2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-22 20:23:57 +08:00
linux-next/arch/arm/mach-pxa
Mark Brown 80748fb8ff [ARM] pxa: register AC97 controller devices
The tosa, e740, e750, e800 and mioa701 all use AC97 audio codecs
but does not register the platform device for the AC97 controller.
Doing so is now required by ASoC.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Acked-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-04 21:54:40 +08:00
..
include/mach [ARM] pxa/colibri: get rid of set_irq_type() 2009-04-04 10:26:34 +08:00
am200epd.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
am300epd.c [ARM] 5354/1: mach-pxa: add AM300 platform driver v3 2009-02-10 11:28:00 +00:00
clock.c [ARM] pxa: make second argument of clk_add_alias a name instead of the device 2009-03-19 16:20:39 +08:00
clock.h [ARM] pxa: make second argument of clk_add_alias a name instead of the device 2009-03-19 16:20:39 +08:00
cm-x2xx-pci.c [ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h 2009-03-09 21:22:38 +08:00
cm-x2xx-pci.h [ARM] 5280/1: pxa: prepare cm-x2xx.c and cm-x2xx-pci.[ch] for addition of CM-X255 2008-10-07 12:05:05 +01:00
cm-x2xx.c [ARM] pxa/cm-x2xx: fix ucb1400 not being registered 2009-04-04 10:26:34 +08:00
cm-x255.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
cm-x270.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
cm-x300.c [ARM] pxa: add DM9000_PLATF_NO_EEPROM flag to CM-X... platforms 2009-03-09 21:22:40 +08:00
colibri-pxa3xx.c [ARM] pxa/colibri: provide MAC address from ATAG_SERIAL 2009-04-04 10:26:34 +08:00
colibri-pxa270.c [ARM] pxa: rename colibri.c to colibri-pxa270.c 2009-03-23 09:57:54 +08:00
colibri-pxa300.c [ARM] pxa/colibri: get rid of set_irq_type() 2009-04-04 10:26:34 +08:00
colibri-pxa320.c [ARM] pxa/colibri: get rid of set_irq_type() 2009-04-04 10:26:34 +08:00
corgi_lcd.c [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
corgi_pm.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
corgi_ssp.c [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
corgi.c [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
cpufreq-pxa2xx.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
cpufreq-pxa3xx.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
csb701.c [ARM] pxa/csb701: do not register devices on non-csb726 boads 2009-04-04 10:26:35 +08:00
csb726.c [ARM] pxa: add initial support for Cogent CSB726 board 2009-03-13 17:10:44 +08:00
devices.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
devices.h [ARM] pxa: add resources for incoming rtc-pxa driver 2008-12-02 14:43:47 +08:00
e330.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
e350.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
e400.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
e740.c [ARM] pxa: register AC97 controller devices 2009-04-04 21:54:40 +08:00
e750.c [ARM] pxa: register AC97 controller devices 2009-04-04 21:54:40 +08:00
e800.c [ARM] pxa: register AC97 controller devices 2009-04-04 21:54:40 +08:00
em-x270.c [ARM] pxa/em-x270: add libertas device registration 2009-04-04 08:24:39 +08:00
eseries.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
eseries.h [ARM] pxa: Add multi-io support for e-series 2008-12-15 03:29:34 +00:00
ezx.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
generic.c [ARM] pxa: move GPIO register definitions into <mach/gpio.h> 2009-03-09 21:22:37 +08:00
generic.h [ARM] pxa: move declaration of 'pxa_last_gpio' into <mach/gpio.h> 2009-03-09 21:22:37 +08:00
gumstix.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
h5000.c Merge branch 'origin' into devel 2009-03-28 20:29:51 +00:00
himalaya.c [ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h 2009-03-09 21:22:38 +08:00
idp.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
imote2.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
irq.c [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
Kconfig [ARM] pxa: Palm Tungsten E2 basic support 2009-04-04 10:26:33 +08:00
leds-idp.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
leds-lubbock.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
leds-mainstone.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
leds.c [ARM] 5251/1: remove old LED support for Trizeps4 SOM 2008-10-01 22:34:34 +01:00
leds.h fix file specification in comments 2006-10-03 23:01:26 +02:00
littleton.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
lpd270.c [ARM] pxa: move GPIO register definitions into <mach/gpio.h> 2009-03-09 21:22:37 +08:00
lubbock.c [ARM] pxa: make lubbock specific debugging stuffs back into lubbock.c 2009-03-09 21:22:40 +08:00
magician.c [ARM] pxa/magician: Enable bq24022 regulator for gpio_vbus and pda_power 2009-04-04 08:24:38 +08:00
mainstone.c [ARM] pxa: move GPIO register definitions into <mach/gpio.h> 2009-03-09 21:22:37 +08:00
Makefile [ARM] pxa: Palm Tungsten E2 basic support 2009-04-04 10:26:33 +08:00
Makefile.boot Linux-2.6.12-rc2 2005-04-16 15:20:36 -07:00
mfp-pxa2xx.c [ARM] pxa: access GPIO registers by chip so to make it further generic 2009-03-09 21:22:38 +08:00
mfp-pxa3xx.c [ARM] pxa: move common MFP handling code into plat-pxa 2009-03-23 10:11:34 +08:00
mioa701_bootresume.S [ARM] pxa/MioA701: fix memory corruption. 2008-11-22 20:57:21 +08:00
mioa701.c [ARM] pxa: register AC97 controller devices 2009-04-04 21:54:40 +08:00
mp900.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
palmld.c [ARM] pxa: Add support for suspend on PalmTX, T5 and LD 2009-04-04 10:26:34 +08:00
palmt5.c [ARM] pxa: Add support for suspend on PalmTX, T5 and LD 2009-04-04 10:26:34 +08:00
palmte2.c [ARM] pxa: PalmTE2 support for battery, UDC, IrDA and backlight 2009-04-04 10:26:33 +08:00
palmtx.c [ARM] pxa: Add support for suspend on PalmTX, T5 and LD 2009-04-04 10:26:34 +08:00
palmz72.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
pcm027.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
pcm990-baseboard.c V4L/DVB (11034): soc-camera: remove now unused gpio member of struct soc_camera_link 2009-03-30 12:43:22 -03:00
pm.c [ARM] pxa: make lubbock specific debugging stuffs back into lubbock.c 2009-03-09 21:22:40 +08:00
poodle.c [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
pwm.c [ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h 2009-03-09 21:22:38 +08:00
pxa2xx.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
pxa3xx.c [ARM] pxa: move IRQ handling of GPIO 0 and 1 outside of gpio.c 2009-03-09 21:22:37 +08:00
pxa25x.c [ARM] pxa: move IRQ handling of GPIO 0 and 1 outside of gpio.c 2009-03-09 21:22:37 +08:00
pxa27x.c [ARM] pxa: move IRQ handling of GPIO 0 and 1 outside of gpio.c 2009-03-09 21:22:37 +08:00
pxa300.c [ARM] pxa: move common MFP handling code into plat-pxa 2009-03-23 10:11:34 +08:00
pxa320.c [ARM] pxa: move common MFP handling code into plat-pxa 2009-03-23 10:11:34 +08:00
pxa930.c [ARM] pxa: move common MFP handling code into plat-pxa 2009-03-23 10:11:34 +08:00
reset.c [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
saar.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
sharpsl_pm.c [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
sharpsl.h [ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix 2008-01-28 13:13:25 +00:00
sleep.S [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
smemc.c [ARM] pxa: avoid polluting the kernel's namespace 2008-11-28 16:04:54 +00:00
spitz_pm.c [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
spitz.c Merge branch 'origin' into devel 2009-03-28 20:29:51 +00:00
ssp.c [ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h 2009-03-09 21:22:38 +08:00
standby.S [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
tavorevb.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
time.c [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
tosa-bt.c [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach 2008-08-07 09:55:48 +01:00
tosa.c [ARM] pxa: register AC97 controller devices 2009-04-04 21:54:40 +08:00
trizeps4.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
viper.c [ARM] pxa: move PCMCIA definitions out of pxa-regs.h into pxa2xx_base.c 2009-03-09 21:22:39 +08:00
zylonite_pxa300.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
zylonite_pxa320.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
zylonite.c [ARM] pxa: use <linux/gpio.h> instead of unnecessary <mach/gpio.h> 2008-12-02 14:42:37 +08:00