mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-27 22:53:55 +08:00
0ea04c7322
Add a description of the External Interrupt Unit (EXIU) interrupt controller as found on the Socionext SynQuacer SoC. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
33 lines
1.1 KiB
Plaintext
33 lines
1.1 KiB
Plaintext
Socionext SynQuacer External Interrupt Unit (EXIU)
|
|
|
|
The Socionext Synquacer SoC has an external interrupt unit (EXIU)
|
|
that forwards a block of 32 configurable input lines to 32 adjacent
|
|
level-high type GICv3 SPIs.
|
|
|
|
Required properties:
|
|
|
|
- compatible : Should be "socionext,synquacer-exiu".
|
|
- reg : Specifies base physical address and size of the
|
|
control registers.
|
|
- interrupt-controller : Identifies the node as an interrupt controller.
|
|
- #interrupt-cells : Specifies the number of cells needed to encode an
|
|
interrupt source. The value must be 3.
|
|
- interrupt-parent : phandle of the GIC these interrupts are routed to.
|
|
- socionext,spi-base : The SPI number of the first SPI of the 32 adjacent
|
|
ones the EXIU forwards its interrups to.
|
|
|
|
Notes:
|
|
|
|
- Only SPIs can use the EXIU as an interrupt parent.
|
|
|
|
Example:
|
|
|
|
exiu: interrupt-controller@510c0000 {
|
|
compatible = "socionext,synquacer-exiu";
|
|
reg = <0x0 0x510c0000 0x0 0x20>;
|
|
interrupt-controller;
|
|
interrupt-parent = <&gic>;
|
|
#interrupt-cells = <3>;
|
|
socionext,spi-base = <112>;
|
|
};
|