mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-29 07:34:06 +08:00
f403372658
Since the watermark calculations for Skylake are still broken, we're apt
to hitting underruns very easily under multi-monitor configurations.
While it would be lovely if this was fixed, it's not. Another problem
that's been coming from this however, is the mysterious issue of
underruns causing full system hangs. An easy way to reproduce this with
a skylake system:
- Get a laptop with a skylake GPU, and hook up two external monitors to
it
- Move the cursor from the built-in LCD to one of the external displays
as quickly as you can
- You'll get a few pipe underruns, and eventually the entire system will
just freeze.
After doing a lot of investigation and reading through the bspec, I
found the existence of the SAGV, which is responsible for adjusting the
system agent voltage and clock frequencies depending on how much power
we need. According to the bspec:
"The display engine access to system memory is blocked during the
adjustment time. SAGV defaults to enabled. Software must use the
GT-driver pcode mailbox to disable SAGV when the display engine is not
able to tolerate the blocking time."
The rest of the bspec goes on to explain that software can simply leave
the SAGV enabled, and disable it when we use interlaced pipes/have more
then one pipe active.
Sure enough, with this patchset the system hangs resulting from pipe
underruns on Skylake have completely vanished on my T460s. Additionally,
the bspec mentions turning off the SAGV with more then one pipe enabled
as a workaround for display underruns. While this patch doesn't entirely
fix that, it looks like it does improve the situation a little bit so
it's likely this is going to be required to make watermarks on Skylake
fully functional.
This will still need additional work in the future: we shouldn't be
enabling the SAGV if any of the currently enabled planes can't enable WM
levels that introduce latencies >= 30 µs.
Changes since v11:
- Add skl_can_enable_sagv()
- Make sure we don't enable SAGV when not all planes can enable
watermarks >= the SAGV engine block time. I was originally going to
save this for later, but I recently managed to run into a machine
that was having problems with a single pipe configuration + SAGV.
- Make comparisons to I915_SKL_SAGV_NOT_CONTROLLED explicit
- Change I915_SAGV_DYNAMIC_FREQ to I915_SAGV_ENABLE
- Move printks outside of mutexes
- Don't print error messages twice
Changes since v10:
- Apparently sandybridge_pcode_read actually writes values and reads
them back, despite it's misleading function name. This means we've
been doing this mostly wrong and have been writing garbage to the
SAGV control. Because of this, we no longer attempt to read the SAGV
status during initialization (since there are no helpers for this).
- mlankhorst noticed that this patch was breaking on some very early
pre-release Skylake machines, which apparently don't allow you to
disable the SAGV. To prevent machines from failing tests due to SAGV
errors, if the first time we try to control the SAGV results in the
mailbox indicating an invalid command, we just disable future attempts
to control the SAGV state by setting dev_priv->skl_sagv_status to
I915_SKL_SAGV_NOT_CONTROLLED and make a note of it in dmesg.
- Move mutex_unlock() a little higher in skl_enable_sagv(). This
doesn't actually fix anything, but lets us release the lock a little
sooner since we're finished with it.
Changes since v9:
- Only enable/disable sagv on Skylake
Changes since v8:
- Add intel_state->modeset guard to the conditional for
skl_enable_sagv()
Changes since v7:
- Remove GEN9_SAGV_LOW_FREQ, replace with GEN9_SAGV_IS_ENABLED (that's
all we use it for anyway)
- Use GEN9_SAGV_IS_ENABLED instead of 0x1 for clarification
- Fix a styling error that snuck past me
Changes since v6:
- Protect skl_enable_sagv() with intel_state->modeset conditional in
intel_atomic_commit_tail()
Changes since v5:
- Don't use is_power_of_2. Makes things confusing
- Don't use the old state to figure out whether or not to
enable/disable the sagv, use the new one
- Split the loop in skl_disable_sagv into it's own function
- Move skl_sagv_enable/disable() calls into intel_atomic_commit_tail()
Changes since v4:
- Use is_power_of_2 against active_crtcs to check whether we have > 1
pipe enabled
- Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0
enabled
- Call skl_sagv_enable/disable() from pre/post-plane updates
Changes since v3:
- Use time_before() to compare timeout to jiffies
Changes since v2:
- Really apply minor style nitpicks to patch this time
Changes since v1:
- Added comments about this probably being one of the requirements to
fixing Skylake's watermark issues
- Minor style nitpicks from Matt Roper
- Disable these functions on Broxton, since it doesn't have an SAGV
Signed-off-by: Lyude <cpaul@redhat.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-3-git-send-email-cpaul@redhat.com
[mlankhorst: ENOSYS -> ENXIO, whitespace fixes]
(cherry picked from commit 656d1b89e5
)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
4085 lines
124 KiB
C
4085 lines
124 KiB
C
/* i915_drv.h -- Private header for the I915 driver -*- linux-c -*-
|
|
*/
|
|
/*
|
|
*
|
|
* Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
|
|
* All Rights Reserved.
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
* copy of this software and associated documentation files (the
|
|
* "Software"), to deal in the Software without restriction, including
|
|
* without limitation the rights to use, copy, modify, merge, publish,
|
|
* distribute, sub license, and/or sell copies of the Software, and to
|
|
* permit persons to whom the Software is furnished to do so, subject to
|
|
* the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice (including the
|
|
* next paragraph) shall be included in all copies or substantial portions
|
|
* of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
|
|
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
|
|
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
|
|
* IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
|
|
* ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
|
|
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
|
|
* SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
|
|
*
|
|
*/
|
|
|
|
#ifndef _I915_DRV_H_
|
|
#define _I915_DRV_H_
|
|
|
|
#include <uapi/drm/i915_drm.h>
|
|
#include <uapi/drm/drm_fourcc.h>
|
|
|
|
#include <linux/io-mapping.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c-algo-bit.h>
|
|
#include <linux/backlight.h>
|
|
#include <linux/hashtable.h>
|
|
#include <linux/intel-iommu.h>
|
|
#include <linux/kref.h>
|
|
#include <linux/pm_qos.h>
|
|
#include <linux/shmem_fs.h>
|
|
|
|
#include <drm/drmP.h>
|
|
#include <drm/intel-gtt.h>
|
|
#include <drm/drm_legacy.h> /* for struct drm_dma_handle */
|
|
#include <drm/drm_gem.h>
|
|
#include <drm/drm_auth.h>
|
|
|
|
#include "i915_params.h"
|
|
#include "i915_reg.h"
|
|
|
|
#include "intel_bios.h"
|
|
#include "intel_dpll_mgr.h"
|
|
#include "intel_guc.h"
|
|
#include "intel_lrc.h"
|
|
#include "intel_ringbuffer.h"
|
|
|
|
#include "i915_gem.h"
|
|
#include "i915_gem_gtt.h"
|
|
#include "i915_gem_render_state.h"
|
|
|
|
#include "intel_gvt.h"
|
|
|
|
/* General customization:
|
|
*/
|
|
|
|
#define DRIVER_NAME "i915"
|
|
#define DRIVER_DESC "Intel Graphics"
|
|
#define DRIVER_DATE "20160711"
|
|
|
|
#undef WARN_ON
|
|
/* Many gcc seem to no see through this and fall over :( */
|
|
#if 0
|
|
#define WARN_ON(x) ({ \
|
|
bool __i915_warn_cond = (x); \
|
|
if (__builtin_constant_p(__i915_warn_cond)) \
|
|
BUILD_BUG_ON(__i915_warn_cond); \
|
|
WARN(__i915_warn_cond, "WARN_ON(" #x ")"); })
|
|
#else
|
|
#define WARN_ON(x) WARN((x), "%s", "WARN_ON(" __stringify(x) ")")
|
|
#endif
|
|
|
|
#undef WARN_ON_ONCE
|
|
#define WARN_ON_ONCE(x) WARN_ONCE((x), "%s", "WARN_ON_ONCE(" __stringify(x) ")")
|
|
|
|
#define MISSING_CASE(x) WARN(1, "Missing switch case (%lu) in %s\n", \
|
|
(long) (x), __func__);
|
|
|
|
/* Use I915_STATE_WARN(x) and I915_STATE_WARN_ON() (rather than WARN() and
|
|
* WARN_ON()) for hw state sanity checks to check for unexpected conditions
|
|
* which may not necessarily be a user visible problem. This will either
|
|
* WARN() or DRM_ERROR() depending on the verbose_checks moduleparam, to
|
|
* enable distros and users to tailor their preferred amount of i915 abrt
|
|
* spam.
|
|
*/
|
|
#define I915_STATE_WARN(condition, format...) ({ \
|
|
int __ret_warn_on = !!(condition); \
|
|
if (unlikely(__ret_warn_on)) \
|
|
if (!WARN(i915.verbose_state_checks, format)) \
|
|
DRM_ERROR(format); \
|
|
unlikely(__ret_warn_on); \
|
|
})
|
|
|
|
#define I915_STATE_WARN_ON(x) \
|
|
I915_STATE_WARN((x), "%s", "WARN_ON(" __stringify(x) ")")
|
|
|
|
bool __i915_inject_load_failure(const char *func, int line);
|
|
#define i915_inject_load_failure() \
|
|
__i915_inject_load_failure(__func__, __LINE__)
|
|
|
|
static inline const char *yesno(bool v)
|
|
{
|
|
return v ? "yes" : "no";
|
|
}
|
|
|
|
static inline const char *onoff(bool v)
|
|
{
|
|
return v ? "on" : "off";
|
|
}
|
|
|
|
enum pipe {
|
|
INVALID_PIPE = -1,
|
|
PIPE_A = 0,
|
|
PIPE_B,
|
|
PIPE_C,
|
|
_PIPE_EDP,
|
|
I915_MAX_PIPES = _PIPE_EDP
|
|
};
|
|
#define pipe_name(p) ((p) + 'A')
|
|
|
|
enum transcoder {
|
|
TRANSCODER_A = 0,
|
|
TRANSCODER_B,
|
|
TRANSCODER_C,
|
|
TRANSCODER_EDP,
|
|
TRANSCODER_DSI_A,
|
|
TRANSCODER_DSI_C,
|
|
I915_MAX_TRANSCODERS
|
|
};
|
|
|
|
static inline const char *transcoder_name(enum transcoder transcoder)
|
|
{
|
|
switch (transcoder) {
|
|
case TRANSCODER_A:
|
|
return "A";
|
|
case TRANSCODER_B:
|
|
return "B";
|
|
case TRANSCODER_C:
|
|
return "C";
|
|
case TRANSCODER_EDP:
|
|
return "EDP";
|
|
case TRANSCODER_DSI_A:
|
|
return "DSI A";
|
|
case TRANSCODER_DSI_C:
|
|
return "DSI C";
|
|
default:
|
|
return "<invalid>";
|
|
}
|
|
}
|
|
|
|
static inline bool transcoder_is_dsi(enum transcoder transcoder)
|
|
{
|
|
return transcoder == TRANSCODER_DSI_A || transcoder == TRANSCODER_DSI_C;
|
|
}
|
|
|
|
/*
|
|
* I915_MAX_PLANES in the enum below is the maximum (across all platforms)
|
|
* number of planes per CRTC. Not all platforms really have this many planes,
|
|
* which means some arrays of size I915_MAX_PLANES may have unused entries
|
|
* between the topmost sprite plane and the cursor plane.
|
|
*/
|
|
enum plane {
|
|
PLANE_A = 0,
|
|
PLANE_B,
|
|
PLANE_C,
|
|
PLANE_CURSOR,
|
|
I915_MAX_PLANES,
|
|
};
|
|
#define plane_name(p) ((p) + 'A')
|
|
|
|
#define sprite_name(p, s) ((p) * INTEL_INFO(dev)->num_sprites[(p)] + (s) + 'A')
|
|
|
|
enum port {
|
|
PORT_A = 0,
|
|
PORT_B,
|
|
PORT_C,
|
|
PORT_D,
|
|
PORT_E,
|
|
I915_MAX_PORTS
|
|
};
|
|
#define port_name(p) ((p) + 'A')
|
|
|
|
#define I915_NUM_PHYS_VLV 2
|
|
|
|
enum dpio_channel {
|
|
DPIO_CH0,
|
|
DPIO_CH1
|
|
};
|
|
|
|
enum dpio_phy {
|
|
DPIO_PHY0,
|
|
DPIO_PHY1
|
|
};
|
|
|
|
enum intel_display_power_domain {
|
|
POWER_DOMAIN_PIPE_A,
|
|
POWER_DOMAIN_PIPE_B,
|
|
POWER_DOMAIN_PIPE_C,
|
|
POWER_DOMAIN_PIPE_A_PANEL_FITTER,
|
|
POWER_DOMAIN_PIPE_B_PANEL_FITTER,
|
|
POWER_DOMAIN_PIPE_C_PANEL_FITTER,
|
|
POWER_DOMAIN_TRANSCODER_A,
|
|
POWER_DOMAIN_TRANSCODER_B,
|
|
POWER_DOMAIN_TRANSCODER_C,
|
|
POWER_DOMAIN_TRANSCODER_EDP,
|
|
POWER_DOMAIN_TRANSCODER_DSI_A,
|
|
POWER_DOMAIN_TRANSCODER_DSI_C,
|
|
POWER_DOMAIN_PORT_DDI_A_LANES,
|
|
POWER_DOMAIN_PORT_DDI_B_LANES,
|
|
POWER_DOMAIN_PORT_DDI_C_LANES,
|
|
POWER_DOMAIN_PORT_DDI_D_LANES,
|
|
POWER_DOMAIN_PORT_DDI_E_LANES,
|
|
POWER_DOMAIN_PORT_DSI,
|
|
POWER_DOMAIN_PORT_CRT,
|
|
POWER_DOMAIN_PORT_OTHER,
|
|
POWER_DOMAIN_VGA,
|
|
POWER_DOMAIN_AUDIO,
|
|
POWER_DOMAIN_PLLS,
|
|
POWER_DOMAIN_AUX_A,
|
|
POWER_DOMAIN_AUX_B,
|
|
POWER_DOMAIN_AUX_C,
|
|
POWER_DOMAIN_AUX_D,
|
|
POWER_DOMAIN_GMBUS,
|
|
POWER_DOMAIN_MODESET,
|
|
POWER_DOMAIN_INIT,
|
|
|
|
POWER_DOMAIN_NUM,
|
|
};
|
|
|
|
#define POWER_DOMAIN_PIPE(pipe) ((pipe) + POWER_DOMAIN_PIPE_A)
|
|
#define POWER_DOMAIN_PIPE_PANEL_FITTER(pipe) \
|
|
((pipe) + POWER_DOMAIN_PIPE_A_PANEL_FITTER)
|
|
#define POWER_DOMAIN_TRANSCODER(tran) \
|
|
((tran) == TRANSCODER_EDP ? POWER_DOMAIN_TRANSCODER_EDP : \
|
|
(tran) + POWER_DOMAIN_TRANSCODER_A)
|
|
|
|
enum hpd_pin {
|
|
HPD_NONE = 0,
|
|
HPD_TV = HPD_NONE, /* TV is known to be unreliable */
|
|
HPD_CRT,
|
|
HPD_SDVO_B,
|
|
HPD_SDVO_C,
|
|
HPD_PORT_A,
|
|
HPD_PORT_B,
|
|
HPD_PORT_C,
|
|
HPD_PORT_D,
|
|
HPD_PORT_E,
|
|
HPD_NUM_PINS
|
|
};
|
|
|
|
#define for_each_hpd_pin(__pin) \
|
|
for ((__pin) = (HPD_NONE + 1); (__pin) < HPD_NUM_PINS; (__pin)++)
|
|
|
|
struct i915_hotplug {
|
|
struct work_struct hotplug_work;
|
|
|
|
struct {
|
|
unsigned long last_jiffies;
|
|
int count;
|
|
enum {
|
|
HPD_ENABLED = 0,
|
|
HPD_DISABLED = 1,
|
|
HPD_MARK_DISABLED = 2
|
|
} state;
|
|
} stats[HPD_NUM_PINS];
|
|
u32 event_bits;
|
|
struct delayed_work reenable_work;
|
|
|
|
struct intel_digital_port *irq_port[I915_MAX_PORTS];
|
|
u32 long_port_mask;
|
|
u32 short_port_mask;
|
|
struct work_struct dig_port_work;
|
|
|
|
struct work_struct poll_init_work;
|
|
bool poll_enabled;
|
|
|
|
/*
|
|
* if we get a HPD irq from DP and a HPD irq from non-DP
|
|
* the non-DP HPD could block the workqueue on a mode config
|
|
* mutex getting, that userspace may have taken. However
|
|
* userspace is waiting on the DP workqueue to run which is
|
|
* blocked behind the non-DP one.
|
|
*/
|
|
struct workqueue_struct *dp_wq;
|
|
};
|
|
|
|
#define I915_GEM_GPU_DOMAINS \
|
|
(I915_GEM_DOMAIN_RENDER | \
|
|
I915_GEM_DOMAIN_SAMPLER | \
|
|
I915_GEM_DOMAIN_COMMAND | \
|
|
I915_GEM_DOMAIN_INSTRUCTION | \
|
|
I915_GEM_DOMAIN_VERTEX)
|
|
|
|
#define for_each_pipe(__dev_priv, __p) \
|
|
for ((__p) = 0; (__p) < INTEL_INFO(__dev_priv)->num_pipes; (__p)++)
|
|
#define for_each_pipe_masked(__dev_priv, __p, __mask) \
|
|
for ((__p) = 0; (__p) < INTEL_INFO(__dev_priv)->num_pipes; (__p)++) \
|
|
for_each_if ((__mask) & (1 << (__p)))
|
|
#define for_each_plane(__dev_priv, __pipe, __p) \
|
|
for ((__p) = 0; \
|
|
(__p) < INTEL_INFO(__dev_priv)->num_sprites[(__pipe)] + 1; \
|
|
(__p)++)
|
|
#define for_each_sprite(__dev_priv, __p, __s) \
|
|
for ((__s) = 0; \
|
|
(__s) < INTEL_INFO(__dev_priv)->num_sprites[(__p)]; \
|
|
(__s)++)
|
|
|
|
#define for_each_port_masked(__port, __ports_mask) \
|
|
for ((__port) = PORT_A; (__port) < I915_MAX_PORTS; (__port)++) \
|
|
for_each_if ((__ports_mask) & (1 << (__port)))
|
|
|
|
#define for_each_crtc(dev, crtc) \
|
|
list_for_each_entry(crtc, &(dev)->mode_config.crtc_list, head)
|
|
|
|
#define for_each_intel_plane(dev, intel_plane) \
|
|
list_for_each_entry(intel_plane, \
|
|
&(dev)->mode_config.plane_list, \
|
|
base.head)
|
|
|
|
#define for_each_intel_plane_mask(dev, intel_plane, plane_mask) \
|
|
list_for_each_entry(intel_plane, \
|
|
&(dev)->mode_config.plane_list, \
|
|
base.head) \
|
|
for_each_if ((plane_mask) & \
|
|
(1 << drm_plane_index(&intel_plane->base)))
|
|
|
|
#define for_each_intel_plane_on_crtc(dev, intel_crtc, intel_plane) \
|
|
list_for_each_entry(intel_plane, \
|
|
&(dev)->mode_config.plane_list, \
|
|
base.head) \
|
|
for_each_if ((intel_plane)->pipe == (intel_crtc)->pipe)
|
|
|
|
#define for_each_intel_crtc(dev, intel_crtc) \
|
|
list_for_each_entry(intel_crtc, \
|
|
&(dev)->mode_config.crtc_list, \
|
|
base.head)
|
|
|
|
#define for_each_intel_crtc_mask(dev, intel_crtc, crtc_mask) \
|
|
list_for_each_entry(intel_crtc, \
|
|
&(dev)->mode_config.crtc_list, \
|
|
base.head) \
|
|
for_each_if ((crtc_mask) & (1 << drm_crtc_index(&intel_crtc->base)))
|
|
|
|
#define for_each_intel_encoder(dev, intel_encoder) \
|
|
list_for_each_entry(intel_encoder, \
|
|
&(dev)->mode_config.encoder_list, \
|
|
base.head)
|
|
|
|
#define for_each_intel_connector(dev, intel_connector) \
|
|
list_for_each_entry(intel_connector, \
|
|
&(dev)->mode_config.connector_list, \
|
|
base.head)
|
|
|
|
#define for_each_encoder_on_crtc(dev, __crtc, intel_encoder) \
|
|
list_for_each_entry((intel_encoder), &(dev)->mode_config.encoder_list, base.head) \
|
|
for_each_if ((intel_encoder)->base.crtc == (__crtc))
|
|
|
|
#define for_each_connector_on_encoder(dev, __encoder, intel_connector) \
|
|
list_for_each_entry((intel_connector), &(dev)->mode_config.connector_list, base.head) \
|
|
for_each_if ((intel_connector)->base.encoder == (__encoder))
|
|
|
|
#define for_each_power_domain(domain, mask) \
|
|
for ((domain) = 0; (domain) < POWER_DOMAIN_NUM; (domain)++) \
|
|
for_each_if ((1 << (domain)) & (mask))
|
|
|
|
struct drm_i915_private;
|
|
struct i915_mm_struct;
|
|
struct i915_mmu_object;
|
|
|
|
struct drm_i915_file_private {
|
|
struct drm_i915_private *dev_priv;
|
|
struct drm_file *file;
|
|
|
|
struct {
|
|
spinlock_t lock;
|
|
struct list_head request_list;
|
|
/* 20ms is a fairly arbitrary limit (greater than the average frame time)
|
|
* chosen to prevent the CPU getting more than a frame ahead of the GPU
|
|
* (when using lax throttling for the frontbuffer). We also use it to
|
|
* offer free GPU waitboosts for severely congested workloads.
|
|
*/
|
|
#define DRM_I915_THROTTLE_JIFFIES msecs_to_jiffies(20)
|
|
} mm;
|
|
struct idr context_idr;
|
|
|
|
struct intel_rps_client {
|
|
struct list_head link;
|
|
unsigned boosts;
|
|
} rps;
|
|
|
|
unsigned int bsd_ring;
|
|
};
|
|
|
|
/* Used by dp and fdi links */
|
|
struct intel_link_m_n {
|
|
uint32_t tu;
|
|
uint32_t gmch_m;
|
|
uint32_t gmch_n;
|
|
uint32_t link_m;
|
|
uint32_t link_n;
|
|
};
|
|
|
|
void intel_link_compute_m_n(int bpp, int nlanes,
|
|
int pixel_clock, int link_clock,
|
|
struct intel_link_m_n *m_n);
|
|
|
|
/* Interface history:
|
|
*
|
|
* 1.1: Original.
|
|
* 1.2: Add Power Management
|
|
* 1.3: Add vblank support
|
|
* 1.4: Fix cmdbuffer path, add heap destroy
|
|
* 1.5: Add vblank pipe configuration
|
|
* 1.6: - New ioctl for scheduling buffer swaps on vertical blank
|
|
* - Support vertical blank on secondary display pipe
|
|
*/
|
|
#define DRIVER_MAJOR 1
|
|
#define DRIVER_MINOR 6
|
|
#define DRIVER_PATCHLEVEL 0
|
|
|
|
#define WATCH_LISTS 0
|
|
|
|
struct opregion_header;
|
|
struct opregion_acpi;
|
|
struct opregion_swsci;
|
|
struct opregion_asle;
|
|
|
|
struct intel_opregion {
|
|
struct opregion_header *header;
|
|
struct opregion_acpi *acpi;
|
|
struct opregion_swsci *swsci;
|
|
u32 swsci_gbda_sub_functions;
|
|
u32 swsci_sbcb_sub_functions;
|
|
struct opregion_asle *asle;
|
|
void *rvda;
|
|
const void *vbt;
|
|
u32 vbt_size;
|
|
u32 *lid_state;
|
|
struct work_struct asle_work;
|
|
};
|
|
#define OPREGION_SIZE (8*1024)
|
|
|
|
struct intel_overlay;
|
|
struct intel_overlay_error_state;
|
|
|
|
#define I915_FENCE_REG_NONE -1
|
|
#define I915_MAX_NUM_FENCES 32
|
|
/* 32 fences + sign bit for FENCE_REG_NONE */
|
|
#define I915_MAX_NUM_FENCE_BITS 6
|
|
|
|
struct drm_i915_fence_reg {
|
|
struct list_head lru_list;
|
|
struct drm_i915_gem_object *obj;
|
|
int pin_count;
|
|
};
|
|
|
|
struct sdvo_device_mapping {
|
|
u8 initialized;
|
|
u8 dvo_port;
|
|
u8 slave_addr;
|
|
u8 dvo_wiring;
|
|
u8 i2c_pin;
|
|
u8 ddc_pin;
|
|
};
|
|
|
|
struct intel_display_error_state;
|
|
|
|
struct drm_i915_error_state {
|
|
struct kref ref;
|
|
struct timeval time;
|
|
|
|
char error_msg[128];
|
|
bool simulated;
|
|
int iommu;
|
|
u32 reset_count;
|
|
u32 suspend_count;
|
|
|
|
/* Generic register state */
|
|
u32 eir;
|
|
u32 pgtbl_er;
|
|
u32 ier;
|
|
u32 gtier[4];
|
|
u32 ccid;
|
|
u32 derrmr;
|
|
u32 forcewake;
|
|
u32 error; /* gen6+ */
|
|
u32 err_int; /* gen7 */
|
|
u32 fault_data0; /* gen8, gen9 */
|
|
u32 fault_data1; /* gen8, gen9 */
|
|
u32 done_reg;
|
|
u32 gac_eco;
|
|
u32 gam_ecochk;
|
|
u32 gab_ctl;
|
|
u32 gfx_mode;
|
|
u32 extra_instdone[I915_NUM_INSTDONE_REG];
|
|
u64 fence[I915_MAX_NUM_FENCES];
|
|
struct intel_overlay_error_state *overlay;
|
|
struct intel_display_error_state *display;
|
|
struct drm_i915_error_object *semaphore_obj;
|
|
|
|
struct drm_i915_error_ring {
|
|
bool valid;
|
|
/* Software tracked state */
|
|
bool waiting;
|
|
int num_waiters;
|
|
int hangcheck_score;
|
|
enum intel_ring_hangcheck_action hangcheck_action;
|
|
int num_requests;
|
|
|
|
/* our own tracking of ring head and tail */
|
|
u32 cpu_ring_head;
|
|
u32 cpu_ring_tail;
|
|
|
|
u32 last_seqno;
|
|
u32 semaphore_seqno[I915_NUM_ENGINES - 1];
|
|
|
|
/* Register state */
|
|
u32 start;
|
|
u32 tail;
|
|
u32 head;
|
|
u32 ctl;
|
|
u32 hws;
|
|
u32 ipeir;
|
|
u32 ipehr;
|
|
u32 instdone;
|
|
u32 bbstate;
|
|
u32 instpm;
|
|
u32 instps;
|
|
u32 seqno;
|
|
u64 bbaddr;
|
|
u64 acthd;
|
|
u32 fault_reg;
|
|
u64 faddr;
|
|
u32 rc_psmi; /* sleep state */
|
|
u32 semaphore_mboxes[I915_NUM_ENGINES - 1];
|
|
|
|
struct drm_i915_error_object {
|
|
int page_count;
|
|
u64 gtt_offset;
|
|
u32 *pages[0];
|
|
} *ringbuffer, *batchbuffer, *wa_batchbuffer, *ctx, *hws_page;
|
|
|
|
struct drm_i915_error_object *wa_ctx;
|
|
|
|
struct drm_i915_error_request {
|
|
long jiffies;
|
|
u32 seqno;
|
|
u32 tail;
|
|
} *requests;
|
|
|
|
struct drm_i915_error_waiter {
|
|
char comm[TASK_COMM_LEN];
|
|
pid_t pid;
|
|
u32 seqno;
|
|
} *waiters;
|
|
|
|
struct {
|
|
u32 gfx_mode;
|
|
union {
|
|
u64 pdp[4];
|
|
u32 pp_dir_base;
|
|
};
|
|
} vm_info;
|
|
|
|
pid_t pid;
|
|
char comm[TASK_COMM_LEN];
|
|
} ring[I915_NUM_ENGINES];
|
|
|
|
struct drm_i915_error_buffer {
|
|
u32 size;
|
|
u32 name;
|
|
u32 rseqno[I915_NUM_ENGINES], wseqno;
|
|
u64 gtt_offset;
|
|
u32 read_domains;
|
|
u32 write_domain;
|
|
s32 fence_reg:I915_MAX_NUM_FENCE_BITS;
|
|
s32 pinned:2;
|
|
u32 tiling:2;
|
|
u32 dirty:1;
|
|
u32 purgeable:1;
|
|
u32 userptr:1;
|
|
s32 ring:4;
|
|
u32 cache_level:3;
|
|
} **active_bo, **pinned_bo;
|
|
|
|
u32 *active_bo_count, *pinned_bo_count;
|
|
u32 vm_count;
|
|
};
|
|
|
|
struct intel_connector;
|
|
struct intel_encoder;
|
|
struct intel_crtc_state;
|
|
struct intel_initial_plane_config;
|
|
struct intel_crtc;
|
|
struct intel_limit;
|
|
struct dpll;
|
|
|
|
struct drm_i915_display_funcs {
|
|
int (*get_display_clock_speed)(struct drm_device *dev);
|
|
int (*get_fifo_size)(struct drm_device *dev, int plane);
|
|
int (*compute_pipe_wm)(struct intel_crtc_state *cstate);
|
|
int (*compute_intermediate_wm)(struct drm_device *dev,
|
|
struct intel_crtc *intel_crtc,
|
|
struct intel_crtc_state *newstate);
|
|
void (*initial_watermarks)(struct intel_crtc_state *cstate);
|
|
void (*optimize_watermarks)(struct intel_crtc_state *cstate);
|
|
int (*compute_global_watermarks)(struct drm_atomic_state *state);
|
|
void (*update_wm)(struct drm_crtc *crtc);
|
|
int (*modeset_calc_cdclk)(struct drm_atomic_state *state);
|
|
void (*modeset_commit_cdclk)(struct drm_atomic_state *state);
|
|
/* Returns the active state of the crtc, and if the crtc is active,
|
|
* fills out the pipe-config with the hw state. */
|
|
bool (*get_pipe_config)(struct intel_crtc *,
|
|
struct intel_crtc_state *);
|
|
void (*get_initial_plane_config)(struct intel_crtc *,
|
|
struct intel_initial_plane_config *);
|
|
int (*crtc_compute_clock)(struct intel_crtc *crtc,
|
|
struct intel_crtc_state *crtc_state);
|
|
void (*crtc_enable)(struct drm_crtc *crtc);
|
|
void (*crtc_disable)(struct drm_crtc *crtc);
|
|
void (*audio_codec_enable)(struct drm_connector *connector,
|
|
struct intel_encoder *encoder,
|
|
const struct drm_display_mode *adjusted_mode);
|
|
void (*audio_codec_disable)(struct intel_encoder *encoder);
|
|
void (*fdi_link_train)(struct drm_crtc *crtc);
|
|
void (*init_clock_gating)(struct drm_device *dev);
|
|
int (*queue_flip)(struct drm_device *dev, struct drm_crtc *crtc,
|
|
struct drm_framebuffer *fb,
|
|
struct drm_i915_gem_object *obj,
|
|
struct drm_i915_gem_request *req,
|
|
uint32_t flags);
|
|
void (*hpd_irq_setup)(struct drm_i915_private *dev_priv);
|
|
/* clock updates for mode set */
|
|
/* cursor updates */
|
|
/* render clock increase/decrease */
|
|
/* display clock increase/decrease */
|
|
/* pll clock increase/decrease */
|
|
|
|
void (*load_csc_matrix)(struct drm_crtc_state *crtc_state);
|
|
void (*load_luts)(struct drm_crtc_state *crtc_state);
|
|
};
|
|
|
|
enum forcewake_domain_id {
|
|
FW_DOMAIN_ID_RENDER = 0,
|
|
FW_DOMAIN_ID_BLITTER,
|
|
FW_DOMAIN_ID_MEDIA,
|
|
|
|
FW_DOMAIN_ID_COUNT
|
|
};
|
|
|
|
enum forcewake_domains {
|
|
FORCEWAKE_RENDER = (1 << FW_DOMAIN_ID_RENDER),
|
|
FORCEWAKE_BLITTER = (1 << FW_DOMAIN_ID_BLITTER),
|
|
FORCEWAKE_MEDIA = (1 << FW_DOMAIN_ID_MEDIA),
|
|
FORCEWAKE_ALL = (FORCEWAKE_RENDER |
|
|
FORCEWAKE_BLITTER |
|
|
FORCEWAKE_MEDIA)
|
|
};
|
|
|
|
#define FW_REG_READ (1)
|
|
#define FW_REG_WRITE (2)
|
|
|
|
enum forcewake_domains
|
|
intel_uncore_forcewake_for_reg(struct drm_i915_private *dev_priv,
|
|
i915_reg_t reg, unsigned int op);
|
|
|
|
struct intel_uncore_funcs {
|
|
void (*force_wake_get)(struct drm_i915_private *dev_priv,
|
|
enum forcewake_domains domains);
|
|
void (*force_wake_put)(struct drm_i915_private *dev_priv,
|
|
enum forcewake_domains domains);
|
|
|
|
uint8_t (*mmio_readb)(struct drm_i915_private *dev_priv, i915_reg_t r, bool trace);
|
|
uint16_t (*mmio_readw)(struct drm_i915_private *dev_priv, i915_reg_t r, bool trace);
|
|
uint32_t (*mmio_readl)(struct drm_i915_private *dev_priv, i915_reg_t r, bool trace);
|
|
uint64_t (*mmio_readq)(struct drm_i915_private *dev_priv, i915_reg_t r, bool trace);
|
|
|
|
void (*mmio_writeb)(struct drm_i915_private *dev_priv, i915_reg_t r,
|
|
uint8_t val, bool trace);
|
|
void (*mmio_writew)(struct drm_i915_private *dev_priv, i915_reg_t r,
|
|
uint16_t val, bool trace);
|
|
void (*mmio_writel)(struct drm_i915_private *dev_priv, i915_reg_t r,
|
|
uint32_t val, bool trace);
|
|
void (*mmio_writeq)(struct drm_i915_private *dev_priv, i915_reg_t r,
|
|
uint64_t val, bool trace);
|
|
};
|
|
|
|
struct intel_uncore {
|
|
spinlock_t lock; /** lock is also taken in irq contexts. */
|
|
|
|
struct intel_uncore_funcs funcs;
|
|
|
|
unsigned fifo_count;
|
|
enum forcewake_domains fw_domains;
|
|
|
|
struct intel_uncore_forcewake_domain {
|
|
struct drm_i915_private *i915;
|
|
enum forcewake_domain_id id;
|
|
enum forcewake_domains mask;
|
|
unsigned wake_count;
|
|
struct hrtimer timer;
|
|
i915_reg_t reg_set;
|
|
u32 val_set;
|
|
u32 val_clear;
|
|
i915_reg_t reg_ack;
|
|
i915_reg_t reg_post;
|
|
u32 val_reset;
|
|
} fw_domain[FW_DOMAIN_ID_COUNT];
|
|
|
|
int unclaimed_mmio_check;
|
|
};
|
|
|
|
/* Iterate over initialised fw domains */
|
|
#define for_each_fw_domain_masked(domain__, mask__, dev_priv__) \
|
|
for ((domain__) = &(dev_priv__)->uncore.fw_domain[0]; \
|
|
(domain__) < &(dev_priv__)->uncore.fw_domain[FW_DOMAIN_ID_COUNT]; \
|
|
(domain__)++) \
|
|
for_each_if ((mask__) & (domain__)->mask)
|
|
|
|
#define for_each_fw_domain(domain__, dev_priv__) \
|
|
for_each_fw_domain_masked(domain__, FORCEWAKE_ALL, dev_priv__)
|
|
|
|
#define CSR_VERSION(major, minor) ((major) << 16 | (minor))
|
|
#define CSR_VERSION_MAJOR(version) ((version) >> 16)
|
|
#define CSR_VERSION_MINOR(version) ((version) & 0xffff)
|
|
|
|
struct intel_csr {
|
|
struct work_struct work;
|
|
const char *fw_path;
|
|
uint32_t *dmc_payload;
|
|
uint32_t dmc_fw_size;
|
|
uint32_t version;
|
|
uint32_t mmio_count;
|
|
i915_reg_t mmioaddr[8];
|
|
uint32_t mmiodata[8];
|
|
uint32_t dc_state;
|
|
uint32_t allowed_dc_mask;
|
|
};
|
|
|
|
#define DEV_INFO_FOR_EACH_FLAG(func, sep) \
|
|
func(is_mobile) sep \
|
|
func(is_i85x) sep \
|
|
func(is_i915g) sep \
|
|
func(is_i945gm) sep \
|
|
func(is_g33) sep \
|
|
func(need_gfx_hws) sep \
|
|
func(is_g4x) sep \
|
|
func(is_pineview) sep \
|
|
func(is_broadwater) sep \
|
|
func(is_crestline) sep \
|
|
func(is_ivybridge) sep \
|
|
func(is_valleyview) sep \
|
|
func(is_cherryview) sep \
|
|
func(is_haswell) sep \
|
|
func(is_broadwell) sep \
|
|
func(is_skylake) sep \
|
|
func(is_broxton) sep \
|
|
func(is_kabylake) sep \
|
|
func(is_preliminary) sep \
|
|
func(has_fbc) sep \
|
|
func(has_pipe_cxsr) sep \
|
|
func(has_hotplug) sep \
|
|
func(cursor_needs_physical) sep \
|
|
func(has_overlay) sep \
|
|
func(overlay_needs_physical) sep \
|
|
func(supports_tv) sep \
|
|
func(has_llc) sep \
|
|
func(has_snoop) sep \
|
|
func(has_ddi) sep \
|
|
func(has_fpga_dbg) sep \
|
|
func(has_pooled_eu)
|
|
|
|
#define DEFINE_FLAG(name) u8 name:1
|
|
#define SEP_SEMICOLON ;
|
|
|
|
struct intel_device_info {
|
|
u32 display_mmio_offset;
|
|
u16 device_id;
|
|
u8 num_pipes;
|
|
u8 num_sprites[I915_MAX_PIPES];
|
|
u8 gen;
|
|
u16 gen_mask;
|
|
u8 ring_mask; /* Rings supported by the HW */
|
|
DEV_INFO_FOR_EACH_FLAG(DEFINE_FLAG, SEP_SEMICOLON);
|
|
/* Register offsets for the various display pipes and transcoders */
|
|
int pipe_offsets[I915_MAX_TRANSCODERS];
|
|
int trans_offsets[I915_MAX_TRANSCODERS];
|
|
int palette_offsets[I915_MAX_PIPES];
|
|
int cursor_offsets[I915_MAX_PIPES];
|
|
|
|
/* Slice/subslice/EU info */
|
|
u8 slice_total;
|
|
u8 subslice_total;
|
|
u8 subslice_per_slice;
|
|
u8 eu_total;
|
|
u8 eu_per_subslice;
|
|
u8 min_eu_in_pool;
|
|
/* For each slice, which subslice(s) has(have) 7 EUs (bitfield)? */
|
|
u8 subslice_7eu[3];
|
|
u8 has_slice_pg:1;
|
|
u8 has_subslice_pg:1;
|
|
u8 has_eu_pg:1;
|
|
|
|
struct color_luts {
|
|
u16 degamma_lut_size;
|
|
u16 gamma_lut_size;
|
|
} color;
|
|
};
|
|
|
|
#undef DEFINE_FLAG
|
|
#undef SEP_SEMICOLON
|
|
|
|
enum i915_cache_level {
|
|
I915_CACHE_NONE = 0,
|
|
I915_CACHE_LLC, /* also used for snoopable memory on non-LLC */
|
|
I915_CACHE_L3_LLC, /* gen7+, L3 sits between the domain specifc
|
|
caches, eg sampler/render caches, and the
|
|
large Last-Level-Cache. LLC is coherent with
|
|
the CPU, but L3 is only visible to the GPU. */
|
|
I915_CACHE_WT, /* hsw:gt3e WriteThrough for scanouts */
|
|
};
|
|
|
|
struct i915_ctx_hang_stats {
|
|
/* This context had batch pending when hang was declared */
|
|
unsigned batch_pending;
|
|
|
|
/* This context had batch active when hang was declared */
|
|
unsigned batch_active;
|
|
|
|
/* Time when this context was last blamed for a GPU reset */
|
|
unsigned long guilty_ts;
|
|
|
|
/* If the contexts causes a second GPU hang within this time,
|
|
* it is permanently banned from submitting any more work.
|
|
*/
|
|
unsigned long ban_period_seconds;
|
|
|
|
/* This context is banned to submit more work */
|
|
bool banned;
|
|
};
|
|
|
|
/* This must match up with the value previously used for execbuf2.rsvd1. */
|
|
#define DEFAULT_CONTEXT_HANDLE 0
|
|
|
|
/**
|
|
* struct i915_gem_context - as the name implies, represents a context.
|
|
* @ref: reference count.
|
|
* @user_handle: userspace tracking identity for this context.
|
|
* @remap_slice: l3 row remapping information.
|
|
* @flags: context specific flags:
|
|
* CONTEXT_NO_ZEROMAP: do not allow mapping things to page 0.
|
|
* @file_priv: filp associated with this context (NULL for global default
|
|
* context).
|
|
* @hang_stats: information about the role of this context in possible GPU
|
|
* hangs.
|
|
* @ppgtt: virtual memory space used by this context.
|
|
* @legacy_hw_ctx: render context backing object and whether it is correctly
|
|
* initialized (legacy ring submission mechanism only).
|
|
* @link: link in the global list of contexts.
|
|
*
|
|
* Contexts are memory images used by the hardware to store copies of their
|
|
* internal state.
|
|
*/
|
|
struct i915_gem_context {
|
|
struct kref ref;
|
|
struct drm_i915_private *i915;
|
|
struct drm_i915_file_private *file_priv;
|
|
struct i915_hw_ppgtt *ppgtt;
|
|
|
|
struct i915_ctx_hang_stats hang_stats;
|
|
|
|
unsigned long flags;
|
|
#define CONTEXT_NO_ZEROMAP BIT(0)
|
|
#define CONTEXT_NO_ERROR_CAPTURE BIT(1)
|
|
|
|
/* Unique identifier for this context, used by the hw for tracking */
|
|
unsigned int hw_id;
|
|
u32 user_handle;
|
|
|
|
u32 ggtt_alignment;
|
|
|
|
struct intel_context {
|
|
struct drm_i915_gem_object *state;
|
|
struct intel_ringbuffer *ringbuf;
|
|
struct i915_vma *lrc_vma;
|
|
uint32_t *lrc_reg_state;
|
|
u64 lrc_desc;
|
|
int pin_count;
|
|
bool initialised;
|
|
} engine[I915_NUM_ENGINES];
|
|
u32 ring_size;
|
|
u32 desc_template;
|
|
struct atomic_notifier_head status_notifier;
|
|
bool execlists_force_single_submission;
|
|
|
|
struct list_head link;
|
|
|
|
u8 remap_slice;
|
|
};
|
|
|
|
enum fb_op_origin {
|
|
ORIGIN_GTT,
|
|
ORIGIN_CPU,
|
|
ORIGIN_CS,
|
|
ORIGIN_FLIP,
|
|
ORIGIN_DIRTYFB,
|
|
};
|
|
|
|
struct intel_fbc {
|
|
/* This is always the inner lock when overlapping with struct_mutex and
|
|
* it's the outer lock when overlapping with stolen_lock. */
|
|
struct mutex lock;
|
|
unsigned threshold;
|
|
unsigned int possible_framebuffer_bits;
|
|
unsigned int busy_bits;
|
|
unsigned int visible_pipes_mask;
|
|
struct intel_crtc *crtc;
|
|
|
|
struct drm_mm_node compressed_fb;
|
|
struct drm_mm_node *compressed_llb;
|
|
|
|
bool false_color;
|
|
|
|
bool enabled;
|
|
bool active;
|
|
|
|
struct intel_fbc_state_cache {
|
|
struct {
|
|
unsigned int mode_flags;
|
|
uint32_t hsw_bdw_pixel_rate;
|
|
} crtc;
|
|
|
|
struct {
|
|
unsigned int rotation;
|
|
int src_w;
|
|
int src_h;
|
|
bool visible;
|
|
} plane;
|
|
|
|
struct {
|
|
u64 ilk_ggtt_offset;
|
|
uint32_t pixel_format;
|
|
unsigned int stride;
|
|
int fence_reg;
|
|
unsigned int tiling_mode;
|
|
} fb;
|
|
} state_cache;
|
|
|
|
struct intel_fbc_reg_params {
|
|
struct {
|
|
enum pipe pipe;
|
|
enum plane plane;
|
|
unsigned int fence_y_offset;
|
|
} crtc;
|
|
|
|
struct {
|
|
u64 ggtt_offset;
|
|
uint32_t pixel_format;
|
|
unsigned int stride;
|
|
int fence_reg;
|
|
} fb;
|
|
|
|
int cfb_size;
|
|
} params;
|
|
|
|
struct intel_fbc_work {
|
|
bool scheduled;
|
|
u32 scheduled_vblank;
|
|
struct work_struct work;
|
|
} work;
|
|
|
|
const char *no_fbc_reason;
|
|
};
|
|
|
|
/**
|
|
* HIGH_RR is the highest eDP panel refresh rate read from EDID
|
|
* LOW_RR is the lowest eDP panel refresh rate found from EDID
|
|
* parsing for same resolution.
|
|
*/
|
|
enum drrs_refresh_rate_type {
|
|
DRRS_HIGH_RR,
|
|
DRRS_LOW_RR,
|
|
DRRS_MAX_RR, /* RR count */
|
|
};
|
|
|
|
enum drrs_support_type {
|
|
DRRS_NOT_SUPPORTED = 0,
|
|
STATIC_DRRS_SUPPORT = 1,
|
|
SEAMLESS_DRRS_SUPPORT = 2
|
|
};
|
|
|
|
struct intel_dp;
|
|
struct i915_drrs {
|
|
struct mutex mutex;
|
|
struct delayed_work work;
|
|
struct intel_dp *dp;
|
|
unsigned busy_frontbuffer_bits;
|
|
enum drrs_refresh_rate_type refresh_rate_type;
|
|
enum drrs_support_type type;
|
|
};
|
|
|
|
struct i915_psr {
|
|
struct mutex lock;
|
|
bool sink_support;
|
|
bool source_ok;
|
|
struct intel_dp *enabled;
|
|
bool active;
|
|
struct delayed_work work;
|
|
unsigned busy_frontbuffer_bits;
|
|
bool psr2_support;
|
|
bool aux_frame_sync;
|
|
bool link_standby;
|
|
};
|
|
|
|
enum intel_pch {
|
|
PCH_NONE = 0, /* No PCH present */
|
|
PCH_IBX, /* Ibexpeak PCH */
|
|
PCH_CPT, /* Cougarpoint PCH */
|
|
PCH_LPT, /* Lynxpoint PCH */
|
|
PCH_SPT, /* Sunrisepoint PCH */
|
|
PCH_KBP, /* Kabypoint PCH */
|
|
PCH_NOP,
|
|
};
|
|
|
|
enum intel_sbi_destination {
|
|
SBI_ICLK,
|
|
SBI_MPHY,
|
|
};
|
|
|
|
#define QUIRK_PIPEA_FORCE (1<<0)
|
|
#define QUIRK_LVDS_SSC_DISABLE (1<<1)
|
|
#define QUIRK_INVERT_BRIGHTNESS (1<<2)
|
|
#define QUIRK_BACKLIGHT_PRESENT (1<<3)
|
|
#define QUIRK_PIPEB_FORCE (1<<4)
|
|
#define QUIRK_PIN_SWIZZLED_PAGES (1<<5)
|
|
|
|
struct intel_fbdev;
|
|
struct intel_fbc_work;
|
|
|
|
struct intel_gmbus {
|
|
struct i2c_adapter adapter;
|
|
#define GMBUS_FORCE_BIT_RETRY (1U << 31)
|
|
u32 force_bit;
|
|
u32 reg0;
|
|
i915_reg_t gpio_reg;
|
|
struct i2c_algo_bit_data bit_algo;
|
|
struct drm_i915_private *dev_priv;
|
|
};
|
|
|
|
struct i915_suspend_saved_registers {
|
|
u32 saveDSPARB;
|
|
u32 saveLVDS;
|
|
u32 savePP_ON_DELAYS;
|
|
u32 savePP_OFF_DELAYS;
|
|
u32 savePP_ON;
|
|
u32 savePP_OFF;
|
|
u32 savePP_CONTROL;
|
|
u32 savePP_DIVISOR;
|
|
u32 saveFBC_CONTROL;
|
|
u32 saveCACHE_MODE_0;
|
|
u32 saveMI_ARB_STATE;
|
|
u32 saveSWF0[16];
|
|
u32 saveSWF1[16];
|
|
u32 saveSWF3[3];
|
|
uint64_t saveFENCE[I915_MAX_NUM_FENCES];
|
|
u32 savePCH_PORT_HOTPLUG;
|
|
u16 saveGCDGMBUS;
|
|
};
|
|
|
|
struct vlv_s0ix_state {
|
|
/* GAM */
|
|
u32 wr_watermark;
|
|
u32 gfx_prio_ctrl;
|
|
u32 arb_mode;
|
|
u32 gfx_pend_tlb0;
|
|
u32 gfx_pend_tlb1;
|
|
u32 lra_limits[GEN7_LRA_LIMITS_REG_NUM];
|
|
u32 media_max_req_count;
|
|
u32 gfx_max_req_count;
|
|
u32 render_hwsp;
|
|
u32 ecochk;
|
|
u32 bsd_hwsp;
|
|
u32 blt_hwsp;
|
|
u32 tlb_rd_addr;
|
|
|
|
/* MBC */
|
|
u32 g3dctl;
|
|
u32 gsckgctl;
|
|
u32 mbctl;
|
|
|
|
/* GCP */
|
|
u32 ucgctl1;
|
|
u32 ucgctl3;
|
|
u32 rcgctl1;
|
|
u32 rcgctl2;
|
|
u32 rstctl;
|
|
u32 misccpctl;
|
|
|
|
/* GPM */
|
|
u32 gfxpause;
|
|
u32 rpdeuhwtc;
|
|
u32 rpdeuc;
|
|
u32 ecobus;
|
|
u32 pwrdwnupctl;
|
|
u32 rp_down_timeout;
|
|
u32 rp_deucsw;
|
|
u32 rcubmabdtmr;
|
|
u32 rcedata;
|
|
u32 spare2gh;
|
|
|
|
/* Display 1 CZ domain */
|
|
u32 gt_imr;
|
|
u32 gt_ier;
|
|
u32 pm_imr;
|
|
u32 pm_ier;
|
|
u32 gt_scratch[GEN7_GT_SCRATCH_REG_NUM];
|
|
|
|
/* GT SA CZ domain */
|
|
u32 tilectl;
|
|
u32 gt_fifoctl;
|
|
u32 gtlc_wake_ctrl;
|
|
u32 gtlc_survive;
|
|
u32 pmwgicz;
|
|
|
|
/* Display 2 CZ domain */
|
|
u32 gu_ctl0;
|
|
u32 gu_ctl1;
|
|
u32 pcbr;
|
|
u32 clock_gate_dis2;
|
|
};
|
|
|
|
struct intel_rps_ei {
|
|
u32 cz_clock;
|
|
u32 render_c0;
|
|
u32 media_c0;
|
|
};
|
|
|
|
struct intel_gen6_power_mgmt {
|
|
/*
|
|
* work, interrupts_enabled and pm_iir are protected by
|
|
* dev_priv->irq_lock
|
|
*/
|
|
struct work_struct work;
|
|
bool interrupts_enabled;
|
|
u32 pm_iir;
|
|
|
|
u32 pm_intr_keep;
|
|
|
|
/* Frequencies are stored in potentially platform dependent multiples.
|
|
* In other words, *_freq needs to be multiplied by X to be interesting.
|
|
* Soft limits are those which are used for the dynamic reclocking done
|
|
* by the driver (raise frequencies under heavy loads, and lower for
|
|
* lighter loads). Hard limits are those imposed by the hardware.
|
|
*
|
|
* A distinction is made for overclocking, which is never enabled by
|
|
* default, and is considered to be above the hard limit if it's
|
|
* possible at all.
|
|
*/
|
|
u8 cur_freq; /* Current frequency (cached, may not == HW) */
|
|
u8 min_freq_softlimit; /* Minimum frequency permitted by the driver */
|
|
u8 max_freq_softlimit; /* Max frequency permitted by the driver */
|
|
u8 max_freq; /* Maximum frequency, RP0 if not overclocking */
|
|
u8 min_freq; /* AKA RPn. Minimum frequency */
|
|
u8 idle_freq; /* Frequency to request when we are idle */
|
|
u8 efficient_freq; /* AKA RPe. Pre-determined balanced frequency */
|
|
u8 rp1_freq; /* "less than" RP0 power/freqency */
|
|
u8 rp0_freq; /* Non-overclocked max frequency. */
|
|
u16 gpll_ref_freq; /* vlv/chv GPLL reference frequency */
|
|
|
|
u8 up_threshold; /* Current %busy required to uplock */
|
|
u8 down_threshold; /* Current %busy required to downclock */
|
|
|
|
int last_adj;
|
|
enum { LOW_POWER, BETWEEN, HIGH_POWER } power;
|
|
|
|
spinlock_t client_lock;
|
|
struct list_head clients;
|
|
bool client_boost;
|
|
|
|
bool enabled;
|
|
struct delayed_work delayed_resume_work;
|
|
unsigned boosts;
|
|
|
|
struct intel_rps_client semaphores, mmioflips;
|
|
|
|
/* manual wa residency calculations */
|
|
struct intel_rps_ei up_ei, down_ei;
|
|
|
|
/*
|
|
* Protects RPS/RC6 register access and PCU communication.
|
|
* Must be taken after struct_mutex if nested. Note that
|
|
* this lock may be held for long periods of time when
|
|
* talking to hw - so only take it when talking to hw!
|
|
*/
|
|
struct mutex hw_lock;
|
|
};
|
|
|
|
/* defined intel_pm.c */
|
|
extern spinlock_t mchdev_lock;
|
|
|
|
struct intel_ilk_power_mgmt {
|
|
u8 cur_delay;
|
|
u8 min_delay;
|
|
u8 max_delay;
|
|
u8 fmax;
|
|
u8 fstart;
|
|
|
|
u64 last_count1;
|
|
unsigned long last_time1;
|
|
unsigned long chipset_power;
|
|
u64 last_count2;
|
|
u64 last_time2;
|
|
unsigned long gfx_power;
|
|
u8 corr;
|
|
|
|
int c_m;
|
|
int r_t;
|
|
};
|
|
|
|
struct drm_i915_private;
|
|
struct i915_power_well;
|
|
|
|
struct i915_power_well_ops {
|
|
/*
|
|
* Synchronize the well's hw state to match the current sw state, for
|
|
* example enable/disable it based on the current refcount. Called
|
|
* during driver init and resume time, possibly after first calling
|
|
* the enable/disable handlers.
|
|
*/
|
|
void (*sync_hw)(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well);
|
|
/*
|
|
* Enable the well and resources that depend on it (for example
|
|
* interrupts located on the well). Called after the 0->1 refcount
|
|
* transition.
|
|
*/
|
|
void (*enable)(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well);
|
|
/*
|
|
* Disable the well and resources that depend on it. Called after
|
|
* the 1->0 refcount transition.
|
|
*/
|
|
void (*disable)(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well);
|
|
/* Returns the hw enabled state. */
|
|
bool (*is_enabled)(struct drm_i915_private *dev_priv,
|
|
struct i915_power_well *power_well);
|
|
};
|
|
|
|
/* Power well structure for haswell */
|
|
struct i915_power_well {
|
|
const char *name;
|
|
bool always_on;
|
|
/* power well enable/disable usage count */
|
|
int count;
|
|
/* cached hw enabled state */
|
|
bool hw_enabled;
|
|
unsigned long domains;
|
|
unsigned long data;
|
|
const struct i915_power_well_ops *ops;
|
|
};
|
|
|
|
struct i915_power_domains {
|
|
/*
|
|
* Power wells needed for initialization at driver init and suspend
|
|
* time are on. They are kept on until after the first modeset.
|
|
*/
|
|
bool init_power_on;
|
|
bool initializing;
|
|
int power_well_count;
|
|
|
|
struct mutex lock;
|
|
int domain_use_count[POWER_DOMAIN_NUM];
|
|
struct i915_power_well *power_wells;
|
|
};
|
|
|
|
#define MAX_L3_SLICES 2
|
|
struct intel_l3_parity {
|
|
u32 *remap_info[MAX_L3_SLICES];
|
|
struct work_struct error_work;
|
|
int which_slice;
|
|
};
|
|
|
|
struct i915_gem_mm {
|
|
/** Memory allocator for GTT stolen memory */
|
|
struct drm_mm stolen;
|
|
/** Protects the usage of the GTT stolen memory allocator. This is
|
|
* always the inner lock when overlapping with struct_mutex. */
|
|
struct mutex stolen_lock;
|
|
|
|
/** List of all objects in gtt_space. Used to restore gtt
|
|
* mappings on resume */
|
|
struct list_head bound_list;
|
|
/**
|
|
* List of objects which are not bound to the GTT (thus
|
|
* are idle and not used by the GPU) but still have
|
|
* (presumably uncached) pages still attached.
|
|
*/
|
|
struct list_head unbound_list;
|
|
|
|
/** Usable portion of the GTT for GEM */
|
|
unsigned long stolen_base; /* limited to low memory (32-bit) */
|
|
|
|
/** PPGTT used for aliasing the PPGTT with the GTT */
|
|
struct i915_hw_ppgtt *aliasing_ppgtt;
|
|
|
|
struct notifier_block oom_notifier;
|
|
struct notifier_block vmap_notifier;
|
|
struct shrinker shrinker;
|
|
bool shrinker_no_lock_stealing;
|
|
|
|
/** LRU list of objects with fence regs on them. */
|
|
struct list_head fence_list;
|
|
|
|
/**
|
|
* Are we in a non-interruptible section of code like
|
|
* modesetting?
|
|
*/
|
|
bool interruptible;
|
|
|
|
/* the indicator for dispatch video commands on two BSD rings */
|
|
unsigned int bsd_ring_dispatch_index;
|
|
|
|
/** Bit 6 swizzling required for X tiling */
|
|
uint32_t bit_6_swizzle_x;
|
|
/** Bit 6 swizzling required for Y tiling */
|
|
uint32_t bit_6_swizzle_y;
|
|
|
|
/* accounting, useful for userland debugging */
|
|
spinlock_t object_stat_lock;
|
|
size_t object_memory;
|
|
u32 object_count;
|
|
};
|
|
|
|
struct drm_i915_error_state_buf {
|
|
struct drm_i915_private *i915;
|
|
unsigned bytes;
|
|
unsigned size;
|
|
int err;
|
|
u8 *buf;
|
|
loff_t start;
|
|
loff_t pos;
|
|
};
|
|
|
|
struct i915_error_state_file_priv {
|
|
struct drm_device *dev;
|
|
struct drm_i915_error_state *error;
|
|
};
|
|
|
|
struct i915_gpu_error {
|
|
/* For hangcheck timer */
|
|
#define DRM_I915_HANGCHECK_PERIOD 1500 /* in ms */
|
|
#define DRM_I915_HANGCHECK_JIFFIES msecs_to_jiffies(DRM_I915_HANGCHECK_PERIOD)
|
|
/* Hang gpu twice in this window and your context gets banned */
|
|
#define DRM_I915_CTX_BAN_PERIOD DIV_ROUND_UP(8*DRM_I915_HANGCHECK_PERIOD, 1000)
|
|
|
|
struct delayed_work hangcheck_work;
|
|
|
|
/* For reset and error_state handling. */
|
|
spinlock_t lock;
|
|
/* Protected by the above dev->gpu_error.lock. */
|
|
struct drm_i915_error_state *first_error;
|
|
|
|
unsigned long missed_irq_rings;
|
|
|
|
/**
|
|
* State variable controlling the reset flow and count
|
|
*
|
|
* This is a counter which gets incremented when reset is triggered,
|
|
* and again when reset has been handled. So odd values (lowest bit set)
|
|
* means that reset is in progress and even values that
|
|
* (reset_counter >> 1):th reset was successfully completed.
|
|
*
|
|
* If reset is not completed succesfully, the I915_WEDGE bit is
|
|
* set meaning that hardware is terminally sour and there is no
|
|
* recovery. All waiters on the reset_queue will be woken when
|
|
* that happens.
|
|
*
|
|
* This counter is used by the wait_seqno code to notice that reset
|
|
* event happened and it needs to restart the entire ioctl (since most
|
|
* likely the seqno it waited for won't ever signal anytime soon).
|
|
*
|
|
* This is important for lock-free wait paths, where no contended lock
|
|
* naturally enforces the correct ordering between the bail-out of the
|
|
* waiter and the gpu reset work code.
|
|
*/
|
|
atomic_t reset_counter;
|
|
|
|
#define I915_RESET_IN_PROGRESS_FLAG 1
|
|
#define I915_WEDGED (1 << 31)
|
|
|
|
/**
|
|
* Waitqueue to signal when a hang is detected. Used to for waiters
|
|
* to release the struct_mutex for the reset to procede.
|
|
*/
|
|
wait_queue_head_t wait_queue;
|
|
|
|
/**
|
|
* Waitqueue to signal when the reset has completed. Used by clients
|
|
* that wait for dev_priv->mm.wedged to settle.
|
|
*/
|
|
wait_queue_head_t reset_queue;
|
|
|
|
/* For missed irq/seqno simulation. */
|
|
unsigned long test_irq_rings;
|
|
};
|
|
|
|
enum modeset_restore {
|
|
MODESET_ON_LID_OPEN,
|
|
MODESET_DONE,
|
|
MODESET_SUSPENDED,
|
|
};
|
|
|
|
#define DP_AUX_A 0x40
|
|
#define DP_AUX_B 0x10
|
|
#define DP_AUX_C 0x20
|
|
#define DP_AUX_D 0x30
|
|
|
|
#define DDC_PIN_B 0x05
|
|
#define DDC_PIN_C 0x04
|
|
#define DDC_PIN_D 0x06
|
|
|
|
struct ddi_vbt_port_info {
|
|
/*
|
|
* This is an index in the HDMI/DVI DDI buffer translation table.
|
|
* The special value HDMI_LEVEL_SHIFT_UNKNOWN means the VBT didn't
|
|
* populate this field.
|
|
*/
|
|
#define HDMI_LEVEL_SHIFT_UNKNOWN 0xff
|
|
uint8_t hdmi_level_shift;
|
|
|
|
uint8_t supports_dvi:1;
|
|
uint8_t supports_hdmi:1;
|
|
uint8_t supports_dp:1;
|
|
|
|
uint8_t alternate_aux_channel;
|
|
uint8_t alternate_ddc_pin;
|
|
|
|
uint8_t dp_boost_level;
|
|
uint8_t hdmi_boost_level;
|
|
};
|
|
|
|
enum psr_lines_to_wait {
|
|
PSR_0_LINES_TO_WAIT = 0,
|
|
PSR_1_LINE_TO_WAIT,
|
|
PSR_4_LINES_TO_WAIT,
|
|
PSR_8_LINES_TO_WAIT
|
|
};
|
|
|
|
struct intel_vbt_data {
|
|
struct drm_display_mode *lfp_lvds_vbt_mode; /* if any */
|
|
struct drm_display_mode *sdvo_lvds_vbt_mode; /* if any */
|
|
|
|
/* Feature bits */
|
|
unsigned int int_tv_support:1;
|
|
unsigned int lvds_dither:1;
|
|
unsigned int lvds_vbt:1;
|
|
unsigned int int_crt_support:1;
|
|
unsigned int lvds_use_ssc:1;
|
|
unsigned int display_clock_mode:1;
|
|
unsigned int fdi_rx_polarity_inverted:1;
|
|
unsigned int panel_type:4;
|
|
int lvds_ssc_freq;
|
|
unsigned int bios_lvds_val; /* initial [PCH_]LVDS reg val in VBIOS */
|
|
|
|
enum drrs_support_type drrs_type;
|
|
|
|
struct {
|
|
int rate;
|
|
int lanes;
|
|
int preemphasis;
|
|
int vswing;
|
|
bool low_vswing;
|
|
bool initialized;
|
|
bool support;
|
|
int bpp;
|
|
struct edp_power_seq pps;
|
|
} edp;
|
|
|
|
struct {
|
|
bool full_link;
|
|
bool require_aux_wakeup;
|
|
int idle_frames;
|
|
enum psr_lines_to_wait lines_to_wait;
|
|
int tp1_wakeup_time;
|
|
int tp2_tp3_wakeup_time;
|
|
} psr;
|
|
|
|
struct {
|
|
u16 pwm_freq_hz;
|
|
bool present;
|
|
bool active_low_pwm;
|
|
u8 min_brightness; /* min_brightness/255 of max */
|
|
enum intel_backlight_type type;
|
|
} backlight;
|
|
|
|
/* MIPI DSI */
|
|
struct {
|
|
u16 panel_id;
|
|
struct mipi_config *config;
|
|
struct mipi_pps_data *pps;
|
|
u8 seq_version;
|
|
u32 size;
|
|
u8 *data;
|
|
const u8 *sequence[MIPI_SEQ_MAX];
|
|
} dsi;
|
|
|
|
int crt_ddc_pin;
|
|
|
|
int child_dev_num;
|
|
union child_device_config *child_dev;
|
|
|
|
struct ddi_vbt_port_info ddi_port_info[I915_MAX_PORTS];
|
|
struct sdvo_device_mapping sdvo_mappings[2];
|
|
};
|
|
|
|
enum intel_ddb_partitioning {
|
|
INTEL_DDB_PART_1_2,
|
|
INTEL_DDB_PART_5_6, /* IVB+ */
|
|
};
|
|
|
|
struct intel_wm_level {
|
|
bool enable;
|
|
uint32_t pri_val;
|
|
uint32_t spr_val;
|
|
uint32_t cur_val;
|
|
uint32_t fbc_val;
|
|
};
|
|
|
|
struct ilk_wm_values {
|
|
uint32_t wm_pipe[3];
|
|
uint32_t wm_lp[3];
|
|
uint32_t wm_lp_spr[3];
|
|
uint32_t wm_linetime[3];
|
|
bool enable_fbc_wm;
|
|
enum intel_ddb_partitioning partitioning;
|
|
};
|
|
|
|
struct vlv_pipe_wm {
|
|
uint16_t primary;
|
|
uint16_t sprite[2];
|
|
uint8_t cursor;
|
|
};
|
|
|
|
struct vlv_sr_wm {
|
|
uint16_t plane;
|
|
uint8_t cursor;
|
|
};
|
|
|
|
struct vlv_wm_values {
|
|
struct vlv_pipe_wm pipe[3];
|
|
struct vlv_sr_wm sr;
|
|
struct {
|
|
uint8_t cursor;
|
|
uint8_t sprite[2];
|
|
uint8_t primary;
|
|
} ddl[3];
|
|
uint8_t level;
|
|
bool cxsr;
|
|
};
|
|
|
|
struct skl_ddb_entry {
|
|
uint16_t start, end; /* in number of blocks, 'end' is exclusive */
|
|
};
|
|
|
|
static inline uint16_t skl_ddb_entry_size(const struct skl_ddb_entry *entry)
|
|
{
|
|
return entry->end - entry->start;
|
|
}
|
|
|
|
static inline bool skl_ddb_entry_equal(const struct skl_ddb_entry *e1,
|
|
const struct skl_ddb_entry *e2)
|
|
{
|
|
if (e1->start == e2->start && e1->end == e2->end)
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
struct skl_ddb_allocation {
|
|
struct skl_ddb_entry pipe[I915_MAX_PIPES];
|
|
struct skl_ddb_entry plane[I915_MAX_PIPES][I915_MAX_PLANES]; /* packed/uv */
|
|
struct skl_ddb_entry y_plane[I915_MAX_PIPES][I915_MAX_PLANES];
|
|
};
|
|
|
|
struct skl_wm_values {
|
|
unsigned dirty_pipes;
|
|
struct skl_ddb_allocation ddb;
|
|
uint32_t wm_linetime[I915_MAX_PIPES];
|
|
uint32_t plane[I915_MAX_PIPES][I915_MAX_PLANES][8];
|
|
uint32_t plane_trans[I915_MAX_PIPES][I915_MAX_PLANES];
|
|
};
|
|
|
|
struct skl_wm_level {
|
|
bool plane_en[I915_MAX_PLANES];
|
|
uint16_t plane_res_b[I915_MAX_PLANES];
|
|
uint8_t plane_res_l[I915_MAX_PLANES];
|
|
};
|
|
|
|
/*
|
|
* This struct helps tracking the state needed for runtime PM, which puts the
|
|
* device in PCI D3 state. Notice that when this happens, nothing on the
|
|
* graphics device works, even register access, so we don't get interrupts nor
|
|
* anything else.
|
|
*
|
|
* Every piece of our code that needs to actually touch the hardware needs to
|
|
* either call intel_runtime_pm_get or call intel_display_power_get with the
|
|
* appropriate power domain.
|
|
*
|
|
* Our driver uses the autosuspend delay feature, which means we'll only really
|
|
* suspend if we stay with zero refcount for a certain amount of time. The
|
|
* default value is currently very conservative (see intel_runtime_pm_enable), but
|
|
* it can be changed with the standard runtime PM files from sysfs.
|
|
*
|
|
* The irqs_disabled variable becomes true exactly after we disable the IRQs and
|
|
* goes back to false exactly before we reenable the IRQs. We use this variable
|
|
* to check if someone is trying to enable/disable IRQs while they're supposed
|
|
* to be disabled. This shouldn't happen and we'll print some error messages in
|
|
* case it happens.
|
|
*
|
|
* For more, read the Documentation/power/runtime_pm.txt.
|
|
*/
|
|
struct i915_runtime_pm {
|
|
atomic_t wakeref_count;
|
|
atomic_t atomic_seq;
|
|
bool suspended;
|
|
bool irqs_enabled;
|
|
};
|
|
|
|
enum intel_pipe_crc_source {
|
|
INTEL_PIPE_CRC_SOURCE_NONE,
|
|
INTEL_PIPE_CRC_SOURCE_PLANE1,
|
|
INTEL_PIPE_CRC_SOURCE_PLANE2,
|
|
INTEL_PIPE_CRC_SOURCE_PF,
|
|
INTEL_PIPE_CRC_SOURCE_PIPE,
|
|
/* TV/DP on pre-gen5/vlv can't use the pipe source. */
|
|
INTEL_PIPE_CRC_SOURCE_TV,
|
|
INTEL_PIPE_CRC_SOURCE_DP_B,
|
|
INTEL_PIPE_CRC_SOURCE_DP_C,
|
|
INTEL_PIPE_CRC_SOURCE_DP_D,
|
|
INTEL_PIPE_CRC_SOURCE_AUTO,
|
|
INTEL_PIPE_CRC_SOURCE_MAX,
|
|
};
|
|
|
|
struct intel_pipe_crc_entry {
|
|
uint32_t frame;
|
|
uint32_t crc[5];
|
|
};
|
|
|
|
#define INTEL_PIPE_CRC_ENTRIES_NR 128
|
|
struct intel_pipe_crc {
|
|
spinlock_t lock;
|
|
bool opened; /* exclusive access to the result file */
|
|
struct intel_pipe_crc_entry *entries;
|
|
enum intel_pipe_crc_source source;
|
|
int head, tail;
|
|
wait_queue_head_t wq;
|
|
};
|
|
|
|
struct i915_frontbuffer_tracking {
|
|
struct mutex lock;
|
|
|
|
/*
|
|
* Tracking bits for delayed frontbuffer flushing du to gpu activity or
|
|
* scheduled flips.
|
|
*/
|
|
unsigned busy_bits;
|
|
unsigned flip_bits;
|
|
};
|
|
|
|
struct i915_wa_reg {
|
|
i915_reg_t addr;
|
|
u32 value;
|
|
/* bitmask representing WA bits */
|
|
u32 mask;
|
|
};
|
|
|
|
/*
|
|
* RING_MAX_NONPRIV_SLOTS is per-engine but at this point we are only
|
|
* allowing it for RCS as we don't foresee any requirement of having
|
|
* a whitelist for other engines. When it is really required for
|
|
* other engines then the limit need to be increased.
|
|
*/
|
|
#define I915_MAX_WA_REGS (16 + RING_MAX_NONPRIV_SLOTS)
|
|
|
|
struct i915_workarounds {
|
|
struct i915_wa_reg reg[I915_MAX_WA_REGS];
|
|
u32 count;
|
|
u32 hw_whitelist_count[I915_NUM_ENGINES];
|
|
};
|
|
|
|
struct i915_virtual_gpu {
|
|
bool active;
|
|
};
|
|
|
|
struct i915_execbuffer_params {
|
|
struct drm_device *dev;
|
|
struct drm_file *file;
|
|
uint32_t dispatch_flags;
|
|
uint32_t args_batch_start_offset;
|
|
uint64_t batch_obj_vm_offset;
|
|
struct intel_engine_cs *engine;
|
|
struct drm_i915_gem_object *batch_obj;
|
|
struct i915_gem_context *ctx;
|
|
struct drm_i915_gem_request *request;
|
|
};
|
|
|
|
/* used in computing the new watermarks state */
|
|
struct intel_wm_config {
|
|
unsigned int num_pipes_active;
|
|
bool sprites_enabled;
|
|
bool sprites_scaled;
|
|
};
|
|
|
|
struct drm_i915_private {
|
|
struct drm_device drm;
|
|
|
|
struct kmem_cache *objects;
|
|
struct kmem_cache *vmas;
|
|
struct kmem_cache *requests;
|
|
|
|
const struct intel_device_info info;
|
|
|
|
int relative_constants_mode;
|
|
|
|
void __iomem *regs;
|
|
|
|
struct intel_uncore uncore;
|
|
|
|
struct i915_virtual_gpu vgpu;
|
|
|
|
struct intel_gvt gvt;
|
|
|
|
struct intel_guc guc;
|
|
|
|
struct intel_csr csr;
|
|
|
|
struct intel_gmbus gmbus[GMBUS_NUM_PINS];
|
|
|
|
/** gmbus_mutex protects against concurrent usage of the single hw gmbus
|
|
* controller on different i2c buses. */
|
|
struct mutex gmbus_mutex;
|
|
|
|
/**
|
|
* Base address of the gmbus and gpio block.
|
|
*/
|
|
uint32_t gpio_mmio_base;
|
|
|
|
/* MMIO base address for MIPI regs */
|
|
uint32_t mipi_mmio_base;
|
|
|
|
uint32_t psr_mmio_base;
|
|
|
|
wait_queue_head_t gmbus_wait_queue;
|
|
|
|
struct pci_dev *bridge_dev;
|
|
struct i915_gem_context *kernel_context;
|
|
struct intel_engine_cs engine[I915_NUM_ENGINES];
|
|
struct drm_i915_gem_object *semaphore_obj;
|
|
uint32_t last_seqno, next_seqno;
|
|
|
|
struct drm_dma_handle *status_page_dmah;
|
|
struct resource mch_res;
|
|
|
|
/* protects the irq masks */
|
|
spinlock_t irq_lock;
|
|
|
|
/* protects the mmio flip data */
|
|
spinlock_t mmio_flip_lock;
|
|
|
|
bool display_irqs_enabled;
|
|
|
|
/* To control wakeup latency, e.g. for irq-driven dp aux transfers. */
|
|
struct pm_qos_request pm_qos;
|
|
|
|
/* Sideband mailbox protection */
|
|
struct mutex sb_lock;
|
|
|
|
/** Cached value of IMR to avoid reads in updating the bitfield */
|
|
union {
|
|
u32 irq_mask;
|
|
u32 de_irq_mask[I915_MAX_PIPES];
|
|
};
|
|
u32 gt_irq_mask;
|
|
u32 pm_irq_mask;
|
|
u32 pm_rps_events;
|
|
u32 pipestat_irq_mask[I915_MAX_PIPES];
|
|
|
|
struct i915_hotplug hotplug;
|
|
struct intel_fbc fbc;
|
|
struct i915_drrs drrs;
|
|
struct intel_opregion opregion;
|
|
struct intel_vbt_data vbt;
|
|
|
|
bool preserve_bios_swizzle;
|
|
|
|
/* overlay */
|
|
struct intel_overlay *overlay;
|
|
|
|
/* backlight registers and fields in struct intel_panel */
|
|
struct mutex backlight_lock;
|
|
|
|
/* LVDS info */
|
|
bool no_aux_handshake;
|
|
|
|
/* protects panel power sequencer state */
|
|
struct mutex pps_mutex;
|
|
|
|
struct drm_i915_fence_reg fence_regs[I915_MAX_NUM_FENCES]; /* assume 965 */
|
|
int num_fence_regs; /* 8 on pre-965, 16 otherwise */
|
|
|
|
unsigned int fsb_freq, mem_freq, is_ddr3;
|
|
unsigned int skl_preferred_vco_freq;
|
|
unsigned int cdclk_freq, max_cdclk_freq, atomic_cdclk_freq;
|
|
unsigned int max_dotclk_freq;
|
|
unsigned int rawclk_freq;
|
|
unsigned int hpll_freq;
|
|
unsigned int czclk_freq;
|
|
|
|
struct {
|
|
unsigned int vco, ref;
|
|
} cdclk_pll;
|
|
|
|
/**
|
|
* wq - Driver workqueue for GEM.
|
|
*
|
|
* NOTE: Work items scheduled here are not allowed to grab any modeset
|
|
* locks, for otherwise the flushing done in the pageflip code will
|
|
* result in deadlocks.
|
|
*/
|
|
struct workqueue_struct *wq;
|
|
|
|
/* Display functions */
|
|
struct drm_i915_display_funcs display;
|
|
|
|
/* PCH chipset type */
|
|
enum intel_pch pch_type;
|
|
unsigned short pch_id;
|
|
|
|
unsigned long quirks;
|
|
|
|
enum modeset_restore modeset_restore;
|
|
struct mutex modeset_restore_lock;
|
|
struct drm_atomic_state *modeset_restore_state;
|
|
struct drm_modeset_acquire_ctx reset_ctx;
|
|
|
|
struct list_head vm_list; /* Global list of all address spaces */
|
|
struct i915_ggtt ggtt; /* VM representing the global address space */
|
|
|
|
struct i915_gem_mm mm;
|
|
DECLARE_HASHTABLE(mm_structs, 7);
|
|
struct mutex mm_lock;
|
|
|
|
/* The hw wants to have a stable context identifier for the lifetime
|
|
* of the context (for OA, PASID, faults, etc). This is limited
|
|
* in execlists to 21 bits.
|
|
*/
|
|
struct ida context_hw_ida;
|
|
#define MAX_CONTEXT_HW_ID (1<<21) /* exclusive */
|
|
|
|
/* Kernel Modesetting */
|
|
|
|
struct drm_crtc *plane_to_crtc_mapping[I915_MAX_PIPES];
|
|
struct drm_crtc *pipe_to_crtc_mapping[I915_MAX_PIPES];
|
|
wait_queue_head_t pending_flip_queue;
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
struct intel_pipe_crc pipe_crc[I915_MAX_PIPES];
|
|
#endif
|
|
|
|
/* dpll and cdclk state is protected by connection_mutex */
|
|
int num_shared_dpll;
|
|
struct intel_shared_dpll shared_dplls[I915_NUM_PLLS];
|
|
const struct intel_dpll_mgr *dpll_mgr;
|
|
|
|
/*
|
|
* dpll_lock serializes intel_{prepare,enable,disable}_shared_dpll.
|
|
* Must be global rather than per dpll, because on some platforms
|
|
* plls share registers.
|
|
*/
|
|
struct mutex dpll_lock;
|
|
|
|
unsigned int active_crtcs;
|
|
unsigned int min_pixclk[I915_MAX_PIPES];
|
|
|
|
int dpio_phy_iosf_port[I915_NUM_PHYS_VLV];
|
|
|
|
struct i915_workarounds workarounds;
|
|
|
|
struct i915_frontbuffer_tracking fb_tracking;
|
|
|
|
u16 orig_clock;
|
|
|
|
bool mchbar_need_disable;
|
|
|
|
struct intel_l3_parity l3_parity;
|
|
|
|
/* Cannot be determined by PCIID. You must always read a register. */
|
|
u32 edram_cap;
|
|
|
|
/* gen6+ rps state */
|
|
struct intel_gen6_power_mgmt rps;
|
|
|
|
/* ilk-only ips/rps state. Everything in here is protected by the global
|
|
* mchdev_lock in intel_pm.c */
|
|
struct intel_ilk_power_mgmt ips;
|
|
|
|
struct i915_power_domains power_domains;
|
|
|
|
struct i915_psr psr;
|
|
|
|
struct i915_gpu_error gpu_error;
|
|
|
|
struct drm_i915_gem_object *vlv_pctx;
|
|
|
|
#ifdef CONFIG_DRM_FBDEV_EMULATION
|
|
/* list of fbdev register on this device */
|
|
struct intel_fbdev *fbdev;
|
|
struct work_struct fbdev_suspend_work;
|
|
#endif
|
|
|
|
struct drm_property *broadcast_rgb_property;
|
|
struct drm_property *force_audio_property;
|
|
|
|
/* hda/i915 audio component */
|
|
struct i915_audio_component *audio_component;
|
|
bool audio_component_registered;
|
|
/**
|
|
* av_mutex - mutex for audio/video sync
|
|
*
|
|
*/
|
|
struct mutex av_mutex;
|
|
|
|
uint32_t hw_context_size;
|
|
struct list_head context_list;
|
|
|
|
u32 fdi_rx_config;
|
|
|
|
/* Shadow for DISPLAY_PHY_CONTROL which can't be safely read */
|
|
u32 chv_phy_control;
|
|
/*
|
|
* Shadows for CHV DPLL_MD regs to keep the state
|
|
* checker somewhat working in the presence hardware
|
|
* crappiness (can't read out DPLL_MD for pipes B & C).
|
|
*/
|
|
u32 chv_dpll_md[I915_MAX_PIPES];
|
|
u32 bxt_phy_grc;
|
|
|
|
u32 suspend_count;
|
|
bool suspended_to_idle;
|
|
struct i915_suspend_saved_registers regfile;
|
|
struct vlv_s0ix_state vlv_s0ix_state;
|
|
|
|
enum {
|
|
I915_SKL_SAGV_UNKNOWN = 0,
|
|
I915_SKL_SAGV_DISABLED,
|
|
I915_SKL_SAGV_ENABLED,
|
|
I915_SKL_SAGV_NOT_CONTROLLED
|
|
} skl_sagv_status;
|
|
|
|
struct {
|
|
/*
|
|
* Raw watermark latency values:
|
|
* in 0.1us units for WM0,
|
|
* in 0.5us units for WM1+.
|
|
*/
|
|
/* primary */
|
|
uint16_t pri_latency[5];
|
|
/* sprite */
|
|
uint16_t spr_latency[5];
|
|
/* cursor */
|
|
uint16_t cur_latency[5];
|
|
/*
|
|
* Raw watermark memory latency values
|
|
* for SKL for all 8 levels
|
|
* in 1us units.
|
|
*/
|
|
uint16_t skl_latency[8];
|
|
|
|
/*
|
|
* The skl_wm_values structure is a bit too big for stack
|
|
* allocation, so we keep the staging struct where we store
|
|
* intermediate results here instead.
|
|
*/
|
|
struct skl_wm_values skl_results;
|
|
|
|
/* current hardware state */
|
|
union {
|
|
struct ilk_wm_values hw;
|
|
struct skl_wm_values skl_hw;
|
|
struct vlv_wm_values vlv;
|
|
};
|
|
|
|
uint8_t max_level;
|
|
|
|
/*
|
|
* Should be held around atomic WM register writing; also
|
|
* protects * intel_crtc->wm.active and
|
|
* cstate->wm.need_postvbl_update.
|
|
*/
|
|
struct mutex wm_mutex;
|
|
|
|
/*
|
|
* Set during HW readout of watermarks/DDB. Some platforms
|
|
* need to know when we're still using BIOS-provided values
|
|
* (which we don't fully trust).
|
|
*/
|
|
bool distrust_bios_wm;
|
|
} wm;
|
|
|
|
struct i915_runtime_pm pm;
|
|
|
|
/* Abstract the submission mechanism (legacy ringbuffer or execlists) away */
|
|
struct {
|
|
int (*execbuf_submit)(struct i915_execbuffer_params *params,
|
|
struct drm_i915_gem_execbuffer2 *args,
|
|
struct list_head *vmas);
|
|
int (*init_engines)(struct drm_device *dev);
|
|
void (*cleanup_engine)(struct intel_engine_cs *engine);
|
|
void (*stop_engine)(struct intel_engine_cs *engine);
|
|
|
|
/**
|
|
* Is the GPU currently considered idle, or busy executing
|
|
* userspace requests? Whilst idle, we allow runtime power
|
|
* management to power down the hardware and display clocks.
|
|
* In order to reduce the effect on performance, there
|
|
* is a slight delay before we do so.
|
|
*/
|
|
unsigned int active_engines;
|
|
bool awake;
|
|
|
|
/**
|
|
* We leave the user IRQ off as much as possible,
|
|
* but this means that requests will finish and never
|
|
* be retired once the system goes idle. Set a timer to
|
|
* fire periodically while the ring is running. When it
|
|
* fires, go retire requests.
|
|
*/
|
|
struct delayed_work retire_work;
|
|
|
|
/**
|
|
* When we detect an idle GPU, we want to turn on
|
|
* powersaving features. So once we see that there
|
|
* are no more requests outstanding and no more
|
|
* arrive within a small period of time, we fire
|
|
* off the idle_work.
|
|
*/
|
|
struct delayed_work idle_work;
|
|
} gt;
|
|
|
|
/* perform PHY state sanity checks? */
|
|
bool chv_phy_assert[2];
|
|
|
|
struct intel_encoder *dig_port_map[I915_MAX_PORTS];
|
|
|
|
/*
|
|
* NOTE: This is the dri1/ums dungeon, don't add stuff here. Your patch
|
|
* will be rejected. Instead look for a better place.
|
|
*/
|
|
};
|
|
|
|
static inline struct drm_i915_private *to_i915(const struct drm_device *dev)
|
|
{
|
|
return container_of(dev, struct drm_i915_private, drm);
|
|
}
|
|
|
|
static inline struct drm_i915_private *dev_to_i915(struct device *dev)
|
|
{
|
|
return to_i915(dev_get_drvdata(dev));
|
|
}
|
|
|
|
static inline struct drm_i915_private *guc_to_i915(struct intel_guc *guc)
|
|
{
|
|
return container_of(guc, struct drm_i915_private, guc);
|
|
}
|
|
|
|
/* Simple iterator over all initialised engines */
|
|
#define for_each_engine(engine__, dev_priv__) \
|
|
for ((engine__) = &(dev_priv__)->engine[0]; \
|
|
(engine__) < &(dev_priv__)->engine[I915_NUM_ENGINES]; \
|
|
(engine__)++) \
|
|
for_each_if (intel_engine_initialized(engine__))
|
|
|
|
/* Iterator with engine_id */
|
|
#define for_each_engine_id(engine__, dev_priv__, id__) \
|
|
for ((engine__) = &(dev_priv__)->engine[0], (id__) = 0; \
|
|
(engine__) < &(dev_priv__)->engine[I915_NUM_ENGINES]; \
|
|
(engine__)++) \
|
|
for_each_if (((id__) = (engine__)->id, \
|
|
intel_engine_initialized(engine__)))
|
|
|
|
/* Iterator over subset of engines selected by mask */
|
|
#define for_each_engine_masked(engine__, dev_priv__, mask__) \
|
|
for ((engine__) = &(dev_priv__)->engine[0]; \
|
|
(engine__) < &(dev_priv__)->engine[I915_NUM_ENGINES]; \
|
|
(engine__)++) \
|
|
for_each_if (((mask__) & intel_engine_flag(engine__)) && \
|
|
intel_engine_initialized(engine__))
|
|
|
|
enum hdmi_force_audio {
|
|
HDMI_AUDIO_OFF_DVI = -2, /* no aux data for HDMI-DVI converter */
|
|
HDMI_AUDIO_OFF, /* force turn off HDMI audio */
|
|
HDMI_AUDIO_AUTO, /* trust EDID */
|
|
HDMI_AUDIO_ON, /* force turn on HDMI audio */
|
|
};
|
|
|
|
#define I915_GTT_OFFSET_NONE ((u32)-1)
|
|
|
|
struct drm_i915_gem_object_ops {
|
|
unsigned int flags;
|
|
#define I915_GEM_OBJECT_HAS_STRUCT_PAGE 0x1
|
|
|
|
/* Interface between the GEM object and its backing storage.
|
|
* get_pages() is called once prior to the use of the associated set
|
|
* of pages before to binding them into the GTT, and put_pages() is
|
|
* called after we no longer need them. As we expect there to be
|
|
* associated cost with migrating pages between the backing storage
|
|
* and making them available for the GPU (e.g. clflush), we may hold
|
|
* onto the pages after they are no longer referenced by the GPU
|
|
* in case they may be used again shortly (for example migrating the
|
|
* pages to a different memory domain within the GTT). put_pages()
|
|
* will therefore most likely be called when the object itself is
|
|
* being released or under memory pressure (where we attempt to
|
|
* reap pages for the shrinker).
|
|
*/
|
|
int (*get_pages)(struct drm_i915_gem_object *);
|
|
void (*put_pages)(struct drm_i915_gem_object *);
|
|
|
|
int (*dmabuf_export)(struct drm_i915_gem_object *);
|
|
void (*release)(struct drm_i915_gem_object *);
|
|
};
|
|
|
|
/*
|
|
* Frontbuffer tracking bits. Set in obj->frontbuffer_bits while a gem bo is
|
|
* considered to be the frontbuffer for the given plane interface-wise. This
|
|
* doesn't mean that the hw necessarily already scans it out, but that any
|
|
* rendering (by the cpu or gpu) will land in the frontbuffer eventually.
|
|
*
|
|
* We have one bit per pipe and per scanout plane type.
|
|
*/
|
|
#define INTEL_MAX_SPRITE_BITS_PER_PIPE 5
|
|
#define INTEL_FRONTBUFFER_BITS_PER_PIPE 8
|
|
#define INTEL_FRONTBUFFER_BITS \
|
|
(INTEL_FRONTBUFFER_BITS_PER_PIPE * I915_MAX_PIPES)
|
|
#define INTEL_FRONTBUFFER_PRIMARY(pipe) \
|
|
(1 << (INTEL_FRONTBUFFER_BITS_PER_PIPE * (pipe)))
|
|
#define INTEL_FRONTBUFFER_CURSOR(pipe) \
|
|
(1 << (1 + (INTEL_FRONTBUFFER_BITS_PER_PIPE * (pipe))))
|
|
#define INTEL_FRONTBUFFER_SPRITE(pipe, plane) \
|
|
(1 << (2 + plane + (INTEL_FRONTBUFFER_BITS_PER_PIPE * (pipe))))
|
|
#define INTEL_FRONTBUFFER_OVERLAY(pipe) \
|
|
(1 << (2 + INTEL_MAX_SPRITE_BITS_PER_PIPE + (INTEL_FRONTBUFFER_BITS_PER_PIPE * (pipe))))
|
|
#define INTEL_FRONTBUFFER_ALL_MASK(pipe) \
|
|
(0xff << (INTEL_FRONTBUFFER_BITS_PER_PIPE * (pipe)))
|
|
|
|
struct drm_i915_gem_object {
|
|
struct drm_gem_object base;
|
|
|
|
const struct drm_i915_gem_object_ops *ops;
|
|
|
|
/** List of VMAs backed by this object */
|
|
struct list_head vma_list;
|
|
|
|
/** Stolen memory for this object, instead of being backed by shmem. */
|
|
struct drm_mm_node *stolen;
|
|
struct list_head global_list;
|
|
|
|
struct list_head engine_list[I915_NUM_ENGINES];
|
|
/** Used in execbuf to temporarily hold a ref */
|
|
struct list_head obj_exec_link;
|
|
|
|
struct list_head batch_pool_link;
|
|
|
|
/**
|
|
* This is set if the object is on the active lists (has pending
|
|
* rendering and so a non-zero seqno), and is not set if it i s on
|
|
* inactive (ready to be unbound) list.
|
|
*/
|
|
unsigned int active:I915_NUM_ENGINES;
|
|
|
|
/**
|
|
* This is set if the object has been written to since last bound
|
|
* to the GTT
|
|
*/
|
|
unsigned int dirty:1;
|
|
|
|
/**
|
|
* Fence register bits (if any) for this object. Will be set
|
|
* as needed when mapped into the GTT.
|
|
* Protected by dev->struct_mutex.
|
|
*/
|
|
signed int fence_reg:I915_MAX_NUM_FENCE_BITS;
|
|
|
|
/**
|
|
* Advice: are the backing pages purgeable?
|
|
*/
|
|
unsigned int madv:2;
|
|
|
|
/**
|
|
* Current tiling mode for the object.
|
|
*/
|
|
unsigned int tiling_mode:2;
|
|
/**
|
|
* Whether the tiling parameters for the currently associated fence
|
|
* register have changed. Note that for the purposes of tracking
|
|
* tiling changes we also treat the unfenced register, the register
|
|
* slot that the object occupies whilst it executes a fenced
|
|
* command (such as BLT on gen2/3), as a "fence".
|
|
*/
|
|
unsigned int fence_dirty:1;
|
|
|
|
/**
|
|
* Is the object at the current location in the gtt mappable and
|
|
* fenceable? Used to avoid costly recalculations.
|
|
*/
|
|
unsigned int map_and_fenceable:1;
|
|
|
|
/**
|
|
* Whether the current gtt mapping needs to be mappable (and isn't just
|
|
* mappable by accident). Track pin and fault separate for a more
|
|
* accurate mappable working set.
|
|
*/
|
|
unsigned int fault_mappable:1;
|
|
|
|
/*
|
|
* Is the object to be mapped as read-only to the GPU
|
|
* Only honoured if hardware has relevant pte bit
|
|
*/
|
|
unsigned long gt_ro:1;
|
|
unsigned int cache_level:3;
|
|
unsigned int cache_dirty:1;
|
|
|
|
unsigned int frontbuffer_bits:INTEL_FRONTBUFFER_BITS;
|
|
|
|
unsigned int has_wc_mmap;
|
|
unsigned int pin_display;
|
|
|
|
struct sg_table *pages;
|
|
int pages_pin_count;
|
|
struct get_page {
|
|
struct scatterlist *sg;
|
|
int last;
|
|
} get_page;
|
|
void *mapping;
|
|
|
|
/** Breadcrumb of last rendering to the buffer.
|
|
* There can only be one writer, but we allow for multiple readers.
|
|
* If there is a writer that necessarily implies that all other
|
|
* read requests are complete - but we may only be lazily clearing
|
|
* the read requests. A read request is naturally the most recent
|
|
* request on a ring, so we may have two different write and read
|
|
* requests on one ring where the write request is older than the
|
|
* read request. This allows for the CPU to read from an active
|
|
* buffer by only waiting for the write to complete.
|
|
* */
|
|
struct drm_i915_gem_request *last_read_req[I915_NUM_ENGINES];
|
|
struct drm_i915_gem_request *last_write_req;
|
|
/** Breadcrumb of last fenced GPU access to the buffer. */
|
|
struct drm_i915_gem_request *last_fenced_req;
|
|
|
|
/** Current tiling stride for the object, if it's tiled. */
|
|
uint32_t stride;
|
|
|
|
/** References from framebuffers, locks out tiling changes. */
|
|
unsigned long framebuffer_references;
|
|
|
|
/** Record of address bit 17 of each page at last unbind. */
|
|
unsigned long *bit_17;
|
|
|
|
union {
|
|
/** for phy allocated objects */
|
|
struct drm_dma_handle *phys_handle;
|
|
|
|
struct i915_gem_userptr {
|
|
uintptr_t ptr;
|
|
unsigned read_only :1;
|
|
unsigned workers :4;
|
|
#define I915_GEM_USERPTR_MAX_WORKERS 15
|
|
|
|
struct i915_mm_struct *mm;
|
|
struct i915_mmu_object *mmu_object;
|
|
struct work_struct *work;
|
|
} userptr;
|
|
};
|
|
};
|
|
#define to_intel_bo(x) container_of(x, struct drm_i915_gem_object, base)
|
|
|
|
static inline bool
|
|
i915_gem_object_has_struct_page(const struct drm_i915_gem_object *obj)
|
|
{
|
|
return obj->ops->flags & I915_GEM_OBJECT_HAS_STRUCT_PAGE;
|
|
}
|
|
|
|
/*
|
|
* Optimised SGL iterator for GEM objects
|
|
*/
|
|
static __always_inline struct sgt_iter {
|
|
struct scatterlist *sgp;
|
|
union {
|
|
unsigned long pfn;
|
|
dma_addr_t dma;
|
|
};
|
|
unsigned int curr;
|
|
unsigned int max;
|
|
} __sgt_iter(struct scatterlist *sgl, bool dma) {
|
|
struct sgt_iter s = { .sgp = sgl };
|
|
|
|
if (s.sgp) {
|
|
s.max = s.curr = s.sgp->offset;
|
|
s.max += s.sgp->length;
|
|
if (dma)
|
|
s.dma = sg_dma_address(s.sgp);
|
|
else
|
|
s.pfn = page_to_pfn(sg_page(s.sgp));
|
|
}
|
|
|
|
return s;
|
|
}
|
|
|
|
/**
|
|
* __sg_next - return the next scatterlist entry in a list
|
|
* @sg: The current sg entry
|
|
*
|
|
* Description:
|
|
* If the entry is the last, return NULL; otherwise, step to the next
|
|
* element in the array (@sg@+1). If that's a chain pointer, follow it;
|
|
* otherwise just return the pointer to the current element.
|
|
**/
|
|
static inline struct scatterlist *__sg_next(struct scatterlist *sg)
|
|
{
|
|
#ifdef CONFIG_DEBUG_SG
|
|
BUG_ON(sg->sg_magic != SG_MAGIC);
|
|
#endif
|
|
return sg_is_last(sg) ? NULL :
|
|
likely(!sg_is_chain(++sg)) ? sg :
|
|
sg_chain_ptr(sg);
|
|
}
|
|
|
|
/**
|
|
* for_each_sgt_dma - iterate over the DMA addresses of the given sg_table
|
|
* @__dmap: DMA address (output)
|
|
* @__iter: 'struct sgt_iter' (iterator state, internal)
|
|
* @__sgt: sg_table to iterate over (input)
|
|
*/
|
|
#define for_each_sgt_dma(__dmap, __iter, __sgt) \
|
|
for ((__iter) = __sgt_iter((__sgt)->sgl, true); \
|
|
((__dmap) = (__iter).dma + (__iter).curr); \
|
|
(((__iter).curr += PAGE_SIZE) < (__iter).max) || \
|
|
((__iter) = __sgt_iter(__sg_next((__iter).sgp), true), 0))
|
|
|
|
/**
|
|
* for_each_sgt_page - iterate over the pages of the given sg_table
|
|
* @__pp: page pointer (output)
|
|
* @__iter: 'struct sgt_iter' (iterator state, internal)
|
|
* @__sgt: sg_table to iterate over (input)
|
|
*/
|
|
#define for_each_sgt_page(__pp, __iter, __sgt) \
|
|
for ((__iter) = __sgt_iter((__sgt)->sgl, false); \
|
|
((__pp) = (__iter).pfn == 0 ? NULL : \
|
|
pfn_to_page((__iter).pfn + ((__iter).curr >> PAGE_SHIFT))); \
|
|
(((__iter).curr += PAGE_SIZE) < (__iter).max) || \
|
|
((__iter) = __sgt_iter(__sg_next((__iter).sgp), false), 0))
|
|
|
|
/**
|
|
* Request queue structure.
|
|
*
|
|
* The request queue allows us to note sequence numbers that have been emitted
|
|
* and may be associated with active buffers to be retired.
|
|
*
|
|
* By keeping this list, we can avoid having to do questionable sequence
|
|
* number comparisons on buffer last_read|write_seqno. It also allows an
|
|
* emission time to be associated with the request for tracking how far ahead
|
|
* of the GPU the submission is.
|
|
*
|
|
* The requests are reference counted, so upon creation they should have an
|
|
* initial reference taken using kref_init
|
|
*/
|
|
struct drm_i915_gem_request {
|
|
struct kref ref;
|
|
|
|
/** On Which ring this request was generated */
|
|
struct drm_i915_private *i915;
|
|
struct intel_engine_cs *engine;
|
|
struct intel_signal_node signaling;
|
|
|
|
/** GEM sequence number associated with the previous request,
|
|
* when the HWS breadcrumb is equal to this the GPU is processing
|
|
* this request.
|
|
*/
|
|
u32 previous_seqno;
|
|
|
|
/** GEM sequence number associated with this request,
|
|
* when the HWS breadcrumb is equal or greater than this the GPU
|
|
* has finished processing this request.
|
|
*/
|
|
u32 seqno;
|
|
|
|
/** Position in the ringbuffer of the start of the request */
|
|
u32 head;
|
|
|
|
/**
|
|
* Position in the ringbuffer of the start of the postfix.
|
|
* This is required to calculate the maximum available ringbuffer
|
|
* space without overwriting the postfix.
|
|
*/
|
|
u32 postfix;
|
|
|
|
/** Position in the ringbuffer of the end of the whole request */
|
|
u32 tail;
|
|
|
|
/** Preallocate space in the ringbuffer for the emitting the request */
|
|
u32 reserved_space;
|
|
|
|
/**
|
|
* Context and ring buffer related to this request
|
|
* Contexts are refcounted, so when this request is associated with a
|
|
* context, we must increment the context's refcount, to guarantee that
|
|
* it persists while any request is linked to it. Requests themselves
|
|
* are also refcounted, so the request will only be freed when the last
|
|
* reference to it is dismissed, and the code in
|
|
* i915_gem_request_free() will then decrement the refcount on the
|
|
* context.
|
|
*/
|
|
struct i915_gem_context *ctx;
|
|
struct intel_ringbuffer *ringbuf;
|
|
|
|
/**
|
|
* Context related to the previous request.
|
|
* As the contexts are accessed by the hardware until the switch is
|
|
* completed to a new context, the hardware may still be writing
|
|
* to the context object after the breadcrumb is visible. We must
|
|
* not unpin/unbind/prune that object whilst still active and so
|
|
* we keep the previous context pinned until the following (this)
|
|
* request is retired.
|
|
*/
|
|
struct i915_gem_context *previous_context;
|
|
|
|
/** Batch buffer related to this request if any (used for
|
|
error state dump only) */
|
|
struct drm_i915_gem_object *batch_obj;
|
|
|
|
/** Time at which this request was emitted, in jiffies. */
|
|
unsigned long emitted_jiffies;
|
|
|
|
/** global list entry for this request */
|
|
struct list_head list;
|
|
|
|
struct drm_i915_file_private *file_priv;
|
|
/** file_priv list entry for this request */
|
|
struct list_head client_list;
|
|
|
|
/** process identifier submitting this request */
|
|
struct pid *pid;
|
|
|
|
/**
|
|
* The ELSP only accepts two elements at a time, so we queue
|
|
* context/tail pairs on a given queue (ring->execlist_queue) until the
|
|
* hardware is available. The queue serves a double purpose: we also use
|
|
* it to keep track of the up to 2 contexts currently in the hardware
|
|
* (usually one in execution and the other queued up by the GPU): We
|
|
* only remove elements from the head of the queue when the hardware
|
|
* informs us that an element has been completed.
|
|
*
|
|
* All accesses to the queue are mediated by a spinlock
|
|
* (ring->execlist_lock).
|
|
*/
|
|
|
|
/** Execlist link in the submission queue.*/
|
|
struct list_head execlist_link;
|
|
|
|
/** Execlists no. of times this request has been sent to the ELSP */
|
|
int elsp_submitted;
|
|
|
|
/** Execlists context hardware id. */
|
|
unsigned ctx_hw_id;
|
|
};
|
|
|
|
struct drm_i915_gem_request * __must_check
|
|
i915_gem_request_alloc(struct intel_engine_cs *engine,
|
|
struct i915_gem_context *ctx);
|
|
void i915_gem_request_free(struct kref *req_ref);
|
|
int i915_gem_request_add_to_client(struct drm_i915_gem_request *req,
|
|
struct drm_file *file);
|
|
|
|
static inline uint32_t
|
|
i915_gem_request_get_seqno(struct drm_i915_gem_request *req)
|
|
{
|
|
return req ? req->seqno : 0;
|
|
}
|
|
|
|
static inline struct intel_engine_cs *
|
|
i915_gem_request_get_engine(struct drm_i915_gem_request *req)
|
|
{
|
|
return req ? req->engine : NULL;
|
|
}
|
|
|
|
static inline struct drm_i915_gem_request *
|
|
i915_gem_request_reference(struct drm_i915_gem_request *req)
|
|
{
|
|
if (req)
|
|
kref_get(&req->ref);
|
|
return req;
|
|
}
|
|
|
|
static inline void
|
|
i915_gem_request_unreference(struct drm_i915_gem_request *req)
|
|
{
|
|
kref_put(&req->ref, i915_gem_request_free);
|
|
}
|
|
|
|
static inline void i915_gem_request_assign(struct drm_i915_gem_request **pdst,
|
|
struct drm_i915_gem_request *src)
|
|
{
|
|
if (src)
|
|
i915_gem_request_reference(src);
|
|
|
|
if (*pdst)
|
|
i915_gem_request_unreference(*pdst);
|
|
|
|
*pdst = src;
|
|
}
|
|
|
|
/*
|
|
* XXX: i915_gem_request_completed should be here but currently needs the
|
|
* definition of i915_seqno_passed() which is below. It will be moved in
|
|
* a later patch when the call to i915_seqno_passed() is obsoleted...
|
|
*/
|
|
|
|
/*
|
|
* A command that requires special handling by the command parser.
|
|
*/
|
|
struct drm_i915_cmd_descriptor {
|
|
/*
|
|
* Flags describing how the command parser processes the command.
|
|
*
|
|
* CMD_DESC_FIXED: The command has a fixed length if this is set,
|
|
* a length mask if not set
|
|
* CMD_DESC_SKIP: The command is allowed but does not follow the
|
|
* standard length encoding for the opcode range in
|
|
* which it falls
|
|
* CMD_DESC_REJECT: The command is never allowed
|
|
* CMD_DESC_REGISTER: The command should be checked against the
|
|
* register whitelist for the appropriate ring
|
|
* CMD_DESC_MASTER: The command is allowed if the submitting process
|
|
* is the DRM master
|
|
*/
|
|
u32 flags;
|
|
#define CMD_DESC_FIXED (1<<0)
|
|
#define CMD_DESC_SKIP (1<<1)
|
|
#define CMD_DESC_REJECT (1<<2)
|
|
#define CMD_DESC_REGISTER (1<<3)
|
|
#define CMD_DESC_BITMASK (1<<4)
|
|
#define CMD_DESC_MASTER (1<<5)
|
|
|
|
/*
|
|
* The command's unique identification bits and the bitmask to get them.
|
|
* This isn't strictly the opcode field as defined in the spec and may
|
|
* also include type, subtype, and/or subop fields.
|
|
*/
|
|
struct {
|
|
u32 value;
|
|
u32 mask;
|
|
} cmd;
|
|
|
|
/*
|
|
* The command's length. The command is either fixed length (i.e. does
|
|
* not include a length field) or has a length field mask. The flag
|
|
* CMD_DESC_FIXED indicates a fixed length. Otherwise, the command has
|
|
* a length mask. All command entries in a command table must include
|
|
* length information.
|
|
*/
|
|
union {
|
|
u32 fixed;
|
|
u32 mask;
|
|
} length;
|
|
|
|
/*
|
|
* Describes where to find a register address in the command to check
|
|
* against the ring's register whitelist. Only valid if flags has the
|
|
* CMD_DESC_REGISTER bit set.
|
|
*
|
|
* A non-zero step value implies that the command may access multiple
|
|
* registers in sequence (e.g. LRI), in that case step gives the
|
|
* distance in dwords between individual offset fields.
|
|
*/
|
|
struct {
|
|
u32 offset;
|
|
u32 mask;
|
|
u32 step;
|
|
} reg;
|
|
|
|
#define MAX_CMD_DESC_BITMASKS 3
|
|
/*
|
|
* Describes command checks where a particular dword is masked and
|
|
* compared against an expected value. If the command does not match
|
|
* the expected value, the parser rejects it. Only valid if flags has
|
|
* the CMD_DESC_BITMASK bit set. Only entries where mask is non-zero
|
|
* are valid.
|
|
*
|
|
* If the check specifies a non-zero condition_mask then the parser
|
|
* only performs the check when the bits specified by condition_mask
|
|
* are non-zero.
|
|
*/
|
|
struct {
|
|
u32 offset;
|
|
u32 mask;
|
|
u32 expected;
|
|
u32 condition_offset;
|
|
u32 condition_mask;
|
|
} bits[MAX_CMD_DESC_BITMASKS];
|
|
};
|
|
|
|
/*
|
|
* A table of commands requiring special handling by the command parser.
|
|
*
|
|
* Each ring has an array of tables. Each table consists of an array of command
|
|
* descriptors, which must be sorted with command opcodes in ascending order.
|
|
*/
|
|
struct drm_i915_cmd_table {
|
|
const struct drm_i915_cmd_descriptor *table;
|
|
int count;
|
|
};
|
|
|
|
/* Note that the (struct drm_i915_private *) cast is just to shut up gcc. */
|
|
#define __I915__(p) ({ \
|
|
struct drm_i915_private *__p; \
|
|
if (__builtin_types_compatible_p(typeof(*p), struct drm_i915_private)) \
|
|
__p = (struct drm_i915_private *)p; \
|
|
else if (__builtin_types_compatible_p(typeof(*p), struct drm_device)) \
|
|
__p = to_i915((struct drm_device *)p); \
|
|
else \
|
|
BUILD_BUG(); \
|
|
__p; \
|
|
})
|
|
#define INTEL_INFO(p) (&__I915__(p)->info)
|
|
#define INTEL_GEN(p) (INTEL_INFO(p)->gen)
|
|
#define INTEL_DEVID(p) (INTEL_INFO(p)->device_id)
|
|
|
|
#define REVID_FOREVER 0xff
|
|
#define INTEL_REVID(p) (__I915__(p)->drm.pdev->revision)
|
|
|
|
#define GEN_FOREVER (0)
|
|
/*
|
|
* Returns true if Gen is in inclusive range [Start, End].
|
|
*
|
|
* Use GEN_FOREVER for unbound start and or end.
|
|
*/
|
|
#define IS_GEN(p, s, e) ({ \
|
|
unsigned int __s = (s), __e = (e); \
|
|
BUILD_BUG_ON(!__builtin_constant_p(s)); \
|
|
BUILD_BUG_ON(!__builtin_constant_p(e)); \
|
|
if ((__s) != GEN_FOREVER) \
|
|
__s = (s) - 1; \
|
|
if ((__e) == GEN_FOREVER) \
|
|
__e = BITS_PER_LONG - 1; \
|
|
else \
|
|
__e = (e) - 1; \
|
|
!!(INTEL_INFO(p)->gen_mask & GENMASK((__e), (__s))); \
|
|
})
|
|
|
|
/*
|
|
* Return true if revision is in range [since,until] inclusive.
|
|
*
|
|
* Use 0 for open-ended since, and REVID_FOREVER for open-ended until.
|
|
*/
|
|
#define IS_REVID(p, since, until) \
|
|
(INTEL_REVID(p) >= (since) && INTEL_REVID(p) <= (until))
|
|
|
|
#define IS_I830(dev) (INTEL_DEVID(dev) == 0x3577)
|
|
#define IS_845G(dev) (INTEL_DEVID(dev) == 0x2562)
|
|
#define IS_I85X(dev) (INTEL_INFO(dev)->is_i85x)
|
|
#define IS_I865G(dev) (INTEL_DEVID(dev) == 0x2572)
|
|
#define IS_I915G(dev) (INTEL_INFO(dev)->is_i915g)
|
|
#define IS_I915GM(dev) (INTEL_DEVID(dev) == 0x2592)
|
|
#define IS_I945G(dev) (INTEL_DEVID(dev) == 0x2772)
|
|
#define IS_I945GM(dev) (INTEL_INFO(dev)->is_i945gm)
|
|
#define IS_BROADWATER(dev) (INTEL_INFO(dev)->is_broadwater)
|
|
#define IS_CRESTLINE(dev) (INTEL_INFO(dev)->is_crestline)
|
|
#define IS_GM45(dev) (INTEL_DEVID(dev) == 0x2A42)
|
|
#define IS_G4X(dev) (INTEL_INFO(dev)->is_g4x)
|
|
#define IS_PINEVIEW_G(dev) (INTEL_DEVID(dev) == 0xa001)
|
|
#define IS_PINEVIEW_M(dev) (INTEL_DEVID(dev) == 0xa011)
|
|
#define IS_PINEVIEW(dev) (INTEL_INFO(dev)->is_pineview)
|
|
#define IS_G33(dev) (INTEL_INFO(dev)->is_g33)
|
|
#define IS_IRONLAKE_M(dev) (INTEL_DEVID(dev) == 0x0046)
|
|
#define IS_IVYBRIDGE(dev) (INTEL_INFO(dev)->is_ivybridge)
|
|
#define IS_IVB_GT1(dev) (INTEL_DEVID(dev) == 0x0156 || \
|
|
INTEL_DEVID(dev) == 0x0152 || \
|
|
INTEL_DEVID(dev) == 0x015a)
|
|
#define IS_VALLEYVIEW(dev) (INTEL_INFO(dev)->is_valleyview)
|
|
#define IS_CHERRYVIEW(dev) (INTEL_INFO(dev)->is_cherryview)
|
|
#define IS_HASWELL(dev) (INTEL_INFO(dev)->is_haswell)
|
|
#define IS_BROADWELL(dev) (INTEL_INFO(dev)->is_broadwell)
|
|
#define IS_SKYLAKE(dev) (INTEL_INFO(dev)->is_skylake)
|
|
#define IS_BROXTON(dev) (INTEL_INFO(dev)->is_broxton)
|
|
#define IS_KABYLAKE(dev) (INTEL_INFO(dev)->is_kabylake)
|
|
#define IS_MOBILE(dev) (INTEL_INFO(dev)->is_mobile)
|
|
#define IS_HSW_EARLY_SDV(dev) (IS_HASWELL(dev) && \
|
|
(INTEL_DEVID(dev) & 0xFF00) == 0x0C00)
|
|
#define IS_BDW_ULT(dev) (IS_BROADWELL(dev) && \
|
|
((INTEL_DEVID(dev) & 0xf) == 0x6 || \
|
|
(INTEL_DEVID(dev) & 0xf) == 0xb || \
|
|
(INTEL_DEVID(dev) & 0xf) == 0xe))
|
|
/* ULX machines are also considered ULT. */
|
|
#define IS_BDW_ULX(dev) (IS_BROADWELL(dev) && \
|
|
(INTEL_DEVID(dev) & 0xf) == 0xe)
|
|
#define IS_BDW_GT3(dev) (IS_BROADWELL(dev) && \
|
|
(INTEL_DEVID(dev) & 0x00F0) == 0x0020)
|
|
#define IS_HSW_ULT(dev) (IS_HASWELL(dev) && \
|
|
(INTEL_DEVID(dev) & 0xFF00) == 0x0A00)
|
|
#define IS_HSW_GT3(dev) (IS_HASWELL(dev) && \
|
|
(INTEL_DEVID(dev) & 0x00F0) == 0x0020)
|
|
/* ULX machines are also considered ULT. */
|
|
#define IS_HSW_ULX(dev) (INTEL_DEVID(dev) == 0x0A0E || \
|
|
INTEL_DEVID(dev) == 0x0A1E)
|
|
#define IS_SKL_ULT(dev) (INTEL_DEVID(dev) == 0x1906 || \
|
|
INTEL_DEVID(dev) == 0x1913 || \
|
|
INTEL_DEVID(dev) == 0x1916 || \
|
|
INTEL_DEVID(dev) == 0x1921 || \
|
|
INTEL_DEVID(dev) == 0x1926)
|
|
#define IS_SKL_ULX(dev) (INTEL_DEVID(dev) == 0x190E || \
|
|
INTEL_DEVID(dev) == 0x1915 || \
|
|
INTEL_DEVID(dev) == 0x191E)
|
|
#define IS_KBL_ULT(dev) (INTEL_DEVID(dev) == 0x5906 || \
|
|
INTEL_DEVID(dev) == 0x5913 || \
|
|
INTEL_DEVID(dev) == 0x5916 || \
|
|
INTEL_DEVID(dev) == 0x5921 || \
|
|
INTEL_DEVID(dev) == 0x5926)
|
|
#define IS_KBL_ULX(dev) (INTEL_DEVID(dev) == 0x590E || \
|
|
INTEL_DEVID(dev) == 0x5915 || \
|
|
INTEL_DEVID(dev) == 0x591E)
|
|
#define IS_SKL_GT3(dev) (IS_SKYLAKE(dev) && \
|
|
(INTEL_DEVID(dev) & 0x00F0) == 0x0020)
|
|
#define IS_SKL_GT4(dev) (IS_SKYLAKE(dev) && \
|
|
(INTEL_DEVID(dev) & 0x00F0) == 0x0030)
|
|
|
|
#define IS_PRELIMINARY_HW(intel_info) ((intel_info)->is_preliminary)
|
|
|
|
#define SKL_REVID_A0 0x0
|
|
#define SKL_REVID_B0 0x1
|
|
#define SKL_REVID_C0 0x2
|
|
#define SKL_REVID_D0 0x3
|
|
#define SKL_REVID_E0 0x4
|
|
#define SKL_REVID_F0 0x5
|
|
#define SKL_REVID_G0 0x6
|
|
#define SKL_REVID_H0 0x7
|
|
|
|
#define IS_SKL_REVID(p, since, until) (IS_SKYLAKE(p) && IS_REVID(p, since, until))
|
|
|
|
#define BXT_REVID_A0 0x0
|
|
#define BXT_REVID_A1 0x1
|
|
#define BXT_REVID_B0 0x3
|
|
#define BXT_REVID_C0 0x9
|
|
|
|
#define IS_BXT_REVID(p, since, until) (IS_BROXTON(p) && IS_REVID(p, since, until))
|
|
|
|
#define KBL_REVID_A0 0x0
|
|
#define KBL_REVID_B0 0x1
|
|
#define KBL_REVID_C0 0x2
|
|
#define KBL_REVID_D0 0x3
|
|
#define KBL_REVID_E0 0x4
|
|
|
|
#define IS_KBL_REVID(p, since, until) \
|
|
(IS_KABYLAKE(p) && IS_REVID(p, since, until))
|
|
|
|
/*
|
|
* The genX designation typically refers to the render engine, so render
|
|
* capability related checks should use IS_GEN, while display and other checks
|
|
* have their own (e.g. HAS_PCH_SPLIT for ILK+ display, IS_foo for particular
|
|
* chips, etc.).
|
|
*/
|
|
#define IS_GEN2(dev) (!!(INTEL_INFO(dev)->gen_mask & BIT(1)))
|
|
#define IS_GEN3(dev) (!!(INTEL_INFO(dev)->gen_mask & BIT(2)))
|
|
#define IS_GEN4(dev) (!!(INTEL_INFO(dev)->gen_mask & BIT(3)))
|
|
#define IS_GEN5(dev) (!!(INTEL_INFO(dev)->gen_mask & BIT(4)))
|
|
#define IS_GEN6(dev) (!!(INTEL_INFO(dev)->gen_mask & BIT(5)))
|
|
#define IS_GEN7(dev) (!!(INTEL_INFO(dev)->gen_mask & BIT(6)))
|
|
#define IS_GEN8(dev) (!!(INTEL_INFO(dev)->gen_mask & BIT(7)))
|
|
#define IS_GEN9(dev) (!!(INTEL_INFO(dev)->gen_mask & BIT(8)))
|
|
|
|
#define ENGINE_MASK(id) BIT(id)
|
|
#define RENDER_RING ENGINE_MASK(RCS)
|
|
#define BSD_RING ENGINE_MASK(VCS)
|
|
#define BLT_RING ENGINE_MASK(BCS)
|
|
#define VEBOX_RING ENGINE_MASK(VECS)
|
|
#define BSD2_RING ENGINE_MASK(VCS2)
|
|
#define ALL_ENGINES (~0)
|
|
|
|
#define HAS_ENGINE(dev_priv, id) \
|
|
(!!(INTEL_INFO(dev_priv)->ring_mask & ENGINE_MASK(id)))
|
|
|
|
#define HAS_BSD(dev_priv) HAS_ENGINE(dev_priv, VCS)
|
|
#define HAS_BSD2(dev_priv) HAS_ENGINE(dev_priv, VCS2)
|
|
#define HAS_BLT(dev_priv) HAS_ENGINE(dev_priv, BCS)
|
|
#define HAS_VEBOX(dev_priv) HAS_ENGINE(dev_priv, VECS)
|
|
|
|
#define HAS_LLC(dev) (INTEL_INFO(dev)->has_llc)
|
|
#define HAS_SNOOP(dev) (INTEL_INFO(dev)->has_snoop)
|
|
#define HAS_EDRAM(dev) (!!(__I915__(dev)->edram_cap & EDRAM_ENABLED))
|
|
#define HAS_WT(dev) ((IS_HASWELL(dev) || IS_BROADWELL(dev)) && \
|
|
HAS_EDRAM(dev))
|
|
#define I915_NEED_GFX_HWS(dev) (INTEL_INFO(dev)->need_gfx_hws)
|
|
|
|
#define HAS_HW_CONTEXTS(dev) (INTEL_INFO(dev)->gen >= 6)
|
|
#define HAS_LOGICAL_RING_CONTEXTS(dev) (INTEL_INFO(dev)->gen >= 8)
|
|
#define USES_PPGTT(dev) (i915.enable_ppgtt)
|
|
#define USES_FULL_PPGTT(dev) (i915.enable_ppgtt >= 2)
|
|
#define USES_FULL_48BIT_PPGTT(dev) (i915.enable_ppgtt == 3)
|
|
|
|
#define HAS_OVERLAY(dev) (INTEL_INFO(dev)->has_overlay)
|
|
#define OVERLAY_NEEDS_PHYSICAL(dev) (INTEL_INFO(dev)->overlay_needs_physical)
|
|
|
|
/* Early gen2 have a totally busted CS tlb and require pinned batches. */
|
|
#define HAS_BROKEN_CS_TLB(dev) (IS_I830(dev) || IS_845G(dev))
|
|
|
|
/* WaRsDisableCoarsePowerGating:skl,bxt */
|
|
#define NEEDS_WaRsDisableCoarsePowerGating(dev_priv) \
|
|
(IS_BXT_REVID(dev_priv, 0, BXT_REVID_A1) || \
|
|
IS_SKL_GT3(dev_priv) || \
|
|
IS_SKL_GT4(dev_priv))
|
|
|
|
/*
|
|
* dp aux and gmbus irq on gen4 seems to be able to generate legacy interrupts
|
|
* even when in MSI mode. This results in spurious interrupt warnings if the
|
|
* legacy irq no. is shared with another device. The kernel then disables that
|
|
* interrupt source and so prevents the other device from working properly.
|
|
*/
|
|
#define HAS_AUX_IRQ(dev) (INTEL_INFO(dev)->gen >= 5)
|
|
#define HAS_GMBUS_IRQ(dev) (INTEL_INFO(dev)->gen >= 5)
|
|
|
|
/* With the 945 and later, Y tiling got adjusted so that it was 32 128-byte
|
|
* rows, which changed the alignment requirements and fence programming.
|
|
*/
|
|
#define HAS_128_BYTE_Y_TILING(dev) (!IS_GEN2(dev) && !(IS_I915G(dev) || \
|
|
IS_I915GM(dev)))
|
|
#define SUPPORTS_TV(dev) (INTEL_INFO(dev)->supports_tv)
|
|
#define I915_HAS_HOTPLUG(dev) (INTEL_INFO(dev)->has_hotplug)
|
|
|
|
#define HAS_FW_BLC(dev) (INTEL_INFO(dev)->gen > 2)
|
|
#define HAS_PIPE_CXSR(dev) (INTEL_INFO(dev)->has_pipe_cxsr)
|
|
#define HAS_FBC(dev) (INTEL_INFO(dev)->has_fbc)
|
|
|
|
#define HAS_IPS(dev) (IS_HSW_ULT(dev) || IS_BROADWELL(dev))
|
|
|
|
#define HAS_DP_MST(dev) (IS_HASWELL(dev) || IS_BROADWELL(dev) || \
|
|
INTEL_INFO(dev)->gen >= 9)
|
|
|
|
#define HAS_DDI(dev) (INTEL_INFO(dev)->has_ddi)
|
|
#define HAS_FPGA_DBG_UNCLAIMED(dev) (INTEL_INFO(dev)->has_fpga_dbg)
|
|
#define HAS_PSR(dev) (IS_HASWELL(dev) || IS_BROADWELL(dev) || \
|
|
IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev) || \
|
|
IS_SKYLAKE(dev) || IS_KABYLAKE(dev))
|
|
#define HAS_RUNTIME_PM(dev) (IS_GEN6(dev) || IS_HASWELL(dev) || \
|
|
IS_BROADWELL(dev) || IS_VALLEYVIEW(dev) || \
|
|
IS_CHERRYVIEW(dev) || IS_SKYLAKE(dev) || \
|
|
IS_KABYLAKE(dev) || IS_BROXTON(dev))
|
|
#define HAS_RC6(dev) (INTEL_INFO(dev)->gen >= 6)
|
|
#define HAS_RC6p(dev) (IS_GEN6(dev) || IS_IVYBRIDGE(dev))
|
|
|
|
#define HAS_CSR(dev) (IS_GEN9(dev))
|
|
|
|
/*
|
|
* For now, anything with a GuC requires uCode loading, and then supports
|
|
* command submission once loaded. But these are logically independent
|
|
* properties, so we have separate macros to test them.
|
|
*/
|
|
#define HAS_GUC(dev) (IS_GEN9(dev))
|
|
#define HAS_GUC_UCODE(dev) (HAS_GUC(dev))
|
|
#define HAS_GUC_SCHED(dev) (HAS_GUC(dev))
|
|
|
|
#define HAS_RESOURCE_STREAMER(dev) (IS_HASWELL(dev) || \
|
|
INTEL_INFO(dev)->gen >= 8)
|
|
|
|
#define HAS_CORE_RING_FREQ(dev) (INTEL_INFO(dev)->gen >= 6 && \
|
|
!IS_VALLEYVIEW(dev) && !IS_CHERRYVIEW(dev) && \
|
|
!IS_BROXTON(dev))
|
|
|
|
#define HAS_POOLED_EU(dev) (INTEL_INFO(dev)->has_pooled_eu)
|
|
|
|
#define INTEL_PCH_DEVICE_ID_MASK 0xff00
|
|
#define INTEL_PCH_IBX_DEVICE_ID_TYPE 0x3b00
|
|
#define INTEL_PCH_CPT_DEVICE_ID_TYPE 0x1c00
|
|
#define INTEL_PCH_PPT_DEVICE_ID_TYPE 0x1e00
|
|
#define INTEL_PCH_LPT_DEVICE_ID_TYPE 0x8c00
|
|
#define INTEL_PCH_LPT_LP_DEVICE_ID_TYPE 0x9c00
|
|
#define INTEL_PCH_SPT_DEVICE_ID_TYPE 0xA100
|
|
#define INTEL_PCH_SPT_LP_DEVICE_ID_TYPE 0x9D00
|
|
#define INTEL_PCH_KBP_DEVICE_ID_TYPE 0xA200
|
|
#define INTEL_PCH_P2X_DEVICE_ID_TYPE 0x7100
|
|
#define INTEL_PCH_P3X_DEVICE_ID_TYPE 0x7000
|
|
#define INTEL_PCH_QEMU_DEVICE_ID_TYPE 0x2900 /* qemu q35 has 2918 */
|
|
|
|
#define INTEL_PCH_TYPE(dev) (__I915__(dev)->pch_type)
|
|
#define HAS_PCH_KBP(dev) (INTEL_PCH_TYPE(dev) == PCH_KBP)
|
|
#define HAS_PCH_SPT(dev) (INTEL_PCH_TYPE(dev) == PCH_SPT)
|
|
#define HAS_PCH_LPT(dev) (INTEL_PCH_TYPE(dev) == PCH_LPT)
|
|
#define HAS_PCH_LPT_LP(dev) (__I915__(dev)->pch_id == INTEL_PCH_LPT_LP_DEVICE_ID_TYPE)
|
|
#define HAS_PCH_LPT_H(dev) (__I915__(dev)->pch_id == INTEL_PCH_LPT_DEVICE_ID_TYPE)
|
|
#define HAS_PCH_CPT(dev) (INTEL_PCH_TYPE(dev) == PCH_CPT)
|
|
#define HAS_PCH_IBX(dev) (INTEL_PCH_TYPE(dev) == PCH_IBX)
|
|
#define HAS_PCH_NOP(dev) (INTEL_PCH_TYPE(dev) == PCH_NOP)
|
|
#define HAS_PCH_SPLIT(dev) (INTEL_PCH_TYPE(dev) != PCH_NONE)
|
|
|
|
#define HAS_GMCH_DISPLAY(dev) (INTEL_INFO(dev)->gen < 5 || \
|
|
IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
|
|
|
|
/* DPF == dynamic parity feature */
|
|
#define HAS_L3_DPF(dev) (IS_IVYBRIDGE(dev) || IS_HASWELL(dev))
|
|
#define NUM_L3_SLICES(dev) (IS_HSW_GT3(dev) ? 2 : HAS_L3_DPF(dev))
|
|
|
|
#define GT_FREQUENCY_MULTIPLIER 50
|
|
#define GEN9_FREQ_SCALER 3
|
|
|
|
#include "i915_trace.h"
|
|
|
|
static inline bool intel_scanout_needs_vtd_wa(struct drm_i915_private *dev_priv)
|
|
{
|
|
#ifdef CONFIG_INTEL_IOMMU
|
|
if (INTEL_GEN(dev_priv) >= 6 && intel_iommu_gfx_mapped)
|
|
return true;
|
|
#endif
|
|
return false;
|
|
}
|
|
|
|
extern int i915_suspend_switcheroo(struct drm_device *dev, pm_message_t state);
|
|
extern int i915_resume_switcheroo(struct drm_device *dev);
|
|
|
|
int intel_sanitize_enable_ppgtt(struct drm_i915_private *dev_priv,
|
|
int enable_ppgtt);
|
|
|
|
/* i915_drv.c */
|
|
void __printf(3, 4)
|
|
__i915_printk(struct drm_i915_private *dev_priv, const char *level,
|
|
const char *fmt, ...);
|
|
|
|
#define i915_report_error(dev_priv, fmt, ...) \
|
|
__i915_printk(dev_priv, KERN_ERR, fmt, ##__VA_ARGS__)
|
|
|
|
#ifdef CONFIG_COMPAT
|
|
extern long i915_compat_ioctl(struct file *filp, unsigned int cmd,
|
|
unsigned long arg);
|
|
#endif
|
|
extern int intel_gpu_reset(struct drm_i915_private *dev_priv, u32 engine_mask);
|
|
extern bool intel_has_gpu_reset(struct drm_i915_private *dev_priv);
|
|
extern int i915_reset(struct drm_i915_private *dev_priv);
|
|
extern int intel_guc_reset(struct drm_i915_private *dev_priv);
|
|
extern void intel_engine_init_hangcheck(struct intel_engine_cs *engine);
|
|
extern unsigned long i915_chipset_val(struct drm_i915_private *dev_priv);
|
|
extern unsigned long i915_mch_val(struct drm_i915_private *dev_priv);
|
|
extern unsigned long i915_gfx_val(struct drm_i915_private *dev_priv);
|
|
extern void i915_update_gfx_val(struct drm_i915_private *dev_priv);
|
|
int vlv_force_gfx_clock(struct drm_i915_private *dev_priv, bool on);
|
|
|
|
/* intel_hotplug.c */
|
|
void intel_hpd_irq_handler(struct drm_i915_private *dev_priv,
|
|
u32 pin_mask, u32 long_mask);
|
|
void intel_hpd_init(struct drm_i915_private *dev_priv);
|
|
void intel_hpd_init_work(struct drm_i915_private *dev_priv);
|
|
void intel_hpd_cancel_work(struct drm_i915_private *dev_priv);
|
|
bool intel_hpd_pin_to_port(enum hpd_pin pin, enum port *port);
|
|
bool intel_hpd_disable(struct drm_i915_private *dev_priv, enum hpd_pin pin);
|
|
void intel_hpd_enable(struct drm_i915_private *dev_priv, enum hpd_pin pin);
|
|
|
|
/* i915_irq.c */
|
|
static inline void i915_queue_hangcheck(struct drm_i915_private *dev_priv)
|
|
{
|
|
unsigned long delay;
|
|
|
|
if (unlikely(!i915.enable_hangcheck))
|
|
return;
|
|
|
|
/* Don't continually defer the hangcheck so that it is always run at
|
|
* least once after work has been scheduled on any ring. Otherwise,
|
|
* we will ignore a hung ring if a second ring is kept busy.
|
|
*/
|
|
|
|
delay = round_jiffies_up_relative(DRM_I915_HANGCHECK_JIFFIES);
|
|
queue_delayed_work(system_long_wq,
|
|
&dev_priv->gpu_error.hangcheck_work, delay);
|
|
}
|
|
|
|
__printf(3, 4)
|
|
void i915_handle_error(struct drm_i915_private *dev_priv,
|
|
u32 engine_mask,
|
|
const char *fmt, ...);
|
|
|
|
extern void intel_irq_init(struct drm_i915_private *dev_priv);
|
|
int intel_irq_install(struct drm_i915_private *dev_priv);
|
|
void intel_irq_uninstall(struct drm_i915_private *dev_priv);
|
|
|
|
extern void intel_uncore_sanitize(struct drm_i915_private *dev_priv);
|
|
extern void intel_uncore_early_sanitize(struct drm_i915_private *dev_priv,
|
|
bool restore_forcewake);
|
|
extern void intel_uncore_init(struct drm_i915_private *dev_priv);
|
|
extern bool intel_uncore_unclaimed_mmio(struct drm_i915_private *dev_priv);
|
|
extern bool intel_uncore_arm_unclaimed_mmio_detection(struct drm_i915_private *dev_priv);
|
|
extern void intel_uncore_fini(struct drm_i915_private *dev_priv);
|
|
extern void intel_uncore_forcewake_reset(struct drm_i915_private *dev_priv,
|
|
bool restore);
|
|
const char *intel_uncore_forcewake_domain_to_str(const enum forcewake_domain_id id);
|
|
void intel_uncore_forcewake_get(struct drm_i915_private *dev_priv,
|
|
enum forcewake_domains domains);
|
|
void intel_uncore_forcewake_put(struct drm_i915_private *dev_priv,
|
|
enum forcewake_domains domains);
|
|
/* Like above but the caller must manage the uncore.lock itself.
|
|
* Must be used with I915_READ_FW and friends.
|
|
*/
|
|
void intel_uncore_forcewake_get__locked(struct drm_i915_private *dev_priv,
|
|
enum forcewake_domains domains);
|
|
void intel_uncore_forcewake_put__locked(struct drm_i915_private *dev_priv,
|
|
enum forcewake_domains domains);
|
|
u64 intel_uncore_edram_size(struct drm_i915_private *dev_priv);
|
|
|
|
void assert_forcewakes_inactive(struct drm_i915_private *dev_priv);
|
|
|
|
int intel_wait_for_register(struct drm_i915_private *dev_priv,
|
|
i915_reg_t reg,
|
|
const u32 mask,
|
|
const u32 value,
|
|
const unsigned long timeout_ms);
|
|
int intel_wait_for_register_fw(struct drm_i915_private *dev_priv,
|
|
i915_reg_t reg,
|
|
const u32 mask,
|
|
const u32 value,
|
|
const unsigned long timeout_ms);
|
|
|
|
static inline bool intel_gvt_active(struct drm_i915_private *dev_priv)
|
|
{
|
|
return dev_priv->gvt.initialized;
|
|
}
|
|
|
|
static inline bool intel_vgpu_active(struct drm_i915_private *dev_priv)
|
|
{
|
|
return dev_priv->vgpu.active;
|
|
}
|
|
|
|
void
|
|
i915_enable_pipestat(struct drm_i915_private *dev_priv, enum pipe pipe,
|
|
u32 status_mask);
|
|
|
|
void
|
|
i915_disable_pipestat(struct drm_i915_private *dev_priv, enum pipe pipe,
|
|
u32 status_mask);
|
|
|
|
void valleyview_enable_display_irqs(struct drm_i915_private *dev_priv);
|
|
void valleyview_disable_display_irqs(struct drm_i915_private *dev_priv);
|
|
void i915_hotplug_interrupt_update(struct drm_i915_private *dev_priv,
|
|
uint32_t mask,
|
|
uint32_t bits);
|
|
void ilk_update_display_irq(struct drm_i915_private *dev_priv,
|
|
uint32_t interrupt_mask,
|
|
uint32_t enabled_irq_mask);
|
|
static inline void
|
|
ilk_enable_display_irq(struct drm_i915_private *dev_priv, uint32_t bits)
|
|
{
|
|
ilk_update_display_irq(dev_priv, bits, bits);
|
|
}
|
|
static inline void
|
|
ilk_disable_display_irq(struct drm_i915_private *dev_priv, uint32_t bits)
|
|
{
|
|
ilk_update_display_irq(dev_priv, bits, 0);
|
|
}
|
|
void bdw_update_pipe_irq(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe,
|
|
uint32_t interrupt_mask,
|
|
uint32_t enabled_irq_mask);
|
|
static inline void bdw_enable_pipe_irq(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe, uint32_t bits)
|
|
{
|
|
bdw_update_pipe_irq(dev_priv, pipe, bits, bits);
|
|
}
|
|
static inline void bdw_disable_pipe_irq(struct drm_i915_private *dev_priv,
|
|
enum pipe pipe, uint32_t bits)
|
|
{
|
|
bdw_update_pipe_irq(dev_priv, pipe, bits, 0);
|
|
}
|
|
void ibx_display_interrupt_update(struct drm_i915_private *dev_priv,
|
|
uint32_t interrupt_mask,
|
|
uint32_t enabled_irq_mask);
|
|
static inline void
|
|
ibx_enable_display_interrupt(struct drm_i915_private *dev_priv, uint32_t bits)
|
|
{
|
|
ibx_display_interrupt_update(dev_priv, bits, bits);
|
|
}
|
|
static inline void
|
|
ibx_disable_display_interrupt(struct drm_i915_private *dev_priv, uint32_t bits)
|
|
{
|
|
ibx_display_interrupt_update(dev_priv, bits, 0);
|
|
}
|
|
|
|
/* i915_gem.c */
|
|
int i915_gem_create_ioctl(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv);
|
|
int i915_gem_pread_ioctl(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv);
|
|
int i915_gem_pwrite_ioctl(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv);
|
|
int i915_gem_mmap_ioctl(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv);
|
|
int i915_gem_mmap_gtt_ioctl(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv);
|
|
int i915_gem_set_domain_ioctl(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv);
|
|
int i915_gem_sw_finish_ioctl(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv);
|
|
void i915_gem_execbuffer_move_to_active(struct list_head *vmas,
|
|
struct drm_i915_gem_request *req);
|
|
int i915_gem_ringbuffer_submission(struct i915_execbuffer_params *params,
|
|
struct drm_i915_gem_execbuffer2 *args,
|
|
struct list_head *vmas);
|
|
int i915_gem_execbuffer(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv);
|
|
int i915_gem_execbuffer2(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv);
|
|
int i915_gem_busy_ioctl(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv);
|
|
int i915_gem_get_caching_ioctl(struct drm_device *dev, void *data,
|
|
struct drm_file *file);
|
|
int i915_gem_set_caching_ioctl(struct drm_device *dev, void *data,
|
|
struct drm_file *file);
|
|
int i915_gem_throttle_ioctl(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv);
|
|
int i915_gem_madvise_ioctl(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv);
|
|
int i915_gem_set_tiling(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv);
|
|
int i915_gem_get_tiling(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv);
|
|
void i915_gem_init_userptr(struct drm_i915_private *dev_priv);
|
|
int i915_gem_userptr_ioctl(struct drm_device *dev, void *data,
|
|
struct drm_file *file);
|
|
int i915_gem_get_aperture_ioctl(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv);
|
|
int i915_gem_wait_ioctl(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv);
|
|
void i915_gem_load_init(struct drm_device *dev);
|
|
void i915_gem_load_cleanup(struct drm_device *dev);
|
|
void i915_gem_load_init_fences(struct drm_i915_private *dev_priv);
|
|
int i915_gem_freeze_late(struct drm_i915_private *dev_priv);
|
|
|
|
void *i915_gem_object_alloc(struct drm_device *dev);
|
|
void i915_gem_object_free(struct drm_i915_gem_object *obj);
|
|
void i915_gem_object_init(struct drm_i915_gem_object *obj,
|
|
const struct drm_i915_gem_object_ops *ops);
|
|
struct drm_i915_gem_object *i915_gem_object_create(struct drm_device *dev,
|
|
size_t size);
|
|
struct drm_i915_gem_object *i915_gem_object_create_from_data(
|
|
struct drm_device *dev, const void *data, size_t size);
|
|
void i915_gem_free_object(struct drm_gem_object *obj);
|
|
void i915_gem_vma_destroy(struct i915_vma *vma);
|
|
|
|
/* Flags used by pin/bind&friends. */
|
|
#define PIN_MAPPABLE (1<<0)
|
|
#define PIN_NONBLOCK (1<<1)
|
|
#define PIN_GLOBAL (1<<2)
|
|
#define PIN_OFFSET_BIAS (1<<3)
|
|
#define PIN_USER (1<<4)
|
|
#define PIN_UPDATE (1<<5)
|
|
#define PIN_ZONE_4G (1<<6)
|
|
#define PIN_HIGH (1<<7)
|
|
#define PIN_OFFSET_FIXED (1<<8)
|
|
#define PIN_OFFSET_MASK (~4095)
|
|
int __must_check
|
|
i915_gem_object_pin(struct drm_i915_gem_object *obj,
|
|
struct i915_address_space *vm,
|
|
uint32_t alignment,
|
|
uint64_t flags);
|
|
int __must_check
|
|
i915_gem_object_ggtt_pin(struct drm_i915_gem_object *obj,
|
|
const struct i915_ggtt_view *view,
|
|
uint32_t alignment,
|
|
uint64_t flags);
|
|
|
|
int i915_vma_bind(struct i915_vma *vma, enum i915_cache_level cache_level,
|
|
u32 flags);
|
|
void __i915_vma_set_map_and_fenceable(struct i915_vma *vma);
|
|
int __must_check i915_vma_unbind(struct i915_vma *vma);
|
|
/*
|
|
* BEWARE: Do not use the function below unless you can _absolutely_
|
|
* _guarantee_ VMA in question is _not in use_ anywhere.
|
|
*/
|
|
int __must_check __i915_vma_unbind_no_wait(struct i915_vma *vma);
|
|
int i915_gem_object_put_pages(struct drm_i915_gem_object *obj);
|
|
void i915_gem_release_all_mmaps(struct drm_i915_private *dev_priv);
|
|
void i915_gem_release_mmap(struct drm_i915_gem_object *obj);
|
|
|
|
int i915_gem_obj_prepare_shmem_read(struct drm_i915_gem_object *obj,
|
|
int *needs_clflush);
|
|
|
|
int __must_check i915_gem_object_get_pages(struct drm_i915_gem_object *obj);
|
|
|
|
static inline int __sg_page_count(struct scatterlist *sg)
|
|
{
|
|
return sg->length >> PAGE_SHIFT;
|
|
}
|
|
|
|
struct page *
|
|
i915_gem_object_get_dirty_page(struct drm_i915_gem_object *obj, int n);
|
|
|
|
static inline dma_addr_t
|
|
i915_gem_object_get_dma_address(struct drm_i915_gem_object *obj, int n)
|
|
{
|
|
if (n < obj->get_page.last) {
|
|
obj->get_page.sg = obj->pages->sgl;
|
|
obj->get_page.last = 0;
|
|
}
|
|
|
|
while (obj->get_page.last + __sg_page_count(obj->get_page.sg) <= n) {
|
|
obj->get_page.last += __sg_page_count(obj->get_page.sg++);
|
|
if (unlikely(sg_is_chain(obj->get_page.sg)))
|
|
obj->get_page.sg = sg_chain_ptr(obj->get_page.sg);
|
|
}
|
|
|
|
return sg_dma_address(obj->get_page.sg) + ((n - obj->get_page.last) << PAGE_SHIFT);
|
|
}
|
|
|
|
static inline struct page *
|
|
i915_gem_object_get_page(struct drm_i915_gem_object *obj, int n)
|
|
{
|
|
if (WARN_ON(n >= obj->base.size >> PAGE_SHIFT))
|
|
return NULL;
|
|
|
|
if (n < obj->get_page.last) {
|
|
obj->get_page.sg = obj->pages->sgl;
|
|
obj->get_page.last = 0;
|
|
}
|
|
|
|
while (obj->get_page.last + __sg_page_count(obj->get_page.sg) <= n) {
|
|
obj->get_page.last += __sg_page_count(obj->get_page.sg++);
|
|
if (unlikely(sg_is_chain(obj->get_page.sg)))
|
|
obj->get_page.sg = sg_chain_ptr(obj->get_page.sg);
|
|
}
|
|
|
|
return nth_page(sg_page(obj->get_page.sg), n - obj->get_page.last);
|
|
}
|
|
|
|
static inline void i915_gem_object_pin_pages(struct drm_i915_gem_object *obj)
|
|
{
|
|
BUG_ON(obj->pages == NULL);
|
|
obj->pages_pin_count++;
|
|
}
|
|
|
|
static inline void i915_gem_object_unpin_pages(struct drm_i915_gem_object *obj)
|
|
{
|
|
BUG_ON(obj->pages_pin_count == 0);
|
|
obj->pages_pin_count--;
|
|
}
|
|
|
|
/**
|
|
* i915_gem_object_pin_map - return a contiguous mapping of the entire object
|
|
* @obj - the object to map into kernel address space
|
|
*
|
|
* Calls i915_gem_object_pin_pages() to prevent reaping of the object's
|
|
* pages and then returns a contiguous mapping of the backing storage into
|
|
* the kernel address space.
|
|
*
|
|
* The caller must hold the struct_mutex, and is responsible for calling
|
|
* i915_gem_object_unpin_map() when the mapping is no longer required.
|
|
*
|
|
* Returns the pointer through which to access the mapped object, or an
|
|
* ERR_PTR() on error.
|
|
*/
|
|
void *__must_check i915_gem_object_pin_map(struct drm_i915_gem_object *obj);
|
|
|
|
/**
|
|
* i915_gem_object_unpin_map - releases an earlier mapping
|
|
* @obj - the object to unmap
|
|
*
|
|
* After pinning the object and mapping its pages, once you are finished
|
|
* with your access, call i915_gem_object_unpin_map() to release the pin
|
|
* upon the mapping. Once the pin count reaches zero, that mapping may be
|
|
* removed.
|
|
*
|
|
* The caller must hold the struct_mutex.
|
|
*/
|
|
static inline void i915_gem_object_unpin_map(struct drm_i915_gem_object *obj)
|
|
{
|
|
lockdep_assert_held(&obj->base.dev->struct_mutex);
|
|
i915_gem_object_unpin_pages(obj);
|
|
}
|
|
|
|
int __must_check i915_mutex_lock_interruptible(struct drm_device *dev);
|
|
int i915_gem_object_sync(struct drm_i915_gem_object *obj,
|
|
struct intel_engine_cs *to,
|
|
struct drm_i915_gem_request **to_req);
|
|
void i915_vma_move_to_active(struct i915_vma *vma,
|
|
struct drm_i915_gem_request *req);
|
|
int i915_gem_dumb_create(struct drm_file *file_priv,
|
|
struct drm_device *dev,
|
|
struct drm_mode_create_dumb *args);
|
|
int i915_gem_mmap_gtt(struct drm_file *file_priv, struct drm_device *dev,
|
|
uint32_t handle, uint64_t *offset);
|
|
|
|
void i915_gem_track_fb(struct drm_i915_gem_object *old,
|
|
struct drm_i915_gem_object *new,
|
|
unsigned frontbuffer_bits);
|
|
|
|
/**
|
|
* Returns true if seq1 is later than seq2.
|
|
*/
|
|
static inline bool
|
|
i915_seqno_passed(uint32_t seq1, uint32_t seq2)
|
|
{
|
|
return (int32_t)(seq1 - seq2) >= 0;
|
|
}
|
|
|
|
static inline bool i915_gem_request_started(const struct drm_i915_gem_request *req)
|
|
{
|
|
return i915_seqno_passed(intel_engine_get_seqno(req->engine),
|
|
req->previous_seqno);
|
|
}
|
|
|
|
static inline bool i915_gem_request_completed(const struct drm_i915_gem_request *req)
|
|
{
|
|
return i915_seqno_passed(intel_engine_get_seqno(req->engine),
|
|
req->seqno);
|
|
}
|
|
|
|
bool __i915_spin_request(const struct drm_i915_gem_request *request,
|
|
int state, unsigned long timeout_us);
|
|
static inline bool i915_spin_request(const struct drm_i915_gem_request *request,
|
|
int state, unsigned long timeout_us)
|
|
{
|
|
return (i915_gem_request_started(request) &&
|
|
__i915_spin_request(request, state, timeout_us));
|
|
}
|
|
|
|
int __must_check i915_gem_get_seqno(struct drm_i915_private *dev_priv, u32 *seqno);
|
|
int __must_check i915_gem_set_seqno(struct drm_device *dev, u32 seqno);
|
|
|
|
struct drm_i915_gem_request *
|
|
i915_gem_find_active_request(struct intel_engine_cs *engine);
|
|
|
|
void i915_gem_retire_requests(struct drm_i915_private *dev_priv);
|
|
void i915_gem_retire_requests_ring(struct intel_engine_cs *engine);
|
|
|
|
static inline u32 i915_reset_counter(struct i915_gpu_error *error)
|
|
{
|
|
return atomic_read(&error->reset_counter);
|
|
}
|
|
|
|
static inline bool __i915_reset_in_progress(u32 reset)
|
|
{
|
|
return unlikely(reset & I915_RESET_IN_PROGRESS_FLAG);
|
|
}
|
|
|
|
static inline bool __i915_reset_in_progress_or_wedged(u32 reset)
|
|
{
|
|
return unlikely(reset & (I915_RESET_IN_PROGRESS_FLAG | I915_WEDGED));
|
|
}
|
|
|
|
static inline bool __i915_terminally_wedged(u32 reset)
|
|
{
|
|
return unlikely(reset & I915_WEDGED);
|
|
}
|
|
|
|
static inline bool i915_reset_in_progress(struct i915_gpu_error *error)
|
|
{
|
|
return __i915_reset_in_progress(i915_reset_counter(error));
|
|
}
|
|
|
|
static inline bool i915_reset_in_progress_or_wedged(struct i915_gpu_error *error)
|
|
{
|
|
return __i915_reset_in_progress_or_wedged(i915_reset_counter(error));
|
|
}
|
|
|
|
static inline bool i915_terminally_wedged(struct i915_gpu_error *error)
|
|
{
|
|
return __i915_terminally_wedged(i915_reset_counter(error));
|
|
}
|
|
|
|
static inline u32 i915_reset_count(struct i915_gpu_error *error)
|
|
{
|
|
return ((i915_reset_counter(error) & ~I915_WEDGED) + 1) / 2;
|
|
}
|
|
|
|
void i915_gem_reset(struct drm_device *dev);
|
|
bool i915_gem_clflush_object(struct drm_i915_gem_object *obj, bool force);
|
|
int __must_check i915_gem_init(struct drm_device *dev);
|
|
int i915_gem_init_engines(struct drm_device *dev);
|
|
int __must_check i915_gem_init_hw(struct drm_device *dev);
|
|
void i915_gem_init_swizzling(struct drm_device *dev);
|
|
void i915_gem_cleanup_engines(struct drm_device *dev);
|
|
int __must_check i915_gem_wait_for_idle(struct drm_i915_private *dev_priv);
|
|
int __must_check i915_gem_suspend(struct drm_device *dev);
|
|
void __i915_add_request(struct drm_i915_gem_request *req,
|
|
struct drm_i915_gem_object *batch_obj,
|
|
bool flush_caches);
|
|
#define i915_add_request(req) \
|
|
__i915_add_request(req, NULL, true)
|
|
#define i915_add_request_no_flush(req) \
|
|
__i915_add_request(req, NULL, false)
|
|
int __i915_wait_request(struct drm_i915_gem_request *req,
|
|
bool interruptible,
|
|
s64 *timeout,
|
|
struct intel_rps_client *rps);
|
|
int __must_check i915_wait_request(struct drm_i915_gem_request *req);
|
|
int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf);
|
|
int __must_check
|
|
i915_gem_object_wait_rendering(struct drm_i915_gem_object *obj,
|
|
bool readonly);
|
|
int __must_check
|
|
i915_gem_object_set_to_gtt_domain(struct drm_i915_gem_object *obj,
|
|
bool write);
|
|
int __must_check
|
|
i915_gem_object_set_to_cpu_domain(struct drm_i915_gem_object *obj, bool write);
|
|
int __must_check
|
|
i915_gem_object_pin_to_display_plane(struct drm_i915_gem_object *obj,
|
|
u32 alignment,
|
|
const struct i915_ggtt_view *view);
|
|
void i915_gem_object_unpin_from_display_plane(struct drm_i915_gem_object *obj,
|
|
const struct i915_ggtt_view *view);
|
|
int i915_gem_object_attach_phys(struct drm_i915_gem_object *obj,
|
|
int align);
|
|
int i915_gem_open(struct drm_device *dev, struct drm_file *file);
|
|
void i915_gem_release(struct drm_device *dev, struct drm_file *file);
|
|
|
|
uint32_t
|
|
i915_gem_get_gtt_size(struct drm_device *dev, uint32_t size, int tiling_mode);
|
|
uint32_t
|
|
i915_gem_get_gtt_alignment(struct drm_device *dev, uint32_t size,
|
|
int tiling_mode, bool fenced);
|
|
|
|
int i915_gem_object_set_cache_level(struct drm_i915_gem_object *obj,
|
|
enum i915_cache_level cache_level);
|
|
|
|
struct drm_gem_object *i915_gem_prime_import(struct drm_device *dev,
|
|
struct dma_buf *dma_buf);
|
|
|
|
struct dma_buf *i915_gem_prime_export(struct drm_device *dev,
|
|
struct drm_gem_object *gem_obj, int flags);
|
|
|
|
u64 i915_gem_obj_ggtt_offset_view(struct drm_i915_gem_object *o,
|
|
const struct i915_ggtt_view *view);
|
|
u64 i915_gem_obj_offset(struct drm_i915_gem_object *o,
|
|
struct i915_address_space *vm);
|
|
static inline u64
|
|
i915_gem_obj_ggtt_offset(struct drm_i915_gem_object *o)
|
|
{
|
|
return i915_gem_obj_ggtt_offset_view(o, &i915_ggtt_view_normal);
|
|
}
|
|
|
|
bool i915_gem_obj_bound_any(struct drm_i915_gem_object *o);
|
|
bool i915_gem_obj_ggtt_bound_view(struct drm_i915_gem_object *o,
|
|
const struct i915_ggtt_view *view);
|
|
bool i915_gem_obj_bound(struct drm_i915_gem_object *o,
|
|
struct i915_address_space *vm);
|
|
|
|
struct i915_vma *
|
|
i915_gem_obj_to_vma(struct drm_i915_gem_object *obj,
|
|
struct i915_address_space *vm);
|
|
struct i915_vma *
|
|
i915_gem_obj_to_ggtt_view(struct drm_i915_gem_object *obj,
|
|
const struct i915_ggtt_view *view);
|
|
|
|
struct i915_vma *
|
|
i915_gem_obj_lookup_or_create_vma(struct drm_i915_gem_object *obj,
|
|
struct i915_address_space *vm);
|
|
struct i915_vma *
|
|
i915_gem_obj_lookup_or_create_ggtt_vma(struct drm_i915_gem_object *obj,
|
|
const struct i915_ggtt_view *view);
|
|
|
|
static inline struct i915_vma *
|
|
i915_gem_obj_to_ggtt(struct drm_i915_gem_object *obj)
|
|
{
|
|
return i915_gem_obj_to_ggtt_view(obj, &i915_ggtt_view_normal);
|
|
}
|
|
bool i915_gem_obj_is_pinned(struct drm_i915_gem_object *obj);
|
|
|
|
/* Some GGTT VM helpers */
|
|
static inline struct i915_hw_ppgtt *
|
|
i915_vm_to_ppgtt(struct i915_address_space *vm)
|
|
{
|
|
return container_of(vm, struct i915_hw_ppgtt, base);
|
|
}
|
|
|
|
|
|
static inline bool i915_gem_obj_ggtt_bound(struct drm_i915_gem_object *obj)
|
|
{
|
|
return i915_gem_obj_ggtt_bound_view(obj, &i915_ggtt_view_normal);
|
|
}
|
|
|
|
unsigned long
|
|
i915_gem_obj_ggtt_size(struct drm_i915_gem_object *obj);
|
|
|
|
static inline int __must_check
|
|
i915_gem_obj_ggtt_pin(struct drm_i915_gem_object *obj,
|
|
uint32_t alignment,
|
|
unsigned flags)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(obj->base.dev);
|
|
struct i915_ggtt *ggtt = &dev_priv->ggtt;
|
|
|
|
return i915_gem_object_pin(obj, &ggtt->base,
|
|
alignment, flags | PIN_GLOBAL);
|
|
}
|
|
|
|
void i915_gem_object_ggtt_unpin_view(struct drm_i915_gem_object *obj,
|
|
const struct i915_ggtt_view *view);
|
|
static inline void
|
|
i915_gem_object_ggtt_unpin(struct drm_i915_gem_object *obj)
|
|
{
|
|
i915_gem_object_ggtt_unpin_view(obj, &i915_ggtt_view_normal);
|
|
}
|
|
|
|
/* i915_gem_fence.c */
|
|
int __must_check i915_gem_object_get_fence(struct drm_i915_gem_object *obj);
|
|
int __must_check i915_gem_object_put_fence(struct drm_i915_gem_object *obj);
|
|
|
|
bool i915_gem_object_pin_fence(struct drm_i915_gem_object *obj);
|
|
void i915_gem_object_unpin_fence(struct drm_i915_gem_object *obj);
|
|
|
|
void i915_gem_restore_fences(struct drm_device *dev);
|
|
|
|
void i915_gem_detect_bit_6_swizzle(struct drm_device *dev);
|
|
void i915_gem_object_do_bit_17_swizzle(struct drm_i915_gem_object *obj);
|
|
void i915_gem_object_save_bit_17_swizzle(struct drm_i915_gem_object *obj);
|
|
|
|
/* i915_gem_context.c */
|
|
int __must_check i915_gem_context_init(struct drm_device *dev);
|
|
void i915_gem_context_lost(struct drm_i915_private *dev_priv);
|
|
void i915_gem_context_fini(struct drm_device *dev);
|
|
void i915_gem_context_reset(struct drm_device *dev);
|
|
int i915_gem_context_open(struct drm_device *dev, struct drm_file *file);
|
|
void i915_gem_context_close(struct drm_device *dev, struct drm_file *file);
|
|
int i915_switch_context(struct drm_i915_gem_request *req);
|
|
void i915_gem_context_free(struct kref *ctx_ref);
|
|
struct drm_i915_gem_object *
|
|
i915_gem_alloc_context_obj(struct drm_device *dev, size_t size);
|
|
struct i915_gem_context *
|
|
i915_gem_context_create_gvt(struct drm_device *dev);
|
|
|
|
static inline struct i915_gem_context *
|
|
i915_gem_context_lookup(struct drm_i915_file_private *file_priv, u32 id)
|
|
{
|
|
struct i915_gem_context *ctx;
|
|
|
|
lockdep_assert_held(&file_priv->dev_priv->drm.struct_mutex);
|
|
|
|
ctx = idr_find(&file_priv->context_idr, id);
|
|
if (!ctx)
|
|
return ERR_PTR(-ENOENT);
|
|
|
|
return ctx;
|
|
}
|
|
|
|
static inline void i915_gem_context_reference(struct i915_gem_context *ctx)
|
|
{
|
|
kref_get(&ctx->ref);
|
|
}
|
|
|
|
static inline void i915_gem_context_unreference(struct i915_gem_context *ctx)
|
|
{
|
|
lockdep_assert_held(&ctx->i915->drm.struct_mutex);
|
|
kref_put(&ctx->ref, i915_gem_context_free);
|
|
}
|
|
|
|
static inline bool i915_gem_context_is_default(const struct i915_gem_context *c)
|
|
{
|
|
return c->user_handle == DEFAULT_CONTEXT_HANDLE;
|
|
}
|
|
|
|
int i915_gem_context_create_ioctl(struct drm_device *dev, void *data,
|
|
struct drm_file *file);
|
|
int i915_gem_context_destroy_ioctl(struct drm_device *dev, void *data,
|
|
struct drm_file *file);
|
|
int i915_gem_context_getparam_ioctl(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv);
|
|
int i915_gem_context_setparam_ioctl(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv);
|
|
int i915_gem_context_reset_stats_ioctl(struct drm_device *dev, void *data,
|
|
struct drm_file *file);
|
|
|
|
/* i915_gem_evict.c */
|
|
int __must_check i915_gem_evict_something(struct drm_device *dev,
|
|
struct i915_address_space *vm,
|
|
int min_size,
|
|
unsigned alignment,
|
|
unsigned cache_level,
|
|
unsigned long start,
|
|
unsigned long end,
|
|
unsigned flags);
|
|
int __must_check i915_gem_evict_for_vma(struct i915_vma *target);
|
|
int i915_gem_evict_vm(struct i915_address_space *vm, bool do_idle);
|
|
|
|
/* belongs in i915_gem_gtt.h */
|
|
static inline void i915_gem_chipset_flush(struct drm_i915_private *dev_priv)
|
|
{
|
|
wmb();
|
|
if (INTEL_GEN(dev_priv) < 6)
|
|
intel_gtt_chipset_flush();
|
|
}
|
|
|
|
/* i915_gem_stolen.c */
|
|
int i915_gem_stolen_insert_node(struct drm_i915_private *dev_priv,
|
|
struct drm_mm_node *node, u64 size,
|
|
unsigned alignment);
|
|
int i915_gem_stolen_insert_node_in_range(struct drm_i915_private *dev_priv,
|
|
struct drm_mm_node *node, u64 size,
|
|
unsigned alignment, u64 start,
|
|
u64 end);
|
|
void i915_gem_stolen_remove_node(struct drm_i915_private *dev_priv,
|
|
struct drm_mm_node *node);
|
|
int i915_gem_init_stolen(struct drm_device *dev);
|
|
void i915_gem_cleanup_stolen(struct drm_device *dev);
|
|
struct drm_i915_gem_object *
|
|
i915_gem_object_create_stolen(struct drm_device *dev, u32 size);
|
|
struct drm_i915_gem_object *
|
|
i915_gem_object_create_stolen_for_preallocated(struct drm_device *dev,
|
|
u32 stolen_offset,
|
|
u32 gtt_offset,
|
|
u32 size);
|
|
|
|
/* i915_gem_shrinker.c */
|
|
unsigned long i915_gem_shrink(struct drm_i915_private *dev_priv,
|
|
unsigned long target,
|
|
unsigned flags);
|
|
#define I915_SHRINK_PURGEABLE 0x1
|
|
#define I915_SHRINK_UNBOUND 0x2
|
|
#define I915_SHRINK_BOUND 0x4
|
|
#define I915_SHRINK_ACTIVE 0x8
|
|
#define I915_SHRINK_VMAPS 0x10
|
|
unsigned long i915_gem_shrink_all(struct drm_i915_private *dev_priv);
|
|
void i915_gem_shrinker_init(struct drm_i915_private *dev_priv);
|
|
void i915_gem_shrinker_cleanup(struct drm_i915_private *dev_priv);
|
|
|
|
|
|
/* i915_gem_tiling.c */
|
|
static inline bool i915_gem_object_needs_bit17_swizzle(struct drm_i915_gem_object *obj)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(obj->base.dev);
|
|
|
|
return dev_priv->mm.bit_6_swizzle_x == I915_BIT_6_SWIZZLE_9_10_17 &&
|
|
obj->tiling_mode != I915_TILING_NONE;
|
|
}
|
|
|
|
/* i915_gem_debug.c */
|
|
#if WATCH_LISTS
|
|
int i915_verify_lists(struct drm_device *dev);
|
|
#else
|
|
#define i915_verify_lists(dev) 0
|
|
#endif
|
|
|
|
/* i915_debugfs.c */
|
|
#ifdef CONFIG_DEBUG_FS
|
|
int i915_debugfs_register(struct drm_i915_private *dev_priv);
|
|
void i915_debugfs_unregister(struct drm_i915_private *dev_priv);
|
|
int i915_debugfs_connector_add(struct drm_connector *connector);
|
|
void intel_display_crc_init(struct drm_device *dev);
|
|
#else
|
|
static inline int i915_debugfs_register(struct drm_i915_private *dev_priv) {return 0;}
|
|
static inline void i915_debugfs_unregister(struct drm_i915_private *dev_priv) {}
|
|
static inline int i915_debugfs_connector_add(struct drm_connector *connector)
|
|
{ return 0; }
|
|
static inline void intel_display_crc_init(struct drm_device *dev) {}
|
|
#endif
|
|
|
|
/* i915_gpu_error.c */
|
|
__printf(2, 3)
|
|
void i915_error_printf(struct drm_i915_error_state_buf *e, const char *f, ...);
|
|
int i915_error_state_to_str(struct drm_i915_error_state_buf *estr,
|
|
const struct i915_error_state_file_priv *error);
|
|
int i915_error_state_buf_init(struct drm_i915_error_state_buf *eb,
|
|
struct drm_i915_private *i915,
|
|
size_t count, loff_t pos);
|
|
static inline void i915_error_state_buf_release(
|
|
struct drm_i915_error_state_buf *eb)
|
|
{
|
|
kfree(eb->buf);
|
|
}
|
|
void i915_capture_error_state(struct drm_i915_private *dev_priv,
|
|
u32 engine_mask,
|
|
const char *error_msg);
|
|
void i915_error_state_get(struct drm_device *dev,
|
|
struct i915_error_state_file_priv *error_priv);
|
|
void i915_error_state_put(struct i915_error_state_file_priv *error_priv);
|
|
void i915_destroy_error_state(struct drm_device *dev);
|
|
|
|
void i915_get_extra_instdone(struct drm_i915_private *dev_priv, uint32_t *instdone);
|
|
const char *i915_cache_level_str(struct drm_i915_private *i915, int type);
|
|
|
|
/* i915_cmd_parser.c */
|
|
int i915_cmd_parser_get_version(struct drm_i915_private *dev_priv);
|
|
int i915_cmd_parser_init_ring(struct intel_engine_cs *engine);
|
|
void i915_cmd_parser_fini_ring(struct intel_engine_cs *engine);
|
|
bool i915_needs_cmd_parser(struct intel_engine_cs *engine);
|
|
int i915_parse_cmds(struct intel_engine_cs *engine,
|
|
struct drm_i915_gem_object *batch_obj,
|
|
struct drm_i915_gem_object *shadow_batch_obj,
|
|
u32 batch_start_offset,
|
|
u32 batch_len,
|
|
bool is_master);
|
|
|
|
/* i915_suspend.c */
|
|
extern int i915_save_state(struct drm_device *dev);
|
|
extern int i915_restore_state(struct drm_device *dev);
|
|
|
|
/* i915_sysfs.c */
|
|
void i915_setup_sysfs(struct drm_device *dev_priv);
|
|
void i915_teardown_sysfs(struct drm_device *dev_priv);
|
|
|
|
/* intel_i2c.c */
|
|
extern int intel_setup_gmbus(struct drm_device *dev);
|
|
extern void intel_teardown_gmbus(struct drm_device *dev);
|
|
extern bool intel_gmbus_is_valid_pin(struct drm_i915_private *dev_priv,
|
|
unsigned int pin);
|
|
|
|
extern struct i2c_adapter *
|
|
intel_gmbus_get_adapter(struct drm_i915_private *dev_priv, unsigned int pin);
|
|
extern void intel_gmbus_set_speed(struct i2c_adapter *adapter, int speed);
|
|
extern void intel_gmbus_force_bit(struct i2c_adapter *adapter, bool force_bit);
|
|
static inline bool intel_gmbus_is_forced_bit(struct i2c_adapter *adapter)
|
|
{
|
|
return container_of(adapter, struct intel_gmbus, adapter)->force_bit;
|
|
}
|
|
extern void intel_i2c_reset(struct drm_device *dev);
|
|
|
|
/* intel_bios.c */
|
|
int intel_bios_init(struct drm_i915_private *dev_priv);
|
|
bool intel_bios_is_valid_vbt(const void *buf, size_t size);
|
|
bool intel_bios_is_tv_present(struct drm_i915_private *dev_priv);
|
|
bool intel_bios_is_lvds_present(struct drm_i915_private *dev_priv, u8 *i2c_pin);
|
|
bool intel_bios_is_port_present(struct drm_i915_private *dev_priv, enum port port);
|
|
bool intel_bios_is_port_edp(struct drm_i915_private *dev_priv, enum port port);
|
|
bool intel_bios_is_port_dp_dual_mode(struct drm_i915_private *dev_priv, enum port port);
|
|
bool intel_bios_is_dsi_present(struct drm_i915_private *dev_priv, enum port *port);
|
|
bool intel_bios_is_port_hpd_inverted(struct drm_i915_private *dev_priv,
|
|
enum port port);
|
|
|
|
/* intel_opregion.c */
|
|
#ifdef CONFIG_ACPI
|
|
extern int intel_opregion_setup(struct drm_i915_private *dev_priv);
|
|
extern void intel_opregion_register(struct drm_i915_private *dev_priv);
|
|
extern void intel_opregion_unregister(struct drm_i915_private *dev_priv);
|
|
extern void intel_opregion_asle_intr(struct drm_i915_private *dev_priv);
|
|
extern int intel_opregion_notify_encoder(struct intel_encoder *intel_encoder,
|
|
bool enable);
|
|
extern int intel_opregion_notify_adapter(struct drm_i915_private *dev_priv,
|
|
pci_power_t state);
|
|
extern int intel_opregion_get_panel_type(struct drm_i915_private *dev_priv);
|
|
#else
|
|
static inline int intel_opregion_setup(struct drm_i915_private *dev) { return 0; }
|
|
static inline void intel_opregion_register(struct drm_i915_private *dev_priv) { }
|
|
static inline void intel_opregion_unregister(struct drm_i915_private *dev_priv) { }
|
|
static inline void intel_opregion_asle_intr(struct drm_i915_private *dev_priv)
|
|
{
|
|
}
|
|
static inline int
|
|
intel_opregion_notify_encoder(struct intel_encoder *intel_encoder, bool enable)
|
|
{
|
|
return 0;
|
|
}
|
|
static inline int
|
|
intel_opregion_notify_adapter(struct drm_i915_private *dev, pci_power_t state)
|
|
{
|
|
return 0;
|
|
}
|
|
static inline int intel_opregion_get_panel_type(struct drm_i915_private *dev)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
#endif
|
|
|
|
/* intel_acpi.c */
|
|
#ifdef CONFIG_ACPI
|
|
extern void intel_register_dsm_handler(void);
|
|
extern void intel_unregister_dsm_handler(void);
|
|
#else
|
|
static inline void intel_register_dsm_handler(void) { return; }
|
|
static inline void intel_unregister_dsm_handler(void) { return; }
|
|
#endif /* CONFIG_ACPI */
|
|
|
|
/* intel_device_info.c */
|
|
static inline struct intel_device_info *
|
|
mkwrite_device_info(struct drm_i915_private *dev_priv)
|
|
{
|
|
return (struct intel_device_info *)&dev_priv->info;
|
|
}
|
|
|
|
void intel_device_info_runtime_init(struct drm_i915_private *dev_priv);
|
|
void intel_device_info_dump(struct drm_i915_private *dev_priv);
|
|
|
|
/* modesetting */
|
|
extern void intel_modeset_init_hw(struct drm_device *dev);
|
|
extern void intel_modeset_init(struct drm_device *dev);
|
|
extern void intel_modeset_gem_init(struct drm_device *dev);
|
|
extern void intel_modeset_cleanup(struct drm_device *dev);
|
|
extern int intel_connector_register(struct drm_connector *);
|
|
extern void intel_connector_unregister(struct drm_connector *);
|
|
extern int intel_modeset_vga_set_state(struct drm_device *dev, bool state);
|
|
extern void intel_display_resume(struct drm_device *dev);
|
|
extern void i915_redisable_vga(struct drm_device *dev);
|
|
extern void i915_redisable_vga_power_on(struct drm_device *dev);
|
|
extern bool ironlake_set_drps(struct drm_i915_private *dev_priv, u8 val);
|
|
extern void intel_init_pch_refclk(struct drm_device *dev);
|
|
extern void intel_set_rps(struct drm_i915_private *dev_priv, u8 val);
|
|
extern void intel_set_memory_cxsr(struct drm_i915_private *dev_priv,
|
|
bool enable);
|
|
|
|
extern bool i915_semaphore_is_enabled(struct drm_i915_private *dev_priv);
|
|
int i915_reg_read_ioctl(struct drm_device *dev, void *data,
|
|
struct drm_file *file);
|
|
|
|
/* overlay */
|
|
extern struct intel_overlay_error_state *
|
|
intel_overlay_capture_error_state(struct drm_i915_private *dev_priv);
|
|
extern void intel_overlay_print_error_state(struct drm_i915_error_state_buf *e,
|
|
struct intel_overlay_error_state *error);
|
|
|
|
extern struct intel_display_error_state *
|
|
intel_display_capture_error_state(struct drm_i915_private *dev_priv);
|
|
extern void intel_display_print_error_state(struct drm_i915_error_state_buf *e,
|
|
struct drm_device *dev,
|
|
struct intel_display_error_state *error);
|
|
|
|
int sandybridge_pcode_read(struct drm_i915_private *dev_priv, u32 mbox, u32 *val);
|
|
int sandybridge_pcode_write(struct drm_i915_private *dev_priv, u32 mbox, u32 val);
|
|
|
|
/* intel_sideband.c */
|
|
u32 vlv_punit_read(struct drm_i915_private *dev_priv, u32 addr);
|
|
void vlv_punit_write(struct drm_i915_private *dev_priv, u32 addr, u32 val);
|
|
u32 vlv_nc_read(struct drm_i915_private *dev_priv, u8 addr);
|
|
u32 vlv_iosf_sb_read(struct drm_i915_private *dev_priv, u8 port, u32 reg);
|
|
void vlv_iosf_sb_write(struct drm_i915_private *dev_priv, u8 port, u32 reg, u32 val);
|
|
u32 vlv_cck_read(struct drm_i915_private *dev_priv, u32 reg);
|
|
void vlv_cck_write(struct drm_i915_private *dev_priv, u32 reg, u32 val);
|
|
u32 vlv_ccu_read(struct drm_i915_private *dev_priv, u32 reg);
|
|
void vlv_ccu_write(struct drm_i915_private *dev_priv, u32 reg, u32 val);
|
|
u32 vlv_bunit_read(struct drm_i915_private *dev_priv, u32 reg);
|
|
void vlv_bunit_write(struct drm_i915_private *dev_priv, u32 reg, u32 val);
|
|
u32 vlv_dpio_read(struct drm_i915_private *dev_priv, enum pipe pipe, int reg);
|
|
void vlv_dpio_write(struct drm_i915_private *dev_priv, enum pipe pipe, int reg, u32 val);
|
|
u32 intel_sbi_read(struct drm_i915_private *dev_priv, u16 reg,
|
|
enum intel_sbi_destination destination);
|
|
void intel_sbi_write(struct drm_i915_private *dev_priv, u16 reg, u32 value,
|
|
enum intel_sbi_destination destination);
|
|
u32 vlv_flisdsi_read(struct drm_i915_private *dev_priv, u32 reg);
|
|
void vlv_flisdsi_write(struct drm_i915_private *dev_priv, u32 reg, u32 val);
|
|
|
|
/* intel_dpio_phy.c */
|
|
void chv_set_phy_signal_level(struct intel_encoder *encoder,
|
|
u32 deemph_reg_value, u32 margin_reg_value,
|
|
bool uniq_trans_scale);
|
|
void chv_data_lane_soft_reset(struct intel_encoder *encoder,
|
|
bool reset);
|
|
void chv_phy_pre_pll_enable(struct intel_encoder *encoder);
|
|
void chv_phy_pre_encoder_enable(struct intel_encoder *encoder);
|
|
void chv_phy_release_cl2_override(struct intel_encoder *encoder);
|
|
void chv_phy_post_pll_disable(struct intel_encoder *encoder);
|
|
|
|
void vlv_set_phy_signal_level(struct intel_encoder *encoder,
|
|
u32 demph_reg_value, u32 preemph_reg_value,
|
|
u32 uniqtranscale_reg_value, u32 tx3_demph);
|
|
void vlv_phy_pre_pll_enable(struct intel_encoder *encoder);
|
|
void vlv_phy_pre_encoder_enable(struct intel_encoder *encoder);
|
|
void vlv_phy_reset_lanes(struct intel_encoder *encoder);
|
|
|
|
int intel_gpu_freq(struct drm_i915_private *dev_priv, int val);
|
|
int intel_freq_opcode(struct drm_i915_private *dev_priv, int val);
|
|
|
|
#define I915_READ8(reg) dev_priv->uncore.funcs.mmio_readb(dev_priv, (reg), true)
|
|
#define I915_WRITE8(reg, val) dev_priv->uncore.funcs.mmio_writeb(dev_priv, (reg), (val), true)
|
|
|
|
#define I915_READ16(reg) dev_priv->uncore.funcs.mmio_readw(dev_priv, (reg), true)
|
|
#define I915_WRITE16(reg, val) dev_priv->uncore.funcs.mmio_writew(dev_priv, (reg), (val), true)
|
|
#define I915_READ16_NOTRACE(reg) dev_priv->uncore.funcs.mmio_readw(dev_priv, (reg), false)
|
|
#define I915_WRITE16_NOTRACE(reg, val) dev_priv->uncore.funcs.mmio_writew(dev_priv, (reg), (val), false)
|
|
|
|
#define I915_READ(reg) dev_priv->uncore.funcs.mmio_readl(dev_priv, (reg), true)
|
|
#define I915_WRITE(reg, val) dev_priv->uncore.funcs.mmio_writel(dev_priv, (reg), (val), true)
|
|
#define I915_READ_NOTRACE(reg) dev_priv->uncore.funcs.mmio_readl(dev_priv, (reg), false)
|
|
#define I915_WRITE_NOTRACE(reg, val) dev_priv->uncore.funcs.mmio_writel(dev_priv, (reg), (val), false)
|
|
|
|
/* Be very careful with read/write 64-bit values. On 32-bit machines, they
|
|
* will be implemented using 2 32-bit writes in an arbitrary order with
|
|
* an arbitrary delay between them. This can cause the hardware to
|
|
* act upon the intermediate value, possibly leading to corruption and
|
|
* machine death. You have been warned.
|
|
*/
|
|
#define I915_WRITE64(reg, val) dev_priv->uncore.funcs.mmio_writeq(dev_priv, (reg), (val), true)
|
|
#define I915_READ64(reg) dev_priv->uncore.funcs.mmio_readq(dev_priv, (reg), true)
|
|
|
|
#define I915_READ64_2x32(lower_reg, upper_reg) ({ \
|
|
u32 upper, lower, old_upper, loop = 0; \
|
|
upper = I915_READ(upper_reg); \
|
|
do { \
|
|
old_upper = upper; \
|
|
lower = I915_READ(lower_reg); \
|
|
upper = I915_READ(upper_reg); \
|
|
} while (upper != old_upper && loop++ < 2); \
|
|
(u64)upper << 32 | lower; })
|
|
|
|
#define POSTING_READ(reg) (void)I915_READ_NOTRACE(reg)
|
|
#define POSTING_READ16(reg) (void)I915_READ16_NOTRACE(reg)
|
|
|
|
#define __raw_read(x, s) \
|
|
static inline uint##x##_t __raw_i915_read##x(struct drm_i915_private *dev_priv, \
|
|
i915_reg_t reg) \
|
|
{ \
|
|
return read##s(dev_priv->regs + i915_mmio_reg_offset(reg)); \
|
|
}
|
|
|
|
#define __raw_write(x, s) \
|
|
static inline void __raw_i915_write##x(struct drm_i915_private *dev_priv, \
|
|
i915_reg_t reg, uint##x##_t val) \
|
|
{ \
|
|
write##s(val, dev_priv->regs + i915_mmio_reg_offset(reg)); \
|
|
}
|
|
__raw_read(8, b)
|
|
__raw_read(16, w)
|
|
__raw_read(32, l)
|
|
__raw_read(64, q)
|
|
|
|
__raw_write(8, b)
|
|
__raw_write(16, w)
|
|
__raw_write(32, l)
|
|
__raw_write(64, q)
|
|
|
|
#undef __raw_read
|
|
#undef __raw_write
|
|
|
|
/* These are untraced mmio-accessors that are only valid to be used inside
|
|
* criticial sections inside IRQ handlers where forcewake is explicitly
|
|
* controlled.
|
|
* Think twice, and think again, before using these.
|
|
* Note: Should only be used between intel_uncore_forcewake_irqlock() and
|
|
* intel_uncore_forcewake_irqunlock().
|
|
*/
|
|
#define I915_READ_FW(reg__) __raw_i915_read32(dev_priv, (reg__))
|
|
#define I915_WRITE_FW(reg__, val__) __raw_i915_write32(dev_priv, (reg__), (val__))
|
|
#define I915_WRITE64_FW(reg__, val__) __raw_i915_write64(dev_priv, (reg__), (val__))
|
|
#define POSTING_READ_FW(reg__) (void)I915_READ_FW(reg__)
|
|
|
|
/* "Broadcast RGB" property */
|
|
#define INTEL_BROADCAST_RGB_AUTO 0
|
|
#define INTEL_BROADCAST_RGB_FULL 1
|
|
#define INTEL_BROADCAST_RGB_LIMITED 2
|
|
|
|
static inline i915_reg_t i915_vgacntrl_reg(struct drm_device *dev)
|
|
{
|
|
if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
|
|
return VLV_VGACNTRL;
|
|
else if (INTEL_INFO(dev)->gen >= 5)
|
|
return CPU_VGACNTRL;
|
|
else
|
|
return VGACNTRL;
|
|
}
|
|
|
|
static inline unsigned long msecs_to_jiffies_timeout(const unsigned int m)
|
|
{
|
|
unsigned long j = msecs_to_jiffies(m);
|
|
|
|
return min_t(unsigned long, MAX_JIFFY_OFFSET, j + 1);
|
|
}
|
|
|
|
static inline unsigned long nsecs_to_jiffies_timeout(const u64 n)
|
|
{
|
|
return min_t(u64, MAX_JIFFY_OFFSET, nsecs_to_jiffies64(n) + 1);
|
|
}
|
|
|
|
static inline unsigned long
|
|
timespec_to_jiffies_timeout(const struct timespec *value)
|
|
{
|
|
unsigned long j = timespec_to_jiffies(value);
|
|
|
|
return min_t(unsigned long, MAX_JIFFY_OFFSET, j + 1);
|
|
}
|
|
|
|
/*
|
|
* If you need to wait X milliseconds between events A and B, but event B
|
|
* doesn't happen exactly after event A, you record the timestamp (jiffies) of
|
|
* when event A happened, then just before event B you call this function and
|
|
* pass the timestamp as the first argument, and X as the second argument.
|
|
*/
|
|
static inline void
|
|
wait_remaining_ms_from_jiffies(unsigned long timestamp_jiffies, int to_wait_ms)
|
|
{
|
|
unsigned long target_jiffies, tmp_jiffies, remaining_jiffies;
|
|
|
|
/*
|
|
* Don't re-read the value of "jiffies" every time since it may change
|
|
* behind our back and break the math.
|
|
*/
|
|
tmp_jiffies = jiffies;
|
|
target_jiffies = timestamp_jiffies +
|
|
msecs_to_jiffies_timeout(to_wait_ms);
|
|
|
|
if (time_after(target_jiffies, tmp_jiffies)) {
|
|
remaining_jiffies = target_jiffies - tmp_jiffies;
|
|
while (remaining_jiffies)
|
|
remaining_jiffies =
|
|
schedule_timeout_uninterruptible(remaining_jiffies);
|
|
}
|
|
}
|
|
static inline bool __i915_request_irq_complete(struct drm_i915_gem_request *req)
|
|
{
|
|
struct intel_engine_cs *engine = req->engine;
|
|
|
|
/* Before we do the heavier coherent read of the seqno,
|
|
* check the value (hopefully) in the CPU cacheline.
|
|
*/
|
|
if (i915_gem_request_completed(req))
|
|
return true;
|
|
|
|
/* Ensure our read of the seqno is coherent so that we
|
|
* do not "miss an interrupt" (i.e. if this is the last
|
|
* request and the seqno write from the GPU is not visible
|
|
* by the time the interrupt fires, we will see that the
|
|
* request is incomplete and go back to sleep awaiting
|
|
* another interrupt that will never come.)
|
|
*
|
|
* Strictly, we only need to do this once after an interrupt,
|
|
* but it is easier and safer to do it every time the waiter
|
|
* is woken.
|
|
*/
|
|
if (engine->irq_seqno_barrier &&
|
|
READ_ONCE(engine->breadcrumbs.irq_seqno_bh) == current &&
|
|
cmpxchg_relaxed(&engine->breadcrumbs.irq_posted, 1, 0)) {
|
|
struct task_struct *tsk;
|
|
|
|
/* The ordering of irq_posted versus applying the barrier
|
|
* is crucial. The clearing of the current irq_posted must
|
|
* be visible before we perform the barrier operation,
|
|
* such that if a subsequent interrupt arrives, irq_posted
|
|
* is reasserted and our task rewoken (which causes us to
|
|
* do another __i915_request_irq_complete() immediately
|
|
* and reapply the barrier). Conversely, if the clear
|
|
* occurs after the barrier, then an interrupt that arrived
|
|
* whilst we waited on the barrier would not trigger a
|
|
* barrier on the next pass, and the read may not see the
|
|
* seqno update.
|
|
*/
|
|
engine->irq_seqno_barrier(engine);
|
|
|
|
/* If we consume the irq, but we are no longer the bottom-half,
|
|
* the real bottom-half may not have serialised their own
|
|
* seqno check with the irq-barrier (i.e. may have inspected
|
|
* the seqno before we believe it coherent since they see
|
|
* irq_posted == false but we are still running).
|
|
*/
|
|
rcu_read_lock();
|
|
tsk = READ_ONCE(engine->breadcrumbs.irq_seqno_bh);
|
|
if (tsk && tsk != current)
|
|
/* Note that if the bottom-half is changed as we
|
|
* are sending the wake-up, the new bottom-half will
|
|
* be woken by whomever made the change. We only have
|
|
* to worry about when we steal the irq-posted for
|
|
* ourself.
|
|
*/
|
|
wake_up_process(tsk);
|
|
rcu_read_unlock();
|
|
|
|
if (i915_gem_request_completed(req))
|
|
return true;
|
|
}
|
|
|
|
/* We need to check whether any gpu reset happened in between
|
|
* the request being submitted and now. If a reset has occurred,
|
|
* the seqno will have been advance past ours and our request
|
|
* is complete. If we are in the process of handling a reset,
|
|
* the request is effectively complete as the rendering will
|
|
* be discarded, but we need to return in order to drop the
|
|
* struct_mutex.
|
|
*/
|
|
if (i915_reset_in_progress(&req->i915->gpu_error))
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
#endif
|