mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-16 01:04:08 +08:00
7c2553f0db
i.MX7ULP's ARM core clock design is totally different compared with i.MX7D/8M SoCs which supported by imx-cpufreq-dt. It needs get_intermediate and target_intermedate to configure clk MUX ready, before let OPP configure ARM core clk. |---FIRC |------RUN---...---SCS(MUX2) --------| ARM --(MUX1) |---SPLL_PFD0(CLK_SET_RATE_GATE) |------HSRUN--...--HSRUN_SCS(MUX3)---| |---SRIC FIRC is step clk, SPLL_PFD0 is the normal clk driving ARM core. MUX2 and MUX3 share same inputs. So if MUX2/MUX3 both sources from SPLL_PFD0, both MUXes will lose input when configure SPLL_PFD0. So the target_intermediate will configure MUX2/MUX3 to FIRC, to avoid ARM core lose clk when configure SPLL_PFD0. Signed-off-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
198 lines
5.3 KiB
C
198 lines
5.3 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright 2019 NXP
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/cpu.h>
|
|
#include <linux/cpufreq.h>
|
|
#include <linux/err.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/nvmem-consumer.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_opp.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include "cpufreq-dt.h"
|
|
|
|
#define OCOTP_CFG3_SPEED_GRADE_SHIFT 8
|
|
#define OCOTP_CFG3_SPEED_GRADE_MASK (0x3 << 8)
|
|
#define IMX8MN_OCOTP_CFG3_SPEED_GRADE_MASK (0xf << 8)
|
|
#define OCOTP_CFG3_MKT_SEGMENT_SHIFT 6
|
|
#define OCOTP_CFG3_MKT_SEGMENT_MASK (0x3 << 6)
|
|
#define IMX8MP_OCOTP_CFG3_MKT_SEGMENT_SHIFT 5
|
|
#define IMX8MP_OCOTP_CFG3_MKT_SEGMENT_MASK (0x3 << 5)
|
|
|
|
#define IMX7ULP_MAX_RUN_FREQ 528000
|
|
|
|
/* cpufreq-dt device registered by imx-cpufreq-dt */
|
|
static struct platform_device *cpufreq_dt_pdev;
|
|
static struct opp_table *cpufreq_opp_table;
|
|
static struct device *cpu_dev;
|
|
|
|
enum IMX7ULP_CPUFREQ_CLKS {
|
|
ARM,
|
|
CORE,
|
|
SCS_SEL,
|
|
HSRUN_CORE,
|
|
HSRUN_SCS_SEL,
|
|
FIRC,
|
|
};
|
|
|
|
static struct clk_bulk_data imx7ulp_clks[] = {
|
|
{ .id = "arm" },
|
|
{ .id = "core" },
|
|
{ .id = "scs_sel" },
|
|
{ .id = "hsrun_core" },
|
|
{ .id = "hsrun_scs_sel" },
|
|
{ .id = "firc" },
|
|
};
|
|
|
|
static unsigned int imx7ulp_get_intermediate(struct cpufreq_policy *policy,
|
|
unsigned int index)
|
|
{
|
|
return clk_get_rate(imx7ulp_clks[FIRC].clk);
|
|
}
|
|
|
|
static int imx7ulp_target_intermediate(struct cpufreq_policy *policy,
|
|
unsigned int index)
|
|
{
|
|
unsigned int newfreq = policy->freq_table[index].frequency;
|
|
|
|
clk_set_parent(imx7ulp_clks[SCS_SEL].clk, imx7ulp_clks[FIRC].clk);
|
|
clk_set_parent(imx7ulp_clks[HSRUN_SCS_SEL].clk, imx7ulp_clks[FIRC].clk);
|
|
|
|
if (newfreq > IMX7ULP_MAX_RUN_FREQ)
|
|
clk_set_parent(imx7ulp_clks[ARM].clk,
|
|
imx7ulp_clks[HSRUN_CORE].clk);
|
|
else
|
|
clk_set_parent(imx7ulp_clks[ARM].clk, imx7ulp_clks[CORE].clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct cpufreq_dt_platform_data imx7ulp_data = {
|
|
.target_intermediate = imx7ulp_target_intermediate,
|
|
.get_intermediate = imx7ulp_get_intermediate,
|
|
};
|
|
|
|
static int imx_cpufreq_dt_probe(struct platform_device *pdev)
|
|
{
|
|
struct platform_device *dt_pdev;
|
|
u32 cell_value, supported_hw[2];
|
|
int speed_grade, mkt_segment;
|
|
int ret;
|
|
|
|
cpu_dev = get_cpu_device(0);
|
|
|
|
if (!of_find_property(cpu_dev->of_node, "cpu-supply", NULL))
|
|
return -ENODEV;
|
|
|
|
if (of_machine_is_compatible("fsl,imx7ulp")) {
|
|
ret = clk_bulk_get(cpu_dev, ARRAY_SIZE(imx7ulp_clks),
|
|
imx7ulp_clks);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dt_pdev = platform_device_register_data(NULL, "cpufreq-dt",
|
|
-1, &imx7ulp_data,
|
|
sizeof(imx7ulp_data));
|
|
if (IS_ERR(dt_pdev)) {
|
|
clk_bulk_put(ARRAY_SIZE(imx7ulp_clks), imx7ulp_clks);
|
|
ret = PTR_ERR(dt_pdev);
|
|
dev_err(&pdev->dev, "Failed to register cpufreq-dt: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
cpufreq_dt_pdev = dt_pdev;
|
|
|
|
return 0;
|
|
}
|
|
|
|
ret = nvmem_cell_read_u32(cpu_dev, "speed_grade", &cell_value);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (of_machine_is_compatible("fsl,imx8mn") ||
|
|
of_machine_is_compatible("fsl,imx8mp"))
|
|
speed_grade = (cell_value & IMX8MN_OCOTP_CFG3_SPEED_GRADE_MASK)
|
|
>> OCOTP_CFG3_SPEED_GRADE_SHIFT;
|
|
else
|
|
speed_grade = (cell_value & OCOTP_CFG3_SPEED_GRADE_MASK)
|
|
>> OCOTP_CFG3_SPEED_GRADE_SHIFT;
|
|
|
|
if (of_machine_is_compatible("fsl,imx8mp"))
|
|
mkt_segment = (cell_value & IMX8MP_OCOTP_CFG3_MKT_SEGMENT_MASK)
|
|
>> IMX8MP_OCOTP_CFG3_MKT_SEGMENT_SHIFT;
|
|
else
|
|
mkt_segment = (cell_value & OCOTP_CFG3_MKT_SEGMENT_MASK)
|
|
>> OCOTP_CFG3_MKT_SEGMENT_SHIFT;
|
|
|
|
/*
|
|
* Early samples without fuses written report "0 0" which may NOT
|
|
* match any OPP defined in DT. So clamp to minimum OPP defined in
|
|
* DT to avoid warning for "no OPPs".
|
|
*
|
|
* Applies to i.MX8M series SoCs.
|
|
*/
|
|
if (mkt_segment == 0 && speed_grade == 0) {
|
|
if (of_machine_is_compatible("fsl,imx8mm") ||
|
|
of_machine_is_compatible("fsl,imx8mq"))
|
|
speed_grade = 1;
|
|
if (of_machine_is_compatible("fsl,imx8mn") ||
|
|
of_machine_is_compatible("fsl,imx8mp"))
|
|
speed_grade = 0xb;
|
|
}
|
|
|
|
supported_hw[0] = BIT(speed_grade);
|
|
supported_hw[1] = BIT(mkt_segment);
|
|
dev_info(&pdev->dev, "cpu speed grade %d mkt segment %d supported-hw %#x %#x\n",
|
|
speed_grade, mkt_segment, supported_hw[0], supported_hw[1]);
|
|
|
|
cpufreq_opp_table = dev_pm_opp_set_supported_hw(cpu_dev, supported_hw, 2);
|
|
if (IS_ERR(cpufreq_opp_table)) {
|
|
ret = PTR_ERR(cpufreq_opp_table);
|
|
dev_err(&pdev->dev, "Failed to set supported opp: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
cpufreq_dt_pdev = platform_device_register_data(
|
|
&pdev->dev, "cpufreq-dt", -1, NULL, 0);
|
|
if (IS_ERR(cpufreq_dt_pdev)) {
|
|
dev_pm_opp_put_supported_hw(cpufreq_opp_table);
|
|
ret = PTR_ERR(cpufreq_dt_pdev);
|
|
dev_err(&pdev->dev, "Failed to register cpufreq-dt: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx_cpufreq_dt_remove(struct platform_device *pdev)
|
|
{
|
|
platform_device_unregister(cpufreq_dt_pdev);
|
|
if (!of_machine_is_compatible("fsl,imx7ulp"))
|
|
dev_pm_opp_put_supported_hw(cpufreq_opp_table);
|
|
else
|
|
clk_bulk_put(ARRAY_SIZE(imx7ulp_clks), imx7ulp_clks);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver imx_cpufreq_dt_driver = {
|
|
.probe = imx_cpufreq_dt_probe,
|
|
.remove = imx_cpufreq_dt_remove,
|
|
.driver = {
|
|
.name = "imx-cpufreq-dt",
|
|
},
|
|
};
|
|
module_platform_driver(imx_cpufreq_dt_driver);
|
|
|
|
MODULE_ALIAS("platform:imx-cpufreq-dt");
|
|
MODULE_DESCRIPTION("Freescale i.MX cpufreq speed grading driver");
|
|
MODULE_LICENSE("GPL v2");
|