mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-23 12:43:55 +08:00
acd877f4ec
coccicheck found this pattern which could be converted to PTR_ERR_OR_ZERO(). No functional changes. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
385 lines
9.7 KiB
C
385 lines
9.7 KiB
C
/*
|
|
* Copyright (c) 2015, Linaro Limited
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/extcon.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/reset.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/ulpi.h>
|
|
|
|
#define HSPHY_AHBBURST 0x0090
|
|
#define HSPHY_AHBMODE 0x0098
|
|
#define HSPHY_GENCONFIG 0x009c
|
|
#define HSPHY_GENCONFIG_2 0x00a0
|
|
|
|
#define HSPHY_USBCMD 0x0140
|
|
#define HSPHY_ULPI_VIEWPORT 0x0170
|
|
#define HSPHY_CTRL 0x0240
|
|
|
|
#define HSPHY_TXFIFO_IDLE_FORCE_DIS BIT(4)
|
|
#define HSPHY_SESS_VLD_CTRL_EN BIT(7)
|
|
#define HSPHY_POR_ASSERT BIT(0)
|
|
#define HSPHY_RETEN BIT(1)
|
|
|
|
#define HSPHY_SESS_VLD_CTRL BIT(25)
|
|
|
|
#define ULPI_PWR_CLK_MNG_REG 0x88
|
|
#define ULPI_PWR_OTG_COMP_DISABLE BIT(0)
|
|
|
|
#define ULPI_MISC_A 0x96
|
|
#define ULPI_MISC_A_VBUSVLDEXTSEL BIT(1)
|
|
#define ULPI_MISC_A_VBUSVLDEXT BIT(0)
|
|
|
|
#define HSPHY_3P3_MIN 3050000 /* uV */
|
|
#define HSPHY_3P3_MAX 3300000 /* uV */
|
|
|
|
#define HSPHY_1P8_MIN 1800000 /* uV */
|
|
#define HSPHY_1P8_MAX 1800000 /* uV */
|
|
|
|
#define HSPHY_VDD_MIN 5
|
|
#define HSPHY_VDD_MAX 7
|
|
|
|
struct phy_8x16 {
|
|
struct usb_phy phy;
|
|
void __iomem *regs;
|
|
struct clk *core_clk;
|
|
struct clk *iface_clk;
|
|
struct regulator_bulk_data regulator[3];
|
|
|
|
struct reset_control *phy_reset;
|
|
|
|
struct extcon_dev *vbus_edev;
|
|
struct notifier_block vbus_notify;
|
|
|
|
struct gpio_desc *switch_gpio;
|
|
struct notifier_block reboot_notify;
|
|
};
|
|
|
|
static int phy_8x16_notify_connect(struct usb_phy *phy,
|
|
enum usb_device_speed speed)
|
|
{
|
|
struct phy_8x16 *qphy = container_of(phy, struct phy_8x16, phy);
|
|
u32 val;
|
|
|
|
val = ULPI_MISC_A_VBUSVLDEXTSEL | ULPI_MISC_A_VBUSVLDEXT;
|
|
usb_phy_io_write(&qphy->phy, val, ULPI_SET(ULPI_MISC_A));
|
|
|
|
val = readl(qphy->regs + HSPHY_USBCMD);
|
|
val |= HSPHY_SESS_VLD_CTRL;
|
|
writel(val, qphy->regs + HSPHY_USBCMD);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int phy_8x16_notify_disconnect(struct usb_phy *phy,
|
|
enum usb_device_speed speed)
|
|
{
|
|
struct phy_8x16 *qphy = container_of(phy, struct phy_8x16, phy);
|
|
u32 val;
|
|
|
|
val = ULPI_MISC_A_VBUSVLDEXT | ULPI_MISC_A_VBUSVLDEXTSEL;
|
|
usb_phy_io_write(&qphy->phy, val, ULPI_CLR(ULPI_MISC_A));
|
|
|
|
val = readl(qphy->regs + HSPHY_USBCMD);
|
|
val &= ~HSPHY_SESS_VLD_CTRL;
|
|
writel(val, qphy->regs + HSPHY_USBCMD);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int phy_8x16_vbus_on(struct phy_8x16 *qphy)
|
|
{
|
|
phy_8x16_notify_connect(&qphy->phy, USB_SPEED_UNKNOWN);
|
|
|
|
/* Switch D+/D- lines to Device connector */
|
|
gpiod_set_value_cansleep(qphy->switch_gpio, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int phy_8x16_vbus_off(struct phy_8x16 *qphy)
|
|
{
|
|
phy_8x16_notify_disconnect(&qphy->phy, USB_SPEED_UNKNOWN);
|
|
|
|
/* Switch D+/D- lines to USB HUB */
|
|
gpiod_set_value_cansleep(qphy->switch_gpio, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int phy_8x16_vbus_notify(struct notifier_block *nb, unsigned long event,
|
|
void *ptr)
|
|
{
|
|
struct phy_8x16 *qphy = container_of(nb, struct phy_8x16, vbus_notify);
|
|
|
|
if (event)
|
|
phy_8x16_vbus_on(qphy);
|
|
else
|
|
phy_8x16_vbus_off(qphy);
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
static int phy_8x16_init(struct usb_phy *phy)
|
|
{
|
|
struct phy_8x16 *qphy = container_of(phy, struct phy_8x16, phy);
|
|
u32 val, init[] = {0x44, 0x6B, 0x24, 0x13};
|
|
u32 addr = ULPI_EXT_VENDOR_SPECIFIC;
|
|
int idx, state;
|
|
|
|
for (idx = 0; idx < ARRAY_SIZE(init); idx++)
|
|
usb_phy_io_write(phy, init[idx], addr + idx);
|
|
|
|
reset_control_reset(qphy->phy_reset);
|
|
|
|
/* Assert USB HSPHY_POR */
|
|
val = readl(qphy->regs + HSPHY_CTRL);
|
|
val |= HSPHY_POR_ASSERT;
|
|
writel(val, qphy->regs + HSPHY_CTRL);
|
|
|
|
/*
|
|
* wait for minimum 10 microseconds as suggested in HPG.
|
|
* Use a slightly larger value since the exact value didn't
|
|
* work 100% of the time.
|
|
*/
|
|
usleep_range(12, 15);
|
|
|
|
/* Deassert USB HSPHY_POR */
|
|
val = readl(qphy->regs + HSPHY_CTRL);
|
|
val &= ~HSPHY_POR_ASSERT;
|
|
writel(val, qphy->regs + HSPHY_CTRL);
|
|
|
|
usleep_range(10, 15);
|
|
|
|
writel(0x00, qphy->regs + HSPHY_AHBBURST);
|
|
writel(0x08, qphy->regs + HSPHY_AHBMODE);
|
|
|
|
/* workaround for rx buffer collision issue */
|
|
val = readl(qphy->regs + HSPHY_GENCONFIG);
|
|
val &= ~HSPHY_TXFIFO_IDLE_FORCE_DIS;
|
|
writel(val, qphy->regs + HSPHY_GENCONFIG);
|
|
|
|
val = readl(qphy->regs + HSPHY_GENCONFIG_2);
|
|
val |= HSPHY_SESS_VLD_CTRL_EN;
|
|
writel(val, qphy->regs + HSPHY_GENCONFIG_2);
|
|
|
|
val = ULPI_PWR_OTG_COMP_DISABLE;
|
|
usb_phy_io_write(phy, val, ULPI_SET(ULPI_PWR_CLK_MNG_REG));
|
|
|
|
state = extcon_get_cable_state_(qphy->vbus_edev, EXTCON_USB);
|
|
if (state)
|
|
phy_8x16_vbus_on(qphy);
|
|
else
|
|
phy_8x16_vbus_off(qphy);
|
|
|
|
val = usb_phy_io_read(&qphy->phy, ULPI_FUNC_CTRL);
|
|
val &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
|
|
val |= ULPI_FUNC_CTRL_OPMODE_NORMAL;
|
|
usb_phy_io_write(&qphy->phy, val, ULPI_FUNC_CTRL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void phy_8x16_shutdown(struct usb_phy *phy)
|
|
{
|
|
u32 val;
|
|
|
|
/* Put the controller in non-driving mode */
|
|
val = usb_phy_io_read(phy, ULPI_FUNC_CTRL);
|
|
val &= ~ULPI_FUNC_CTRL_OPMODE_MASK;
|
|
val |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING;
|
|
usb_phy_io_write(phy, val, ULPI_FUNC_CTRL);
|
|
}
|
|
|
|
static int phy_8x16_read_devicetree(struct phy_8x16 *qphy)
|
|
{
|
|
struct device *dev = qphy->phy.dev;
|
|
int ret;
|
|
|
|
qphy->core_clk = devm_clk_get(dev, "core");
|
|
if (IS_ERR(qphy->core_clk))
|
|
return PTR_ERR(qphy->core_clk);
|
|
|
|
qphy->iface_clk = devm_clk_get(dev, "iface");
|
|
if (IS_ERR(qphy->iface_clk))
|
|
return PTR_ERR(qphy->iface_clk);
|
|
|
|
qphy->regulator[0].supply = "v3p3";
|
|
qphy->regulator[1].supply = "v1p8";
|
|
qphy->regulator[2].supply = "vddcx";
|
|
|
|
ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(qphy->regulator),
|
|
qphy->regulator);
|
|
if (ret)
|
|
return ret;
|
|
|
|
qphy->phy_reset = devm_reset_control_get(dev, "phy");
|
|
if (IS_ERR(qphy->phy_reset))
|
|
return PTR_ERR(qphy->phy_reset);
|
|
|
|
qphy->switch_gpio = devm_gpiod_get_optional(dev, "switch",
|
|
GPIOD_OUT_LOW);
|
|
return PTR_ERR_OR_ZERO(qphy->switch_gpio);
|
|
}
|
|
|
|
static int phy_8x16_reboot_notify(struct notifier_block *this,
|
|
unsigned long code, void *unused)
|
|
{
|
|
struct phy_8x16 *qphy;
|
|
|
|
qphy = container_of(this, struct phy_8x16, reboot_notify);
|
|
|
|
/*
|
|
* Ensure that D+/D- lines are routed to uB connector, so
|
|
* we could load bootloader/kernel at next reboot_notify
|
|
*/
|
|
gpiod_set_value_cansleep(qphy->switch_gpio, 0);
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
static int phy_8x16_probe(struct platform_device *pdev)
|
|
{
|
|
struct phy_8x16 *qphy;
|
|
struct resource *res;
|
|
struct usb_phy *phy;
|
|
int ret;
|
|
|
|
qphy = devm_kzalloc(&pdev->dev, sizeof(*qphy), GFP_KERNEL);
|
|
if (!qphy)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, qphy);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!res)
|
|
return -EINVAL;
|
|
|
|
qphy->regs = devm_ioremap(&pdev->dev, res->start, resource_size(res));
|
|
if (!qphy->regs)
|
|
return -ENOMEM;
|
|
|
|
phy = &qphy->phy;
|
|
phy->dev = &pdev->dev;
|
|
phy->label = dev_name(&pdev->dev);
|
|
phy->init = phy_8x16_init;
|
|
phy->shutdown = phy_8x16_shutdown;
|
|
phy->notify_connect = phy_8x16_notify_connect;
|
|
phy->notify_disconnect = phy_8x16_notify_disconnect;
|
|
phy->io_priv = qphy->regs + HSPHY_ULPI_VIEWPORT;
|
|
phy->io_ops = &ulpi_viewport_access_ops;
|
|
phy->type = USB_PHY_TYPE_USB2;
|
|
|
|
ret = phy_8x16_read_devicetree(qphy);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
qphy->vbus_edev = extcon_get_edev_by_phandle(phy->dev, 0);
|
|
if (IS_ERR(qphy->vbus_edev))
|
|
return PTR_ERR(qphy->vbus_edev);
|
|
|
|
ret = clk_set_rate(qphy->core_clk, INT_MAX);
|
|
if (ret < 0)
|
|
dev_dbg(phy->dev, "Can't boost core clock\n");
|
|
|
|
ret = clk_prepare_enable(qphy->core_clk);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = clk_prepare_enable(qphy->iface_clk);
|
|
if (ret < 0)
|
|
goto off_core;
|
|
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(qphy->regulator),
|
|
qphy->regulator);
|
|
if (WARN_ON(ret))
|
|
goto off_clks;
|
|
|
|
qphy->vbus_notify.notifier_call = phy_8x16_vbus_notify;
|
|
ret = extcon_register_notifier(qphy->vbus_edev, EXTCON_USB,
|
|
&qphy->vbus_notify);
|
|
if (ret < 0)
|
|
goto off_power;
|
|
|
|
ret = usb_add_phy_dev(&qphy->phy);
|
|
if (ret)
|
|
goto off_extcon;
|
|
|
|
qphy->reboot_notify.notifier_call = phy_8x16_reboot_notify;
|
|
register_reboot_notifier(&qphy->reboot_notify);
|
|
|
|
return 0;
|
|
|
|
off_extcon:
|
|
extcon_unregister_notifier(qphy->vbus_edev, EXTCON_USB,
|
|
&qphy->vbus_notify);
|
|
off_power:
|
|
regulator_bulk_disable(ARRAY_SIZE(qphy->regulator), qphy->regulator);
|
|
off_clks:
|
|
clk_disable_unprepare(qphy->iface_clk);
|
|
off_core:
|
|
clk_disable_unprepare(qphy->core_clk);
|
|
return ret;
|
|
}
|
|
|
|
static int phy_8x16_remove(struct platform_device *pdev)
|
|
{
|
|
struct phy_8x16 *qphy = platform_get_drvdata(pdev);
|
|
|
|
unregister_reboot_notifier(&qphy->reboot_notify);
|
|
extcon_unregister_notifier(qphy->vbus_edev, EXTCON_USB,
|
|
&qphy->vbus_notify);
|
|
|
|
/*
|
|
* Ensure that D+/D- lines are routed to uB connector, so
|
|
* we could load bootloader/kernel at next reboot_notify
|
|
*/
|
|
gpiod_set_value_cansleep(qphy->switch_gpio, 0);
|
|
|
|
usb_remove_phy(&qphy->phy);
|
|
|
|
clk_disable_unprepare(qphy->iface_clk);
|
|
clk_disable_unprepare(qphy->core_clk);
|
|
regulator_bulk_disable(ARRAY_SIZE(qphy->regulator), qphy->regulator);
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id phy_8x16_dt_match[] = {
|
|
{ .compatible = "qcom,usb-8x16-phy" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, phy_8x16_dt_match);
|
|
|
|
static struct platform_driver phy_8x16_driver = {
|
|
.probe = phy_8x16_probe,
|
|
.remove = phy_8x16_remove,
|
|
.driver = {
|
|
.name = "phy-qcom-8x16-usb",
|
|
.of_match_table = phy_8x16_dt_match,
|
|
},
|
|
};
|
|
module_platform_driver(phy_8x16_driver);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DESCRIPTION("Qualcomm APQ8016/MSM8916 chipsets USB transceiver driver");
|