mirror of
https://github.com/edk2-porting/linux-next.git
synced 2025-01-01 18:24:23 +08:00
548cd3ab54
This patch adds code which enables Quad I/O mode on Micron SPI NOR flashes. For Micron SPI NOR flash, enabling or disabling quad I/O protocol can be done By two methods, which are to use EVCR (Enhanced Volatile Configuration Register) and the ENTER QUAD I/O MODE command. There is no difference between these two methods. Unfortunately, for some Micron SPI NOR flashes, there no ENTER Quad I/O command (35h), such as n25q064. But for all current Micron SPI NOR, if it support quad I/O mode, using EVCR definitely be supported. It is a recommended method to enable Quad I/O mode by EVCR, Quad I/O protocol bit 7. When EVCR bit 7 is reset to 0, the SPI NOR flash will operate in quad I/O mode. This patch has been tested on N25Q512A and MT25TL256BAA1ESF. Micron SPI NOR of spi_nor_ids[] table all support this method. Signed-off-by: Bean Huo <beanhuo@micron.com> Acked-by: Marek Vasut <marex@denx.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com> |
||
|---|---|---|
| .. | ||
| fsl-quadspi.c | ||
| Kconfig | ||
| Makefile | ||
| spi-nor.c | ||