mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-23 12:43:55 +08:00
7b2d7faa09
Just a small set this time.
As we are very near the merge window, I've rolled a few fixes in here
rather than adding noise just before release. A short delay here will
do little harm.
New device support
* adis16480
- Add support for adis16490. After earlier rework this is simple ID plus
chip info.
Features
* kxcjk1013
- mount matrix support.
* lsm_6dsx
- mount matrix support.
Cleanups / minor or late breaking fixes
* ad7124
- add support to ad-sigma-delta and use it in this driver to allow
the the interrupt type to be IRQF_TRIGGER_LOW unlike most other devices
using this framework.
* adis
- use delay structure now available in SPI to handle transfer delays
- introduce a timeouts structure to allow support of new devices
* ak8975
- drop platform data support. No one is using it and it adds complexity.
- use device_get_match_data rather than open coding much the same thing.
* dht11
- drop meaningless todo
* at91-samad2_adc
- switch to dma_request_chan
* altas-sensor
- add a helper function to compute number of channels. Needed for new device
support that is under review.
* bma400
- add a lower bound check on scale.
* inv_mpu6050
- add support for temperature data in the fifos for all chips.
- support an odd situation where a board supports only interrupt triggering
on both edges.
* st_lsm6dsx
- check and handle potential error return.
* st_sensors
- fix some values for the LSM9DS0 which is ever so slightly different from
other devices using the same whoami value.
- switch over to generic functions from dt ones, avoiding need for separate
ACPI support.
* stm32-adc
- switch to dma_request_chan
- suppress an error print in deferred probe case.
* stm32-dac
- drop private data structure element for reset controller as only used in
probe.
- reflect more cleanly that the reset controller is optional whilst ensuring
that if is specified any errors are caught.
* stm32-dfsdm
- switch to dma_request_chan
- fix missing application of formatting to single conversions.
- ensure the sampling rate is updated when the oversampling ratio is changed.
-----BEGIN PGP SIGNATURE-----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=/q/r
-----END PGP SIGNATURE-----
Merge tag 'iio-for-5.6b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Second set of new device support, features and minor fixes for IIO in the 5.6 cycle
Just a small set this time.
As we are very near the merge window, I've rolled a few fixes in here
rather than adding noise just before release. A short delay here will
do little harm.
New device support
* adis16480
- Add support for adis16490. After earlier rework this is simple ID plus
chip info.
Features
* kxcjk1013
- mount matrix support.
* lsm_6dsx
- mount matrix support.
Cleanups / minor or late breaking fixes
* ad7124
- add support to ad-sigma-delta and use it in this driver to allow
the the interrupt type to be IRQF_TRIGGER_LOW unlike most other devices
using this framework.
* adis
- use delay structure now available in SPI to handle transfer delays
- introduce a timeouts structure to allow support of new devices
* ak8975
- drop platform data support. No one is using it and it adds complexity.
- use device_get_match_data rather than open coding much the same thing.
* dht11
- drop meaningless todo
* at91-samad2_adc
- switch to dma_request_chan
* altas-sensor
- add a helper function to compute number of channels. Needed for new device
support that is under review.
* bma400
- add a lower bound check on scale.
* inv_mpu6050
- add support for temperature data in the fifos for all chips.
- support an odd situation where a board supports only interrupt triggering
on both edges.
* st_lsm6dsx
- check and handle potential error return.
* st_sensors
- fix some values for the LSM9DS0 which is ever so slightly different from
other devices using the same whoami value.
- switch over to generic functions from dt ones, avoiding need for separate
ACPI support.
* stm32-adc
- switch to dma_request_chan
- suppress an error print in deferred probe case.
* stm32-dac
- drop private data structure element for reset controller as only used in
probe.
- reflect more cleanly that the reset controller is optional whilst ensuring
that if is specified any errors are caught.
* stm32-dfsdm
- switch to dma_request_chan
- fix missing application of formatting to single conversions.
- ensure the sampling rate is updated when the oversampling ratio is changed.
* tag 'iio-for-5.6b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (29 commits)
iio: dac: stm32-dac: better handle reset controller failures
iio: dac: stm32-dac: use reset controller only at probe time
dt-bindings: iio: accel: kxcjk1013: Document mount-matrix property
iio: accel: kxcjk1013: Support orientation matrix
iio: imu: st_lsm6dsx: add mount matrix support
iio: adc: stm32-adc: don't print an error on probe deferral
dt-bindings: iio: adis16480: add compatible entry for ADIS16490
iio: imu: adis16480: Add support for ADIS16490
iio: accel: bma400: prevent setting accel scale too low
iio: imu/mpu6050: support dual-edge IRQ
iio: imu: inv_mpu6050: add fifo temperature data support
iio: magnetometer: ak8975: Convert to use device_get_match_data()
iio: magnetometer: ak8975: Get rid of platform data
iio: adc: ad7124: Set IRQ type to falling
iio: adc: ad-sigma-delta: Allow custom IRQ flags
iio: imu: adis: use new `delay` structure for SPI transfer delays
iio: adc: stm32-dfsdm: adapt sampling rate to oversampling ratio
iio: adc: stm32-dfsdm: fix single conversion
iio: st_sensors: Make use of device properties
iio: st_sensors: Drop redundant parameter from st_sensors_of_name_probe()
...
|
||
|---|---|---|
| .. | ||
| android | ||
| axis-fifo | ||
| board | ||
| clocking-wizard | ||
| comedi | ||
| emxx_udc | ||
| exfat | ||
| fbtft | ||
| fieldbus | ||
| fsl-dpaa2 | ||
| fwserial | ||
| gasket | ||
| gdm724x | ||
| goldfish | ||
| greybus | ||
| gs_fpgaboot | ||
| hp | ||
| iio | ||
| kpc2000 | ||
| ks7010 | ||
| media | ||
| most | ||
| mt7621-dma | ||
| mt7621-dts | ||
| mt7621-pci | ||
| mt7621-pci-phy | ||
| mt7621-pinctrl | ||
| netlogic | ||
| nvec | ||
| olpc_dcon | ||
| pi433 | ||
| qlge | ||
| ralink-gdma | ||
| rtl8188eu | ||
| rtl8192e | ||
| rtl8192u | ||
| rtl8712 | ||
| rtl8723bs | ||
| rts5208 | ||
| sm750fb | ||
| speakup | ||
| unisys | ||
| uwb | ||
| vc04_services | ||
| vme | ||
| vt6655 | ||
| vt6656 | ||
| wfx | ||
| wilc1000 | ||
| wlan-ng | ||
| wusbcore | ||
| Kconfig | ||
| Makefile | ||