2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-28 07:04:00 +08:00
linux-next/Documentation/devicetree/bindings/rtc/rtc-palmas.txt
Laxman Dewangan 666a584d3a drivers/rtc/rtc-palmas.c: support for backup battery charging
Palmas series device like TPS65913, TPS80036 supports the backup battery
for powering the RTC when no other energy source is available.

The backup battery is optional, connected to the VBACKUP pin, and can be
nonrechargeable or rechargeable.  The rechargeable battery can be charged
from the system supply using the backup battery charger.

Add support for enabling charging of this backup battery.  Also add the DT
binding document and the new properties to have this support.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Acked-by: Kumar Gala <galak@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:58:55 -07:00

34 lines
1.1 KiB
Plaintext

Palmas RTC controller bindings
Required properties:
- compatible:
- "ti,palmas-rtc" for palma series of the RTC controller
- interrupt-parent: Parent interrupt device, must be handle of palmas node.
- interrupts: Interrupt number of RTC submodule on device.
Optional properties:
- ti,backup-battery-chargeable: The Palmas series device like TPS65913 or
TPS80036 supports the backup battery for powering the RTC when main
battery is removed or in very low power state. The backup battery
can be chargeable or non-chargeable. This flag will tells whether
battery is chargeable or not. If charging battery then driver can
enable the charging.
- ti,backup-battery-charge-high-current: Enable high current charging in
backup battery. Device supports the < 100mA and > 100mA charging.
The high current will be > 100mA. Absence of this property will
charge battery to lower current i.e. < 100mA.
Example:
palmas: tps65913@58 {
...
palmas_rtc: rtc {
compatible = "ti,palmas-rtc";
interrupt-parent = <&palmas>;
interrupts = <8 0>;
ti,backup-battery-chargeable;
ti,backup-battery-charge-high-current;
};
...
};