mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-25 21:54:06 +08:00
63cab195bf
Cadence 1.0 version has bugs which have been fixed in the cadence 1.4 version. This patch removes the quirks present in the driver for cadence 1.4 version. Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com> [wsa: fixed indentation issues in r1p10_i2c_def] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
29 lines
928 B
Plaintext
29 lines
928 B
Plaintext
Binding for the Cadence I2C controller
|
|
|
|
Required properties:
|
|
- reg: Physical base address and size of the controller's register area.
|
|
- compatible: Should contain one of:
|
|
* "cdns,i2c-r1p10"
|
|
Note: Use this when cadence i2c controller version 1.0 is used.
|
|
* "cdns,i2c-r1p14"
|
|
Note: Use this when cadence i2c controller version 1.4 is used.
|
|
- clocks: Input clock specifier. Refer to common clock bindings.
|
|
- interrupts: Interrupt specifier. Refer to interrupt bindings.
|
|
- #address-cells: Should be 1.
|
|
- #size-cells: Should be 0.
|
|
|
|
Optional properties:
|
|
- clock-frequency: Desired operating frequency, in Hz, of the bus.
|
|
- clock-names: Input clock name, should be 'pclk'.
|
|
|
|
Example:
|
|
i2c@e0004000 {
|
|
compatible = "cdns,i2c-r1p10";
|
|
clocks = <&clkc 38>;
|
|
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0xe0004000 0x1000>;
|
|
clock-frequency = <400000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|