mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-23 12:43:55 +08:00
5deab53665
This patch renames the code name SB900 into Hudson-2 Signed-off-by: Shane Huang <shane.huang@amd.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
284 lines
7.6 KiB
C
284 lines
7.6 KiB
C
/*
|
|
* pata_atiixp.c - ATI PATA for new ATA layer
|
|
* (C) 2005 Red Hat Inc
|
|
* (C) 2009 Bartlomiej Zolnierkiewicz
|
|
*
|
|
* Based on
|
|
*
|
|
* linux/drivers/ide/pci/atiixp.c Version 0.01-bart2 Feb. 26, 2004
|
|
*
|
|
* Copyright (C) 2003 ATI Inc. <hyu@ati.com>
|
|
* Copyright (C) 2004 Bartlomiej Zolnierkiewicz
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/libata.h>
|
|
|
|
#define DRV_NAME "pata_atiixp"
|
|
#define DRV_VERSION "0.4.6"
|
|
|
|
enum {
|
|
ATIIXP_IDE_PIO_TIMING = 0x40,
|
|
ATIIXP_IDE_MWDMA_TIMING = 0x44,
|
|
ATIIXP_IDE_PIO_CONTROL = 0x48,
|
|
ATIIXP_IDE_PIO_MODE = 0x4a,
|
|
ATIIXP_IDE_UDMA_CONTROL = 0x54,
|
|
ATIIXP_IDE_UDMA_MODE = 0x56
|
|
};
|
|
|
|
static int atiixp_cable_detect(struct ata_port *ap)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
u8 udma;
|
|
|
|
/* Hack from drivers/ide/pci. Really we want to know how to do the
|
|
raw detection not play follow the bios mode guess */
|
|
pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ap->port_no, &udma);
|
|
if ((udma & 0x07) >= 0x04 || (udma & 0x70) >= 0x40)
|
|
return ATA_CBL_PATA80;
|
|
return ATA_CBL_PATA40;
|
|
}
|
|
|
|
/**
|
|
* atiixp_set_pio_timing - set initial PIO mode data
|
|
* @ap: ATA interface
|
|
* @adev: ATA device
|
|
*
|
|
* Called by both the pio and dma setup functions to set the controller
|
|
* timings for PIO transfers. We must load both the mode number and
|
|
* timing values into the controller.
|
|
*/
|
|
|
|
static void atiixp_set_pio_timing(struct ata_port *ap, struct ata_device *adev, int pio)
|
|
{
|
|
static u8 pio_timings[5] = { 0x5D, 0x47, 0x34, 0x22, 0x20 };
|
|
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
int dn = 2 * ap->port_no + adev->devno;
|
|
int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1);
|
|
u32 pio_timing_data;
|
|
u16 pio_mode_data;
|
|
|
|
pci_read_config_word(pdev, ATIIXP_IDE_PIO_MODE, &pio_mode_data);
|
|
pio_mode_data &= ~(0x7 << (4 * dn));
|
|
pio_mode_data |= pio << (4 * dn);
|
|
pci_write_config_word(pdev, ATIIXP_IDE_PIO_MODE, pio_mode_data);
|
|
|
|
pci_read_config_dword(pdev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data);
|
|
pio_timing_data &= ~(0xFF << timing_shift);
|
|
pio_timing_data |= (pio_timings[pio] << timing_shift);
|
|
pci_write_config_dword(pdev, ATIIXP_IDE_PIO_TIMING, pio_timing_data);
|
|
}
|
|
|
|
/**
|
|
* atiixp_set_piomode - set initial PIO mode data
|
|
* @ap: ATA interface
|
|
* @adev: ATA device
|
|
*
|
|
* Called to do the PIO mode setup. We use a shared helper for this
|
|
* as the DMA setup must also adjust the PIO timing information.
|
|
*/
|
|
|
|
static void atiixp_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
atiixp_set_pio_timing(ap, adev, adev->pio_mode - XFER_PIO_0);
|
|
}
|
|
|
|
/**
|
|
* atiixp_set_dmamode - set initial DMA mode data
|
|
* @ap: ATA interface
|
|
* @adev: ATA device
|
|
*
|
|
* Called to do the DMA mode setup. We use timing tables for most
|
|
* modes but must tune an appropriate PIO mode to match.
|
|
*/
|
|
|
|
static void atiixp_set_dmamode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
static u8 mwdma_timings[5] = { 0x77, 0x21, 0x20 };
|
|
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
int dma = adev->dma_mode;
|
|
int dn = 2 * ap->port_no + adev->devno;
|
|
int wanted_pio;
|
|
|
|
if (adev->dma_mode >= XFER_UDMA_0) {
|
|
u16 udma_mode_data;
|
|
|
|
dma -= XFER_UDMA_0;
|
|
|
|
pci_read_config_word(pdev, ATIIXP_IDE_UDMA_MODE, &udma_mode_data);
|
|
udma_mode_data &= ~(0x7 << (4 * dn));
|
|
udma_mode_data |= dma << (4 * dn);
|
|
pci_write_config_word(pdev, ATIIXP_IDE_UDMA_MODE, udma_mode_data);
|
|
} else {
|
|
int timing_shift = (16 * ap->port_no) + 8 * (adev->devno ^ 1);
|
|
u32 mwdma_timing_data;
|
|
|
|
dma -= XFER_MW_DMA_0;
|
|
|
|
pci_read_config_dword(pdev, ATIIXP_IDE_MWDMA_TIMING,
|
|
&mwdma_timing_data);
|
|
mwdma_timing_data &= ~(0xFF << timing_shift);
|
|
mwdma_timing_data |= (mwdma_timings[dma] << timing_shift);
|
|
pci_write_config_dword(pdev, ATIIXP_IDE_MWDMA_TIMING,
|
|
mwdma_timing_data);
|
|
}
|
|
/*
|
|
* We must now look at the PIO mode situation. We may need to
|
|
* adjust the PIO mode to keep the timings acceptable
|
|
*/
|
|
if (adev->dma_mode >= XFER_MW_DMA_2)
|
|
wanted_pio = 4;
|
|
else if (adev->dma_mode == XFER_MW_DMA_1)
|
|
wanted_pio = 3;
|
|
else if (adev->dma_mode == XFER_MW_DMA_0)
|
|
wanted_pio = 0;
|
|
else BUG();
|
|
|
|
if (adev->pio_mode != wanted_pio)
|
|
atiixp_set_pio_timing(ap, adev, wanted_pio);
|
|
}
|
|
|
|
/**
|
|
* atiixp_bmdma_start - DMA start callback
|
|
* @qc: Command in progress
|
|
*
|
|
* When DMA begins we need to ensure that the UDMA control
|
|
* register for the channel is correctly set.
|
|
*
|
|
* Note: The host lock held by the libata layer protects
|
|
* us from two channels both trying to set DMA bits at once
|
|
*/
|
|
|
|
static void atiixp_bmdma_start(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct ata_device *adev = qc->dev;
|
|
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
int dn = (2 * ap->port_no) + adev->devno;
|
|
u16 tmp16;
|
|
|
|
pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16);
|
|
if (ata_using_udma(adev))
|
|
tmp16 |= (1 << dn);
|
|
else
|
|
tmp16 &= ~(1 << dn);
|
|
pci_write_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, tmp16);
|
|
ata_bmdma_start(qc);
|
|
}
|
|
|
|
/**
|
|
* atiixp_dma_stop - DMA stop callback
|
|
* @qc: Command in progress
|
|
*
|
|
* DMA has completed. Clear the UDMA flag as the next operations will
|
|
* be PIO ones not UDMA data transfer.
|
|
*
|
|
* Note: The host lock held by the libata layer protects
|
|
* us from two channels both trying to set DMA bits at once
|
|
*/
|
|
|
|
static void atiixp_bmdma_stop(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
int dn = (2 * ap->port_no) + qc->dev->devno;
|
|
u16 tmp16;
|
|
|
|
pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16);
|
|
tmp16 &= ~(1 << dn);
|
|
pci_write_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, tmp16);
|
|
ata_bmdma_stop(qc);
|
|
}
|
|
|
|
static struct scsi_host_template atiixp_sht = {
|
|
ATA_BMDMA_SHT(DRV_NAME),
|
|
.sg_tablesize = LIBATA_DUMB_MAX_PRD,
|
|
};
|
|
|
|
static struct ata_port_operations atiixp_port_ops = {
|
|
.inherits = &ata_bmdma_port_ops,
|
|
|
|
.qc_prep = ata_sff_dumb_qc_prep,
|
|
.bmdma_start = atiixp_bmdma_start,
|
|
.bmdma_stop = atiixp_bmdma_stop,
|
|
|
|
.cable_detect = atiixp_cable_detect,
|
|
.set_piomode = atiixp_set_piomode,
|
|
.set_dmamode = atiixp_set_dmamode,
|
|
};
|
|
|
|
static int atiixp_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
|
|
{
|
|
static const struct ata_port_info info = {
|
|
.flags = ATA_FLAG_SLAVE_POSS,
|
|
.pio_mask = ATA_PIO4,
|
|
.mwdma_mask = ATA_MWDMA12_ONLY,
|
|
.udma_mask = ATA_UDMA5,
|
|
.port_ops = &atiixp_port_ops
|
|
};
|
|
static const struct pci_bits atiixp_enable_bits[] = {
|
|
{ 0x48, 1, 0x01, 0x00 },
|
|
{ 0x48, 1, 0x08, 0x00 }
|
|
};
|
|
const struct ata_port_info *ppi[] = { &info, &info };
|
|
int i;
|
|
|
|
for (i = 0; i < 2; i++)
|
|
if (!pci_test_config_bits(pdev, &atiixp_enable_bits[i]))
|
|
ppi[i] = &ata_dummy_port_info;
|
|
|
|
return ata_pci_sff_init_one(pdev, ppi, &atiixp_sht, NULL);
|
|
}
|
|
|
|
static const struct pci_device_id atiixp[] = {
|
|
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP200_IDE), },
|
|
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP300_IDE), },
|
|
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), },
|
|
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), },
|
|
{ PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), },
|
|
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_HUDSON2_IDE), },
|
|
|
|
{ },
|
|
};
|
|
|
|
static struct pci_driver atiixp_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = atiixp,
|
|
.probe = atiixp_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
#ifdef CONFIG_PM
|
|
.resume = ata_pci_device_resume,
|
|
.suspend = ata_pci_device_suspend,
|
|
#endif
|
|
};
|
|
|
|
static int __init atiixp_init(void)
|
|
{
|
|
return pci_register_driver(&atiixp_pci_driver);
|
|
}
|
|
|
|
|
|
static void __exit atiixp_exit(void)
|
|
{
|
|
pci_unregister_driver(&atiixp_pci_driver);
|
|
}
|
|
|
|
MODULE_AUTHOR("Alan Cox");
|
|
MODULE_DESCRIPTION("low-level driver for ATI IXP200/300/400");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, atiixp);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
module_init(atiixp_init);
|
|
module_exit(atiixp_exit);
|