mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-27 14:43:58 +08:00
d883f52e1f
The new USBDEVFS_DROP_PRIVILEGES ioctl allows a process to voluntarily
relinquish the ability to issue other ioctls that may interfere with
other processes and drivers that have claimed an interface on the
device.
This commit also includes a simple utility to be able to test the
ioctl, located at Documentation/usb/usbdevfs-drop-permissions.c
Example (with qemu-kvm's input device):
$ lsusb
...
Bus 001 Device 002: ID 0627:0001 Adomax Technology Co., Ltd
$ usb-devices
...
C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=02 Driver=usbhid
$ sudo ./usbdevfs-drop-permissions /dev/bus/usb/001/002
OK: privileges dropped!
Available options:
[0] Exit now
[1] Reset device. Should fail if device is in use
[2] Claim 4 interfaces. Should succeed where not in use
[3] Narrow interface permission mask
Which option shall I run?: 1
ERROR: USBDEVFS_RESET failed! (1 - Operation not permitted)
Which test shall I run next?: 2
ERROR claiming if 0 (1 - Operation not permitted)
ERROR claiming if 1 (1 - Operation not permitted)
ERROR claiming if 2 (1 - Operation not permitted)
ERROR claiming if 3 (1 - Operation not permitted)
Which test shall I run next?: 0
After unbinding usbhid:
$ usb-devices
...
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=02 Driver=(none)
$ sudo ./usbdevfs-drop-permissions /dev/bus/usb/001/002
...
Which option shall I run?: 2
OK: claimed if 0
ERROR claiming if 1 (1 - Operation not permitted)
ERROR claiming if 2 (1 - Operation not permitted)
ERROR claiming if 3 (1 - Operation not permitted)
Which test shall I run next?: 1
OK: USBDEVFS_RESET succeeded
Which test shall I run next?: 0
After unbinding usbhid and restricting the mask:
$ sudo ./usbdevfs-drop-permissions /dev/bus/usb/001/002
...
Which option shall I run?: 3
Insert new mask: 0
OK: privileges dropped!
Which test shall I run next?: 2
ERROR claiming if 0 (1 - Operation not permitted)
ERROR claiming if 1 (1 - Operation not permitted)
ERROR claiming if 2 (1 - Operation not permitted)
ERROR claiming if 3 (1 - Operation not permitted)
Signed-off-by: Reilly Grant <reillyg@chromium.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Emilio López <emilio.lopez@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
993 lines
39 KiB
XML
993 lines
39 KiB
XML
<?xml version="1.0" encoding="UTF-8"?>
|
|
<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
|
|
"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
|
|
|
|
<book id="Linux-USB-API">
|
|
<bookinfo>
|
|
<title>The Linux-USB Host Side API</title>
|
|
|
|
<legalnotice>
|
|
<para>
|
|
This documentation is free software; you can redistribute
|
|
it and/or modify it under the terms of the GNU General Public
|
|
License as published by the Free Software Foundation; either
|
|
version 2 of the License, or (at your option) any later
|
|
version.
|
|
</para>
|
|
|
|
<para>
|
|
This program is distributed in the hope that it will be
|
|
useful, but WITHOUT ANY WARRANTY; without even the implied
|
|
warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
|
See the GNU General Public License for more details.
|
|
</para>
|
|
|
|
<para>
|
|
You should have received a copy of the GNU General Public
|
|
License along with this program; if not, write to the Free
|
|
Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
MA 02111-1307 USA
|
|
</para>
|
|
|
|
<para>
|
|
For more details see the file COPYING in the source
|
|
distribution of Linux.
|
|
</para>
|
|
</legalnotice>
|
|
</bookinfo>
|
|
|
|
<toc></toc>
|
|
|
|
<chapter id="intro">
|
|
<title>Introduction to USB on Linux</title>
|
|
|
|
<para>A Universal Serial Bus (USB) is used to connect a host,
|
|
such as a PC or workstation, to a number of peripheral
|
|
devices. USB uses a tree structure, with the host as the
|
|
root (the system's master), hubs as interior nodes, and
|
|
peripherals as leaves (and slaves).
|
|
Modern PCs support several such trees of USB devices, usually
|
|
one USB 2.0 tree (480 Mbit/sec each) with
|
|
a few USB 1.1 trees (12 Mbit/sec each) that are used when you
|
|
connect a USB 1.1 device directly to the machine's "root hub".
|
|
</para>
|
|
|
|
<para>That master/slave asymmetry was designed-in for a number of
|
|
reasons, one being ease of use. It is not physically possible to
|
|
assemble (legal) USB cables incorrectly: all upstream "to the host"
|
|
connectors are the rectangular type (matching the sockets on
|
|
root hubs), and all downstream connectors are the squarish type
|
|
(or they are built into the peripheral).
|
|
Also, the host software doesn't need to deal with distributed
|
|
auto-configuration since the pre-designated master node manages all that.
|
|
And finally, at the electrical level, bus protocol overhead is reduced by
|
|
eliminating arbitration and moving scheduling into the host software.
|
|
</para>
|
|
|
|
<para>USB 1.0 was announced in January 1996 and was revised
|
|
as USB 1.1 (with improvements in hub specification and
|
|
support for interrupt-out transfers) in September 1998.
|
|
USB 2.0 was released in April 2000, adding high-speed
|
|
transfers and transaction-translating hubs (used for USB 1.1
|
|
and 1.0 backward compatibility).
|
|
</para>
|
|
|
|
<para>Kernel developers added USB support to Linux early in the 2.2 kernel
|
|
series, shortly before 2.3 development forked. Updates from 2.3 were
|
|
regularly folded back into 2.2 releases, which improved reliability and
|
|
brought <filename>/sbin/hotplug</filename> support as well more drivers.
|
|
Such improvements were continued in the 2.5 kernel series, where they added
|
|
USB 2.0 support, improved performance, and made the host controller drivers
|
|
(HCDs) more consistent. They also simplified the API (to make bugs less
|
|
likely) and added internal "kerneldoc" documentation.
|
|
</para>
|
|
|
|
<para>Linux can run inside USB devices as well as on
|
|
the hosts that control the devices.
|
|
But USB device drivers running inside those peripherals
|
|
don't do the same things as the ones running inside hosts,
|
|
so they've been given a different name:
|
|
<emphasis>gadget drivers</emphasis>.
|
|
This document does not cover gadget drivers.
|
|
</para>
|
|
|
|
</chapter>
|
|
|
|
<chapter id="host">
|
|
<title>USB Host-Side API Model</title>
|
|
|
|
<para>Host-side drivers for USB devices talk to the "usbcore" APIs.
|
|
There are two. One is intended for
|
|
<emphasis>general-purpose</emphasis> drivers (exposed through
|
|
driver frameworks), and the other is for drivers that are
|
|
<emphasis>part of the core</emphasis>.
|
|
Such core drivers include the <emphasis>hub</emphasis> driver
|
|
(which manages trees of USB devices) and several different kinds
|
|
of <emphasis>host controller drivers</emphasis>,
|
|
which control individual busses.
|
|
</para>
|
|
|
|
<para>The device model seen by USB drivers is relatively complex.
|
|
</para>
|
|
|
|
<itemizedlist>
|
|
|
|
<listitem><para>USB supports four kinds of data transfers
|
|
(control, bulk, interrupt, and isochronous). Two of them (control
|
|
and bulk) use bandwidth as it's available,
|
|
while the other two (interrupt and isochronous)
|
|
are scheduled to provide guaranteed bandwidth.
|
|
</para></listitem>
|
|
|
|
<listitem><para>The device description model includes one or more
|
|
"configurations" per device, only one of which is active at a time.
|
|
Devices that are capable of high-speed operation must also support
|
|
full-speed configurations, along with a way to ask about the
|
|
"other speed" configurations which might be used.
|
|
</para></listitem>
|
|
|
|
<listitem><para>Configurations have one or more "interfaces", each
|
|
of which may have "alternate settings". Interfaces may be
|
|
standardized by USB "Class" specifications, or may be specific to
|
|
a vendor or device.</para>
|
|
|
|
<para>USB device drivers actually bind to interfaces, not devices.
|
|
Think of them as "interface drivers", though you
|
|
may not see many devices where the distinction is important.
|
|
<emphasis>Most USB devices are simple, with only one configuration,
|
|
one interface, and one alternate setting.</emphasis>
|
|
</para></listitem>
|
|
|
|
<listitem><para>Interfaces have one or more "endpoints", each of
|
|
which supports one type and direction of data transfer such as
|
|
"bulk out" or "interrupt in". The entire configuration may have
|
|
up to sixteen endpoints in each direction, allocated as needed
|
|
among all the interfaces.
|
|
</para></listitem>
|
|
|
|
<listitem><para>Data transfer on USB is packetized; each endpoint
|
|
has a maximum packet size.
|
|
Drivers must often be aware of conventions such as flagging the end
|
|
of bulk transfers using "short" (including zero length) packets.
|
|
</para></listitem>
|
|
|
|
<listitem><para>The Linux USB API supports synchronous calls for
|
|
control and bulk messages.
|
|
It also supports asynchronous calls for all kinds of data transfer,
|
|
using request structures called "URBs" (USB Request Blocks).
|
|
</para></listitem>
|
|
|
|
</itemizedlist>
|
|
|
|
<para>Accordingly, the USB Core API exposed to device drivers
|
|
covers quite a lot of territory. You'll probably need to consult
|
|
the USB 2.0 specification, available online from www.usb.org at
|
|
no cost, as well as class or device specifications.
|
|
</para>
|
|
|
|
<para>The only host-side drivers that actually touch hardware
|
|
(reading/writing registers, handling IRQs, and so on) are the HCDs.
|
|
In theory, all HCDs provide the same functionality through the same
|
|
API. In practice, that's becoming more true on the 2.5 kernels,
|
|
but there are still differences that crop up especially with
|
|
fault handling. Different controllers don't necessarily report
|
|
the same aspects of failures, and recovery from faults (including
|
|
software-induced ones like unlinking an URB) isn't yet fully
|
|
consistent.
|
|
Device driver authors should make a point of doing disconnect
|
|
testing (while the device is active) with each different host
|
|
controller driver, to make sure drivers don't have bugs of
|
|
their own as well as to make sure they aren't relying on some
|
|
HCD-specific behavior.
|
|
(You will need external USB 1.1 and/or
|
|
USB 2.0 hubs to perform all those tests.)
|
|
</para>
|
|
|
|
</chapter>
|
|
|
|
<chapter id="types"><title>USB-Standard Types</title>
|
|
|
|
<para>In <filename><linux/usb/ch9.h></filename> you will find
|
|
the USB data types defined in chapter 9 of the USB specification.
|
|
These data types are used throughout USB, and in APIs including
|
|
this host side API, gadget APIs, and usbfs.
|
|
</para>
|
|
|
|
!Iinclude/linux/usb/ch9.h
|
|
|
|
</chapter>
|
|
|
|
<chapter id="hostside"><title>Host-Side Data Types and Macros</title>
|
|
|
|
<para>The host side API exposes several layers to drivers, some of
|
|
which are more necessary than others.
|
|
These support lifecycle models for host side drivers
|
|
and devices, and support passing buffers through usbcore to
|
|
some HCD that performs the I/O for the device driver.
|
|
</para>
|
|
|
|
|
|
!Iinclude/linux/usb.h
|
|
|
|
</chapter>
|
|
|
|
<chapter id="usbcore"><title>USB Core APIs</title>
|
|
|
|
<para>There are two basic I/O models in the USB API.
|
|
The most elemental one is asynchronous: drivers submit requests
|
|
in the form of an URB, and the URB's completion callback
|
|
handle the next step.
|
|
All USB transfer types support that model, although there
|
|
are special cases for control URBs (which always have setup
|
|
and status stages, but may not have a data stage) and
|
|
isochronous URBs (which allow large packets and include
|
|
per-packet fault reports).
|
|
Built on top of that is synchronous API support, where a
|
|
driver calls a routine that allocates one or more URBs,
|
|
submits them, and waits until they complete.
|
|
There are synchronous wrappers for single-buffer control
|
|
and bulk transfers (which are awkward to use in some
|
|
driver disconnect scenarios), and for scatterlist based
|
|
streaming i/o (bulk or interrupt).
|
|
</para>
|
|
|
|
<para>USB drivers need to provide buffers that can be
|
|
used for DMA, although they don't necessarily need to
|
|
provide the DMA mapping themselves.
|
|
There are APIs to use used when allocating DMA buffers,
|
|
which can prevent use of bounce buffers on some systems.
|
|
In some cases, drivers may be able to rely on 64bit DMA
|
|
to eliminate another kind of bounce buffer.
|
|
</para>
|
|
|
|
!Edrivers/usb/core/urb.c
|
|
!Edrivers/usb/core/message.c
|
|
!Edrivers/usb/core/file.c
|
|
!Edrivers/usb/core/driver.c
|
|
!Edrivers/usb/core/usb.c
|
|
!Edrivers/usb/core/hub.c
|
|
</chapter>
|
|
|
|
<chapter id="hcd"><title>Host Controller APIs</title>
|
|
|
|
<para>These APIs are only for use by host controller drivers,
|
|
most of which implement standard register interfaces such as
|
|
EHCI, OHCI, or UHCI.
|
|
UHCI was one of the first interfaces, designed by Intel and
|
|
also used by VIA; it doesn't do much in hardware.
|
|
OHCI was designed later, to have the hardware do more work
|
|
(bigger transfers, tracking protocol state, and so on).
|
|
EHCI was designed with USB 2.0; its design has features that
|
|
resemble OHCI (hardware does much more work) as well as
|
|
UHCI (some parts of ISO support, TD list processing).
|
|
</para>
|
|
|
|
<para>There are host controllers other than the "big three",
|
|
although most PCI based controllers (and a few non-PCI based
|
|
ones) use one of those interfaces.
|
|
Not all host controllers use DMA; some use PIO, and there
|
|
is also a simulator.
|
|
</para>
|
|
|
|
<para>The same basic APIs are available to drivers for all
|
|
those controllers.
|
|
For historical reasons they are in two layers:
|
|
<structname>struct usb_bus</structname> is a rather thin
|
|
layer that became available in the 2.2 kernels, while
|
|
<structname>struct usb_hcd</structname> is a more featureful
|
|
layer (available in later 2.4 kernels and in 2.5) that
|
|
lets HCDs share common code, to shrink driver size
|
|
and significantly reduce hcd-specific behaviors.
|
|
</para>
|
|
|
|
!Edrivers/usb/core/hcd.c
|
|
!Edrivers/usb/core/hcd-pci.c
|
|
!Idrivers/usb/core/buffer.c
|
|
</chapter>
|
|
|
|
<chapter id="usbfs">
|
|
<title>The USB Filesystem (usbfs)</title>
|
|
|
|
<para>This chapter presents the Linux <emphasis>usbfs</emphasis>.
|
|
You may prefer to avoid writing new kernel code for your
|
|
USB driver; that's the problem that usbfs set out to solve.
|
|
User mode device drivers are usually packaged as applications
|
|
or libraries, and may use usbfs through some programming library
|
|
that wraps it. Such libraries include
|
|
<ulink url="http://libusb.sourceforge.net">libusb</ulink>
|
|
for C/C++, and
|
|
<ulink url="http://jUSB.sourceforge.net">jUSB</ulink> for Java.
|
|
</para>
|
|
|
|
<note><title>Unfinished</title>
|
|
<para>This particular documentation is incomplete,
|
|
especially with respect to the asynchronous mode.
|
|
As of kernel 2.5.66 the code and this (new) documentation
|
|
need to be cross-reviewed.
|
|
</para>
|
|
</note>
|
|
|
|
<para>Configure usbfs into Linux kernels by enabling the
|
|
<emphasis>USB filesystem</emphasis> option (CONFIG_USB_DEVICEFS),
|
|
and you get basic support for user mode USB device drivers.
|
|
Until relatively recently it was often (confusingly) called
|
|
<emphasis>usbdevfs</emphasis> although it wasn't solving what
|
|
<emphasis>devfs</emphasis> was.
|
|
Every USB device will appear in usbfs, regardless of whether or
|
|
not it has a kernel driver.
|
|
</para>
|
|
|
|
<sect1 id="usbfs-files">
|
|
<title>What files are in "usbfs"?</title>
|
|
|
|
<para>Conventionally mounted at
|
|
<filename>/proc/bus/usb</filename>, usbfs
|
|
features include:
|
|
<itemizedlist>
|
|
<listitem><para><filename>/proc/bus/usb/devices</filename>
|
|
... a text file
|
|
showing each of the USB devices on known to the kernel,
|
|
and their configuration descriptors.
|
|
You can also poll() this to learn about new devices.
|
|
</para></listitem>
|
|
<listitem><para><filename>/proc/bus/usb/BBB/DDD</filename>
|
|
... magic files
|
|
exposing the each device's configuration descriptors, and
|
|
supporting a series of ioctls for making device requests,
|
|
including I/O to devices. (Purely for access by programs.)
|
|
</para></listitem>
|
|
</itemizedlist>
|
|
</para>
|
|
|
|
<para> Each bus is given a number (BBB) based on when it was
|
|
enumerated; within each bus, each device is given a similar
|
|
number (DDD).
|
|
Those BBB/DDD paths are not "stable" identifiers;
|
|
expect them to change even if you always leave the devices
|
|
plugged in to the same hub port.
|
|
<emphasis>Don't even think of saving these in application
|
|
configuration files.</emphasis>
|
|
Stable identifiers are available, for user mode applications
|
|
that want to use them. HID and networking devices expose
|
|
these stable IDs, so that for example you can be sure that
|
|
you told the right UPS to power down its second server.
|
|
"usbfs" doesn't (yet) expose those IDs.
|
|
</para>
|
|
|
|
</sect1>
|
|
|
|
<sect1 id="usbfs-fstab">
|
|
<title>Mounting and Access Control</title>
|
|
|
|
<para>There are a number of mount options for usbfs, which will
|
|
be of most interest to you if you need to override the default
|
|
access control policy.
|
|
That policy is that only root may read or write device files
|
|
(<filename>/proc/bus/BBB/DDD</filename>) although anyone may read
|
|
the <filename>devices</filename>
|
|
or <filename>drivers</filename> files.
|
|
I/O requests to the device also need the CAP_SYS_RAWIO capability,
|
|
</para>
|
|
|
|
<para>The significance of that is that by default, all user mode
|
|
device drivers need super-user privileges.
|
|
You can change modes or ownership in a driver setup
|
|
when the device hotplugs, or maye just start the
|
|
driver right then, as a privileged server (or some activity
|
|
within one).
|
|
That's the most secure approach for multi-user systems,
|
|
but for single user systems ("trusted" by that user)
|
|
it's more convenient just to grant everyone all access
|
|
(using the <emphasis>devmode=0666</emphasis> option)
|
|
so the driver can start whenever it's needed.
|
|
</para>
|
|
|
|
<para>The mount options for usbfs, usable in /etc/fstab or
|
|
in command line invocations of <emphasis>mount</emphasis>, are:
|
|
|
|
<variablelist>
|
|
<varlistentry>
|
|
<term><emphasis>busgid</emphasis>=NNNNN</term>
|
|
<listitem><para>Controls the GID used for the
|
|
/proc/bus/usb/BBB
|
|
directories. (Default: 0)</para></listitem></varlistentry>
|
|
<varlistentry><term><emphasis>busmode</emphasis>=MMM</term>
|
|
<listitem><para>Controls the file mode used for the
|
|
/proc/bus/usb/BBB
|
|
directories. (Default: 0555)
|
|
</para></listitem></varlistentry>
|
|
<varlistentry><term><emphasis>busuid</emphasis>=NNNNN</term>
|
|
<listitem><para>Controls the UID used for the
|
|
/proc/bus/usb/BBB
|
|
directories. (Default: 0)</para></listitem></varlistentry>
|
|
|
|
<varlistentry><term><emphasis>devgid</emphasis>=NNNNN</term>
|
|
<listitem><para>Controls the GID used for the
|
|
/proc/bus/usb/BBB/DDD
|
|
files. (Default: 0)</para></listitem></varlistentry>
|
|
<varlistentry><term><emphasis>devmode</emphasis>=MMM</term>
|
|
<listitem><para>Controls the file mode used for the
|
|
/proc/bus/usb/BBB/DDD
|
|
files. (Default: 0644)</para></listitem></varlistentry>
|
|
<varlistentry><term><emphasis>devuid</emphasis>=NNNNN</term>
|
|
<listitem><para>Controls the UID used for the
|
|
/proc/bus/usb/BBB/DDD
|
|
files. (Default: 0)</para></listitem></varlistentry>
|
|
|
|
<varlistentry><term><emphasis>listgid</emphasis>=NNNNN</term>
|
|
<listitem><para>Controls the GID used for the
|
|
/proc/bus/usb/devices and drivers files.
|
|
(Default: 0)</para></listitem></varlistentry>
|
|
<varlistentry><term><emphasis>listmode</emphasis>=MMM</term>
|
|
<listitem><para>Controls the file mode used for the
|
|
/proc/bus/usb/devices and drivers files.
|
|
(Default: 0444)</para></listitem></varlistentry>
|
|
<varlistentry><term><emphasis>listuid</emphasis>=NNNNN</term>
|
|
<listitem><para>Controls the UID used for the
|
|
/proc/bus/usb/devices and drivers files.
|
|
(Default: 0)</para></listitem></varlistentry>
|
|
</variablelist>
|
|
|
|
</para>
|
|
|
|
<para>Note that many Linux distributions hard-wire the mount options
|
|
for usbfs in their init scripts, such as
|
|
<filename>/etc/rc.d/rc.sysinit</filename>,
|
|
rather than making it easy to set this per-system
|
|
policy in <filename>/etc/fstab</filename>.
|
|
</para>
|
|
|
|
</sect1>
|
|
|
|
<sect1 id="usbfs-devices">
|
|
<title>/proc/bus/usb/devices</title>
|
|
|
|
<para>This file is handy for status viewing tools in user
|
|
mode, which can scan the text format and ignore most of it.
|
|
More detailed device status (including class and vendor
|
|
status) is available from device-specific files.
|
|
For information about the current format of this file,
|
|
see the
|
|
<filename>Documentation/usb/proc_usb_info.txt</filename>
|
|
file in your Linux kernel sources.
|
|
</para>
|
|
|
|
<para>This file, in combination with the poll() system call, can
|
|
also be used to detect when devices are added or removed:
|
|
<programlisting>int fd;
|
|
struct pollfd pfd;
|
|
|
|
fd = open("/proc/bus/usb/devices", O_RDONLY);
|
|
pfd = { fd, POLLIN, 0 };
|
|
for (;;) {
|
|
/* The first time through, this call will return immediately. */
|
|
poll(&pfd, 1, -1);
|
|
|
|
/* To see what's changed, compare the file's previous and current
|
|
contents or scan the filesystem. (Scanning is more precise.) */
|
|
}</programlisting>
|
|
Note that this behavior is intended to be used for informational
|
|
and debug purposes. It would be more appropriate to use programs
|
|
such as udev or HAL to initialize a device or start a user-mode
|
|
helper program, for instance.
|
|
</para>
|
|
</sect1>
|
|
|
|
<sect1 id="usbfs-bbbddd">
|
|
<title>/proc/bus/usb/BBB/DDD</title>
|
|
|
|
<para>Use these files in one of these basic ways:
|
|
</para>
|
|
|
|
<para><emphasis>They can be read,</emphasis>
|
|
producing first the device descriptor
|
|
(18 bytes) and then the descriptors for the current configuration.
|
|
See the USB 2.0 spec for details about those binary data formats.
|
|
You'll need to convert most multibyte values from little endian
|
|
format to your native host byte order, although a few of the
|
|
fields in the device descriptor (both of the BCD-encoded fields,
|
|
and the vendor and product IDs) will be byteswapped for you.
|
|
Note that configuration descriptors include descriptors for
|
|
interfaces, altsettings, endpoints, and maybe additional
|
|
class descriptors.
|
|
</para>
|
|
|
|
<para><emphasis>Perform USB operations</emphasis> using
|
|
<emphasis>ioctl()</emphasis> requests to make endpoint I/O
|
|
requests (synchronously or asynchronously) or manage
|
|
the device.
|
|
These requests need the CAP_SYS_RAWIO capability,
|
|
as well as filesystem access permissions.
|
|
Only one ioctl request can be made on one of these
|
|
device files at a time.
|
|
This means that if you are synchronously reading an endpoint
|
|
from one thread, you won't be able to write to a different
|
|
endpoint from another thread until the read completes.
|
|
This works for <emphasis>half duplex</emphasis> protocols,
|
|
but otherwise you'd use asynchronous i/o requests.
|
|
</para>
|
|
|
|
</sect1>
|
|
|
|
|
|
<sect1 id="usbfs-lifecycle">
|
|
<title>Life Cycle of User Mode Drivers</title>
|
|
|
|
<para>Such a driver first needs to find a device file
|
|
for a device it knows how to handle.
|
|
Maybe it was told about it because a
|
|
<filename>/sbin/hotplug</filename> event handling agent
|
|
chose that driver to handle the new device.
|
|
Or maybe it's an application that scans all the
|
|
/proc/bus/usb device files, and ignores most devices.
|
|
In either case, it should <function>read()</function> all
|
|
the descriptors from the device file,
|
|
and check them against what it knows how to handle.
|
|
It might just reject everything except a particular
|
|
vendor and product ID, or need a more complex policy.
|
|
</para>
|
|
|
|
<para>Never assume there will only be one such device
|
|
on the system at a time!
|
|
If your code can't handle more than one device at
|
|
a time, at least detect when there's more than one, and
|
|
have your users choose which device to use.
|
|
</para>
|
|
|
|
<para>Once your user mode driver knows what device to use,
|
|
it interacts with it in either of two styles.
|
|
The simple style is to make only control requests; some
|
|
devices don't need more complex interactions than those.
|
|
(An example might be software using vendor-specific control
|
|
requests for some initialization or configuration tasks,
|
|
with a kernel driver for the rest.)
|
|
</para>
|
|
|
|
<para>More likely, you need a more complex style driver:
|
|
one using non-control endpoints, reading or writing data
|
|
and claiming exclusive use of an interface.
|
|
<emphasis>Bulk</emphasis> transfers are easiest to use,
|
|
but only their sibling <emphasis>interrupt</emphasis> transfers
|
|
work with low speed devices.
|
|
Both interrupt and <emphasis>isochronous</emphasis> transfers
|
|
offer service guarantees because their bandwidth is reserved.
|
|
Such "periodic" transfers are awkward to use through usbfs,
|
|
unless you're using the asynchronous calls. However, interrupt
|
|
transfers can also be used in a synchronous "one shot" style.
|
|
</para>
|
|
|
|
<para>Your user-mode driver should never need to worry
|
|
about cleaning up request state when the device is
|
|
disconnected, although it should close its open file
|
|
descriptors as soon as it starts seeing the ENODEV
|
|
errors.
|
|
</para>
|
|
|
|
</sect1>
|
|
|
|
<sect1 id="usbfs-ioctl"><title>The ioctl() Requests</title>
|
|
|
|
<para>To use these ioctls, you need to include the following
|
|
headers in your userspace program:
|
|
<programlisting>#include <linux/usb.h>
|
|
#include <linux/usbdevice_fs.h>
|
|
#include <asm/byteorder.h></programlisting>
|
|
The standard USB device model requests, from "Chapter 9" of
|
|
the USB 2.0 specification, are automatically included from
|
|
the <filename><linux/usb/ch9.h></filename> header.
|
|
</para>
|
|
|
|
<para>Unless noted otherwise, the ioctl requests
|
|
described here will
|
|
update the modification time on the usbfs file to which
|
|
they are applied (unless they fail).
|
|
A return of zero indicates success; otherwise, a
|
|
standard USB error code is returned. (These are
|
|
documented in
|
|
<filename>Documentation/usb/error-codes.txt</filename>
|
|
in your kernel sources.)
|
|
</para>
|
|
|
|
<para>Each of these files multiplexes access to several
|
|
I/O streams, one per endpoint.
|
|
Each device has one control endpoint (endpoint zero)
|
|
which supports a limited RPC style RPC access.
|
|
Devices are configured
|
|
by hub_wq (in the kernel) setting a device-wide
|
|
<emphasis>configuration</emphasis> that affects things
|
|
like power consumption and basic functionality.
|
|
The endpoints are part of USB <emphasis>interfaces</emphasis>,
|
|
which may have <emphasis>altsettings</emphasis>
|
|
affecting things like which endpoints are available.
|
|
Many devices only have a single configuration and interface,
|
|
so drivers for them will ignore configurations and altsettings.
|
|
</para>
|
|
|
|
|
|
<sect2 id="usbfs-mgmt">
|
|
<title>Management/Status Requests</title>
|
|
|
|
<para>A number of usbfs requests don't deal very directly
|
|
with device I/O.
|
|
They mostly relate to device management and status.
|
|
These are all synchronous requests.
|
|
</para>
|
|
|
|
<variablelist>
|
|
|
|
<varlistentry><term>USBDEVFS_CLAIMINTERFACE</term>
|
|
<listitem><para>This is used to force usbfs to
|
|
claim a specific interface,
|
|
which has not previously been claimed by usbfs or any other
|
|
kernel driver.
|
|
The ioctl parameter is an integer holding the number of
|
|
the interface (bInterfaceNumber from descriptor).
|
|
</para><para>
|
|
Note that if your driver doesn't claim an interface
|
|
before trying to use one of its endpoints, and no
|
|
other driver has bound to it, then the interface is
|
|
automatically claimed by usbfs.
|
|
</para><para>
|
|
This claim will be released by a RELEASEINTERFACE ioctl,
|
|
or by closing the file descriptor.
|
|
File modification time is not updated by this request.
|
|
</para></listitem></varlistentry>
|
|
|
|
<varlistentry><term>USBDEVFS_CONNECTINFO</term>
|
|
<listitem><para>Says whether the device is lowspeed.
|
|
The ioctl parameter points to a structure like this:
|
|
<programlisting>struct usbdevfs_connectinfo {
|
|
unsigned int devnum;
|
|
unsigned char slow;
|
|
}; </programlisting>
|
|
File modification time is not updated by this request.
|
|
</para><para>
|
|
<emphasis>You can't tell whether a "not slow"
|
|
device is connected at high speed (480 MBit/sec)
|
|
or just full speed (12 MBit/sec).</emphasis>
|
|
You should know the devnum value already,
|
|
it's the DDD value of the device file name.
|
|
</para></listitem></varlistentry>
|
|
|
|
<varlistentry><term>USBDEVFS_GETDRIVER</term>
|
|
<listitem><para>Returns the name of the kernel driver
|
|
bound to a given interface (a string). Parameter
|
|
is a pointer to this structure, which is modified:
|
|
<programlisting>struct usbdevfs_getdriver {
|
|
unsigned int interface;
|
|
char driver[USBDEVFS_MAXDRIVERNAME + 1];
|
|
};</programlisting>
|
|
File modification time is not updated by this request.
|
|
</para></listitem></varlistentry>
|
|
|
|
<varlistentry><term>USBDEVFS_IOCTL</term>
|
|
<listitem><para>Passes a request from userspace through
|
|
to a kernel driver that has an ioctl entry in the
|
|
<emphasis>struct usb_driver</emphasis> it registered.
|
|
<programlisting>struct usbdevfs_ioctl {
|
|
int ifno;
|
|
int ioctl_code;
|
|
void *data;
|
|
};
|
|
|
|
/* user mode call looks like this.
|
|
* 'request' becomes the driver->ioctl() 'code' parameter.
|
|
* the size of 'param' is encoded in 'request', and that data
|
|
* is copied to or from the driver->ioctl() 'buf' parameter.
|
|
*/
|
|
static int
|
|
usbdev_ioctl (int fd, int ifno, unsigned request, void *param)
|
|
{
|
|
struct usbdevfs_ioctl wrapper;
|
|
|
|
wrapper.ifno = ifno;
|
|
wrapper.ioctl_code = request;
|
|
wrapper.data = param;
|
|
|
|
return ioctl (fd, USBDEVFS_IOCTL, &wrapper);
|
|
} </programlisting>
|
|
File modification time is not updated by this request.
|
|
</para><para>
|
|
This request lets kernel drivers talk to user mode code
|
|
through filesystem operations even when they don't create
|
|
a character or block special device.
|
|
It's also been used to do things like ask devices what
|
|
device special file should be used.
|
|
Two pre-defined ioctls are used
|
|
to disconnect and reconnect kernel drivers, so
|
|
that user mode code can completely manage binding
|
|
and configuration of devices.
|
|
</para></listitem></varlistentry>
|
|
|
|
<varlistentry><term>USBDEVFS_RELEASEINTERFACE</term>
|
|
<listitem><para>This is used to release the claim usbfs
|
|
made on interface, either implicitly or because of a
|
|
USBDEVFS_CLAIMINTERFACE call, before the file
|
|
descriptor is closed.
|
|
The ioctl parameter is an integer holding the number of
|
|
the interface (bInterfaceNumber from descriptor);
|
|
File modification time is not updated by this request.
|
|
</para><warning><para>
|
|
<emphasis>No security check is made to ensure
|
|
that the task which made the claim is the one
|
|
which is releasing it.
|
|
This means that user mode driver may interfere
|
|
other ones. </emphasis>
|
|
</para></warning></listitem></varlistentry>
|
|
|
|
<varlistentry><term>USBDEVFS_RESETEP</term>
|
|
<listitem><para>Resets the data toggle value for an endpoint
|
|
(bulk or interrupt) to DATA0.
|
|
The ioctl parameter is an integer endpoint number
|
|
(1 to 15, as identified in the endpoint descriptor),
|
|
with USB_DIR_IN added if the device's endpoint sends
|
|
data to the host.
|
|
</para><warning><para>
|
|
<emphasis>Avoid using this request.
|
|
It should probably be removed.</emphasis>
|
|
Using it typically means the device and driver will lose
|
|
toggle synchronization. If you really lost synchronization,
|
|
you likely need to completely handshake with the device,
|
|
using a request like CLEAR_HALT
|
|
or SET_INTERFACE.
|
|
</para></warning></listitem></varlistentry>
|
|
|
|
<varlistentry><term>USBDEVFS_DROP_PRIVILEGES</term>
|
|
<listitem><para>This is used to relinquish the ability
|
|
to do certain operations which are considered to be
|
|
privileged on a usbfs file descriptor.
|
|
This includes claiming arbitrary interfaces, resetting
|
|
a device on which there are currently claimed interfaces
|
|
from other users, and issuing USBDEVFS_IOCTL calls.
|
|
The ioctl parameter is a 32 bit mask of interfaces
|
|
the user is allowed to claim on this file descriptor.
|
|
You may issue this ioctl more than one time to narrow
|
|
said mask.
|
|
</para></listitem></varlistentry>
|
|
</variablelist>
|
|
|
|
</sect2>
|
|
|
|
<sect2 id="usbfs-sync">
|
|
<title>Synchronous I/O Support</title>
|
|
|
|
<para>Synchronous requests involve the kernel blocking
|
|
until the user mode request completes, either by
|
|
finishing successfully or by reporting an error.
|
|
In most cases this is the simplest way to use usbfs,
|
|
although as noted above it does prevent performing I/O
|
|
to more than one endpoint at a time.
|
|
</para>
|
|
|
|
<variablelist>
|
|
|
|
<varlistentry><term>USBDEVFS_BULK</term>
|
|
<listitem><para>Issues a bulk read or write request to the
|
|
device.
|
|
The ioctl parameter is a pointer to this structure:
|
|
<programlisting>struct usbdevfs_bulktransfer {
|
|
unsigned int ep;
|
|
unsigned int len;
|
|
unsigned int timeout; /* in milliseconds */
|
|
void *data;
|
|
};</programlisting>
|
|
</para><para>The "ep" value identifies a
|
|
bulk endpoint number (1 to 15, as identified in an endpoint
|
|
descriptor),
|
|
masked with USB_DIR_IN when referring to an endpoint which
|
|
sends data to the host from the device.
|
|
The length of the data buffer is identified by "len";
|
|
Recent kernels support requests up to about 128KBytes.
|
|
<emphasis>FIXME say how read length is returned,
|
|
and how short reads are handled.</emphasis>.
|
|
</para></listitem></varlistentry>
|
|
|
|
<varlistentry><term>USBDEVFS_CLEAR_HALT</term>
|
|
<listitem><para>Clears endpoint halt (stall) and
|
|
resets the endpoint toggle. This is only
|
|
meaningful for bulk or interrupt endpoints.
|
|
The ioctl parameter is an integer endpoint number
|
|
(1 to 15, as identified in an endpoint descriptor),
|
|
masked with USB_DIR_IN when referring to an endpoint which
|
|
sends data to the host from the device.
|
|
</para><para>
|
|
Use this on bulk or interrupt endpoints which have
|
|
stalled, returning <emphasis>-EPIPE</emphasis> status
|
|
to a data transfer request.
|
|
Do not issue the control request directly, since
|
|
that could invalidate the host's record of the
|
|
data toggle.
|
|
</para></listitem></varlistentry>
|
|
|
|
<varlistentry><term>USBDEVFS_CONTROL</term>
|
|
<listitem><para>Issues a control request to the device.
|
|
The ioctl parameter points to a structure like this:
|
|
<programlisting>struct usbdevfs_ctrltransfer {
|
|
__u8 bRequestType;
|
|
__u8 bRequest;
|
|
__u16 wValue;
|
|
__u16 wIndex;
|
|
__u16 wLength;
|
|
__u32 timeout; /* in milliseconds */
|
|
void *data;
|
|
};</programlisting>
|
|
</para><para>
|
|
The first eight bytes of this structure are the contents
|
|
of the SETUP packet to be sent to the device; see the
|
|
USB 2.0 specification for details.
|
|
The bRequestType value is composed by combining a
|
|
USB_TYPE_* value, a USB_DIR_* value, and a
|
|
USB_RECIP_* value (from
|
|
<emphasis><linux/usb.h></emphasis>).
|
|
If wLength is nonzero, it describes the length of the data
|
|
buffer, which is either written to the device
|
|
(USB_DIR_OUT) or read from the device (USB_DIR_IN).
|
|
</para><para>
|
|
At this writing, you can't transfer more than 4 KBytes
|
|
of data to or from a device; usbfs has a limit, and
|
|
some host controller drivers have a limit.
|
|
(That's not usually a problem.)
|
|
<emphasis>Also</emphasis> there's no way to say it's
|
|
not OK to get a short read back from the device.
|
|
</para></listitem></varlistentry>
|
|
|
|
<varlistentry><term>USBDEVFS_RESET</term>
|
|
<listitem><para>Does a USB level device reset.
|
|
The ioctl parameter is ignored.
|
|
After the reset, this rebinds all device interfaces.
|
|
File modification time is not updated by this request.
|
|
</para><warning><para>
|
|
<emphasis>Avoid using this call</emphasis>
|
|
until some usbcore bugs get fixed,
|
|
since it does not fully synchronize device, interface,
|
|
and driver (not just usbfs) state.
|
|
</para></warning></listitem></varlistentry>
|
|
|
|
<varlistentry><term>USBDEVFS_SETINTERFACE</term>
|
|
<listitem><para>Sets the alternate setting for an
|
|
interface. The ioctl parameter is a pointer to a
|
|
structure like this:
|
|
<programlisting>struct usbdevfs_setinterface {
|
|
unsigned int interface;
|
|
unsigned int altsetting;
|
|
}; </programlisting>
|
|
File modification time is not updated by this request.
|
|
</para><para>
|
|
Those struct members are from some interface descriptor
|
|
applying to the current configuration.
|
|
The interface number is the bInterfaceNumber value, and
|
|
the altsetting number is the bAlternateSetting value.
|
|
(This resets each endpoint in the interface.)
|
|
</para></listitem></varlistentry>
|
|
|
|
<varlistentry><term>USBDEVFS_SETCONFIGURATION</term>
|
|
<listitem><para>Issues the
|
|
<function>usb_set_configuration</function> call
|
|
for the device.
|
|
The parameter is an integer holding the number of
|
|
a configuration (bConfigurationValue from descriptor).
|
|
File modification time is not updated by this request.
|
|
</para><warning><para>
|
|
<emphasis>Avoid using this call</emphasis>
|
|
until some usbcore bugs get fixed,
|
|
since it does not fully synchronize device, interface,
|
|
and driver (not just usbfs) state.
|
|
</para></warning></listitem></varlistentry>
|
|
|
|
</variablelist>
|
|
</sect2>
|
|
|
|
<sect2 id="usbfs-async">
|
|
<title>Asynchronous I/O Support</title>
|
|
|
|
<para>As mentioned above, there are situations where it may be
|
|
important to initiate concurrent operations from user mode code.
|
|
This is particularly important for periodic transfers
|
|
(interrupt and isochronous), but it can be used for other
|
|
kinds of USB requests too.
|
|
In such cases, the asynchronous requests described here
|
|
are essential. Rather than submitting one request and having
|
|
the kernel block until it completes, the blocking is separate.
|
|
</para>
|
|
|
|
<para>These requests are packaged into a structure that
|
|
resembles the URB used by kernel device drivers.
|
|
(No POSIX Async I/O support here, sorry.)
|
|
It identifies the endpoint type (USBDEVFS_URB_TYPE_*),
|
|
endpoint (number, masked with USB_DIR_IN as appropriate),
|
|
buffer and length, and a user "context" value serving to
|
|
uniquely identify each request.
|
|
(It's usually a pointer to per-request data.)
|
|
Flags can modify requests (not as many as supported for
|
|
kernel drivers).
|
|
</para>
|
|
|
|
<para>Each request can specify a realtime signal number
|
|
(between SIGRTMIN and SIGRTMAX, inclusive) to request a
|
|
signal be sent when the request completes.
|
|
</para>
|
|
|
|
<para>When usbfs returns these urbs, the status value
|
|
is updated, and the buffer may have been modified.
|
|
Except for isochronous transfers, the actual_length is
|
|
updated to say how many bytes were transferred; if the
|
|
USBDEVFS_URB_DISABLE_SPD flag is set
|
|
("short packets are not OK"), if fewer bytes were read
|
|
than were requested then you get an error report.
|
|
</para>
|
|
|
|
<programlisting>struct usbdevfs_iso_packet_desc {
|
|
unsigned int length;
|
|
unsigned int actual_length;
|
|
unsigned int status;
|
|
};
|
|
|
|
struct usbdevfs_urb {
|
|
unsigned char type;
|
|
unsigned char endpoint;
|
|
int status;
|
|
unsigned int flags;
|
|
void *buffer;
|
|
int buffer_length;
|
|
int actual_length;
|
|
int start_frame;
|
|
int number_of_packets;
|
|
int error_count;
|
|
unsigned int signr;
|
|
void *usercontext;
|
|
struct usbdevfs_iso_packet_desc iso_frame_desc[];
|
|
};</programlisting>
|
|
|
|
<para> For these asynchronous requests, the file modification
|
|
time reflects when the request was initiated.
|
|
This contrasts with their use with the synchronous requests,
|
|
where it reflects when requests complete.
|
|
</para>
|
|
|
|
<variablelist>
|
|
|
|
<varlistentry><term>USBDEVFS_DISCARDURB</term>
|
|
<listitem><para>
|
|
<emphasis>TBS</emphasis>
|
|
File modification time is not updated by this request.
|
|
</para><para>
|
|
</para></listitem></varlistentry>
|
|
|
|
<varlistentry><term>USBDEVFS_DISCSIGNAL</term>
|
|
<listitem><para>
|
|
<emphasis>TBS</emphasis>
|
|
File modification time is not updated by this request.
|
|
</para><para>
|
|
</para></listitem></varlistentry>
|
|
|
|
<varlistentry><term>USBDEVFS_REAPURB</term>
|
|
<listitem><para>
|
|
<emphasis>TBS</emphasis>
|
|
File modification time is not updated by this request.
|
|
</para><para>
|
|
</para></listitem></varlistentry>
|
|
|
|
<varlistentry><term>USBDEVFS_REAPURBNDELAY</term>
|
|
<listitem><para>
|
|
<emphasis>TBS</emphasis>
|
|
File modification time is not updated by this request.
|
|
</para><para>
|
|
</para></listitem></varlistentry>
|
|
|
|
<varlistentry><term>USBDEVFS_SUBMITURB</term>
|
|
<listitem><para>
|
|
<emphasis>TBS</emphasis>
|
|
</para><para>
|
|
</para></listitem></varlistentry>
|
|
|
|
</variablelist>
|
|
</sect2>
|
|
|
|
</sect1>
|
|
|
|
</chapter>
|
|
|
|
</book>
|
|
<!-- vim:syntax=sgml:sw=4
|
|
-->
|