mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-27 06:34:11 +08:00
1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
176 lines
5.3 KiB
C
176 lines
5.3 KiB
C
/*
|
|
* PLX 9060 PCI Interface chip
|
|
*/
|
|
|
|
/*
|
|
* PCI configuration registers, same offset on local and PCI sides,
|
|
* but on PCI side, must use PCI BIOS calls to read/write.
|
|
*/
|
|
#define PCI_PLXREGS_BASE_ADDR 0x10
|
|
|
|
#define PCI_PLXREGS_IO_ADDR 0x14
|
|
|
|
#define PCI_SPACE0_BASE_ADDR 0x18
|
|
|
|
#define PCI_ROM_BASE_ADDR 0x30
|
|
# define PCI_ROM_ENABLED 0x00000001
|
|
|
|
#define PCI_INT_LINE 0x3C
|
|
|
|
/*
|
|
* Registers accessible directly from PCI and local side.
|
|
* Offset is from PCI side. Add PLX_LCL_OFFSET for local address.
|
|
*/
|
|
#define PLX_LCL_OFFSET 0x80 /* Offset of regs from local side */
|
|
|
|
/*
|
|
* Local Configuration Registers
|
|
*/
|
|
#define PLX_SPACE0_RANGE 0x00 /* Range for PCI to Lcl Addr Space 0 */
|
|
#define PLX_SPACE0_BASE_ADDR 0x04 /* Lcl Base address remap */
|
|
|
|
#define PLX_ROM_RANGE 0x10 /* Range for expansion ROM (DMA) */
|
|
#define PLX_ROM_BASE_ADDR 0x14 /* Lcl base address remap for ROM */
|
|
|
|
#define PLX_BUS_REGION 0x18 /* Bus Region Descriptors */
|
|
|
|
/*
|
|
* Shared Run Time Registers
|
|
*/
|
|
#define PLX_MBOX0 0x40
|
|
#define PLX_MBOX1 0x44
|
|
#define PLX_MBOX2 0x48
|
|
#define PLX_MBOX3 0x4C
|
|
#define PLX_MBOX4 0x50
|
|
#define PLX_MBOX5 0x54
|
|
#define PLX_MBOX6 0x58
|
|
#define PLX_MBOX7 0x5C
|
|
|
|
#define PLX_PCI2LCL_DOORBELL 0x60
|
|
|
|
#define PLX_LCL2PCI_DOORBELL 0x64
|
|
|
|
#define PLX_INT_CSR 0x68 /* Interrupt Control/Status */
|
|
# define PLX_LSERR_ENABLE 0x00000001
|
|
# define PLX_LSERR_PE 0x00000002
|
|
# define PLX_SERR 0x00000004
|
|
# undef PLX_UNUSED /* 0x00000008 */
|
|
# undef PLX_UNUSED /* 0x00000010 */
|
|
# undef PLX_UNUSED /* 0x00000020 */
|
|
# undef PLX_UNUSED /* 0x00000040 */
|
|
# undef PLX_UNUSED /* 0x00000080 */
|
|
# define PLX_PCI_IE 0x00000100
|
|
# define PLX_PCI_DOORBELL_IE 0x00000200
|
|
# define PLX_PCI_ABORT_IE 0x00000400
|
|
# define PLX_PCI_LOCAL_IE 0x00000800
|
|
# define PLX_RETRY_ABORT_ENABLE 0x00001000
|
|
# define PLX_PCI_DOORBELL_INT 0x00002000
|
|
# define PLX_PCI_ABORT_INT 0x00004000
|
|
# define PLX_PCI_LOCAL_INT 0x00008000
|
|
# define PLX_LCL_IE 0x00010000
|
|
# define PLX_LCL_DOORBELL_IE 0x00020000
|
|
# define PLX_LCL_DMA0_IE 0x00040000
|
|
# define PLX_LCL_DMA1_IE 0x00080000
|
|
# define PLX_LCL_DOORBELL_INT 0x00100000
|
|
# define PLX_LCL_DMA0_INT 0x00200000
|
|
# define PLX_LCL_DMA1_INT 0x00400000
|
|
# define PLX_LCL_BIST_INT 0x00800000
|
|
# define PLX_BM_DIRECT_ 0x01000000
|
|
# define PLX_BM_DMA0_ 0x02000000
|
|
# define PLX_BM_DMA1_ 0x04000000
|
|
# define PLX_BM_ABORT_ 0x08000000
|
|
# undef PLX_UNUSED /* 0x10000000 */
|
|
# undef PLX_UNUSED /* 0x20000000 */
|
|
# undef PLX_UNUSED /* 0x40000000 */
|
|
# undef PLX_UNUSED /* 0x80000000 */
|
|
|
|
#define PLX_MISC_CSR 0x6c /* EEPROM,PCI,User,Init Control/Status*/
|
|
# define PLX_USEROUT 0x00010000
|
|
# define PLX_USERIN 0x00020000
|
|
# define PLX_EECK 0x01000000
|
|
# define PLX_EECS 0x02000000
|
|
# define PLX_EEWD 0x04000000
|
|
# define PLX_EERD 0x08000000
|
|
|
|
/*
|
|
* DMA registers. Offset is from local side
|
|
*/
|
|
#define PLX_DMA0_MODE 0x100
|
|
# define PLX_DMA_MODE_WIDTH32 0x00000003
|
|
# define PLX_DMA_MODE_WAITSTATES(X) ((X)<<2)
|
|
# define PLX_DMA_MODE_NOREADY 0x00000000
|
|
# define PLX_DMA_MODE_READY 0x00000040
|
|
# define PLX_DMA_MODE_NOBTERM 0x00000000
|
|
# define PLX_DMA_MODE_BTERM 0x00000080
|
|
# define PLX_DMA_MODE_NOBURST 0x00000000
|
|
# define PLX_DMA_MODE_BURST 0x00000100
|
|
# define PLX_DMA_MODE_NOCHAIN 0x00000000
|
|
# define PLX_DMA_MODE_CHAIN 0x00000200
|
|
# define PLX_DMA_MODE_DONE_IE 0x00000400
|
|
# define PLX_DMA_MODE_ADDR_HOLD 0x00000800
|
|
|
|
#define PLX_DMA0_PCI_ADDR 0x104
|
|
/* non-chaining mode PCI address */
|
|
|
|
#define PLX_DMA0_LCL_ADDR 0x108
|
|
/* non-chaining mode local address */
|
|
|
|
#define PLX_DMA0_SIZE 0x10C
|
|
/* non-chaining mode length */
|
|
|
|
#define PLX_DMA0_DESCRIPTOR 0x110
|
|
# define PLX_DMA_DESC_EOC 0x00000002
|
|
# define PLX_DMA_DESC_TC_IE 0x00000004
|
|
# define PLX_DMA_DESC_TO_HOST 0x00000008
|
|
# define PLX_DMA_DESC_TO_BOARD 0x00000000
|
|
# define PLX_DMA_DESC_NEXTADDR 0xFFFFfff0
|
|
|
|
#define PLX_DMA1_MODE 0x114
|
|
#define PLX_DMA1_PCI_ADDR 0x118
|
|
#define PLX_DMA1_LCL_ADDR 0x11C
|
|
#define PLX_DMA1_SIZE 0x110
|
|
#define PLX_DMA1_DESCRIPTOR 0x124
|
|
|
|
#define PLX_DMA_CSR 0x128
|
|
# define PLX_DMA_CSR_0_ENABLE 0x00000001
|
|
# define PLX_DMA_CSR_0_START 0x00000002
|
|
# define PLX_DMA_CSR_0_ABORT 0x00000004
|
|
# define PLX_DMA_CSR_0_CLR_INTR 0x00000008
|
|
# define PLX_DMA_CSR_0_DONE 0x00000010
|
|
# define PLX_DMA_CSR_1_ENABLE 0x00000100
|
|
# define PLX_DMA_CSR_1_START 0x00000200
|
|
# define PLX_DMA_CSR_1_ABORT 0x00000400
|
|
# define PLX_DMA_CSR_1_CLR_INTR 0x00000800
|
|
# define PLX_DMA_CSR_1_DONE 0x00001000
|
|
|
|
#define PLX_DMA_ARB0 0x12C
|
|
# define PLX_DMA_ARB0_LATENCY_T 0x000000FF
|
|
# define PLX_DMA_ARB0_PAUSE_T 0x0000FF00
|
|
# define PLX_DMA_ARB0_LATENCY_EN 0x00010000
|
|
# define PLX_DMA_ARB0_PAUSE_EN 0x00020000
|
|
# define PLX_DMA_ARB0_BREQ_EN 0x00040000
|
|
# define PLX_DMA_ARB0_PRI 0x00180000
|
|
# define PLX_DMA_ARB0_PRI_ROUND 0x00000000
|
|
# define PLX_DMA_ARB0_PRI_0 0x00080000
|
|
# define PLX_DMA_ARB0_PRI_1 0x00100000
|
|
|
|
#define PLX_DMA_ARB1 0x130
|
|
/* Chan 0: FIFO DEPTH=16 */
|
|
# define PLX_DMA_ARB1_0_P2L_LW_TRIG(X) ( ((X)&15) << 0 )
|
|
# define PLX_DMA_ARB1_0_L2P_LR_TRIG(X) ( ((X)&15) << 4 )
|
|
# define PLX_DMA_ARB1_0_L2P_PW_TRIG(X) ( ((X)&15) << 8 )
|
|
# define PLX_DMA_ARB1_0_P2L_PR_TRIG(X) ( ((X)&15) << 12 )
|
|
/* Chan 1: FIFO DEPTH=8 */
|
|
# define PLX_DMA_ARB1_1_P2L_LW_TRIG(X) ( ((X)& 7) << 16 )
|
|
# define PLX_DMA_ARB1_1_L2P_LR_TRIG(X) ( ((X)& 7) << 20 )
|
|
# define PLX_DMA_ARB1_1_L2P_PW_TRIG(X) ( ((X)& 7) << 24 )
|
|
# define PLX_DMA_ARB1_1_P2L_PR_TRIG(X) ( ((X)& 7) << 28 )
|
|
|
|
typedef struct _dmachain
|
|
{
|
|
ulong pciaddr;
|
|
ulong lcladdr;
|
|
ulong len;
|
|
ulong next;
|
|
} DMACHAIN;
|