renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 11:44:01 +08:00
Code
7c89717f82
linux-next/drivers/mfd/wm8994-core.c
Viresh Kumar 202b56890a mfd: wm8994-core: Don't use managed regulator bulk get API 
The kernel WARNs and then crashes today if wm8994_device_init() fails
after calling devm_regulator_bulk_get().

That happens because there are multiple devices involved here and the
order in which managed resources are freed isn't correct.

The regulators are added as children of wm8994->dev.  Whereas,
devm_regulator_bulk_get() receives wm8994->dev as the device, though it
gets the same regulators which were added as children of wm8994->dev
earlier.

During failures, the children are removed first and the core eventually
calls regulator_unregister() for them. As regulator_put() was never done
for them (opposite of devm_regulator_bulk_get()), the kernel WARNs at

	WARN_ON(rdev->open_count);

And eventually it crashes from debugfs_remove_recursive().

Fix the kernel warnings and crashes by using regulator_bulk_get()
instead of devm_regulator_bulk_get() and explicitly freeing the supplies
in exit paths.

Tested on Exynos 5250, dual core ARM A15 machine.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2016-11-29 08:21:27 +00:00

699 lines
16 KiB
C
Raw Blame History

/*
* wm8994-core.c -- Device access for Wolfson WM8994
*
* Copyright 2009 Wolfson Microelectronics PLC.
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/err.h>
#include <linux/delay.h>
#include <linux/mfd/core.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
#include <linux/pm_runtime.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/regulator/machine.h>
#include <linux/mfd/wm8994/core.h>
#include <linux/mfd/wm8994/pdata.h>
#include <linux/mfd/wm8994/registers.h>
#include "wm8994.h"
static const struct mfd_cell wm8994_regulator_devs[] = {
{
.name = "wm8994-ldo",
.id = 0,
.pm_runtime_no_callbacks = true,
},
{
.name = "wm8994-ldo",
.id = 1,
.pm_runtime_no_callbacks = true,
},
};
static struct resource wm8994_codec_resources[] = {
{
.start = WM8994_IRQ_TEMP_SHUT,
.end = WM8994_IRQ_TEMP_WARN,
.flags = IORESOURCE_IRQ,
},
};
static struct resource wm8994_gpio_resources[] = {
{
.start = WM8994_IRQ_GPIO(1),
.end = WM8994_IRQ_GPIO(11),
.flags = IORESOURCE_IRQ,
},
};
static const struct mfd_cell wm8994_devs[] = {
{
.name = "wm8994-codec",
.num_resources = ARRAY_SIZE(wm8994_codec_resources),
.resources = wm8994_codec_resources,
},
{
.name = "wm8994-gpio",
.num_resources = ARRAY_SIZE(wm8994_gpio_resources),
.resources = wm8994_gpio_resources,
.pm_runtime_no_callbacks = true,
},
};
/*
* Supplies for the main bulk of CODEC; the LDO supplies are ignored
* and should be handled via the standard regulator API supply
* management.
*/
static const char *wm1811_main_supplies[] = {
"DBVDD1",
"DBVDD2",
"DBVDD3",
"DCVDD",
"AVDD1",
"AVDD2",
"CPVDD",
"SPKVDD1",
"SPKVDD2",
};
static const char *wm8994_main_supplies[] = {
"DBVDD",
"DCVDD",
"AVDD1",
"AVDD2",
"CPVDD",
"SPKVDD1",
"SPKVDD2",
};
static const char *wm8958_main_supplies[] = {
"DBVDD1",
"DBVDD2",
"DBVDD3",
"DCVDD",
"AVDD1",
"AVDD2",
"CPVDD",
"SPKVDD1",
"SPKVDD2",
};
#ifdef CONFIG_PM
static int wm8994_suspend(struct device *dev)
{
struct wm8994 *wm8994 = dev_get_drvdata(dev);
int ret;
/* Don't actually go through with the suspend if the CODEC is
* still active for accessory detect. */
switch (wm8994->type) {
case WM8958:
case WM1811:
ret = wm8994_reg_read(wm8994, WM8958_MIC_DETECT_1);
if (ret < 0) {
dev_err(dev, "Failed to read power status: %d\n", ret);
} else if (ret & WM8958_MICD_ENA) {
dev_dbg(dev, "CODEC still active, ignoring suspend\n");
return 0;
}
break;
default:
break;
}
/* Disable LDO pulldowns while the device is suspended if we
* don't know that something will be driving them. */
if (!wm8994->ldo_ena_always_driven)
wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD,
WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD);
/* Explicitly put the device into reset in case regulators
* don't get disabled in order to ensure consistent restart.
*/
wm8994_reg_write(wm8994, WM8994_SOFTWARE_RESET,
wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET));
regcache_mark_dirty(wm8994->regmap);
/* Restore GPIO registers to prevent problems with mismatched
* pin configurations.
*/
ret = regcache_sync_region(wm8994->regmap, WM8994_GPIO_1,
WM8994_GPIO_11);
if (ret != 0)
dev_err(dev, "Failed to restore GPIO registers: %d\n", ret);
/* In case one of the GPIOs is used as a wake input. */
ret = regcache_sync_region(wm8994->regmap,
WM8994_INTERRUPT_STATUS_1_MASK,
WM8994_INTERRUPT_STATUS_1_MASK);
if (ret != 0)
dev_err(dev, "Failed to restore interrupt mask: %d\n", ret);
regcache_cache_only(wm8994->regmap, true);
wm8994->suspended = true;
ret = regulator_bulk_disable(wm8994->num_supplies,
wm8994->supplies);
if (ret != 0) {
dev_err(dev, "Failed to disable supplies: %d\n", ret);
return ret;
}
return 0;
}
static int wm8994_resume(struct device *dev)
{
struct wm8994 *wm8994 = dev_get_drvdata(dev);
int ret;
/* We may have lied to the PM core about suspending */
if (!wm8994->suspended)
return 0;
ret = regulator_bulk_enable(wm8994->num_supplies,
wm8994->supplies);
if (ret != 0) {
dev_err(dev, "Failed to enable supplies: %d\n", ret);
return ret;
}
regcache_cache_only(wm8994->regmap, false);
ret = regcache_sync(wm8994->regmap);
if (ret != 0) {
dev_err(dev, "Failed to restore register map: %d\n", ret);
goto err_enable;
}
/* Disable LDO pulldowns while the device is active */
wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD,
0);
wm8994->suspended = false;
return 0;
err_enable:
regulator_bulk_disable(wm8994->num_supplies, wm8994->supplies);
return ret;
}
#endif
#ifdef CONFIG_REGULATOR
static int wm8994_ldo_in_use(struct wm8994_pdata *pdata, int ldo)
{
struct wm8994_ldo_pdata *ldo_pdata;
if (!pdata)
return 0;
ldo_pdata = &pdata->ldo[ldo];
if (!ldo_pdata->init_data)
return 0;
return ldo_pdata->init_data->num_consumer_supplies != 0;
}
#else
static int wm8994_ldo_in_use(struct wm8994_pdata *pdata, int ldo)
{
return 0;
}
#endif
static const struct reg_sequence wm8994_revc_patch[] = {
{ 0x102, 0x3 },
{ 0x56, 0x3 },
{ 0x817, 0x0 },
{ 0x102, 0x0 },
};
static const struct reg_sequence wm8958_reva_patch[] = {
{ 0x102, 0x3 },
{ 0xcb, 0x81 },
{ 0x817, 0x0 },
{ 0x102, 0x0 },
};
static const struct reg_sequence wm1811_reva_patch[] = {
{ 0x102, 0x3 },
{ 0x56, 0xc07 },
{ 0x5d, 0x7e },
{ 0x5e, 0x0 },
{ 0x102, 0x0 },
};
#ifdef CONFIG_OF
static int wm8994_set_pdata_from_of(struct wm8994 *wm8994)
{
struct device_node *np = wm8994->dev->of_node;
struct wm8994_pdata *pdata = &wm8994->pdata;
int i;
if (!np)
return 0;
if (of_property_read_u32_array(np, "wlf,gpio-cfg", pdata->gpio_defaults,
ARRAY_SIZE(pdata->gpio_defaults)) >= 0) {
for (i = 0; i < ARRAY_SIZE(pdata->gpio_defaults); i++) {
if (wm8994->pdata.gpio_defaults[i] == 0)
pdata->gpio_defaults[i]
= WM8994_CONFIGURE_GPIO;
}
}
of_property_read_u32_array(np, "wlf,micbias-cfg", pdata->micbias,
ARRAY_SIZE(pdata->micbias));
pdata->lineout1_diff = true;
pdata->lineout2_diff = true;
if (of_find_property(np, "wlf,lineout1-se", NULL))
pdata->lineout1_diff = false;
if (of_find_property(np, "wlf,lineout2-se", NULL))
pdata->lineout2_diff = false;
if (of_find_property(np, "wlf,lineout1-feedback", NULL))
pdata->lineout1fb = true;
if (of_find_property(np, "wlf,lineout2-feedback", NULL))
pdata->lineout2fb = true;
if (of_find_property(np, "wlf,ldoena-always-driven", NULL))
pdata->lineout2fb = true;
pdata->ldo[0].enable = of_get_named_gpio(np, "wlf,ldo1ena", 0);
if (pdata->ldo[0].enable < 0)
pdata->ldo[0].enable = 0;
pdata->ldo[1].enable = of_get_named_gpio(np, "wlf,ldo2ena", 0);
if (pdata->ldo[1].enable < 0)
pdata->ldo[1].enable = 0;
return 0;
}
#else
static int wm8994_set_pdata_from_of(struct wm8994 *wm8994)
{
return 0;
}
#endif
/*
* Instantiate the generic non-control parts of the device.
*/
static int wm8994_device_init(struct wm8994 *wm8994, int irq)
{
struct wm8994_pdata *pdata;
struct regmap_config *regmap_config;
const struct reg_sequence *regmap_patch = NULL;
const char *devname;
int ret, i, patch_regs = 0;
int pulls = 0;
if (dev_get_platdata(wm8994->dev)) {
pdata = dev_get_platdata(wm8994->dev);
wm8994->pdata = *pdata;
}
pdata = &wm8994->pdata;
ret = wm8994_set_pdata_from_of(wm8994);
if (ret != 0)
return ret;
dev_set_drvdata(wm8994->dev, wm8994);
/* Add the on-chip regulators first for bootstrapping */
ret = mfd_add_devices(wm8994->dev, 0,
wm8994_regulator_devs,
ARRAY_SIZE(wm8994_regulator_devs),
NULL, 0, NULL);
if (ret != 0) {
dev_err(wm8994->dev, "Failed to add children: %d\n", ret);
goto err;
}
switch (wm8994->type) {
case WM1811:
wm8994->num_supplies = ARRAY_SIZE(wm1811_main_supplies);
break;
case WM8994:
wm8994->num_supplies = ARRAY_SIZE(wm8994_main_supplies);
break;
case WM8958:
wm8994->num_supplies = ARRAY_SIZE(wm8958_main_supplies);
break;
default:
BUG();
goto err;
}
wm8994->supplies = devm_kzalloc(wm8994->dev,
sizeof(struct regulator_bulk_data) *
wm8994->num_supplies, GFP_KERNEL);
if (!wm8994->supplies) {
ret = -ENOMEM;
goto err;
}
switch (wm8994->type) {
case WM1811:
for (i = 0; i < ARRAY_SIZE(wm1811_main_supplies); i++)
wm8994->supplies[i].supply = wm1811_main_supplies[i];
break;
case WM8994:
for (i = 0; i < ARRAY_SIZE(wm8994_main_supplies); i++)
wm8994->supplies[i].supply = wm8994_main_supplies[i];
break;
case WM8958:
for (i = 0; i < ARRAY_SIZE(wm8958_main_supplies); i++)
wm8994->supplies[i].supply = wm8958_main_supplies[i];
break;
default:
BUG();
goto err;
}
/*
* Can't use devres helper here as some of the supplies are provided by
* wm8994->dev's children (regulators) and those regulators are
* unregistered by the devres core before the supplies are freed.
*/
ret = regulator_bulk_get(wm8994->dev, wm8994->num_supplies,
wm8994->supplies);
if (ret != 0) {
dev_err(wm8994->dev, "Failed to get supplies: %d\n", ret);
goto err;
}
ret = regulator_bulk_enable(wm8994->num_supplies, wm8994->supplies);
if (ret != 0) {
dev_err(wm8994->dev, "Failed to enable supplies: %d\n", ret);
goto err_regulator_free;
}
ret = wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET);
if (ret < 0) {
dev_err(wm8994->dev, "Failed to read ID register\n");
goto err_enable;
}
switch (ret) {
case 0x1811:
devname = "WM1811";
if (wm8994->type != WM1811)
dev_warn(wm8994->dev, "Device registered as type %d\n",
wm8994->type);
wm8994->type = WM1811;
break;
case 0x8994:
devname = "WM8994";
if (wm8994->type != WM8994)
dev_warn(wm8994->dev, "Device registered as type %d\n",
wm8994->type);
wm8994->type = WM8994;
break;
case 0x8958:
devname = "WM8958";
if (wm8994->type != WM8958)
dev_warn(wm8994->dev, "Device registered as type %d\n",
wm8994->type);
wm8994->type = WM8958;
break;
default:
dev_err(wm8994->dev, "Device is not a WM8994, ID is %x\n",
ret);
ret = -EINVAL;
goto err_enable;
}
ret = wm8994_reg_read(wm8994, WM8994_CHIP_REVISION);
if (ret < 0) {
dev_err(wm8994->dev, "Failed to read revision register: %d\n",
ret);
goto err_enable;
}
wm8994->revision = ret & WM8994_CHIP_REV_MASK;
wm8994->cust_id = (ret & WM8994_CUST_ID_MASK) >> WM8994_CUST_ID_SHIFT;
switch (wm8994->type) {
case WM8994:
switch (wm8994->revision) {
case 0:
case 1:
dev_warn(wm8994->dev,
"revision %c not fully supported\n",
'A' + wm8994->revision);
break;
case 2:
case 3:
default:
regmap_patch = wm8994_revc_patch;
patch_regs = ARRAY_SIZE(wm8994_revc_patch);
break;
}
break;
case WM8958:
switch (wm8994->revision) {
case 0:
regmap_patch = wm8958_reva_patch;
patch_regs = ARRAY_SIZE(wm8958_reva_patch);
break;
default:
break;
}
break;
case WM1811:
/* Revision C did not change the relevant layer */
if (wm8994->revision > 1)
wm8994->revision++;
regmap_patch = wm1811_reva_patch;
patch_regs = ARRAY_SIZE(wm1811_reva_patch);
break;
default:
break;
}
dev_info(wm8994->dev, "%s revision %c CUST_ID %02x\n", devname,
'A' + wm8994->revision, wm8994->cust_id);
switch (wm8994->type) {
case WM1811:
regmap_config = &wm1811_regmap_config;
break;
case WM8994:
regmap_config = &wm8994_regmap_config;
break;
case WM8958:
regmap_config = &wm8958_regmap_config;
break;
default:
dev_err(wm8994->dev, "Unknown device type %d\n", wm8994->type);
return -EINVAL;
}
ret = regmap_reinit_cache(wm8994->regmap, regmap_config);
if (ret != 0) {
dev_err(wm8994->dev, "Failed to reinit register cache: %d\n",
ret);
return ret;
}
/* Explicitly put the device into reset in case regulators
* don't get disabled in order to ensure we know the device
* state.
*/
ret = wm8994_reg_write(wm8994, WM8994_SOFTWARE_RESET,
wm8994_reg_read(wm8994, WM8994_SOFTWARE_RESET));
if (ret != 0) {
dev_err(wm8994->dev, "Failed to reset device: %d\n", ret);
return ret;
}
if (regmap_patch) {
ret = regmap_register_patch(wm8994->regmap, regmap_patch,
patch_regs);
if (ret != 0) {
dev_err(wm8994->dev, "Failed to register patch: %d\n",
ret);
goto err;
}
}
wm8994->irq_base = pdata->irq_base;
wm8994->gpio_base = pdata->gpio_base;
/* GPIO configuration is only applied if it's non-zero */
for (i = 0; i < ARRAY_SIZE(pdata->gpio_defaults); i++) {
if (pdata->gpio_defaults[i]) {
wm8994_set_bits(wm8994, WM8994_GPIO_1 + i,
0xffff, pdata->gpio_defaults[i]);
}
}
wm8994->ldo_ena_always_driven = pdata->ldo_ena_always_driven;
if (pdata->spkmode_pu)
pulls |= WM8994_SPKMODE_PU;
/* Disable unneeded pulls */
wm8994_set_bits(wm8994, WM8994_PULL_CONTROL_2,
WM8994_LDO1ENA_PD | WM8994_LDO2ENA_PD |
WM8994_SPKMODE_PU | WM8994_CSNADDR_PD,
pulls);
/* In some system designs where the regulators are not in use,
* we can achieve a small reduction in leakage currents by
* floating LDO outputs. This bit makes no difference if the
* LDOs are enabled, it only affects cases where the LDOs were
* in operation and are then disabled.
*/
for (i = 0; i < WM8994_NUM_LDO_REGS; i++) {
if (wm8994_ldo_in_use(pdata, i))
wm8994_set_bits(wm8994, WM8994_LDO_1 + i,
WM8994_LDO1_DISCH, WM8994_LDO1_DISCH);
else
wm8994_set_bits(wm8994, WM8994_LDO_1 + i,
WM8994_LDO1_DISCH, 0);
}
wm8994_irq_init(wm8994);
ret = mfd_add_devices(wm8994->dev, -1,
wm8994_devs, ARRAY_SIZE(wm8994_devs),
NULL, 0, NULL);
if (ret != 0) {
dev_err(wm8994->dev, "Failed to add children: %d\n", ret);
goto err_irq;
}
pm_runtime_enable(wm8994->dev);
pm_runtime_idle(wm8994->dev);
return 0;
err_irq:
wm8994_irq_exit(wm8994);
err_enable:
regulator_bulk_disable(wm8994->num_supplies,
wm8994->supplies);
err_regulator_free:
regulator_bulk_free(wm8994->num_supplies, wm8994->supplies);
err:
mfd_remove_devices(wm8994->dev);
return ret;
}
static void wm8994_device_exit(struct wm8994 *wm8994)
{
pm_runtime_disable(wm8994->dev);
wm8994_irq_exit(wm8994);
regulator_bulk_disable(wm8994->num_supplies, wm8994->supplies);
regulator_bulk_free(wm8994->num_supplies, wm8994->supplies);
mfd_remove_devices(wm8994->dev);
}
static const struct of_device_id wm8994_of_match[] = {
{ .compatible = "wlf,wm1811", .data = (void *)WM1811 },
{ .compatible = "wlf,wm8994", .data = (void *)WM8994 },
{ .compatible = "wlf,wm8958", .data = (void *)WM8958 },
{ }
};
MODULE_DEVICE_TABLE(of, wm8994_of_match);
static int wm8994_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
const struct of_device_id *of_id;
struct wm8994 *wm8994;
int ret;
wm8994 = devm_kzalloc(&i2c->dev, sizeof(struct wm8994), GFP_KERNEL);
if (wm8994 == NULL)
return -ENOMEM;
i2c_set_clientdata(i2c, wm8994);
wm8994->dev = &i2c->dev;
wm8994->irq = i2c->irq;
if (i2c->dev.of_node) {
of_id = of_match_device(wm8994_of_match, &i2c->dev);
if (of_id)
wm8994->type = (enum wm8994_type)of_id->data;
} else {
wm8994->type = id->driver_data;
}
wm8994->regmap = devm_regmap_init_i2c(i2c, &wm8994_base_regmap_config);
if (IS_ERR(wm8994->regmap)) {
ret = PTR_ERR(wm8994->regmap);
dev_err(wm8994->dev, "Failed to allocate register map: %d\n",
ret);
return ret;
}
return wm8994_device_init(wm8994, i2c->irq);
}
static int wm8994_i2c_remove(struct i2c_client *i2c)
{
struct wm8994 *wm8994 = i2c_get_clientdata(i2c);
wm8994_device_exit(wm8994);
return 0;
}
static const struct i2c_device_id wm8994_i2c_id[] = {
{ "wm1811", WM1811 },
{ "wm1811a", WM1811 },
{ "wm8994", WM8994 },
{ "wm8958", WM8958 },
{ }
};
MODULE_DEVICE_TABLE(i2c, wm8994_i2c_id);
static const struct dev_pm_ops wm8994_pm_ops = {
SET_RUNTIME_PM_OPS(wm8994_suspend, wm8994_resume, NULL)
};
static struct i2c_driver wm8994_i2c_driver = {
.driver = {
.name = "wm8994",
.pm = &wm8994_pm_ops,
.of_match_table = of_match_ptr(wm8994_of_match),
},
.probe = wm8994_i2c_probe,
.remove = wm8994_i2c_remove,
.id_table = wm8994_i2c_id,
};
module_i2c_driver(wm8994_i2c_driver);
MODULE_DESCRIPTION("Core support for the WM8994 audio CODEC");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
View Git Blame Copy Permalink