2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-25 21:54:06 +08:00
linux-next/drivers/pinctrl/pinctrl-equilibrium.h
Rahul Tanwar 1948d5c51d pinctrl: Add pinmux & GPIO controller driver for a new SoC
Intel Lightning Mountain SoC has a pinmux controller & GPIO controller IP which
controls pin multiplexing & configuration including GPIO functions selection &
GPIO attributes configuration.

This IP is not based on & does not have anything in common with Chassis
specification. The pinctrl drivers under pinctrl/intel/* are all based upon
Chassis spec compliant pinctrl IPs. So this driver doesn't fit & can not use
pinctrl framework under pinctrl/intel/* and it requires a separate new driver.

Add a new GPIO & pin control framework based driver for this IP.

Signed-off-by: Rahul Tanwar <rahul.tanwar@linux.intel.com>
Link: https://lore.kernel.org/r/33e649758b70490f01724a887c490d5008c7656d.1573797249.git.rahul.tanwar@linux.intel.com
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-21 14:47:44 +01:00

145 lines
4.5 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright(c) 2019 Intel Corporation.
*/
#ifndef __PINCTRL_EQUILIBRIUM_H
#define __PINCTRL_EQUILIBRIUM_H
/* PINPAD register offset */
#define REG_PMX_BASE 0x0 /* Port Multiplexer Control Register */
#define REG_PUEN 0x80 /* PULL UP Enable Register */
#define REG_PDEN 0x84 /* PULL DOWN Enable Register */
#define REG_SRC 0x88 /* Slew Rate Control Register */
#define REG_DCC0 0x8C /* Drive Current Control Register 0 */
#define REG_DCC1 0x90 /* Drive Current Control Register 1 */
#define REG_OD 0x94 /* Open Drain Enable Register */
#define REG_AVAIL 0x98 /* Pad Control Availability Register */
#define DRV_CUR_PINS 16 /* Drive Current pin number per register */
#define REG_DRCC(x) (REG_DCC0 + (x) * 4) /* Driver current macro */
/* GPIO register offset */
#define GPIO_OUT 0x0 /* Data Output Register */
#define GPIO_IN 0x4 /* Data Input Register */
#define GPIO_DIR 0x8 /* Direction Register */
#define GPIO_EXINTCR0 0x18 /* External Interrupt Control Register 0 */
#define GPIO_EXINTCR1 0x1C /* External Interrupt Control Register 1 */
#define GPIO_IRNCR 0x20 /* IRN Capture Register */
#define GPIO_IRNICR 0x24 /* IRN Interrupt Control Register */
#define GPIO_IRNEN 0x28 /* IRN Interrupt Enable Register */
#define GPIO_IRNCFG 0x2C /* IRN Interrupt Configuration Register */
#define GPIO_IRNRNSET 0x30 /* IRN Interrupt Enable Set Register */
#define GPIO_IRNENCLR 0x34 /* IRN Interrupt Enable Clear Register */
#define GPIO_OUTSET 0x40 /* Output Set Register */
#define GPIO_OUTCLR 0x44 /* Output Clear Register */
#define GPIO_DIRSET 0x48 /* Direction Set Register */
#define GPIO_DIRCLR 0x4C /* Direction Clear Register */
/* parse given pin's driver current value */
#define PARSE_DRV_CURRENT(val, pin) (((val) >> ((pin) * 2)) & 0x3)
#define GPIO_EDGE_TRIG 0
#define GPIO_LEVEL_TRIG 1
#define GPIO_SINGLE_EDGE 0
#define GPIO_BOTH_EDGE 1
#define GPIO_POSITIVE_TRIG 0
#define GPIO_NEGATIVE_TRIG 1
#define EQBR_GPIO_MODE 0
typedef enum {
OP_COUNT_NR_FUNCS,
OP_ADD_FUNCS,
OP_COUNT_NR_FUNC_GRPS,
OP_ADD_FUNC_GRPS,
OP_NONE,
} funcs_util_ops;
/**
* struct gpio_irq_type: gpio irq configuration
* @trig_type: level trigger or edge trigger
* @edge_type: sigle edge or both edge
* @logic_type: positive trigger or negative trigger
*/
struct gpio_irq_type {
unsigned int trig_type;
unsigned int edge_type;
unsigned int logic_type;
};
/**
* struct eqbr_pmx_func: represent a pin function.
* @name: name of the pin function, used to lookup the function.
* @groups: one or more names of pin groups that provide this function.
* @nr_groups: number of groups included in @groups.
*/
struct eqbr_pmx_func {
const char *name;
const char **groups;
unsigned int nr_groups;
};
/**
* struct eqbr_pin_bank: represent a pin bank.
* @membase: base address of the pin bank register.
* @id: bank id, to idenify the unique bank.
* @pin_base: starting pin number of the pin bank.
* @nr_pins: number of the pins of the pin bank.
* @aval_pinmap: available pin bitmap of the pin bank.
*/
struct eqbr_pin_bank {
void __iomem *membase;
unsigned int id;
unsigned int pin_base;
unsigned int nr_pins;
u32 aval_pinmap;
};
/**
* struct eqbr_gpio_ctrl: represent a gpio controller.
* @node: device node of gpio controller.
* @bank: pointer to corresponding pin bank.
* @membase: base address of the gpio controller.
* @chip: gpio chip.
* @ic: irq chip.
* @name: gpio chip name.
* @virq: irq number of the gpio chip to parent's irq domain.
* @lock: spin lock to protect gpio register write.
*/
struct eqbr_gpio_ctrl {
struct device_node *node;
struct eqbr_pin_bank *bank;
void __iomem *membase;
struct gpio_chip chip;
struct irq_chip ic;
const char *name;
unsigned int virq;
raw_spinlock_t lock; /* protect gpio register */
};
/**
* struct eqbr_pinctrl_drv_data:
* @dev: device instance representing the controller.
* @pctl_desc: pin controller descriptor.
* @pctl_dev: pin control class device
* @membase: base address of pin controller
* @pin_banks: list of pin banks of the driver.
* @nr_banks: number of pin banks.
* @gpio_ctrls: list of gpio controllers.
* @nr_gpio_ctrls: number of gpio controllers.
* @lock: protect pinctrl register write
*/
struct eqbr_pinctrl_drv_data {
struct device *dev;
struct pinctrl_desc pctl_desc;
struct pinctrl_dev *pctl_dev;
void __iomem *membase;
struct eqbr_pin_bank *pin_banks;
unsigned int nr_banks;
struct eqbr_gpio_ctrl *gpio_ctrls;
unsigned int nr_gpio_ctrls;
raw_spinlock_t lock; /* protect pinpad register */
};
#endif /* __PINCTRL_EQUILIBRIUM_H */