2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-25 13:43:55 +08:00
linux-next/drivers/ata/pata_acpi.c
Aaron Lu f1bc1e4c44 ata: acpi: rework the ata acpi bind support
Binding ACPI handle to SCSI device has several drawbacks, namely:
1 During ATA device initialization time, ACPI handle will be needed
  while SCSI devices are not created yet. So each time ACPI handle is
  needed, instead of retrieving the handle by ACPI_HANDLE macro,
  a namespace scan is performed to find the handle for the corresponding
  ATA device. This is inefficient, and also expose a restriction on
  calling path not holding any lock.
2 The binding to SCSI device tree makes code complex, while at the same
  time doesn't bring us any benefit. All ACPI handlings are still done
  in ATA module, not in SCSI.

Rework the ATA ACPI binding code to bind ACPI handle to ATA transport
devices(ATA port and ATA device). The binding needs to be done only once,
since the ATA transport devices do not go away with hotplug. And due to
this, the flush_work call in hotplug handler for ATA bay is no longer
needed.

Tested on an Intel test platform for binding and runtime power off for
ODD(ZPODD) and hard disk; on an ASUS S400C for binding and normal boot
and S3, where its SATA port node has _SDD and _GTF control methods when
configured as an AHCI controller and its PATA device node has _GTF
control method when configured as an IDE controller. SATA PMP binding
and ATA hotplug is not tested.

Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Tested-by: Dirk Griesbach <spamthis@freenet.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
2013-08-23 12:09:23 -04:00

283 lines
6.6 KiB
C

/*
* ACPI PATA driver
*
* (c) 2007 Red Hat
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/gfp.h>
#include <scsi/scsi_host.h>
#include <acpi/acpi_bus.h>
#include <linux/libata.h>
#include <linux/ata.h>
#define DRV_NAME "pata_acpi"
#define DRV_VERSION "0.2.3"
struct pata_acpi {
struct ata_acpi_gtm gtm;
void *last;
unsigned long mask[2];
};
/**
* pacpi_pre_reset - check for 40/80 pin
* @ap: Port
* @deadline: deadline jiffies for the operation
*
* Perform the PATA port setup we need.
*/
static int pacpi_pre_reset(struct ata_link *link, unsigned long deadline)
{
struct ata_port *ap = link->ap;
struct pata_acpi *acpi = ap->private_data;
if (ACPI_HANDLE(&ap->tdev) == NULL || ata_acpi_gtm(ap, &acpi->gtm) < 0)
return -ENODEV;
return ata_sff_prereset(link, deadline);
}
/**
* pacpi_cable_detect - cable type detection
* @ap: port to detect
*
* Perform device specific cable detection
*/
static int pacpi_cable_detect(struct ata_port *ap)
{
struct pata_acpi *acpi = ap->private_data;
if ((acpi->mask[0] | acpi->mask[1]) & (0xF8 << ATA_SHIFT_UDMA))
return ATA_CBL_PATA80;
else
return ATA_CBL_PATA40;
}
/**
* pacpi_discover_modes - filter non ACPI modes
* @adev: ATA device
* @mask: proposed modes
*
* Try the modes available and see which ones the ACPI method will
* set up sensibly. From this we get a mask of ACPI modes we can use
*/
static unsigned long pacpi_discover_modes(struct ata_port *ap, struct ata_device *adev)
{
struct pata_acpi *acpi = ap->private_data;
struct ata_acpi_gtm probe;
unsigned int xfer_mask;
probe = acpi->gtm;
ata_acpi_gtm(ap, &probe);
xfer_mask = ata_acpi_gtm_xfermask(adev, &probe);
if (xfer_mask & (0xF8 << ATA_SHIFT_UDMA))
ap->cbl = ATA_CBL_PATA80;
return xfer_mask;
}
/**
* pacpi_mode_filter - mode filter for ACPI
* @adev: device
* @mask: mask of valid modes
*
* Filter the valid mode list according to our own specific rules, in
* this case the list of discovered valid modes obtained by ACPI probing
*/
static unsigned long pacpi_mode_filter(struct ata_device *adev, unsigned long mask)
{
struct pata_acpi *acpi = adev->link->ap->private_data;
return mask & acpi->mask[adev->devno];
}
/**
* pacpi_set_piomode - set initial PIO mode data
* @ap: ATA interface
* @adev: ATA device
*/
static void pacpi_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
int unit = adev->devno;
struct pata_acpi *acpi = ap->private_data;
const struct ata_timing *t;
if (!(acpi->gtm.flags & 0x10))
unit = 0;
/* Now stuff the nS values into the structure */
t = ata_timing_find_mode(adev->pio_mode);
acpi->gtm.drive[unit].pio = t->cycle;
ata_acpi_stm(ap, &acpi->gtm);
/* See what mode we actually got */
ata_acpi_gtm(ap, &acpi->gtm);
}
/**
* pacpi_set_dmamode - set initial DMA mode data
* @ap: ATA interface
* @adev: ATA device
*/
static void pacpi_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
int unit = adev->devno;
struct pata_acpi *acpi = ap->private_data;
const struct ata_timing *t;
if (!(acpi->gtm.flags & 0x10))
unit = 0;
/* Now stuff the nS values into the structure */
t = ata_timing_find_mode(adev->dma_mode);
if (adev->dma_mode >= XFER_UDMA_0) {
acpi->gtm.drive[unit].dma = t->udma;
acpi->gtm.flags |= (1 << (2 * unit));
} else {
acpi->gtm.drive[unit].dma = t->cycle;
acpi->gtm.flags &= ~(1 << (2 * unit));
}
ata_acpi_stm(ap, &acpi->gtm);
/* See what mode we actually got */
ata_acpi_gtm(ap, &acpi->gtm);
}
/**
* pacpi_qc_issue - command issue
* @qc: command pending
*
* Called when the libata layer is about to issue a command. We wrap
* this interface so that we can load the correct ATA timings if
* necessary.
*/
static unsigned int pacpi_qc_issue(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct ata_device *adev = qc->dev;
struct pata_acpi *acpi = ap->private_data;
if (acpi->gtm.flags & 0x10)
return ata_bmdma_qc_issue(qc);
if (adev != acpi->last) {
pacpi_set_piomode(ap, adev);
if (ata_dma_enabled(adev))
pacpi_set_dmamode(ap, adev);
acpi->last = adev;
}
return ata_bmdma_qc_issue(qc);
}
/**
* pacpi_port_start - port setup
* @ap: ATA port being set up
*
* Use the port_start hook to maintain private control structures
*/
static int pacpi_port_start(struct ata_port *ap)
{
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
struct pata_acpi *acpi;
if (ACPI_HANDLE(&ap->tdev) == NULL)
return -ENODEV;
acpi = ap->private_data = devm_kzalloc(&pdev->dev, sizeof(struct pata_acpi), GFP_KERNEL);
if (ap->private_data == NULL)
return -ENOMEM;
acpi->mask[0] = pacpi_discover_modes(ap, &ap->link.device[0]);
acpi->mask[1] = pacpi_discover_modes(ap, &ap->link.device[1]);
return ata_bmdma_port_start(ap);
}
static struct scsi_host_template pacpi_sht = {
ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations pacpi_ops = {
.inherits = &ata_bmdma_port_ops,
.qc_issue = pacpi_qc_issue,
.cable_detect = pacpi_cable_detect,
.mode_filter = pacpi_mode_filter,
.set_piomode = pacpi_set_piomode,
.set_dmamode = pacpi_set_dmamode,
.prereset = pacpi_pre_reset,
.port_start = pacpi_port_start,
};
/**
* pacpi_init_one - Register ACPI ATA PCI device with kernel services
* @pdev: PCI device to register
* @ent: Entry in pacpi_pci_tbl matching with @pdev
*
* Called from kernel PCI layer.
*
* LOCKING:
* Inherited from PCI layer (may sleep).
*
* RETURNS:
* Zero on success, or -ERRNO value.
*/
static int pacpi_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
{
static const struct ata_port_info info = {
.flags = ATA_FLAG_SLAVE_POSS,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA6,
.port_ops = &pacpi_ops,
};
const struct ata_port_info *ppi[] = { &info, NULL };
if (pdev->vendor == PCI_VENDOR_ID_ATI) {
int rc = pcim_enable_device(pdev);
if (rc < 0)
return rc;
pcim_pin_device(pdev);
}
return ata_pci_bmdma_init_one(pdev, ppi, &pacpi_sht, NULL, 0);
}
static const struct pci_device_id pacpi_pci_tbl[] = {
{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 1},
{ } /* terminate list */
};
static struct pci_driver pacpi_pci_driver = {
.name = DRV_NAME,
.id_table = pacpi_pci_tbl,
.probe = pacpi_init_one,
.remove = ata_pci_remove_one,
#ifdef CONFIG_PM
.suspend = ata_pci_device_suspend,
.resume = ata_pci_device_resume,
#endif
};
module_pci_driver(pacpi_pci_driver);
MODULE_AUTHOR("Alan Cox");
MODULE_DESCRIPTION("SCSI low-level driver for ATA in ACPI mode");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, pacpi_pci_tbl);
MODULE_VERSION(DRV_VERSION);