2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-22 04:03:58 +08:00
linux-next/include/linux/ssb/ssb_driver_gige.h
Paul Gortmaker 187f1882b5 BUG: headers with BUG/BUG_ON etc. need linux/bug.h
If a header file is making use of BUG, BUG_ON, BUILD_BUG_ON, or any
other BUG variant in a static inline (i.e. not in a #define) then
that header really should be including <linux/bug.h> and not just
expecting it to be implicitly present.

We can make this change risk-free, since if the files using these
headers didn't have exposure to linux/bug.h already, they would have
been causing compile failures/warnings.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2012-03-04 17:54:34 -05:00

181 lines
4.9 KiB
C

#ifndef LINUX_SSB_DRIVER_GIGE_H_
#define LINUX_SSB_DRIVER_GIGE_H_
#include <linux/ssb/ssb.h>
#include <linux/bug.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
#ifdef CONFIG_SSB_DRIVER_GIGE
#define SSB_GIGE_PCIIO 0x0000 /* PCI I/O Registers (1024 bytes) */
#define SSB_GIGE_RESERVED 0x0400 /* Reserved (1024 bytes) */
#define SSB_GIGE_PCICFG 0x0800 /* PCI config space (256 bytes) */
#define SSB_GIGE_SHIM_FLUSHSTAT 0x0C00 /* PCI to OCP: Flush status control (32bit) */
#define SSB_GIGE_SHIM_FLUSHRDA 0x0C04 /* PCI to OCP: Flush read address (32bit) */
#define SSB_GIGE_SHIM_FLUSHTO 0x0C08 /* PCI to OCP: Flush timeout counter (32bit) */
#define SSB_GIGE_SHIM_BARRIER 0x0C0C /* PCI to OCP: Barrier register (32bit) */
#define SSB_GIGE_SHIM_MAOCPSI 0x0C10 /* PCI to OCP: MaocpSI Control (32bit) */
#define SSB_GIGE_SHIM_SIOCPMA 0x0C14 /* PCI to OCP: SiocpMa Control (32bit) */
/* TM Status High flags */
#define SSB_GIGE_TMSHIGH_RGMII 0x00010000 /* Have an RGMII PHY-bus */
/* TM Status Low flags */
#define SSB_GIGE_TMSLOW_TXBYPASS 0x00080000 /* TX bypass (no delay) */
#define SSB_GIGE_TMSLOW_RXBYPASS 0x00100000 /* RX bypass (no delay) */
#define SSB_GIGE_TMSLOW_DLLEN 0x01000000 /* Enable DLL controls */
/* Boardflags (low) */
#define SSB_GIGE_BFL_ROBOSWITCH 0x0010
#define SSB_GIGE_MEM_RES_NAME "SSB Broadcom 47xx GigE memory"
#define SSB_GIGE_IO_RES_NAME "SSB Broadcom 47xx GigE I/O"
struct ssb_gige {
struct ssb_device *dev;
spinlock_t lock;
/* True, if the device has an RGMII bus.
* False, if the device has a GMII bus. */
bool has_rgmii;
/* The PCI controller device. */
struct pci_controller pci_controller;
struct pci_ops pci_ops;
struct resource mem_resource;
struct resource io_resource;
};
/* Check whether a PCI device is a SSB Gigabit Ethernet core. */
extern bool pdev_is_ssb_gige_core(struct pci_dev *pdev);
/* Convert a pci_dev pointer to a ssb_gige pointer. */
static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev)
{
if (!pdev_is_ssb_gige_core(pdev))
return NULL;
return container_of(pdev->bus->ops, struct ssb_gige, pci_ops);
}
/* Returns whether the PHY is connected by an RGMII bus. */
static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev)
{
struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
return (dev ? dev->has_rgmii : 0);
}
/* Returns whether we have a Roboswitch. */
static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev)
{
struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
if (dev)
return !!(dev->dev->bus->sprom.boardflags_lo &
SSB_GIGE_BFL_ROBOSWITCH);
return 0;
}
/* Returns whether we can only do one DMA at once. */
static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev)
{
struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
if (dev)
return ((dev->dev->bus->chip_id == 0x4785) &&
(dev->dev->bus->chip_rev < 2));
return 0;
}
/* Returns whether we must flush posted writes. */
static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev)
{
struct ssb_gige *dev = pdev_to_ssb_gige(pdev);
if (dev)
return (dev->dev->bus->chip_id == 0x4785);
return 0;
}
#ifdef CONFIG_BCM47XX
#include <asm/mach-bcm47xx/nvram.h>
/* Get the device MAC address */
static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
{
char buf[20];
if (nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0)
return;
nvram_parse_macaddr(buf, macaddr);
}
#else
static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
{
}
#endif
extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
struct pci_dev *pdev);
extern int ssb_gige_map_irq(struct ssb_device *sdev,
const struct pci_dev *pdev);
/* The GigE driver is not a standalone module, because we don't have support
* for unregistering the driver. So we could not unload the module anyway. */
extern int ssb_gige_init(void);
static inline void ssb_gige_exit(void)
{
/* Currently we can not unregister the GigE driver,
* because we can not unregister the PCI bridge. */
BUG();
}
#else /* CONFIG_SSB_DRIVER_GIGE */
/* Gigabit Ethernet driver disabled */
static inline int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
struct pci_dev *pdev)
{
return -ENOSYS;
}
static inline int ssb_gige_map_irq(struct ssb_device *sdev,
const struct pci_dev *pdev)
{
return -ENOSYS;
}
static inline int ssb_gige_init(void)
{
return 0;
}
static inline void ssb_gige_exit(void)
{
}
static inline bool pdev_is_ssb_gige_core(struct pci_dev *pdev)
{
return 0;
}
static inline struct ssb_gige * pdev_to_ssb_gige(struct pci_dev *pdev)
{
return NULL;
}
static inline bool ssb_gige_is_rgmii(struct pci_dev *pdev)
{
return 0;
}
static inline bool ssb_gige_have_roboswitch(struct pci_dev *pdev)
{
return 0;
}
static inline bool ssb_gige_one_dma_at_once(struct pci_dev *pdev)
{
return 0;
}
static inline bool ssb_gige_must_flush_posted_writes(struct pci_dev *pdev)
{
return 0;
}
#endif /* CONFIG_SSB_DRIVER_GIGE */
#endif /* LINUX_SSB_DRIVER_GIGE_H_ */