mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-23 04:34:11 +08:00
be2019816e
Add support for the Motorola/Emerson MVME5100 Single Board Computer. The MVME5100 is a 6U form factor VME64 computer with: - A single MPC7410 or MPC750 CPU - A HAWK Processor Host Bridge (CPU to PCI) and MultiProcessor Interrupt Controller (MPIC) - Up to 500Mb of onboard memory - A M48T37 Real Time Clock (RTC) and Non-Volatile Memory chip - Two 16550 compatible UARTS - Two Intel E100 Fast Ethernets - Two PCI Mezzanine Card (PMC) Slots - PPCBug Firmware The HAWK PHB/MPIC is compatible with the MPC10x devices. There is no onboard disk support. This is usually provided by installing a PMC in first PMC slot. This patch revives the board support, it was present in early 2.6 series kernels. The board support in those days was by Matt Porter of MontaVista Software. CSC Australia has around 31 of these boards in service. The kernel in use for the boards is based on 2.6.31. The boards are operated without disks from a file server. This patch is based on linux-3.13-rc2 and has been boot tested. Only boards with 512 Mb of memory are known to work. Signed-off-by: Stephen Chivers <schivers@csc.com> Tested-by: Alessio Igor Bogani <alessio.bogani@elettra.eu> Signed-off-by: Scott Wood <scottwood@freescale.com>
145 lines
3.4 KiB
Plaintext
145 lines
3.4 KiB
Plaintext
CONFIG_SYSVIPC=y
|
|
CONFIG_POSIX_MQUEUE=y
|
|
CONFIG_NO_HZ=y
|
|
CONFIG_HIGH_RES_TIMERS=y
|
|
CONFIG_IKCONFIG=y
|
|
CONFIG_IKCONFIG_PROC=y
|
|
CONFIG_LOG_BUF_SHIFT=14
|
|
# CONFIG_UTS_NS is not set
|
|
# CONFIG_IPC_NS is not set
|
|
# CONFIG_PID_NS is not set
|
|
# CONFIG_NET_NS is not set
|
|
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
|
|
# CONFIG_COMPAT_BRK is not set
|
|
CONFIG_MODULES=y
|
|
CONFIG_MODULE_UNLOAD=y
|
|
# CONFIG_BLK_DEV_BSG is not set
|
|
# CONFIG_PPC_CHRP is not set
|
|
# CONFIG_PPC_PMAC is not set
|
|
CONFIG_EMBEDDED6xx=y
|
|
CONFIG_MVME5100=y
|
|
CONFIG_KVM_GUEST=y
|
|
CONFIG_HZ_100=y
|
|
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
|
|
# CONFIG_COMPACTION is not set
|
|
CONFIG_CMDLINE_BOOL=y
|
|
CONFIG_CMDLINE="console=ttyS0,9600 ip=dhcp root=/dev/nfs"
|
|
CONFIG_NET=y
|
|
CONFIG_PACKET=y
|
|
CONFIG_UNIX=y
|
|
CONFIG_INET=y
|
|
CONFIG_IP_MULTICAST=y
|
|
CONFIG_IP_PNP=y
|
|
CONFIG_IP_PNP_DHCP=y
|
|
CONFIG_IP_PNP_BOOTP=y
|
|
# CONFIG_INET_LRO is not set
|
|
# CONFIG_IPV6 is not set
|
|
CONFIG_NETFILTER=y
|
|
CONFIG_NF_CONNTRACK=m
|
|
CONFIG_NF_CT_PROTO_SCTP=m
|
|
CONFIG_NF_CONNTRACK_AMANDA=m
|
|
CONFIG_NF_CONNTRACK_FTP=m
|
|
CONFIG_NF_CONNTRACK_H323=m
|
|
CONFIG_NF_CONNTRACK_IRC=m
|
|
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
|
|
CONFIG_NF_CONNTRACK_PPTP=m
|
|
CONFIG_NF_CONNTRACK_SIP=m
|
|
CONFIG_NF_CONNTRACK_TFTP=m
|
|
CONFIG_NETFILTER_XT_MATCH_MAC=m
|
|
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
|
|
CONFIG_NETFILTER_XT_MATCH_STATE=m
|
|
CONFIG_NF_CONNTRACK_IPV4=m
|
|
CONFIG_IP_NF_IPTABLES=m
|
|
CONFIG_IP_NF_FILTER=m
|
|
CONFIG_IP_NF_TARGET_REJECT=m
|
|
CONFIG_IP_NF_MANGLE=m
|
|
CONFIG_IP_NF_TARGET_ECN=m
|
|
CONFIG_IP_NF_TARGET_TTL=m
|
|
CONFIG_IP_NF_RAW=m
|
|
CONFIG_IP_NF_ARPTABLES=m
|
|
CONFIG_IP_NF_ARPFILTER=m
|
|
CONFIG_IP_NF_ARP_MANGLE=m
|
|
CONFIG_LAPB=m
|
|
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
|
|
CONFIG_PROC_DEVICETREE=y
|
|
CONFIG_BLK_DEV_LOOP=y
|
|
CONFIG_BLK_DEV_RAM=y
|
|
CONFIG_BLK_DEV_RAM_COUNT=2
|
|
CONFIG_BLK_DEV_RAM_SIZE=8192
|
|
CONFIG_EEPROM_LEGACY=m
|
|
CONFIG_NETDEVICES=y
|
|
CONFIG_TUN=m
|
|
# CONFIG_NET_VENDOR_3COM is not set
|
|
CONFIG_E100=y
|
|
# CONFIG_WLAN is not set
|
|
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
|
|
# CONFIG_INPUT_KEYBOARD is not set
|
|
# CONFIG_INPUT_MOUSE is not set
|
|
# CONFIG_SERIO is not set
|
|
CONFIG_SERIAL_8250=y
|
|
CONFIG_SERIAL_8250_CONSOLE=y
|
|
CONFIG_SERIAL_8250_NR_UARTS=10
|
|
CONFIG_SERIAL_8250_EXTENDED=y
|
|
CONFIG_SERIAL_8250_MANY_PORTS=y
|
|
CONFIG_SERIAL_8250_SHARE_IRQ=y
|
|
CONFIG_SERIAL_OF_PLATFORM=y
|
|
CONFIG_HW_RANDOM=y
|
|
CONFIG_I2C=y
|
|
CONFIG_I2C_CHARDEV=y
|
|
CONFIG_I2C_MPC=y
|
|
# CONFIG_HWMON is not set
|
|
CONFIG_VIDEO_OUTPUT_CONTROL=m
|
|
# CONFIG_VGA_CONSOLE is not set
|
|
# CONFIG_HID is not set
|
|
# CONFIG_USB_SUPPORT is not set
|
|
# CONFIG_IOMMU_SUPPORT is not set
|
|
CONFIG_VME_BUS=m
|
|
CONFIG_VME_CA91CX42=m
|
|
CONFIG_EXT2_FS=m
|
|
CONFIG_EXT3_FS=m
|
|
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
|
|
CONFIG_XFS_FS=m
|
|
CONFIG_ISO9660_FS=m
|
|
CONFIG_JOLIET=y
|
|
CONFIG_ZISOFS=y
|
|
CONFIG_UDF_FS=m
|
|
CONFIG_MSDOS_FS=m
|
|
CONFIG_VFAT_FS=m
|
|
CONFIG_PROC_KCORE=y
|
|
CONFIG_TMPFS=y
|
|
CONFIG_NFS_FS=y
|
|
CONFIG_NFS_V3_ACL=y
|
|
CONFIG_NFS_V4=y
|
|
CONFIG_ROOT_NFS=y
|
|
CONFIG_NFSD=m
|
|
CONFIG_NFSD_V3=y
|
|
CONFIG_CIFS=m
|
|
CONFIG_NLS=y
|
|
CONFIG_NLS_CODEPAGE_437=m
|
|
CONFIG_NLS_CODEPAGE_932=m
|
|
CONFIG_NLS_ISO8859_1=m
|
|
CONFIG_NLS_UTF8=m
|
|
CONFIG_CRC_CCITT=m
|
|
CONFIG_CRC_T10DIF=y
|
|
CONFIG_XZ_DEC=y
|
|
CONFIG_XZ_DEC_X86=y
|
|
CONFIG_XZ_DEC_IA64=y
|
|
CONFIG_XZ_DEC_ARM=y
|
|
CONFIG_XZ_DEC_ARMTHUMB=y
|
|
CONFIG_XZ_DEC_SPARC=y
|
|
CONFIG_MAGIC_SYSRQ=y
|
|
CONFIG_DEBUG_KERNEL=y
|
|
CONFIG_DETECT_HUNG_TASK=y
|
|
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=20
|
|
CONFIG_CRYPTO_CBC=y
|
|
CONFIG_CRYPTO_PCBC=m
|
|
CONFIG_CRYPTO_MD5=y
|
|
CONFIG_CRYPTO_MICHAEL_MIC=m
|
|
CONFIG_CRYPTO_SHA1=m
|
|
CONFIG_CRYPTO_BLOWFISH=m
|
|
CONFIG_CRYPTO_DES=y
|
|
CONFIG_CRYPTO_SERPENT=m
|
|
CONFIG_CRYPTO_TWOFISH=m
|
|
CONFIG_CRYPTO_DEFLATE=m
|
|
# CONFIG_CRYPTO_ANSI_CPRNG is not set
|