlock(&st->lock);
|
|
return ret;
|
|
}
|
|
|
|
for (ptr = 0; ptr < (st->nr_gpio * 2)/8; ptr += 1) {
|
|
fault <<= 8;
|
|
fault |= ((unsigned long)buff[ptr]);
|
|
|
|
dev_dbg(dev, "byte %d is %02x\n", ptr, buff[ptr]);
|
|
}
|
|
|
|
for (ptr = 0; ptr < st->nr_gpio; ptr++) {
|
|
bp += sprintf(bp, "%s ", decode_fault(fault >> (ptr * 2)));
|
|
}
|
|
|
|
*bp++ = '\n';
|
|
|
|
mutex_unlock(&st->lock);
|
|
return bp - buf;
|
|
}
|
|
|
|
static DEVICE_ATTR(status_show, S_IRUGO, tle62x0_status_show, NULL);
|
|
|
|
static ssize_t tle62x0_gpio_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct tle62x0_state *st = dev_get_drvdata(dev);
|
|
int gpio_num = to_gpio_num(attr);
|
|
int value;
|
|
|
|
mutex_lock(&st->lock);
|
|
value = (st->gpio_state >> gpio_num) & 1;
|
|
mutex_unlock(&st->lock);
|
|
|
|
return snprintf(buf, PAGE_SIZE, "%d", value);
|
|
}
|
|
|
|
static ssize_t tle62x0_gpio_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t len)
|
|
{
|
|
struct tle62x0_state *st = dev_get_drvdata(dev);
|
|
int gpio_num = to_gpio_num(attr);
|
|
unsigned long val;
|
|
char *endp;
|
|
|
|
val = simple_strtoul(buf, &endp, 0);
|
|
if (buf == endp)
|
|
return -EINVAL;
|
|
|
|
dev_dbg(dev, "setting gpio %d to %ld\n", gpio_num, val);
|
|
|
|
mutex_lock(&st->lock);
|
|
|
|
if (val)
|
|
st->gpio_state |= 1 << gpio_num;
|
|
else
|
|
st->gpio_state &= ~(1 << gpio_num);
|
|
|
|
tle62x0_write(st);
|
|
mutex_unlock(&st->lock);
|
|
|
|
return len;
|
|
}
|
|
|
|
static DEVICE_ATTR(gpio1, S_IWUSR|S_IRUGO,
|
|
tle62x0_gpio_show, tle62x0_gpio_store);
|
|
static DEVICE_ATTR(gpio2, S_IWUSR|S_IRUGO,
|
|
tle62x0_gpio_show, tle62x0_gpio_store);
|
|
static DEVICE_ATTR(gpio3, S_IWUSR|S_IRUGO,
|
|
tle62x0_gpio_show, tle62x0_gpio_store);
|
|
static DEVICE_ATTR(gpio4, S_IWUSR|S_IRUGO,
|
|
tle62x0_gpio_show, tle62x0_gpio_store);
|
|
static DEVICE_ATTR(gpio5, S_IWUSR|S_IRUGO,
|
|
tle62x0_gpio_show, tle62x0_gpio_store);
|
|
static DEVICE_ATTR(gpio6, S_IWUSR|S_IRUGO,
|
|
tle62x0_gpio_show, tle62x0_gpio_store);
|
|
static DEVICE_ATTR(gpio7, S_IWUSR|S_IRUGO,
|
|
tle62x0_gpio_show, tle62x0_gpio_store);
|
|
static DEVICE_ATTR(gpio8, S_IWUSR|S_IRUGO,
|
|
tle62x0_gpio_show, tle62x0_gpio_store);
|
|
static DEVICE_ATTR(gpio9, S_IWUSR|S_IRUGO,
|
|
tle62x0_gpio_show, tle62x0_gpio_store);
|
|
static DEVICE_ATTR(gpio10, S_IWUSR|S_IRUGO,
|
|
tle62x0_gpio_show, tle62x0_gpio_store);
|
|
static DEVICE_ATTR(gpio11, S_IWUSR|S_IRUGO,
|
|
tle62x0_gpio_show, tle62x0_gpio_store);
|
|
static DEVICE_ATTR(gpio12, S_IWUSR|S_IRUGO,
|
|
tle62x0_gpio_show, tle62x0_gpio_store);
|
|
static DEVICE_ATTR(gpio13, S_IWUSR|S_IRUGO,
|
|
tle62x0_gpio_show, tle62x0_gpio_store);
|
|
static DEVICE_ATTR(gpio14, S_IWUSR|S_IRUGO,
|
|
tle62x0_gpio_show, tle62x0_gpio_store);
|
|
static DEVICE_ATTR(gpio15, S_IWUSR|S_IRUGO,
|
|
tle62x0_gpio_show, tle62x0_gpio_store);
|
|
static DEVICE_ATTR(gpio16, S_IWUSR|S_IRUGO,
|
|
tle62x0_gpio_show, tle62x0_gpio_store);
|
|
|
|
static struct device_attribute *gpio_attrs[] = {
|
|
[0] = &dev_attr_gpio1,
|
|
[1] = &dev_attr_gpio2,
|
|
[2] = &dev_attr_gpio3,
|
|
[3] = &dev_attr_gpio4,
|
|
[4] = &dev_attr_gpio5,
|
|
[5] = &dev_attr_gpio6,
|
|
[6] = &dev_attr_gpio7,
|
|
[7] = &dev_attr_gpio8,
|
|
[8] = &dev_attr_gpio9,
|
|
[9] = &dev_attr_gpio10,
|
|
[10] = &dev_attr_gpio11,
|
|
[11] = &dev_attr_gpio12,
|
|
[12] = &dev_attr_gpio13,
|
|
[13] = &dev_attr_gpio14,
|
|
[14] = &dev_attr_gpio15,
|
|
[15] = &dev_attr_gpio16
|
|
};
|
|
|
|
static int to_gpio_num(struct device_attribute *attr)
|
|
{
|
|
int ptr;
|
|
|
|
for (ptr = 0; ptr < ARRAY_SIZE(gpio_attrs); ptr++) {
|
|
if (gpio_attrs[ptr] == attr)
|
|
return ptr;
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
|
|
static int tle62x0_probe(struct spi_device *spi)
|
|
{
|
|
struct tle62x0_state *st;
|
|
struct tle62x0_pdata *pdata;
|
|
int ptr;
|
|
int ret;
|
|
|
|
pdata = dev_get_platdata(&spi->dev);
|
|
if (pdata == NULL) {
|
|
dev_err(&spi->dev, "no device data specified\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
st = kzalloc(sizeof(struct tle62x0_state), GFP_KERNEL);
|
|
if (st == NULL)
|
|
return -ENOMEM;
|
|
|
|
st->us = spi;
|
|
st->nr_gpio = pdata->gpio_count;
|
|
st->gpio_state = pdata->init_state;
|
|
|
|
mutex_init(&st->lock);
|
|
|
|
ret = device_create_file(&spi->dev, &dev_attr_status_show);
|
|
if (ret) {
|
|
dev_err(&spi->dev, "cannot create status attribute\n");
|
|
goto err_status;
|
|
}
|
|
|
|
for (ptr = 0; ptr < pdata->gpio_count; ptr++) {
|
|
ret = device_create_file(&spi->dev, gpio_attrs[ptr]);
|
|
if (ret) {
|
|
dev_err(&spi->dev, "cannot create gpio attribute\n");
|
|
goto err_gpios;
|
|
}
|
|
}
|
|
|
|
/* tle62x0_write(st); */
|
|
spi_set_drvdata(spi, st);
|
|
return 0;
|
|
|
|
err_gpios:
|
|
while (--ptr >= 0)
|
|
device_remove_file(&spi->dev, gpio_attrs[ptr]);
|
|
|
|
device_remove_file(&spi->dev, &dev_attr_status_show);
|
|
|
|
err_status:
|
|
kfree(st);
|
|
return ret;
|
|
}
|
|
|
|
static int tle62x0_remove(struct spi_device *spi)
|
|
{
|
|
struct tle62x0_state *st = spi_get_drvdata(spi);
|
|
int ptr;
|
|
|
|
for (ptr = 0; ptr < st->nr_gpio; ptr++)
|
|
device_remove_file(&spi->dev, gpio_attrs[ptr]);
|
|
|
|
device_remove_file(&spi->dev, &dev_attr_status_show);
|
|
kfree(st);
|
|
return 0;
|
|
}
|
|
|
|
static struct spi_driver tle62x0_driver = {
|
|
.driver = {
|
|
.name = "tle62x0",
|
|
},
|
|
.probe = tle62x0_probe,
|
|
.remove = tle62x0_remove,
|
|
};
|
|
|
|
module_spi_driver(tle62x0_driver);
|
|
|
|
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
|
|
MODULE_DESCRIPTION("TLE62x0 SPI driver");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("spi:tle62x0");
|