renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 06:34:11 +08:00
Code
869184a675
linux-next/arch/parisc/include/asm/pdc.h
Alexander Beregalov d845e1fbf2 parisc: asm/pdc.h should include asm/page.h 
Fixes this build error:
arch/parisc/kernel/pdc_cons.c:117: error: '__PAGE_OFFSET' undeclared

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
2009-04-02 00:20:15 +00:00

768 lines
25 KiB
C
Raw Blame History

#ifndef _PARISC_PDC_H
#define _PARISC_PDC_H
/*
* PDC return values ...
* All PDC calls return a subset of these errors.
*/
#define PDC_WARN 3 /* Call completed with a warning */
#define PDC_REQ_ERR_1 2 /* See above */
#define PDC_REQ_ERR_0 1 /* Call would generate a requestor error */
#define PDC_OK 0 /* Call completed successfully */
#define PDC_BAD_PROC -1 /* Called non-existent procedure*/
#define PDC_BAD_OPTION -2 /* Called with non-existent option */
#define PDC_ERROR -3 /* Call could not complete without an error */
#define PDC_NE_MOD -5 /* Module not found */
#define PDC_NE_CELL_MOD -7 /* Cell module not found */
#define PDC_INVALID_ARG -10 /* Called with an invalid argument */
#define PDC_BUS_POW_WARN -12 /* Call could not complete in allowed power budget */
#define PDC_NOT_NARROW -17 /* Narrow mode not supported */
/*
* PDC entry points...
*/
#define PDC_POW_FAIL 1 /* perform a power-fail */
#define PDC_POW_FAIL_PREPARE 0 /* prepare for powerfail */
#define PDC_CHASSIS 2 /* PDC-chassis functions */
#define PDC_CHASSIS_DISP 0 /* update chassis display */
#define PDC_CHASSIS_WARN 1 /* return chassis warnings */
#define PDC_CHASSIS_DISPWARN 2 /* update&return chassis status */
#define PDC_RETURN_CHASSIS_INFO 128 /* HVERSION dependent: return chassis LED/LCD info */
#define PDC_PIM 3 /* Get PIM data */
#define PDC_PIM_HPMC 0 /* Transfer HPMC data */
#define PDC_PIM_RETURN_SIZE 1 /* Get Max buffer needed for PIM*/
#define PDC_PIM_LPMC 2 /* Transfer HPMC data */
#define PDC_PIM_SOFT_BOOT 3 /* Transfer Soft Boot data */
#define PDC_PIM_TOC 4 /* Transfer TOC data */
#define PDC_MODEL 4 /* PDC model information call */
#define PDC_MODEL_INFO 0 /* returns information */
#define PDC_MODEL_BOOTID 1 /* set the BOOT_ID */
#define PDC_MODEL_VERSIONS 2 /* returns cpu-internal versions*/
#define PDC_MODEL_SYSMODEL 3 /* return system model info */
#define PDC_MODEL_ENSPEC 4 /* enable specific option */
#define PDC_MODEL_DISPEC 5 /* disable specific option */
#define PDC_MODEL_CPU_ID 6 /* returns cpu-id (only newer machines!) */
#define PDC_MODEL_CAPABILITIES 7 /* returns OS32/OS64-flags */
/* Values for PDC_MODEL_CAPABILITIES non-equivalent virtual aliasing support */
#define PDC_MODEL_OS64 (1 << 0)
#define PDC_MODEL_OS32 (1 << 1)
#define PDC_MODEL_IOPDIR_FDC (1 << 2)
#define PDC_MODEL_NVA_MASK (3 << 4)
#define PDC_MODEL_NVA_SUPPORTED (0 << 4)
#define PDC_MODEL_NVA_SLOW (1 << 4)
#define PDC_MODEL_NVA_UNSUPPORTED (3 << 4)
#define PDC_MODEL_GET_BOOT__OP 8 /* returns boot test options */
#define PDC_MODEL_SET_BOOT__OP 9 /* set boot test options */
#define PA89_INSTRUCTION_SET 0x4 /* capatibilies returned */
#define PA90_INSTRUCTION_SET 0x8
#define PDC_CACHE 5 /* return/set cache (& TLB) info*/
#define PDC_CACHE_INFO 0 /* returns information */
#define PDC_CACHE_SET_COH 1 /* set coherence state */
#define PDC_CACHE_RET_SPID 2 /* returns space-ID bits */
#define PDC_HPA 6 /* return HPA of processor */
#define PDC_HPA_PROCESSOR 0
#define PDC_HPA_MODULES 1
#define PDC_COPROC 7 /* Co-Processor (usually FP unit(s)) */
#define PDC_COPROC_CFG 0 /* Co-Processor Cfg (FP unit(s) enabled?) */
#define PDC_IODC 8 /* talk to IODC */
#define PDC_IODC_READ 0 /* read IODC entry point */
/* PDC_IODC_RI_ * INDEX parameter of PDC_IODC_READ */
#define PDC_IODC_RI_DATA_BYTES 0 /* IODC Data Bytes */
/* 1, 2 obsolete - HVERSION dependent*/
#define PDC_IODC_RI_INIT 3 /* Initialize module */
#define PDC_IODC_RI_IO 4 /* Module input/output */
#define PDC_IODC_RI_SPA 5 /* Module input/output */
#define PDC_IODC_RI_CONFIG 6 /* Module input/output */
/* 7 obsolete - HVERSION dependent */
#define PDC_IODC_RI_TEST 8 /* Module input/output */
#define PDC_IODC_RI_TLB 9 /* Module input/output */
#define PDC_IODC_NINIT 2 /* non-destructive init */
#define PDC_IODC_DINIT 3 /* destructive init */
#define PDC_IODC_MEMERR 4 /* check for memory errors */
#define PDC_IODC_INDEX_DATA 0 /* get first 16 bytes from mod IODC */
#define PDC_IODC_BUS_ERROR -4 /* bus error return value */
#define PDC_IODC_INVALID_INDEX -5 /* invalid index return value */
#define PDC_IODC_COUNT -6 /* count is too small */
#define PDC_TOD 9 /* time-of-day clock (TOD) */
#define PDC_TOD_READ 0 /* read TOD */
#define PDC_TOD_WRITE 1 /* write TOD */
#define PDC_STABLE 10 /* stable storage (sprockets) */
#define PDC_STABLE_READ 0
#define PDC_STABLE_WRITE 1
#define PDC_STABLE_RETURN_SIZE 2
#define PDC_STABLE_VERIFY_CONTENTS 3
#define PDC_STABLE_INITIALIZE 4
#define PDC_NVOLATILE 11 /* often not implemented */
#define PDC_ADD_VALID 12 /* Memory validation PDC call */
#define PDC_ADD_VALID_VERIFY 0 /* Make PDC_ADD_VALID verify region */
#define PDC_INSTR 15 /* get instr to invoke PDCE_CHECK() */
#define PDC_PROC 16 /* (sprockets) */
#define PDC_CONFIG 16 /* (sprockets) */
#define PDC_CONFIG_DECONFIG 0
#define PDC_CONFIG_DRECONFIG 1
#define PDC_CONFIG_DRETURN_CONFIG 2
#define PDC_BLOCK_TLB 18 /* manage hardware block-TLB */
#define PDC_BTLB_INFO 0 /* returns parameter */
#define PDC_BTLB_INSERT 1 /* insert BTLB entry */
#define PDC_BTLB_PURGE 2 /* purge BTLB entries */
#define PDC_BTLB_PURGE_ALL 3 /* purge all BTLB entries */
#define PDC_TLB 19 /* manage hardware TLB miss handling */
#define PDC_TLB_INFO 0 /* returns parameter */
#define PDC_TLB_SETUP 1 /* set up miss handling */
#define PDC_MEM 20 /* Manage memory */
#define PDC_MEM_MEMINFO 0
#define PDC_MEM_ADD_PAGE 1
#define PDC_MEM_CLEAR_PDT 2
#define PDC_MEM_READ_PDT 3
#define PDC_MEM_RESET_CLEAR 4
#define PDC_MEM_GOODMEM 5
#define PDC_MEM_TABLE 128 /* Non contig mem map (sprockets) */
#define PDC_MEM_RETURN_ADDRESS_TABLE PDC_MEM_TABLE
#define PDC_MEM_GET_MEMORY_SYSTEM_TABLES_SIZE 131
#define PDC_MEM_GET_MEMORY_SYSTEM_TABLES 132
#define PDC_MEM_GET_PHYSICAL_LOCATION_FROM_MEMORY_ADDRESS 133
#define PDC_MEM_RET_SBE_REPLACED 5 /* PDC_MEM return values */
#define PDC_MEM_RET_DUPLICATE_ENTRY 4
#define PDC_MEM_RET_BUF_SIZE_SMALL 1
#define PDC_MEM_RET_PDT_FULL -11
#define PDC_MEM_RET_INVALID_PHYSICAL_LOCATION ~0ULL
#define PDC_PSW 21 /* Get/Set default System Mask */
#define PDC_PSW_MASK 0 /* Return mask */
#define PDC_PSW_GET_DEFAULTS 1 /* Return defaults */
#define PDC_PSW_SET_DEFAULTS 2 /* Set default */
#define PDC_PSW_ENDIAN_BIT 1 /* set for big endian */
#define PDC_PSW_WIDE_BIT 2 /* set for wide mode */
#define PDC_SYSTEM_MAP 22 /* find system modules */
#define PDC_FIND_MODULE 0
#define PDC_FIND_ADDRESS 1
#define PDC_TRANSLATE_PATH 2
#define PDC_SOFT_POWER 23 /* soft power switch */
#define PDC_SOFT_POWER_INFO 0 /* return info about the soft power switch */
#define PDC_SOFT_POWER_ENABLE 1 /* enable/disable soft power switch */
/* HVERSION dependent */
/* The PDC_MEM_MAP calls */
#define PDC_MEM_MAP 128 /* on s700: return page info */
#define PDC_MEM_MAP_HPA 0 /* returns hpa of a module */
#define PDC_EEPROM 129 /* EEPROM access */
#define PDC_EEPROM_READ_WORD 0
#define PDC_EEPROM_WRITE_WORD 1
#define PDC_EEPROM_READ_BYTE 2
#define PDC_EEPROM_WRITE_BYTE 3
#define PDC_EEPROM_EEPROM_PASSWORD -1000
#define PDC_NVM 130 /* NVM (non-volatile memory) access */
#define PDC_NVM_READ_WORD 0
#define PDC_NVM_WRITE_WORD 1
#define PDC_NVM_READ_BYTE 2
#define PDC_NVM_WRITE_BYTE 3
#define PDC_SEED_ERROR 132 /* (sprockets) */
#define PDC_IO 135 /* log error info, reset IO system */
#define PDC_IO_READ_AND_CLEAR_ERRORS 0
#define PDC_IO_RESET 1
#define PDC_IO_RESET_DEVICES 2
/* sets bits 6&7 (little endian) of the HcControl Register */
#define PDC_IO_USB_SUSPEND 0xC000000000000000
#define PDC_IO_EEPROM_IO_ERR_TABLE_FULL -5 /* return value */
#define PDC_IO_NO_SUSPEND -6 /* return value */
#define PDC_BROADCAST_RESET 136 /* reset all processors */
#define PDC_DO_RESET 0 /* option: perform a broadcast reset */
#define PDC_DO_FIRM_TEST_RESET 1 /* Do broadcast reset with bitmap */
#define PDC_BR_RECONFIGURATION 2 /* reset w/reconfiguration */
#define PDC_FIRM_TEST_MAGIC 0xab9ec36fUL /* for this reboot only */
#define PDC_LAN_STATION_ID 138 /* Hversion dependent mechanism for */
#define PDC_LAN_STATION_ID_READ 0 /* getting the lan station address */
#define PDC_LAN_STATION_ID_SIZE 6
#define PDC_CHECK_RANGES 139 /* (sprockets) */
#define PDC_NV_SECTIONS 141 /* (sprockets) */
#define PDC_PERFORMANCE 142 /* performance monitoring */
#define PDC_SYSTEM_INFO 143 /* system information */
#define PDC_SYSINFO_RETURN_INFO_SIZE 0
#define PDC_SYSINFO_RRETURN_SYS_INFO 1
#define PDC_SYSINFO_RRETURN_ERRORS 2
#define PDC_SYSINFO_RRETURN_WARNINGS 3
#define PDC_SYSINFO_RETURN_REVISIONS 4
#define PDC_SYSINFO_RRETURN_DIAGNOSE 5
#define PDC_SYSINFO_RRETURN_HV_DIAGNOSE 1005
#define PDC_RDR 144 /* (sprockets) */
#define PDC_RDR_READ_BUFFER 0
#define PDC_RDR_READ_SINGLE 1
#define PDC_RDR_WRITE_SINGLE 2
#define PDC_INTRIGUE 145 /* (sprockets) */
#define PDC_INTRIGUE_WRITE_BUFFER 0
#define PDC_INTRIGUE_GET_SCRATCH_BUFSIZE 1
#define PDC_INTRIGUE_START_CPU_COUNTERS 2
#define PDC_INTRIGUE_STOP_CPU_COUNTERS 3
#define PDC_STI 146 /* STI access */
/* same as PDC_PCI_XXX values (see below) */
/* Legacy PDC definitions for same stuff */
#define PDC_PCI_INDEX 147
#define PDC_PCI_INTERFACE_INFO 0
#define PDC_PCI_SLOT_INFO 1
#define PDC_PCI_INFLIGHT_BYTES 2
#define PDC_PCI_READ_CONFIG 3
#define PDC_PCI_WRITE_CONFIG 4
#define PDC_PCI_READ_PCI_IO 5
#define PDC_PCI_WRITE_PCI_IO 6
#define PDC_PCI_READ_CONFIG_DELAY 7
#define PDC_PCI_UPDATE_CONFIG_DELAY 8
#define PDC_PCI_PCI_PATH_TO_PCI_HPA 9
#define PDC_PCI_PCI_HPA_TO_PCI_PATH 10
#define PDC_PCI_PCI_PATH_TO_PCI_BUS 11
#define PDC_PCI_PCI_RESERVED 12
#define PDC_PCI_PCI_INT_ROUTE_SIZE 13
#define PDC_PCI_GET_INT_TBL_SIZE PDC_PCI_PCI_INT_ROUTE_SIZE
#define PDC_PCI_PCI_INT_ROUTE 14
#define PDC_PCI_GET_INT_TBL PDC_PCI_PCI_INT_ROUTE
#define PDC_PCI_READ_MON_TYPE 15
#define PDC_PCI_WRITE_MON_TYPE 16
/* Get SCSI Interface Card info: SDTR, SCSI ID, mode (SE vs LVD) */
#define PDC_INITIATOR 163
#define PDC_GET_INITIATOR 0
#define PDC_SET_INITIATOR 1
#define PDC_DELETE_INITIATOR 2
#define PDC_RETURN_TABLE_SIZE 3
#define PDC_RETURN_TABLE 4
#define PDC_LINK 165 /* (sprockets) */
#define PDC_LINK_PCI_ENTRY_POINTS 0 /* list (Arg1) = 0 */
#define PDC_LINK_USB_ENTRY_POINTS 1 /* list (Arg1) = 1 */
/* cl_class
* page 3-33 of IO-Firmware ARS
* IODC ENTRY_INIT(Search first) RET[1]
*/
#define CL_NULL 0 /* invalid */
#define CL_RANDOM 1 /* random access (as disk) */
#define CL_SEQU 2 /* sequential access (as tape) */
#define CL_DUPLEX 7 /* full-duplex point-to-point (RS-232, Net) */
#define CL_KEYBD 8 /* half-duplex console (HIL Keyboard) */
#define CL_DISPL 9 /* half-duplex console (display) */
#define CL_FC 10 /* FiberChannel access media */
/* IODC ENTRY_INIT() */
#define ENTRY_INIT_SRCH_FRST 2
#define ENTRY_INIT_SRCH_NEXT 3
#define ENTRY_INIT_MOD_DEV 4
#define ENTRY_INIT_DEV 5
#define ENTRY_INIT_MOD 6
#define ENTRY_INIT_MSG 9
/* IODC ENTRY_IO() */
#define ENTRY_IO_BOOTIN 0
#define ENTRY_IO_BOOTOUT 1
#define ENTRY_IO_CIN 2
#define ENTRY_IO_COUT 3
#define ENTRY_IO_CLOSE 4
#define ENTRY_IO_GETMSG 9
#define ENTRY_IO_BBLOCK_IN 16
#define ENTRY_IO_BBLOCK_OUT 17
/* IODC ENTRY_SPA() */
/* IODC ENTRY_CONFIG() */
/* IODC ENTRY_TEST() */
/* IODC ENTRY_TLB() */
/* constants for OS (NVM...) */
#define OS_ID_NONE 0 /* Undefined OS ID */
#define OS_ID_HPUX 1 /* HP-UX OS */
#define OS_ID_MPEXL 2 /* MPE XL OS */
#define OS_ID_OSF 3 /* OSF OS */
#define OS_ID_HPRT 4 /* HP-RT OS */
#define OS_ID_NOVEL 5 /* NOVELL OS */
#define OS_ID_LINUX 6 /* Linux */
/* constants for PDC_CHASSIS */
#define OSTAT_OFF 0
#define OSTAT_FLT 1
#define OSTAT_TEST 2
#define OSTAT_INIT 3
#define OSTAT_SHUT 4
#define OSTAT_WARN 5
#define OSTAT_RUN 6
#define OSTAT_ON 7
/* Page Zero constant offsets used by the HPMC handler */
#define BOOT_CONSOLE_HPA_OFFSET 0x3c0
#define BOOT_CONSOLE_SPA_OFFSET 0x3c4
#define BOOT_CONSOLE_PATH_OFFSET 0x3a8
/* size of the pdc_result buffer for firmware.c */
#define NUM_PDC_RESULT 32
#if !defined(__ASSEMBLY__)
#include <linux/types.h>
#ifdef __KERNEL__
#include <asm/page.h> /* for __PAGE_OFFSET */
extern int pdc_type;
/* Values for pdc_type */
#define PDC_TYPE_ILLEGAL -1
#define PDC_TYPE_PAT 0 /* 64-bit PAT-PDC */
#define PDC_TYPE_SYSTEM_MAP 1 /* 32-bit, but supports PDC_SYSTEM_MAP */
#define PDC_TYPE_SNAKE 2 /* Doesn't support SYSTEM_MAP */
struct pdc_chassis_info { /* for PDC_CHASSIS_INFO */
unsigned long actcnt; /* actual number of bytes returned */
unsigned long maxcnt; /* maximum number of bytes that could be returned */
};
struct pdc_coproc_cfg { /* for PDC_COPROC_CFG */
unsigned long ccr_functional;
unsigned long ccr_present;
unsigned long revision;
unsigned long model;
};
struct pdc_model { /* for PDC_MODEL */
unsigned long hversion;
unsigned long sversion;
unsigned long hw_id;
unsigned long boot_id;
unsigned long sw_id;
unsigned long sw_cap;
unsigned long arch_rev;
unsigned long pot_key;
unsigned long curr_key;
};
struct pdc_cache_cf { /* for PDC_CACHE (I/D-caches) */
unsigned long
#ifdef CONFIG_64BIT
cc_padW:32,
#endif
cc_alias: 4, /* alias boundaries for virtual addresses */
cc_block: 4, /* to determine most efficient stride */
cc_line : 3, /* maximum amount written back as a result of store (multiple of 16 bytes) */
cc_shift: 2, /* how much to shift cc_block left */
cc_wt : 1, /* 0 = WT-Dcache, 1 = WB-Dcache */
cc_sh : 2, /* 0 = separate I/D-cache, else shared I/D-cache */
cc_cst : 3, /* 0 = incoherent D-cache, 1=coherent D-cache */
cc_pad1 : 10, /* reserved */
cc_hv : 3; /* hversion dependent */
};
struct pdc_tlb_cf { /* for PDC_CACHE (I/D-TLB's) */
unsigned long tc_pad0:12, /* reserved */
#ifdef CONFIG_64BIT
tc_padW:32,
#endif
tc_sh : 2, /* 0 = separate I/D-TLB, else shared I/D-TLB */
tc_hv : 1, /* HV */
tc_page : 1, /* 0 = 2K page-size-machine, 1 = 4k page size */
tc_cst : 3, /* 0 = incoherent operations, else coherent operations */
tc_aid : 5, /* ITLB: width of access ids of processor (encoded!) */
tc_pad1 : 8; /* ITLB: width of space-registers (encoded) */
};
struct pdc_cache_info { /* main-PDC_CACHE-structure (caches & TLB's) */
/* I-cache */
unsigned long ic_size; /* size in bytes */
struct pdc_cache_cf ic_conf; /* configuration */
unsigned long ic_base; /* base-addr */
unsigned long ic_stride;
unsigned long ic_count;
unsigned long ic_loop;
/* D-cache */
unsigned long dc_size; /* size in bytes */
struct pdc_cache_cf dc_conf; /* configuration */
unsigned long dc_base; /* base-addr */
unsigned long dc_stride;
unsigned long dc_count;
unsigned long dc_loop;
/* Instruction-TLB */
unsigned long it_size; /* number of entries in I-TLB */
struct pdc_tlb_cf it_conf; /* I-TLB-configuration */
unsigned long it_sp_base;
unsigned long it_sp_stride;
unsigned long it_sp_count;
unsigned long it_off_base;
unsigned long it_off_stride;
unsigned long it_off_count;
unsigned long it_loop;
/* data-TLB */
unsigned long dt_size; /* number of entries in D-TLB */
struct pdc_tlb_cf dt_conf; /* D-TLB-configuration */
unsigned long dt_sp_base;
unsigned long dt_sp_stride;
unsigned long dt_sp_count;
unsigned long dt_off_base;
unsigned long dt_off_stride;
unsigned long dt_off_count;
unsigned long dt_loop;
};
#if 0
/* If you start using the next struct, you'll have to adjust it to
* work with 64-bit firmware I think -PB
*/
struct pdc_iodc { /* PDC_IODC */
unsigned char hversion_model;
unsigned char hversion;
unsigned char spa;
unsigned char type;
unsigned int sversion_rev:4;
unsigned int sversion_model:19;
unsigned int sversion_opt:8;
unsigned char rev;
unsigned char dep;
unsigned char features;
unsigned char pad1;
unsigned int checksum:16;
unsigned int length:16;
unsigned int pad[15];
} __attribute__((aligned(8))) ;
#endif
#ifndef CONFIG_PA20
/* no BLTBs in pa2.0 processors */
struct pdc_btlb_info_range {
__u8 res00;
__u8 num_i;
__u8 num_d;
__u8 num_comb;
};
struct pdc_btlb_info { /* PDC_BLOCK_TLB, return of PDC_BTLB_INFO */
unsigned int min_size; /* minimum size of BTLB in pages */
unsigned int max_size; /* maximum size of BTLB in pages */
struct pdc_btlb_info_range fixed_range_info;
struct pdc_btlb_info_range variable_range_info;
};
#endif /* !CONFIG_PA20 */
#ifdef CONFIG_64BIT
struct pdc_memory_table_raddr { /* PDC_MEM/PDC_MEM_TABLE (return info) */
unsigned long entries_returned;
unsigned long entries_total;
};
struct pdc_memory_table { /* PDC_MEM/PDC_MEM_TABLE (arguments) */
unsigned long paddr;
unsigned int pages;
unsigned int reserved;
};
#endif /* CONFIG_64BIT */
struct pdc_system_map_mod_info { /* PDC_SYSTEM_MAP/FIND_MODULE */
unsigned long mod_addr;
unsigned long mod_pgs;
unsigned long add_addrs;
};
struct pdc_system_map_addr_info { /* PDC_SYSTEM_MAP/FIND_ADDRESS */
unsigned long mod_addr;
unsigned long mod_pgs;
};
struct pdc_initiator { /* PDC_INITIATOR */
int host_id;
int factor;
int width;
int mode;
};
struct hardware_path {
char flags; /* see bit definitions below */
char bc[6]; /* Bus Converter routing info to a specific */
/* I/O adaptor (< 0 means none, > 63 resvd) */
char mod; /* fixed field of specified module */
};
/*
* Device path specifications used by PDC.
*/
struct pdc_module_path {
struct hardware_path path;
unsigned int layers[6]; /* device-specific info (ctlr #, unit # ...) */
};
#ifndef CONFIG_PA20
/* Only used on some pre-PA2.0 boxes */
struct pdc_memory_map { /* PDC_MEMORY_MAP */
unsigned long hpa; /* mod's register set address */
unsigned long more_pgs; /* number of additional I/O pgs */
};
#endif
struct pdc_tod {
unsigned long tod_sec;
unsigned long tod_usec;
};
/* architected results from PDC_PIM/transfer hpmc on a PA1.1 machine */
struct pdc_hpmc_pim_11 { /* PDC_PIM */
__u32 gr[32];
__u32 cr[32];
__u32 sr[8];
__u32 iasq_back;
__u32 iaoq_back;
__u32 check_type;
__u32 cpu_state;
__u32 rsvd1;
__u32 cache_check;
__u32 tlb_check;
__u32 bus_check;
__u32 assists_check;
__u32 rsvd2;
__u32 assist_state;
__u32 responder_addr;
__u32 requestor_addr;
__u32 path_info;
__u64 fr[32];
};
/*
* architected results from PDC_PIM/transfer hpmc on a PA2.0 machine
*
* Note that PDC_PIM doesn't care whether or not wide mode was enabled
* so the results are different on PA1.1 vs. PA2.0 when in narrow mode.
*
* Note also that there are unarchitected results available, which
* are hversion dependent. Do a "ser pim 0 hpmc" after rebooting, since
* the firmware is probably the best way of printing hversion dependent
* data.
*/
struct pdc_hpmc_pim_20 { /* PDC_PIM */
__u64 gr[32];
__u64 cr[32];
__u64 sr[8];
__u64 iasq_back;
__u64 iaoq_back;
__u32 check_type;
__u32 cpu_state;
__u32 cache_check;
__u32 tlb_check;
__u32 bus_check;
__u32 assists_check;
__u32 assist_state;
__u32 path_info;
__u64 responder_addr;
__u64 requestor_addr;
__u64 fr[32];
};
void pdc_console_init(void); /* in pdc_console.c */
void pdc_console_restart(void);
void setup_pdc(void); /* in inventory.c */
/* wrapper-functions from pdc.c */
int pdc_add_valid(unsigned long address);
int pdc_chassis_info(struct pdc_chassis_info *chassis_info, void *led_info, unsigned long len);
int pdc_chassis_disp(unsigned long disp);
int pdc_chassis_warn(unsigned long *warn);
int pdc_coproc_cfg(struct pdc_coproc_cfg *pdc_coproc_info);
int pdc_coproc_cfg_unlocked(struct pdc_coproc_cfg *pdc_coproc_info);
int pdc_iodc_read(unsigned long *actcnt, unsigned long hpa, unsigned int index,
void *iodc_data, unsigned int iodc_data_size);
int pdc_system_map_find_mods(struct pdc_system_map_mod_info *pdc_mod_info,
struct pdc_module_path *mod_path, long mod_index);
int pdc_system_map_find_addrs(struct pdc_system_map_addr_info *pdc_addr_info,
long mod_index, long addr_index);
int pdc_model_info(struct pdc_model *model);
int pdc_model_sysmodel(char *name);
int pdc_model_cpuid(unsigned long *cpu_id);
int pdc_model_versions(unsigned long *versions, int id);
int pdc_model_capabilities(unsigned long *capabilities);
int pdc_cache_info(struct pdc_cache_info *cache);
int pdc_spaceid_bits(unsigned long *space_bits);
#ifndef CONFIG_PA20
int pdc_btlb_info(struct pdc_btlb_info *btlb);
int pdc_mem_map_hpa(struct pdc_memory_map *r_addr, struct pdc_module_path *mod_path);
#endif /* !CONFIG_PA20 */
int pdc_lan_station_id(char *lan_addr, unsigned long net_hpa);
int pdc_stable_read(unsigned long staddr, void *memaddr, unsigned long count);
int pdc_stable_write(unsigned long staddr, void *memaddr, unsigned long count);
int pdc_stable_get_size(unsigned long *size);
int pdc_stable_verify_contents(void);
int pdc_stable_initialize(void);
int pdc_pci_irt_size(unsigned long *num_entries, unsigned long hpa);
int pdc_pci_irt(unsigned long num_entries, unsigned long hpa, void *tbl);
int pdc_get_initiator(struct hardware_path *, struct pdc_initiator *);
int pdc_tod_read(struct pdc_tod *tod);
int pdc_tod_set(unsigned long sec, unsigned long usec);
#ifdef CONFIG_64BIT
int pdc_mem_mem_table(struct pdc_memory_table_raddr *r_addr,
struct pdc_memory_table *tbl, unsigned long entries);
#endif
void set_firmware_width(void);
void set_firmware_width_unlocked(void);
int pdc_do_firm_test_reset(unsigned long ftc_bitmap);
int pdc_do_reset(void);
int pdc_soft_power_info(unsigned long *power_reg);
int pdc_soft_power_button(int sw_control);
void pdc_io_reset(void);
void pdc_io_reset_devices(void);
int pdc_iodc_getc(void);
int pdc_iodc_print(const unsigned char *str, unsigned count);
void pdc_emergency_unlock(void);
int pdc_sti_call(unsigned long func, unsigned long flags,
unsigned long inptr, unsigned long outputr,
unsigned long glob_cfg);
static inline char * os_id_to_string(u16 os_id) {
switch(os_id) {
case OS_ID_NONE: return "No OS";
case OS_ID_HPUX: return "HP-UX";
case OS_ID_MPEXL: return "MPE-iX";
case OS_ID_OSF: return "OSF";
case OS_ID_HPRT: return "HP-RT";
case OS_ID_NOVEL: return "Novell Netware";
case OS_ID_LINUX: return "Linux";
default: return "Unknown";
}
}
#endif /* __KERNEL__ */
#define PAGE0 ((struct zeropage *)__PAGE_OFFSET)
/* DEFINITION OF THE ZERO-PAGE (PAG0) */
/* based on work by Jason Eckhardt (jason@equator.com) */
/* flags of the device_path */
#define PF_AUTOBOOT 0x80
#define PF_AUTOSEARCH 0x40
#define PF_TIMER 0x0F
struct device_path { /* page 1-69 */
unsigned char flags; /* flags see above! */
unsigned char bc[6]; /* bus converter routing info */
unsigned char mod;
unsigned int layers[6];/* device-specific layer-info */
} __attribute__((aligned(8))) ;
struct pz_device {
struct device_path dp; /* see above */
/* struct iomod *hpa; */
unsigned int hpa; /* HPA base address */
/* char *spa; */
unsigned int spa; /* SPA base address */
/* int (*iodc_io)(struct iomod*, ...); */
unsigned int iodc_io; /* device entry point */
short pad; /* reserved */
unsigned short cl_class;/* see below */
} __attribute__((aligned(8))) ;
struct zeropage {
/* [0x000] initialize vectors (VEC) */
unsigned int vec_special; /* must be zero */
/* int (*vec_pow_fail)(void);*/
unsigned int vec_pow_fail; /* power failure handler */
/* int (*vec_toc)(void); */
unsigned int vec_toc;
unsigned int vec_toclen;
/* int (*vec_rendz)(void); */
unsigned int vec_rendz;
int vec_pow_fail_flen;
int vec_pad[10];
/* [0x040] reserved processor dependent */
int pad0[112];
/* [0x200] reserved */
int pad1[84];
/* [0x350] memory configuration (MC) */
int memc_cont; /* contiguous mem size (bytes) */
int memc_phsize; /* physical memory size */
int memc_adsize; /* additional mem size, bytes of SPA space used by PDC */
unsigned int mem_pdc_hi; /* used for 64-bit */
/* [0x360] various parameters for the boot-CPU */
/* unsigned int *mem_booterr[8]; */
unsigned int mem_booterr[8]; /* ptr to boot errors */
unsigned int mem_free; /* first location, where OS can be loaded */
/* struct iomod *mem_hpa; */
unsigned int mem_hpa; /* HPA of the boot-CPU */
/* int (*mem_pdc)(int, ...); */
unsigned int mem_pdc; /* PDC entry point */
unsigned int mem_10msec; /* number of clock ticks in 10msec */
/* [0x390] initial memory module (IMM) */
/* struct iomod *imm_hpa; */
unsigned int imm_hpa; /* HPA of the IMM */
int imm_soft_boot; /* 0 = was hard boot, 1 = was soft boot */
unsigned int imm_spa_size; /* SPA size of the IMM in bytes */
unsigned int imm_max_mem; /* bytes of mem in IMM */
/* [0x3A0] boot console, display device and keyboard */
struct pz_device mem_cons; /* description of console device */
struct pz_device mem_boot; /* description of boot device */
struct pz_device mem_kbd; /* description of keyboard device */
/* [0x430] reserved */
int pad430[116];
/* [0x600] processor dependent */
__u32 pad600[1];
__u32 proc_sti; /* pointer to STI ROM */
__u32 pad608[126];
};
#endif /* !defined(__ASSEMBLY__) */
#endif /* _PARISC_PDC_H */
View Git Blame Copy Permalink