mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-21 11:44:01 +08:00
cdc194705d
This update includes the usual round of major driver updates (ncr5380, ufs, lpfc, be2iscsi, hisi_sas, storvsc, cxlflash, aacraid, megaraid_sas, ). There's also an assortment of minor fixes and the major update of switching a bunch of drivers to pci_alloc_irq_vectors from Christoph. Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com> -----BEGIN PGP SIGNATURE----- Version: GnuPG v2 iQIcBAABAgAGBQJYq5adAAoJEAVr7HOZEZN4bjUP/Atk7CSZVnC75pcYmncbEGCx ysOlEHK4uW2HhiAYk3PlYMk+pKrMHet2zsbbM9PHJfopdOHZ7Sq1+UZZVeqE1Zun 8pe0NhON+fZx7XAnevdEvnSSULQZ+AGfjZO72iUwkJiN3ozYaFtCITOyn49l4GpR ra9emskBh7CQOFW2voGn1AKeDijPYGx3+TO4AUrWjVMiByR06gb1bmImx+ljiUrs jzRJPfrt90ORcTdpMateyN2EXxudcASMhX03SJ6fRI84hPAhMCROMbTv8RnzOTE4 DPbnvbYUowlHt43iUhJHSwGdkRRaRBnkzQENBp1fNrNzZgF6vB7+kShxbonrYB2p gC4ewaJr0BNj+HsUnvTpe3WseiPOcfsnBsKilPLKBlm2dCKEXqFox/dj/T1uexxg HoyFrl3u8fyEqVHrzRS4M9t/njWh0NFmXxb0wBdj+lkVFTRErGSKQ8SfOqshuSGs P8NN88jy8vC7uqgzKBJ+UH3ehzn3qfBxasFHIC/e2awY9FqKjHGTxKMmSVpjXVxy wCvE2FQ3k/qEj2XSM6f7/NGytlSOlju5q1rFtHPW2M+TFSh0LJWCnmVjR/Zle9em pBWmtIgCv8W5b41zL2H94nLWAZbfdrrNU/XnX88l47LKnmorte/PGhpxu36NEsMS VCgreQmFMdMRY+WzDWl1 =cBQx -----END PGP SIGNATURE----- Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "This update includes the usual round of major driver updates (ncr5380, ufs, lpfc, be2iscsi, hisi_sas, storvsc, cxlflash, aacraid, megaraid_sas, ...). There's also an assortment of minor fixes and the major update of switching a bunch of drivers to pci_alloc_irq_vectors from Christoph" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (188 commits) scsi: megaraid_sas: handle dma_addr_t right on 32-bit scsi: megaraid_sas: array overflow in megasas_dump_frame() scsi: snic: switch to pci_irq_alloc_vectors scsi: megaraid_sas: driver version upgrade scsi: megaraid_sas: Change RAID_1_10_RMW_CMDS to RAID_1_PEER_CMDS and set value to 2 scsi: megaraid_sas: Indentation and smatch warning fixes scsi: megaraid_sas: Cleanup VD_EXT_DEBUG and SPAN_DEBUG related debug prints scsi: megaraid_sas: Increase internal command pool scsi: megaraid_sas: Use synchronize_irq to wait for IRQs to complete scsi: megaraid_sas: Bail out the driver load if ld_list_query fails scsi: megaraid_sas: Change build_mpt_mfi_pass_thru to return void scsi: megaraid_sas: During OCR, if get_ctrl_info fails do not continue with OCR scsi: megaraid_sas: Do not set fp_possible if TM capable for non-RW syspdIO, change fp_possible to bool scsi: megaraid_sas: Remove unused pd_index from megasas_build_ld_nonrw_fusion scsi: megaraid_sas: megasas_return_cmd does not memset IO frame to zero scsi: megaraid_sas: max_fw_cmds are decremented twice, remove duplicate scsi: megaraid_sas: update can_queue only if the new value is less scsi: megaraid_sas: Change max_cmd from u32 to u16 in all functions scsi: megaraid_sas: set pd_after_lb from MR_BuildRaidContext and initialize pDevHandle to MR_DEVHANDLE_INVALID scsi: megaraid_sas: latest controller OCR capability from FW before sending shutdown DCMD ...
667 lines
16 KiB
C
667 lines
16 KiB
C
/*
|
|
* Sun3 SCSI stuff by Erik Verbruggen (erik@bigmama.xtdnet.nl)
|
|
*
|
|
* Sun3 DMA routines added by Sam Creasey (sammy@sammy.net)
|
|
*
|
|
* VME support added by Sam Creasey
|
|
*
|
|
* TODO: modify this driver to support multiple Sun3 SCSI VME boards
|
|
*
|
|
* Adapted from mac_scsinew.c:
|
|
*/
|
|
/*
|
|
* Generic Macintosh NCR5380 driver
|
|
*
|
|
* Copyright 1998, Michael Schmitz <mschmitz@lbl.gov>
|
|
*
|
|
* derived in part from:
|
|
*/
|
|
/*
|
|
* Generic Generic NCR5380 driver
|
|
*
|
|
* Copyright 1995, Russell King
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/module.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/dvma.h>
|
|
|
|
#include <scsi/scsi_host.h>
|
|
|
|
/* minimum number of bytes to do dma on */
|
|
#define DMA_MIN_SIZE 129
|
|
|
|
/* Definitions for the core NCR5380 driver. */
|
|
|
|
#define NCR5380_implementation_fields /* none */
|
|
|
|
#define NCR5380_read(reg) in_8(hostdata->io + (reg))
|
|
#define NCR5380_write(reg, value) out_8(hostdata->io + (reg), value)
|
|
|
|
#define NCR5380_queue_command sun3scsi_queue_command
|
|
#define NCR5380_bus_reset sun3scsi_bus_reset
|
|
#define NCR5380_abort sun3scsi_abort
|
|
#define NCR5380_info sun3scsi_info
|
|
|
|
#define NCR5380_dma_xfer_len sun3scsi_dma_xfer_len
|
|
#define NCR5380_dma_recv_setup sun3scsi_dma_count
|
|
#define NCR5380_dma_send_setup sun3scsi_dma_count
|
|
#define NCR5380_dma_residual sun3scsi_dma_residual
|
|
|
|
#include "NCR5380.h"
|
|
|
|
/* dma regs start at regbase + 8, directly after the NCR regs */
|
|
struct sun3_dma_regs {
|
|
unsigned short dma_addr_hi; /* vme only */
|
|
unsigned short dma_addr_lo; /* vme only */
|
|
unsigned short dma_count_hi; /* vme only */
|
|
unsigned short dma_count_lo; /* vme only */
|
|
unsigned short udc_data; /* udc dma data reg (obio only) */
|
|
unsigned short udc_addr; /* uda dma addr reg (obio only) */
|
|
unsigned short fifo_data; /* fifo data reg,
|
|
* holds extra byte on odd dma reads
|
|
*/
|
|
unsigned short fifo_count;
|
|
unsigned short csr; /* control/status reg */
|
|
unsigned short bpack_hi; /* vme only */
|
|
unsigned short bpack_lo; /* vme only */
|
|
unsigned short ivect; /* vme only */
|
|
unsigned short fifo_count_hi; /* vme only */
|
|
};
|
|
|
|
/* ucd chip specific regs - live in dvma space */
|
|
struct sun3_udc_regs {
|
|
unsigned short rsel; /* select regs to load */
|
|
unsigned short addr_hi; /* high word of addr */
|
|
unsigned short addr_lo; /* low word */
|
|
unsigned short count; /* words to be xfer'd */
|
|
unsigned short mode_hi; /* high word of channel mode */
|
|
unsigned short mode_lo; /* low word of channel mode */
|
|
};
|
|
|
|
/* addresses of the udc registers */
|
|
#define UDC_MODE 0x38
|
|
#define UDC_CSR 0x2e /* command/status */
|
|
#define UDC_CHN_HI 0x26 /* chain high word */
|
|
#define UDC_CHN_LO 0x22 /* chain lo word */
|
|
#define UDC_CURA_HI 0x1a /* cur reg A high */
|
|
#define UDC_CURA_LO 0x0a /* cur reg A low */
|
|
#define UDC_CURB_HI 0x12 /* cur reg B high */
|
|
#define UDC_CURB_LO 0x02 /* cur reg B low */
|
|
#define UDC_MODE_HI 0x56 /* mode reg high */
|
|
#define UDC_MODE_LO 0x52 /* mode reg low */
|
|
#define UDC_COUNT 0x32 /* words to xfer */
|
|
|
|
/* some udc commands */
|
|
#define UDC_RESET 0
|
|
#define UDC_CHN_START 0xa0 /* start chain */
|
|
#define UDC_INT_ENABLE 0x32 /* channel 1 int on */
|
|
|
|
/* udc mode words */
|
|
#define UDC_MODE_HIWORD 0x40
|
|
#define UDC_MODE_LSEND 0xc2
|
|
#define UDC_MODE_LRECV 0xd2
|
|
|
|
/* udc reg selections */
|
|
#define UDC_RSEL_SEND 0x282
|
|
#define UDC_RSEL_RECV 0x182
|
|
|
|
/* bits in csr reg */
|
|
#define CSR_DMA_ACTIVE 0x8000
|
|
#define CSR_DMA_CONFLICT 0x4000
|
|
#define CSR_DMA_BUSERR 0x2000
|
|
|
|
#define CSR_FIFO_EMPTY 0x400 /* fifo flushed? */
|
|
#define CSR_SDB_INT 0x200 /* sbc interrupt pending */
|
|
#define CSR_DMA_INT 0x100 /* dma interrupt pending */
|
|
|
|
#define CSR_LEFT 0xc0
|
|
#define CSR_LEFT_3 0xc0
|
|
#define CSR_LEFT_2 0x80
|
|
#define CSR_LEFT_1 0x40
|
|
#define CSR_PACK_ENABLE 0x20
|
|
|
|
#define CSR_DMA_ENABLE 0x10
|
|
|
|
#define CSR_SEND 0x8 /* 1 = send 0 = recv */
|
|
#define CSR_FIFO 0x2 /* reset fifo */
|
|
#define CSR_INTR 0x4 /* interrupt enable */
|
|
#define CSR_SCSI 0x1
|
|
|
|
#define VME_DATA24 0x3d00
|
|
|
|
extern int sun3_map_test(unsigned long, char *);
|
|
|
|
static int setup_can_queue = -1;
|
|
module_param(setup_can_queue, int, 0);
|
|
static int setup_cmd_per_lun = -1;
|
|
module_param(setup_cmd_per_lun, int, 0);
|
|
static int setup_sg_tablesize = -1;
|
|
module_param(setup_sg_tablesize, int, 0);
|
|
static int setup_hostid = -1;
|
|
module_param(setup_hostid, int, 0);
|
|
|
|
/* ms to wait after hitting dma regs */
|
|
#define SUN3_DMA_DELAY 10
|
|
|
|
/* dvma buffer to allocate -- 32k should hopefully be more than sufficient */
|
|
#define SUN3_DVMA_BUFSIZE 0xe000
|
|
|
|
static struct scsi_cmnd *sun3_dma_setup_done;
|
|
static volatile struct sun3_dma_regs *dregs;
|
|
static struct sun3_udc_regs *udc_regs;
|
|
static unsigned char *sun3_dma_orig_addr;
|
|
static unsigned long sun3_dma_orig_count;
|
|
static int sun3_dma_active;
|
|
static unsigned long last_residual;
|
|
|
|
#ifndef SUN3_SCSI_VME
|
|
/* dma controller register access functions */
|
|
|
|
static inline unsigned short sun3_udc_read(unsigned char reg)
|
|
{
|
|
unsigned short ret;
|
|
|
|
dregs->udc_addr = UDC_CSR;
|
|
udelay(SUN3_DMA_DELAY);
|
|
ret = dregs->udc_data;
|
|
udelay(SUN3_DMA_DELAY);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static inline void sun3_udc_write(unsigned short val, unsigned char reg)
|
|
{
|
|
dregs->udc_addr = reg;
|
|
udelay(SUN3_DMA_DELAY);
|
|
dregs->udc_data = val;
|
|
udelay(SUN3_DMA_DELAY);
|
|
}
|
|
#endif
|
|
|
|
// safe bits for the CSR
|
|
#define CSR_GOOD 0x060f
|
|
|
|
static irqreturn_t scsi_sun3_intr(int irq, void *dev)
|
|
{
|
|
struct Scsi_Host *instance = dev;
|
|
unsigned short csr = dregs->csr;
|
|
int handled = 0;
|
|
|
|
#ifdef SUN3_SCSI_VME
|
|
dregs->csr &= ~CSR_DMA_ENABLE;
|
|
#endif
|
|
|
|
if(csr & ~CSR_GOOD) {
|
|
if (csr & CSR_DMA_BUSERR)
|
|
shost_printk(KERN_ERR, instance, "bus error in DMA\n");
|
|
if (csr & CSR_DMA_CONFLICT)
|
|
shost_printk(KERN_ERR, instance, "DMA conflict\n");
|
|
handled = 1;
|
|
}
|
|
|
|
if(csr & (CSR_SDB_INT | CSR_DMA_INT)) {
|
|
NCR5380_intr(irq, dev);
|
|
handled = 1;
|
|
}
|
|
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
/* sun3scsi_dma_setup() -- initialize the dma controller for a read/write */
|
|
static int sun3scsi_dma_setup(struct NCR5380_hostdata *hostdata,
|
|
unsigned char *data, int count, int write_flag)
|
|
{
|
|
void *addr;
|
|
|
|
if(sun3_dma_orig_addr != NULL)
|
|
dvma_unmap(sun3_dma_orig_addr);
|
|
|
|
#ifdef SUN3_SCSI_VME
|
|
addr = (void *)dvma_map_vme((unsigned long) data, count);
|
|
#else
|
|
addr = (void *)dvma_map((unsigned long) data, count);
|
|
#endif
|
|
|
|
sun3_dma_orig_addr = addr;
|
|
sun3_dma_orig_count = count;
|
|
|
|
#ifndef SUN3_SCSI_VME
|
|
dregs->fifo_count = 0;
|
|
sun3_udc_write(UDC_RESET, UDC_CSR);
|
|
|
|
/* reset fifo */
|
|
dregs->csr &= ~CSR_FIFO;
|
|
dregs->csr |= CSR_FIFO;
|
|
#endif
|
|
|
|
/* set direction */
|
|
if(write_flag)
|
|
dregs->csr |= CSR_SEND;
|
|
else
|
|
dregs->csr &= ~CSR_SEND;
|
|
|
|
#ifdef SUN3_SCSI_VME
|
|
dregs->csr |= CSR_PACK_ENABLE;
|
|
|
|
dregs->dma_addr_hi = ((unsigned long)addr >> 16);
|
|
dregs->dma_addr_lo = ((unsigned long)addr & 0xffff);
|
|
|
|
dregs->dma_count_hi = 0;
|
|
dregs->dma_count_lo = 0;
|
|
dregs->fifo_count_hi = 0;
|
|
dregs->fifo_count = 0;
|
|
#else
|
|
/* byte count for fifo */
|
|
dregs->fifo_count = count;
|
|
|
|
sun3_udc_write(UDC_RESET, UDC_CSR);
|
|
|
|
/* reset fifo */
|
|
dregs->csr &= ~CSR_FIFO;
|
|
dregs->csr |= CSR_FIFO;
|
|
|
|
if(dregs->fifo_count != count) {
|
|
shost_printk(KERN_ERR, hostdata->host,
|
|
"FIFO mismatch %04x not %04x\n",
|
|
dregs->fifo_count, (unsigned int) count);
|
|
NCR5380_dprint(NDEBUG_DMA, hostdata->host);
|
|
}
|
|
|
|
/* setup udc */
|
|
udc_regs->addr_hi = (((unsigned long)(addr) & 0xff0000) >> 8);
|
|
udc_regs->addr_lo = ((unsigned long)(addr) & 0xffff);
|
|
udc_regs->count = count/2; /* count in words */
|
|
udc_regs->mode_hi = UDC_MODE_HIWORD;
|
|
if(write_flag) {
|
|
if(count & 1)
|
|
udc_regs->count++;
|
|
udc_regs->mode_lo = UDC_MODE_LSEND;
|
|
udc_regs->rsel = UDC_RSEL_SEND;
|
|
} else {
|
|
udc_regs->mode_lo = UDC_MODE_LRECV;
|
|
udc_regs->rsel = UDC_RSEL_RECV;
|
|
}
|
|
|
|
/* announce location of regs block */
|
|
sun3_udc_write(((dvma_vtob(udc_regs) & 0xff0000) >> 8),
|
|
UDC_CHN_HI);
|
|
|
|
sun3_udc_write((dvma_vtob(udc_regs) & 0xffff), UDC_CHN_LO);
|
|
|
|
/* set dma master on */
|
|
sun3_udc_write(0xd, UDC_MODE);
|
|
|
|
/* interrupt enable */
|
|
sun3_udc_write(UDC_INT_ENABLE, UDC_CSR);
|
|
#endif
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
static int sun3scsi_dma_count(struct NCR5380_hostdata *hostdata,
|
|
unsigned char *data, int count)
|
|
{
|
|
return count;
|
|
}
|
|
|
|
static inline int sun3scsi_dma_recv_setup(struct NCR5380_hostdata *hostdata,
|
|
unsigned char *data, int count)
|
|
{
|
|
return sun3scsi_dma_setup(hostdata, data, count, 0);
|
|
}
|
|
|
|
static inline int sun3scsi_dma_send_setup(struct NCR5380_hostdata *hostdata,
|
|
unsigned char *data, int count)
|
|
{
|
|
return sun3scsi_dma_setup(hostdata, data, count, 1);
|
|
}
|
|
|
|
static int sun3scsi_dma_residual(struct NCR5380_hostdata *hostdata)
|
|
{
|
|
return last_residual;
|
|
}
|
|
|
|
static int sun3scsi_dma_xfer_len(struct NCR5380_hostdata *hostdata,
|
|
struct scsi_cmnd *cmd)
|
|
{
|
|
int wanted_len = cmd->SCp.this_residual;
|
|
|
|
if (wanted_len < DMA_MIN_SIZE || blk_rq_is_passthrough(cmd->request))
|
|
return 0;
|
|
|
|
return wanted_len;
|
|
}
|
|
|
|
static inline int sun3scsi_dma_start(unsigned long count, unsigned char *data)
|
|
{
|
|
#ifdef SUN3_SCSI_VME
|
|
unsigned short csr;
|
|
|
|
csr = dregs->csr;
|
|
|
|
dregs->dma_count_hi = (sun3_dma_orig_count >> 16);
|
|
dregs->dma_count_lo = (sun3_dma_orig_count & 0xffff);
|
|
|
|
dregs->fifo_count_hi = (sun3_dma_orig_count >> 16);
|
|
dregs->fifo_count = (sun3_dma_orig_count & 0xffff);
|
|
|
|
/* if(!(csr & CSR_DMA_ENABLE))
|
|
* dregs->csr |= CSR_DMA_ENABLE;
|
|
*/
|
|
#else
|
|
sun3_udc_write(UDC_CHN_START, UDC_CSR);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* clean up after our dma is done */
|
|
static int sun3scsi_dma_finish(int write_flag)
|
|
{
|
|
unsigned short __maybe_unused count;
|
|
unsigned short fifo;
|
|
int ret = 0;
|
|
|
|
sun3_dma_active = 0;
|
|
|
|
#ifdef SUN3_SCSI_VME
|
|
dregs->csr &= ~CSR_DMA_ENABLE;
|
|
|
|
fifo = dregs->fifo_count;
|
|
if (write_flag) {
|
|
if ((fifo > 0) && (fifo < sun3_dma_orig_count))
|
|
fifo++;
|
|
}
|
|
|
|
last_residual = fifo;
|
|
/* empty bytes from the fifo which didn't make it */
|
|
if ((!write_flag) && (dregs->csr & CSR_LEFT)) {
|
|
unsigned char *vaddr;
|
|
|
|
vaddr = (unsigned char *)dvma_vmetov(sun3_dma_orig_addr);
|
|
|
|
vaddr += (sun3_dma_orig_count - fifo);
|
|
vaddr--;
|
|
|
|
switch (dregs->csr & CSR_LEFT) {
|
|
case CSR_LEFT_3:
|
|
*vaddr = (dregs->bpack_lo & 0xff00) >> 8;
|
|
vaddr--;
|
|
|
|
case CSR_LEFT_2:
|
|
*vaddr = (dregs->bpack_hi & 0x00ff);
|
|
vaddr--;
|
|
|
|
case CSR_LEFT_1:
|
|
*vaddr = (dregs->bpack_hi & 0xff00) >> 8;
|
|
break;
|
|
}
|
|
}
|
|
#else
|
|
// check to empty the fifo on a read
|
|
if(!write_flag) {
|
|
int tmo = 20000; /* .2 sec */
|
|
|
|
while(1) {
|
|
if(dregs->csr & CSR_FIFO_EMPTY)
|
|
break;
|
|
|
|
if(--tmo <= 0) {
|
|
printk("sun3scsi: fifo failed to empty!\n");
|
|
return 1;
|
|
}
|
|
udelay(10);
|
|
}
|
|
}
|
|
|
|
dregs->udc_addr = 0x32;
|
|
udelay(SUN3_DMA_DELAY);
|
|
count = 2 * dregs->udc_data;
|
|
udelay(SUN3_DMA_DELAY);
|
|
|
|
fifo = dregs->fifo_count;
|
|
last_residual = fifo;
|
|
|
|
/* empty bytes from the fifo which didn't make it */
|
|
if((!write_flag) && (count - fifo) == 2) {
|
|
unsigned short data;
|
|
unsigned char *vaddr;
|
|
|
|
data = dregs->fifo_data;
|
|
vaddr = (unsigned char *)dvma_btov(sun3_dma_orig_addr);
|
|
|
|
vaddr += (sun3_dma_orig_count - fifo);
|
|
|
|
vaddr[-2] = (data & 0xff00) >> 8;
|
|
vaddr[-1] = (data & 0xff);
|
|
}
|
|
#endif
|
|
|
|
dvma_unmap(sun3_dma_orig_addr);
|
|
sun3_dma_orig_addr = NULL;
|
|
|
|
#ifdef SUN3_SCSI_VME
|
|
dregs->dma_addr_hi = 0;
|
|
dregs->dma_addr_lo = 0;
|
|
dregs->dma_count_hi = 0;
|
|
dregs->dma_count_lo = 0;
|
|
|
|
dregs->fifo_count = 0;
|
|
dregs->fifo_count_hi = 0;
|
|
|
|
dregs->csr &= ~CSR_SEND;
|
|
/* dregs->csr |= CSR_DMA_ENABLE; */
|
|
#else
|
|
sun3_udc_write(UDC_RESET, UDC_CSR);
|
|
dregs->fifo_count = 0;
|
|
dregs->csr &= ~CSR_SEND;
|
|
|
|
/* reset fifo */
|
|
dregs->csr &= ~CSR_FIFO;
|
|
dregs->csr |= CSR_FIFO;
|
|
#endif
|
|
|
|
sun3_dma_setup_done = NULL;
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
#include "NCR5380.c"
|
|
|
|
#ifdef SUN3_SCSI_VME
|
|
#define SUN3_SCSI_NAME "Sun3 NCR5380 VME SCSI"
|
|
#define DRV_MODULE_NAME "sun3_scsi_vme"
|
|
#else
|
|
#define SUN3_SCSI_NAME "Sun3 NCR5380 SCSI"
|
|
#define DRV_MODULE_NAME "sun3_scsi"
|
|
#endif
|
|
|
|
#define PFX DRV_MODULE_NAME ": "
|
|
|
|
static struct scsi_host_template sun3_scsi_template = {
|
|
.module = THIS_MODULE,
|
|
.proc_name = DRV_MODULE_NAME,
|
|
.name = SUN3_SCSI_NAME,
|
|
.info = sun3scsi_info,
|
|
.queuecommand = sun3scsi_queue_command,
|
|
.eh_abort_handler = sun3scsi_abort,
|
|
.eh_bus_reset_handler = sun3scsi_bus_reset,
|
|
.can_queue = 16,
|
|
.this_id = 7,
|
|
.sg_tablesize = SG_NONE,
|
|
.cmd_per_lun = 2,
|
|
.use_clustering = DISABLE_CLUSTERING,
|
|
.cmd_size = NCR5380_CMD_SIZE,
|
|
};
|
|
|
|
static int __init sun3_scsi_probe(struct platform_device *pdev)
|
|
{
|
|
struct Scsi_Host *instance;
|
|
struct NCR5380_hostdata *hostdata;
|
|
int error;
|
|
struct resource *irq, *mem;
|
|
void __iomem *ioaddr;
|
|
int host_flags = 0;
|
|
#ifdef SUN3_SCSI_VME
|
|
int i;
|
|
#endif
|
|
|
|
if (setup_can_queue > 0)
|
|
sun3_scsi_template.can_queue = setup_can_queue;
|
|
if (setup_cmd_per_lun > 0)
|
|
sun3_scsi_template.cmd_per_lun = setup_cmd_per_lun;
|
|
if (setup_sg_tablesize >= 0)
|
|
sun3_scsi_template.sg_tablesize = setup_sg_tablesize;
|
|
if (setup_hostid >= 0)
|
|
sun3_scsi_template.this_id = setup_hostid & 7;
|
|
|
|
#ifdef SUN3_SCSI_VME
|
|
ioaddr = NULL;
|
|
for (i = 0; i < 2; i++) {
|
|
unsigned char x;
|
|
|
|
irq = platform_get_resource(pdev, IORESOURCE_IRQ, i);
|
|
mem = platform_get_resource(pdev, IORESOURCE_MEM, i);
|
|
if (!irq || !mem)
|
|
break;
|
|
|
|
ioaddr = sun3_ioremap(mem->start, resource_size(mem),
|
|
SUN3_PAGE_TYPE_VME16);
|
|
dregs = (struct sun3_dma_regs *)(ioaddr + 8);
|
|
|
|
if (sun3_map_test((unsigned long)dregs, &x)) {
|
|
unsigned short oldcsr;
|
|
|
|
oldcsr = dregs->csr;
|
|
dregs->csr = 0;
|
|
udelay(SUN3_DMA_DELAY);
|
|
if (dregs->csr == 0x1400)
|
|
break;
|
|
|
|
dregs->csr = oldcsr;
|
|
}
|
|
|
|
iounmap(ioaddr);
|
|
ioaddr = NULL;
|
|
}
|
|
if (!ioaddr)
|
|
return -ENODEV;
|
|
#else
|
|
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
|
|
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!irq || !mem)
|
|
return -ENODEV;
|
|
|
|
ioaddr = ioremap(mem->start, resource_size(mem));
|
|
dregs = (struct sun3_dma_regs *)(ioaddr + 8);
|
|
|
|
udc_regs = dvma_malloc(sizeof(struct sun3_udc_regs));
|
|
if (!udc_regs) {
|
|
pr_err(PFX "couldn't allocate DVMA memory!\n");
|
|
iounmap(ioaddr);
|
|
return -ENOMEM;
|
|
}
|
|
#endif
|
|
|
|
instance = scsi_host_alloc(&sun3_scsi_template,
|
|
sizeof(struct NCR5380_hostdata));
|
|
if (!instance) {
|
|
error = -ENOMEM;
|
|
goto fail_alloc;
|
|
}
|
|
|
|
instance->irq = irq->start;
|
|
|
|
hostdata = shost_priv(instance);
|
|
hostdata->base = mem->start;
|
|
hostdata->io = ioaddr;
|
|
|
|
error = NCR5380_init(instance, host_flags);
|
|
if (error)
|
|
goto fail_init;
|
|
|
|
error = request_irq(instance->irq, scsi_sun3_intr, 0,
|
|
"NCR5380", instance);
|
|
if (error) {
|
|
pr_err(PFX "scsi%d: IRQ %d not free, bailing out\n",
|
|
instance->host_no, instance->irq);
|
|
goto fail_irq;
|
|
}
|
|
|
|
dregs->csr = 0;
|
|
udelay(SUN3_DMA_DELAY);
|
|
dregs->csr = CSR_SCSI | CSR_FIFO | CSR_INTR;
|
|
udelay(SUN3_DMA_DELAY);
|
|
dregs->fifo_count = 0;
|
|
#ifdef SUN3_SCSI_VME
|
|
dregs->fifo_count_hi = 0;
|
|
dregs->dma_addr_hi = 0;
|
|
dregs->dma_addr_lo = 0;
|
|
dregs->dma_count_hi = 0;
|
|
dregs->dma_count_lo = 0;
|
|
|
|
dregs->ivect = VME_DATA24 | (instance->irq & 0xff);
|
|
#endif
|
|
|
|
NCR5380_maybe_reset_bus(instance);
|
|
|
|
error = scsi_add_host(instance, NULL);
|
|
if (error)
|
|
goto fail_host;
|
|
|
|
platform_set_drvdata(pdev, instance);
|
|
|
|
scsi_scan_host(instance);
|
|
return 0;
|
|
|
|
fail_host:
|
|
free_irq(instance->irq, instance);
|
|
fail_irq:
|
|
NCR5380_exit(instance);
|
|
fail_init:
|
|
scsi_host_put(instance);
|
|
fail_alloc:
|
|
if (udc_regs)
|
|
dvma_free(udc_regs);
|
|
iounmap(ioaddr);
|
|
return error;
|
|
}
|
|
|
|
static int __exit sun3_scsi_remove(struct platform_device *pdev)
|
|
{
|
|
struct Scsi_Host *instance = platform_get_drvdata(pdev);
|
|
struct NCR5380_hostdata *hostdata = shost_priv(instance);
|
|
void __iomem *ioaddr = hostdata->io;
|
|
|
|
scsi_remove_host(instance);
|
|
free_irq(instance->irq, instance);
|
|
NCR5380_exit(instance);
|
|
scsi_host_put(instance);
|
|
if (udc_regs)
|
|
dvma_free(udc_regs);
|
|
iounmap(ioaddr);
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver sun3_scsi_driver = {
|
|
.remove = __exit_p(sun3_scsi_remove),
|
|
.driver = {
|
|
.name = DRV_MODULE_NAME,
|
|
},
|
|
};
|
|
|
|
module_platform_driver_probe(sun3_scsi_driver, sun3_scsi_probe);
|
|
|
|
MODULE_ALIAS("platform:" DRV_MODULE_NAME);
|
|
MODULE_LICENSE("GPL");
|