2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 14:43:58 +08:00
linux-next/drivers/gpio/gpio-xilinx.c
Linus Walleij 516df4eb28 gpio: xilinx: Use the right include
This is a GPIO driver so use only <linux/gpio/driver.h>.

Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-08-10 23:19:17 +02:00

403 lines
11 KiB
C

/*
* Xilinx gpio driver for xps/axi_gpio IP.
*
* Copyright 2008 - 2013 Xilinx, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
* as published by the Free Software Foundation.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/bitops.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/of_platform.h>
#include <linux/of_gpio.h>
#include <linux/io.h>
#include <linux/gpio/driver.h>
#include <linux/slab.h>
/* Register Offset Definitions */
#define XGPIO_DATA_OFFSET (0x0) /* Data register */
#define XGPIO_TRI_OFFSET (0x4) /* I/O direction register */
#define XGPIO_CHANNEL_OFFSET 0x8
/* Read/Write access to the GPIO registers */
#if defined(CONFIG_ARCH_ZYNQ) || defined(CONFIG_X86)
# define xgpio_readreg(offset) readl(offset)
# define xgpio_writereg(offset, val) writel(val, offset)
#else
# define xgpio_readreg(offset) __raw_readl(offset)
# define xgpio_writereg(offset, val) __raw_writel(val, offset)
#endif
/**
* struct xgpio_instance - Stores information about GPIO device
* @mmchip: OF GPIO chip for memory mapped banks
* @gpio_width: GPIO width for every channel
* @gpio_state: GPIO state shadow register
* @gpio_dir: GPIO direction shadow register
* @gpio_lock: Lock used for synchronization
*/
struct xgpio_instance {
struct of_mm_gpio_chip mmchip;
unsigned int gpio_width[2];
u32 gpio_state[2];
u32 gpio_dir[2];
spinlock_t gpio_lock[2];
};
static inline int xgpio_index(struct xgpio_instance *chip, int gpio)
{
if (gpio >= chip->gpio_width[0])
return 1;
return 0;
}
static inline int xgpio_regoffset(struct xgpio_instance *chip, int gpio)
{
if (xgpio_index(chip, gpio))
return XGPIO_CHANNEL_OFFSET;
return 0;
}
static inline int xgpio_offset(struct xgpio_instance *chip, int gpio)
{
if (xgpio_index(chip, gpio))
return gpio - chip->gpio_width[0];
return gpio;
}
/**
* xgpio_get - Read the specified signal of the GPIO device.
* @gc: Pointer to gpio_chip device structure.
* @gpio: GPIO signal number.
*
* This function reads the specified signal of the GPIO device.
*
* Return:
* 0 if direction of GPIO signals is set as input otherwise it
* returns negative error value.
*/
static int xgpio_get(struct gpio_chip *gc, unsigned int gpio)
{
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct xgpio_instance *chip = gpiochip_get_data(gc);
u32 val;
val = xgpio_readreg(mm_gc->regs + XGPIO_DATA_OFFSET +
xgpio_regoffset(chip, gpio));
return !!(val & BIT(xgpio_offset(chip, gpio)));
}
/**
* xgpio_set - Write the specified signal of the GPIO device.
* @gc: Pointer to gpio_chip device structure.
* @gpio: GPIO signal number.
* @val: Value to be written to specified signal.
*
* This function writes the specified value in to the specified signal of the
* GPIO device.
*/
static void xgpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
{
unsigned long flags;
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct xgpio_instance *chip = gpiochip_get_data(gc);
int index = xgpio_index(chip, gpio);
int offset = xgpio_offset(chip, gpio);
spin_lock_irqsave(&chip->gpio_lock[index], flags);
/* Write to GPIO signal and set its direction to output */
if (val)
chip->gpio_state[index] |= BIT(offset);
else
chip->gpio_state[index] &= ~BIT(offset);
xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET +
xgpio_regoffset(chip, gpio), chip->gpio_state[index]);
spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
}
/**
* xgpio_set_multiple - Write the specified signals of the GPIO device.
* @gc: Pointer to gpio_chip device structure.
* @mask: Mask of the GPIOS to modify.
* @bits: Value to be wrote on each GPIO
*
* This function writes the specified values into the specified signals of the
* GPIO devices.
*/
static void xgpio_set_multiple(struct gpio_chip *gc, unsigned long *mask,
unsigned long *bits)
{
unsigned long flags;
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct xgpio_instance *chip = gpiochip_get_data(gc);
int index = xgpio_index(chip, 0);
int offset, i;
spin_lock_irqsave(&chip->gpio_lock[index], flags);
/* Write to GPIO signals */
for (i = 0; i < gc->ngpio; i++) {
if (*mask == 0)
break;
if (index != xgpio_index(chip, i)) {
xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET +
xgpio_regoffset(chip, i),
chip->gpio_state[index]);
spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
index = xgpio_index(chip, i);
spin_lock_irqsave(&chip->gpio_lock[index], flags);
}
if (__test_and_clear_bit(i, mask)) {
offset = xgpio_offset(chip, i);
if (test_bit(i, bits))
chip->gpio_state[index] |= BIT(offset);
else
chip->gpio_state[index] &= ~BIT(offset);
}
}
xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET +
xgpio_regoffset(chip, i), chip->gpio_state[index]);
spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
}
/**
* xgpio_dir_in - Set the direction of the specified GPIO signal as input.
* @gc: Pointer to gpio_chip device structure.
* @gpio: GPIO signal number.
*
* Return:
* 0 - if direction of GPIO signals is set as input
* otherwise it returns negative error value.
*/
static int xgpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
{
unsigned long flags;
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct xgpio_instance *chip = gpiochip_get_data(gc);
int index = xgpio_index(chip, gpio);
int offset = xgpio_offset(chip, gpio);
spin_lock_irqsave(&chip->gpio_lock[index], flags);
/* Set the GPIO bit in shadow register and set direction as input */
chip->gpio_dir[index] |= BIT(offset);
xgpio_writereg(mm_gc->regs + XGPIO_TRI_OFFSET +
xgpio_regoffset(chip, gpio), chip->gpio_dir[index]);
spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
return 0;
}
/**
* xgpio_dir_out - Set the direction of the specified GPIO signal as output.
* @gc: Pointer to gpio_chip device structure.
* @gpio: GPIO signal number.
* @val: Value to be written to specified signal.
*
* This function sets the direction of specified GPIO signal as output.
*
* Return:
* If all GPIO signals of GPIO chip is configured as input then it returns
* error otherwise it returns 0.
*/
static int xgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
{
unsigned long flags;
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct xgpio_instance *chip = gpiochip_get_data(gc);
int index = xgpio_index(chip, gpio);
int offset = xgpio_offset(chip, gpio);
spin_lock_irqsave(&chip->gpio_lock[index], flags);
/* Write state of GPIO signal */
if (val)
chip->gpio_state[index] |= BIT(offset);
else
chip->gpio_state[index] &= ~BIT(offset);
xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET +
xgpio_regoffset(chip, gpio), chip->gpio_state[index]);
/* Clear the GPIO bit in shadow register and set direction as output */
chip->gpio_dir[index] &= ~BIT(offset);
xgpio_writereg(mm_gc->regs + XGPIO_TRI_OFFSET +
xgpio_regoffset(chip, gpio), chip->gpio_dir[index]);
spin_unlock_irqrestore(&chip->gpio_lock[index], flags);
return 0;
}
/**
* xgpio_save_regs - Set initial values of GPIO pins
* @mm_gc: Pointer to memory mapped GPIO chip structure
*/
static void xgpio_save_regs(struct of_mm_gpio_chip *mm_gc)
{
struct xgpio_instance *chip =
container_of(mm_gc, struct xgpio_instance, mmchip);
xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET, chip->gpio_state[0]);
xgpio_writereg(mm_gc->regs + XGPIO_TRI_OFFSET, chip->gpio_dir[0]);
if (!chip->gpio_width[1])
return;
xgpio_writereg(mm_gc->regs + XGPIO_DATA_OFFSET + XGPIO_CHANNEL_OFFSET,
chip->gpio_state[1]);
xgpio_writereg(mm_gc->regs + XGPIO_TRI_OFFSET + XGPIO_CHANNEL_OFFSET,
chip->gpio_dir[1]);
}
/**
* xgpio_remove - Remove method for the GPIO device.
* @pdev: pointer to the platform device
*
* This function remove gpiochips and frees all the allocated resources.
*
* Return: 0 always
*/
static int xgpio_remove(struct platform_device *pdev)
{
struct xgpio_instance *chip = platform_get_drvdata(pdev);
of_mm_gpiochip_remove(&chip->mmchip);
return 0;
}
/**
* xgpio_of_probe - Probe method for the GPIO device.
* @pdev: pointer to the platform device
*
* Return:
* It returns 0, if the driver is bound to the GPIO device, or
* a negative value if there is an error.
*/
static int xgpio_probe(struct platform_device *pdev)
{
struct xgpio_instance *chip;
int status = 0;
struct device_node *np = pdev->dev.of_node;
u32 is_dual;
chip = devm_kzalloc(&pdev->dev, sizeof(*chip), GFP_KERNEL);
if (!chip)
return -ENOMEM;
platform_set_drvdata(pdev, chip);
/* Update GPIO state shadow register with default value */
of_property_read_u32(np, "xlnx,dout-default", &chip->gpio_state[0]);
/* Update GPIO direction shadow register with default value */
if (of_property_read_u32(np, "xlnx,tri-default", &chip->gpio_dir[0]))
chip->gpio_dir[0] = 0xFFFFFFFF;
/*
* Check device node and parent device node for device width
* and assume default width of 32
*/
if (of_property_read_u32(np, "xlnx,gpio-width", &chip->gpio_width[0]))
chip->gpio_width[0] = 32;
spin_lock_init(&chip->gpio_lock[0]);
if (of_property_read_u32(np, "xlnx,is-dual", &is_dual))
is_dual = 0;
if (is_dual) {
/* Update GPIO state shadow register with default value */
of_property_read_u32(np, "xlnx,dout-default-2",
&chip->gpio_state[1]);
/* Update GPIO direction shadow register with default value */
if (of_property_read_u32(np, "xlnx,tri-default-2",
&chip->gpio_dir[1]))
chip->gpio_dir[1] = 0xFFFFFFFF;
/*
* Check device node and parent device node for device width
* and assume default width of 32
*/
if (of_property_read_u32(np, "xlnx,gpio2-width",
&chip->gpio_width[1]))
chip->gpio_width[1] = 32;
spin_lock_init(&chip->gpio_lock[1]);
}
chip->mmchip.gc.ngpio = chip->gpio_width[0] + chip->gpio_width[1];
chip->mmchip.gc.parent = &pdev->dev;
chip->mmchip.gc.direction_input = xgpio_dir_in;
chip->mmchip.gc.direction_output = xgpio_dir_out;
chip->mmchip.gc.get = xgpio_get;
chip->mmchip.gc.set = xgpio_set;
chip->mmchip.gc.set_multiple = xgpio_set_multiple;
chip->mmchip.save_regs = xgpio_save_regs;
/* Call the OF gpio helper to setup and register the GPIO device */
status = of_mm_gpiochip_add_data(np, &chip->mmchip, chip);
if (status) {
pr_err("%pOF: error in probe function with status %d\n",
np, status);
return status;
}
return 0;
}
static const struct of_device_id xgpio_of_match[] = {
{ .compatible = "xlnx,xps-gpio-1.00.a", },
{ /* end of list */ },
};
MODULE_DEVICE_TABLE(of, xgpio_of_match);
static struct platform_driver xgpio_plat_driver = {
.probe = xgpio_probe,
.remove = xgpio_remove,
.driver = {
.name = "gpio-xilinx",
.of_match_table = xgpio_of_match,
},
};
static int __init xgpio_init(void)
{
return platform_driver_register(&xgpio_plat_driver);
}
subsys_initcall(xgpio_init);
static void __exit xgpio_exit(void)
{
platform_driver_unregister(&xgpio_plat_driver);
}
module_exit(xgpio_exit);
MODULE_AUTHOR("Xilinx, Inc.");
MODULE_DESCRIPTION("Xilinx GPIO driver");
MODULE_LICENSE("GPL");