mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-21 03:33:59 +08:00
686f871b71
This function needs to be exported to let clients be able to request the ape opp 100 voltage. Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
799 lines
22 KiB
C
799 lines
22 KiB
C
/*
|
|
* Copyright (C) STMicroelectronics 2009
|
|
* Copyright (C) ST-Ericsson SA 2010
|
|
*
|
|
* License Terms: GNU General Public License v2
|
|
* Author: Kumar Sanghvi <kumar.sanghvi@stericsson.com>
|
|
*
|
|
* PRCMU f/w APIs
|
|
*/
|
|
#ifndef __MFD_DB8500_PRCMU_H
|
|
#define __MFD_DB8500_PRCMU_H
|
|
|
|
#include <linux/interrupt.h>
|
|
#include <linux/bitops.h>
|
|
|
|
/*
|
|
* Registers
|
|
*/
|
|
#define DB8500_PRCM_GPIOCR 0x138
|
|
#define DB8500_PRCM_GPIOCR_DBG_UARTMOD_CMD0 BIT(0)
|
|
#define DB8500_PRCM_GPIOCR_DBG_STM_APE_CMD BIT(9)
|
|
#define DB8500_PRCM_GPIOCR_DBG_STM_MOD_CMD1 BIT(11)
|
|
#define DB8500_PRCM_GPIOCR_SPI2_SELECT BIT(23)
|
|
|
|
#define DB8500_PRCM_LINE_VALUE 0x170
|
|
#define DB8500_PRCM_LINE_VALUE_HSI_CAWAKE0 BIT(3)
|
|
|
|
#define DB8500_PRCM_DSI_SW_RESET 0x324
|
|
#define DB8500_PRCM_DSI_SW_RESET_DSI0_SW_RESETN BIT(0)
|
|
#define DB8500_PRCM_DSI_SW_RESET_DSI1_SW_RESETN BIT(1)
|
|
#define DB8500_PRCM_DSI_SW_RESET_DSI2_SW_RESETN BIT(2)
|
|
|
|
/* This portion previously known as <mach/prcmu-fw-defs_v1.h> */
|
|
|
|
/**
|
|
* enum state - ON/OFF state definition
|
|
* @OFF: State is ON
|
|
* @ON: State is OFF
|
|
*
|
|
*/
|
|
enum state {
|
|
OFF = 0x0,
|
|
ON = 0x1,
|
|
};
|
|
|
|
/**
|
|
* enum ret_state - general purpose On/Off/Retention states
|
|
*
|
|
*/
|
|
enum ret_state {
|
|
OFFST = 0,
|
|
ONST = 1,
|
|
RETST = 2
|
|
};
|
|
|
|
/**
|
|
* enum clk_arm - ARM Cortex A9 clock schemes
|
|
* @A9_OFF:
|
|
* @A9_BOOT:
|
|
* @A9_OPPT1:
|
|
* @A9_OPPT2:
|
|
* @A9_EXTCLK:
|
|
*/
|
|
enum clk_arm {
|
|
A9_OFF,
|
|
A9_BOOT,
|
|
A9_OPPT1,
|
|
A9_OPPT2,
|
|
A9_EXTCLK
|
|
};
|
|
|
|
/**
|
|
* enum clk_gen - GEN#0/GEN#1 clock schemes
|
|
* @GEN_OFF:
|
|
* @GEN_BOOT:
|
|
* @GEN_OPPT1:
|
|
*/
|
|
enum clk_gen {
|
|
GEN_OFF,
|
|
GEN_BOOT,
|
|
GEN_OPPT1,
|
|
};
|
|
|
|
/* some information between arm and xp70 */
|
|
|
|
/**
|
|
* enum romcode_write - Romcode message written by A9 AND read by XP70
|
|
* @RDY_2_DS: Value set when ApDeepSleep state can be executed by XP70
|
|
* @RDY_2_XP70_RST: Value set when 0x0F has been successfully polled by the
|
|
* romcode. The xp70 will go into self-reset
|
|
*/
|
|
enum romcode_write {
|
|
RDY_2_DS = 0x09,
|
|
RDY_2_XP70_RST = 0x10
|
|
};
|
|
|
|
/**
|
|
* enum romcode_read - Romcode message written by XP70 and read by A9
|
|
* @INIT: Init value when romcode field is not used
|
|
* @FS_2_DS: Value set when power state is going from ApExecute to
|
|
* ApDeepSleep
|
|
* @END_DS: Value set when ApDeepSleep power state is reached coming from
|
|
* ApExecute state
|
|
* @DS_TO_FS: Value set when power state is going from ApDeepSleep to
|
|
* ApExecute
|
|
* @END_FS: Value set when ApExecute power state is reached coming from
|
|
* ApDeepSleep state
|
|
* @SWR: Value set when power state is going to ApReset
|
|
* @END_SWR: Value set when the xp70 finished executing ApReset actions and
|
|
* waits for romcode acknowledgment to go to self-reset
|
|
*/
|
|
enum romcode_read {
|
|
INIT = 0x00,
|
|
FS_2_DS = 0x0A,
|
|
END_DS = 0x0B,
|
|
DS_TO_FS = 0x0C,
|
|
END_FS = 0x0D,
|
|
SWR = 0x0E,
|
|
END_SWR = 0x0F
|
|
};
|
|
|
|
/**
|
|
* enum ap_pwrst - current power states defined in PRCMU firmware
|
|
* @NO_PWRST: Current power state init
|
|
* @AP_BOOT: Current power state is apBoot
|
|
* @AP_EXECUTE: Current power state is apExecute
|
|
* @AP_DEEP_SLEEP: Current power state is apDeepSleep
|
|
* @AP_SLEEP: Current power state is apSleep
|
|
* @AP_IDLE: Current power state is apIdle
|
|
* @AP_RESET: Current power state is apReset
|
|
*/
|
|
enum ap_pwrst {
|
|
NO_PWRST = 0x00,
|
|
AP_BOOT = 0x01,
|
|
AP_EXECUTE = 0x02,
|
|
AP_DEEP_SLEEP = 0x03,
|
|
AP_SLEEP = 0x04,
|
|
AP_IDLE = 0x05,
|
|
AP_RESET = 0x06
|
|
};
|
|
|
|
/**
|
|
* enum ap_pwrst_trans - Transition states defined in PRCMU firmware
|
|
* @NO_TRANSITION: No power state transition
|
|
* @APEXECUTE_TO_APSLEEP: Power state transition from ApExecute to ApSleep
|
|
* @APIDLE_TO_APSLEEP: Power state transition from ApIdle to ApSleep
|
|
* @APBOOT_TO_APEXECUTE: Power state transition from ApBoot to ApExecute
|
|
* @APEXECUTE_TO_APDEEPSLEEP: Power state transition from ApExecute to
|
|
* ApDeepSleep
|
|
* @APEXECUTE_TO_APIDLE: Power state transition from ApExecute to ApIdle
|
|
*/
|
|
enum ap_pwrst_trans {
|
|
PRCMU_AP_NO_CHANGE = 0x00,
|
|
APEXECUTE_TO_APSLEEP = 0x01,
|
|
APIDLE_TO_APSLEEP = 0x02, /* To be removed */
|
|
PRCMU_AP_SLEEP = 0x01,
|
|
APBOOT_TO_APEXECUTE = 0x03,
|
|
APEXECUTE_TO_APDEEPSLEEP = 0x04, /* To be removed */
|
|
PRCMU_AP_DEEP_SLEEP = 0x04,
|
|
APEXECUTE_TO_APIDLE = 0x05, /* To be removed */
|
|
PRCMU_AP_IDLE = 0x05,
|
|
PRCMU_AP_DEEP_IDLE = 0x07,
|
|
};
|
|
|
|
/**
|
|
* enum hw_acc_state - State definition for hardware accelerator
|
|
* @HW_NO_CHANGE: The hardware accelerator state must remain unchanged
|
|
* @HW_OFF: The hardware accelerator must be switched off
|
|
* @HW_OFF_RAMRET: The hardware accelerator must be switched off with its
|
|
* internal RAM in retention
|
|
* @HW_ON: The hwa hardware accelerator hwa must be switched on
|
|
*
|
|
* NOTE! Deprecated, to be removed when all users switched over to use the
|
|
* regulator API.
|
|
*/
|
|
enum hw_acc_state {
|
|
HW_NO_CHANGE = 0x00,
|
|
HW_OFF = 0x01,
|
|
HW_OFF_RAMRET = 0x02,
|
|
HW_ON = 0x04
|
|
};
|
|
|
|
/**
|
|
* enum mbox_2_arm_stat - Status messages definition for mbox_arm
|
|
* @BOOT_TO_EXECUTEOK: The apBoot to apExecute state transition has been
|
|
* completed
|
|
* @DEEPSLEEPOK: The apExecute to apDeepSleep state transition has been
|
|
* completed
|
|
* @SLEEPOK: The apExecute to apSleep state transition has been completed
|
|
* @IDLEOK: The apExecute to apIdle state transition has been completed
|
|
* @SOFTRESETOK: The A9 watchdog/ SoftReset state has been completed
|
|
* @SOFTRESETGO : The A9 watchdog/SoftReset state is on going
|
|
* @BOOT_TO_EXECUTE: The apBoot to apExecute state transition is on going
|
|
* @EXECUTE_TO_DEEPSLEEP: The apExecute to apDeepSleep state transition is on
|
|
* going
|
|
* @DEEPSLEEP_TO_EXECUTE: The apDeepSleep to apExecute state transition is on
|
|
* going
|
|
* @DEEPSLEEP_TO_EXECUTEOK: The apDeepSleep to apExecute state transition has
|
|
* been completed
|
|
* @EXECUTE_TO_SLEEP: The apExecute to apSleep state transition is on going
|
|
* @SLEEP_TO_EXECUTE: The apSleep to apExecute state transition is on going
|
|
* @SLEEP_TO_EXECUTEOK: The apSleep to apExecute state transition has been
|
|
* completed
|
|
* @EXECUTE_TO_IDLE: The apExecute to apIdle state transition is on going
|
|
* @IDLE_TO_EXECUTE: The apIdle to apExecute state transition is on going
|
|
* @IDLE_TO_EXECUTEOK: The apIdle to apExecute state transition has been
|
|
* completed
|
|
* @INIT_STATUS: Status init
|
|
*/
|
|
enum ap_pwrsttr_status {
|
|
BOOT_TO_EXECUTEOK = 0xFF,
|
|
DEEPSLEEPOK = 0xFE,
|
|
SLEEPOK = 0xFD,
|
|
IDLEOK = 0xFC,
|
|
SOFTRESETOK = 0xFB,
|
|
SOFTRESETGO = 0xFA,
|
|
BOOT_TO_EXECUTE = 0xF9,
|
|
EXECUTE_TO_DEEPSLEEP = 0xF8,
|
|
DEEPSLEEP_TO_EXECUTE = 0xF7,
|
|
DEEPSLEEP_TO_EXECUTEOK = 0xF6,
|
|
EXECUTE_TO_SLEEP = 0xF5,
|
|
SLEEP_TO_EXECUTE = 0xF4,
|
|
SLEEP_TO_EXECUTEOK = 0xF3,
|
|
EXECUTE_TO_IDLE = 0xF2,
|
|
IDLE_TO_EXECUTE = 0xF1,
|
|
IDLE_TO_EXECUTEOK = 0xF0,
|
|
RDYTODS_RETURNTOEXE = 0xEF,
|
|
NORDYTODS_RETURNTOEXE = 0xEE,
|
|
EXETOSLEEP_RETURNTOEXE = 0xED,
|
|
EXETOIDLE_RETURNTOEXE = 0xEC,
|
|
INIT_STATUS = 0xEB,
|
|
|
|
/*error messages */
|
|
INITERROR = 0x00,
|
|
PLLARMLOCKP_ER = 0x01,
|
|
PLLDDRLOCKP_ER = 0x02,
|
|
PLLSOCLOCKP_ER = 0x03,
|
|
PLLSOCK1LOCKP_ER = 0x04,
|
|
ARMWFI_ER = 0x05,
|
|
SYSCLKOK_ER = 0x06,
|
|
I2C_NACK_DATA_ER = 0x07,
|
|
BOOT_ER = 0x08,
|
|
I2C_STATUS_ALWAYS_1 = 0x0A,
|
|
I2C_NACK_REG_ADDR_ER = 0x0B,
|
|
I2C_NACK_DATA0123_ER = 0x1B,
|
|
I2C_NACK_ADDR_ER = 0x1F,
|
|
CURAPPWRSTISNOT_BOOT = 0x20,
|
|
CURAPPWRSTISNOT_EXECUTE = 0x21,
|
|
CURAPPWRSTISNOT_SLEEPMODE = 0x22,
|
|
CURAPPWRSTISNOT_CORRECTFORIT10 = 0x23,
|
|
FIFO4500WUISNOT_WUPEVENT = 0x24,
|
|
PLL32KLOCKP_ER = 0x29,
|
|
DDRDEEPSLEEPOK_ER = 0x2A,
|
|
ROMCODEREADY_ER = 0x50,
|
|
WUPBEFOREDS = 0x51,
|
|
DDRCONFIG_ER = 0x52,
|
|
WUPBEFORESLEEP = 0x53,
|
|
WUPBEFOREIDLE = 0x54
|
|
}; /* earlier called as mbox_2_arm_stat */
|
|
|
|
/**
|
|
* enum dvfs_stat - DVFS status messages definition
|
|
* @DVFS_GO: A state transition DVFS is on going
|
|
* @DVFS_ARM100OPPOK: The state transition DVFS has been completed for 100OPP
|
|
* @DVFS_ARM50OPPOK: The state transition DVFS has been completed for 50OPP
|
|
* @DVFS_ARMEXTCLKOK: The state transition DVFS has been completed for EXTCLK
|
|
* @DVFS_NOCHGTCLKOK: The state transition DVFS has been completed for
|
|
* NOCHGCLK
|
|
* @DVFS_INITSTATUS: Value init
|
|
*/
|
|
enum dvfs_stat {
|
|
DVFS_GO = 0xFF,
|
|
DVFS_ARM100OPPOK = 0xFE,
|
|
DVFS_ARM50OPPOK = 0xFD,
|
|
DVFS_ARMEXTCLKOK = 0xFC,
|
|
DVFS_NOCHGTCLKOK = 0xFB,
|
|
DVFS_INITSTATUS = 0x00
|
|
};
|
|
|
|
/**
|
|
* enum sva_mmdsp_stat - SVA MMDSP status messages
|
|
* @SVA_MMDSP_GO: SVAMMDSP interrupt has happened
|
|
* @SVA_MMDSP_INIT: Status init
|
|
*/
|
|
enum sva_mmdsp_stat {
|
|
SVA_MMDSP_GO = 0xFF,
|
|
SVA_MMDSP_INIT = 0x00
|
|
};
|
|
|
|
/**
|
|
* enum sia_mmdsp_stat - SIA MMDSP status messages
|
|
* @SIA_MMDSP_GO: SIAMMDSP interrupt has happened
|
|
* @SIA_MMDSP_INIT: Status init
|
|
*/
|
|
enum sia_mmdsp_stat {
|
|
SIA_MMDSP_GO = 0xFF,
|
|
SIA_MMDSP_INIT = 0x00
|
|
};
|
|
|
|
/**
|
|
* enum mbox_to_arm_err - Error messages definition
|
|
* @INIT_ERR: Init value
|
|
* @PLLARMLOCKP_ERR: PLLARM has not been correctly locked in given time
|
|
* @PLLDDRLOCKP_ERR: PLLDDR has not been correctly locked in the given time
|
|
* @PLLSOC0LOCKP_ERR: PLLSOC0 has not been correctly locked in the given time
|
|
* @PLLSOC1LOCKP_ERR: PLLSOC1 has not been correctly locked in the given time
|
|
* @ARMWFI_ERR: The ARM WFI has not been correctly executed in the given time
|
|
* @SYSCLKOK_ERR: The SYSCLK is not available in the given time
|
|
* @BOOT_ERR: Romcode has not validated the XP70 self reset in the given time
|
|
* @ROMCODESAVECONTEXT: The Romcode didn.t correctly save it secure context
|
|
* @VARMHIGHSPEEDVALTO_ERR: The ARM high speed supply value transfered
|
|
* through I2C has not been correctly executed in the given time
|
|
* @VARMHIGHSPEEDACCESS_ERR: The command value of VarmHighSpeedVal transfered
|
|
* through I2C has not been correctly executed in the given time
|
|
* @VARMLOWSPEEDVALTO_ERR:The ARM low speed supply value transfered through
|
|
* I2C has not been correctly executed in the given time
|
|
* @VARMLOWSPEEDACCESS_ERR: The command value of VarmLowSpeedVal transfered
|
|
* through I2C has not been correctly executed in the given time
|
|
* @VARMRETENTIONVALTO_ERR: The ARM retention supply value transfered through
|
|
* I2C has not been correctly executed in the given time
|
|
* @VARMRETENTIONACCESS_ERR: The command value of VarmRetentionVal transfered
|
|
* through I2C has not been correctly executed in the given time
|
|
* @VAPEHIGHSPEEDVALTO_ERR: The APE highspeed supply value transfered through
|
|
* I2C has not been correctly executed in the given time
|
|
* @VSAFEHPVALTO_ERR: The SAFE high power supply value transfered through I2C
|
|
* has not been correctly executed in the given time
|
|
* @VMODSEL1VALTO_ERR: The MODEM sel1 supply value transfered through I2C has
|
|
* not been correctly executed in the given time
|
|
* @VMODSEL2VALTO_ERR: The MODEM sel2 supply value transfered through I2C has
|
|
* not been correctly executed in the given time
|
|
* @VARMOFFACCESS_ERR: The command value of Varm ON/OFF transfered through
|
|
* I2C has not been correctly executed in the given time
|
|
* @VAPEOFFACCESS_ERR: The command value of Vape ON/OFF transfered through
|
|
* I2C has not been correctly executed in the given time
|
|
* @VARMRETACCES_ERR: The command value of Varm retention ON/OFF transfered
|
|
* through I2C has not been correctly executed in the given time
|
|
* @CURAPPWRSTISNOTBOOT:Generated when Arm want to do power state transition
|
|
* ApBoot to ApExecute but the power current state is not Apboot
|
|
* @CURAPPWRSTISNOTEXECUTE: Generated when Arm want to do power state
|
|
* transition from ApExecute to others power state but the
|
|
* power current state is not ApExecute
|
|
* @CURAPPWRSTISNOTSLEEPMODE: Generated when wake up events are transmitted
|
|
* but the power current state is not ApDeepSleep/ApSleep/ApIdle
|
|
* @CURAPPWRSTISNOTCORRECTDBG: Generated when wake up events are transmitted
|
|
* but the power current state is not correct
|
|
* @ARMREGU1VALTO_ERR:The ArmRegu1 value transferred through I2C has not
|
|
* been correctly executed in the given time
|
|
* @ARMREGU2VALTO_ERR: The ArmRegu2 value transferred through I2C has not
|
|
* been correctly executed in the given time
|
|
* @VAPEREGUVALTO_ERR: The VApeRegu value transfered through I2C has not
|
|
* been correctly executed in the given time
|
|
* @VSMPS3REGUVALTO_ERR: The VSmps3Regu value transfered through I2C has not
|
|
* been correctly executed in the given time
|
|
* @VMODREGUVALTO_ERR: The VModemRegu value transfered through I2C has not
|
|
* been correctly executed in the given time
|
|
*/
|
|
enum mbox_to_arm_err {
|
|
INIT_ERR = 0x00,
|
|
PLLARMLOCKP_ERR = 0x01,
|
|
PLLDDRLOCKP_ERR = 0x02,
|
|
PLLSOC0LOCKP_ERR = 0x03,
|
|
PLLSOC1LOCKP_ERR = 0x04,
|
|
ARMWFI_ERR = 0x05,
|
|
SYSCLKOK_ERR = 0x06,
|
|
BOOT_ERR = 0x07,
|
|
ROMCODESAVECONTEXT = 0x08,
|
|
VARMHIGHSPEEDVALTO_ERR = 0x10,
|
|
VARMHIGHSPEEDACCESS_ERR = 0x11,
|
|
VARMLOWSPEEDVALTO_ERR = 0x12,
|
|
VARMLOWSPEEDACCESS_ERR = 0x13,
|
|
VARMRETENTIONVALTO_ERR = 0x14,
|
|
VARMRETENTIONACCESS_ERR = 0x15,
|
|
VAPEHIGHSPEEDVALTO_ERR = 0x16,
|
|
VSAFEHPVALTO_ERR = 0x17,
|
|
VMODSEL1VALTO_ERR = 0x18,
|
|
VMODSEL2VALTO_ERR = 0x19,
|
|
VARMOFFACCESS_ERR = 0x1A,
|
|
VAPEOFFACCESS_ERR = 0x1B,
|
|
VARMRETACCES_ERR = 0x1C,
|
|
CURAPPWRSTISNOTBOOT = 0x20,
|
|
CURAPPWRSTISNOTEXECUTE = 0x21,
|
|
CURAPPWRSTISNOTSLEEPMODE = 0x22,
|
|
CURAPPWRSTISNOTCORRECTDBG = 0x23,
|
|
ARMREGU1VALTO_ERR = 0x24,
|
|
ARMREGU2VALTO_ERR = 0x25,
|
|
VAPEREGUVALTO_ERR = 0x26,
|
|
VSMPS3REGUVALTO_ERR = 0x27,
|
|
VMODREGUVALTO_ERR = 0x28
|
|
};
|
|
|
|
enum hw_acc {
|
|
SVAMMDSP = 0,
|
|
SVAPIPE = 1,
|
|
SIAMMDSP = 2,
|
|
SIAPIPE = 3,
|
|
SGA = 4,
|
|
B2R2MCDE = 5,
|
|
ESRAM12 = 6,
|
|
ESRAM34 = 7,
|
|
};
|
|
|
|
enum cs_pwrmgt {
|
|
PWRDNCS0 = 0,
|
|
WKUPCS0 = 1,
|
|
PWRDNCS1 = 2,
|
|
WKUPCS1 = 3
|
|
};
|
|
|
|
/* Defs related to autonomous power management */
|
|
|
|
/**
|
|
* enum sia_sva_pwr_policy - Power policy
|
|
* @NO_CHGT: No change
|
|
* @DSPOFF_HWPOFF:
|
|
* @DSPOFFRAMRET_HWPOFF:
|
|
* @DSPCLKOFF_HWPOFF:
|
|
* @DSPCLKOFF_HWPCLKOFF:
|
|
*
|
|
*/
|
|
enum sia_sva_pwr_policy {
|
|
NO_CHGT = 0x0,
|
|
DSPOFF_HWPOFF = 0x1,
|
|
DSPOFFRAMRET_HWPOFF = 0x2,
|
|
DSPCLKOFF_HWPOFF = 0x3,
|
|
DSPCLKOFF_HWPCLKOFF = 0x4,
|
|
};
|
|
|
|
/**
|
|
* enum auto_enable - Auto Power enable
|
|
* @AUTO_OFF:
|
|
* @AUTO_ON:
|
|
*
|
|
*/
|
|
enum auto_enable {
|
|
AUTO_OFF = 0x0,
|
|
AUTO_ON = 0x1,
|
|
};
|
|
|
|
/* End of file previously known as prcmu-fw-defs_v1.h */
|
|
|
|
/**
|
|
* enum prcmu_power_status - results from set_power_state
|
|
* @PRCMU_SLEEP_OK: Sleep went ok
|
|
* @PRCMU_DEEP_SLEEP_OK: DeepSleep went ok
|
|
* @PRCMU_IDLE_OK: Idle went ok
|
|
* @PRCMU_DEEPIDLE_OK: DeepIdle went ok
|
|
* @PRCMU_PRCMU2ARMPENDINGIT_ER: Pending interrupt detected
|
|
* @PRCMU_ARMPENDINGIT_ER: Pending interrupt detected
|
|
*
|
|
*/
|
|
enum prcmu_power_status {
|
|
PRCMU_SLEEP_OK = 0xf3,
|
|
PRCMU_DEEP_SLEEP_OK = 0xf6,
|
|
PRCMU_IDLE_OK = 0xf0,
|
|
PRCMU_DEEPIDLE_OK = 0xe3,
|
|
PRCMU_PRCMU2ARMPENDINGIT_ER = 0x91,
|
|
PRCMU_ARMPENDINGIT_ER = 0x93,
|
|
};
|
|
|
|
/*
|
|
* Definitions for autonomous power management configuration.
|
|
*/
|
|
|
|
#define PRCMU_AUTO_PM_OFF 0
|
|
#define PRCMU_AUTO_PM_ON 1
|
|
|
|
#define PRCMU_AUTO_PM_POWER_ON_HSEM BIT(0)
|
|
#define PRCMU_AUTO_PM_POWER_ON_ABB_FIFO_IT BIT(1)
|
|
|
|
enum prcmu_auto_pm_policy {
|
|
PRCMU_AUTO_PM_POLICY_NO_CHANGE,
|
|
PRCMU_AUTO_PM_POLICY_DSP_OFF_HWP_OFF,
|
|
PRCMU_AUTO_PM_POLICY_DSP_OFF_RAMRET_HWP_OFF,
|
|
PRCMU_AUTO_PM_POLICY_DSP_CLK_OFF_HWP_OFF,
|
|
PRCMU_AUTO_PM_POLICY_DSP_CLK_OFF_HWP_CLK_OFF,
|
|
};
|
|
|
|
/**
|
|
* struct prcmu_auto_pm_config - Autonomous power management configuration.
|
|
* @sia_auto_pm_enable: SIA autonomous pm enable. (PRCMU_AUTO_PM_{OFF,ON})
|
|
* @sia_power_on: SIA power ON enable. (PRCMU_AUTO_PM_POWER_ON_* bitmask)
|
|
* @sia_policy: SIA power policy. (enum prcmu_auto_pm_policy)
|
|
* @sva_auto_pm_enable: SVA autonomous pm enable. (PRCMU_AUTO_PM_{OFF,ON})
|
|
* @sva_power_on: SVA power ON enable. (PRCMU_AUTO_PM_POWER_ON_* bitmask)
|
|
* @sva_policy: SVA power policy. (enum prcmu_auto_pm_policy)
|
|
*/
|
|
struct prcmu_auto_pm_config {
|
|
u8 sia_auto_pm_enable;
|
|
u8 sia_power_on;
|
|
u8 sia_policy;
|
|
u8 sva_auto_pm_enable;
|
|
u8 sva_power_on;
|
|
u8 sva_policy;
|
|
};
|
|
|
|
#define PRCMU_FW_PROJECT_U8500 2
|
|
#define PRCMU_FW_PROJECT_U9500 4
|
|
#define PRCMU_FW_PROJECT_U8500_C2 7
|
|
#define PRCMU_FW_PROJECT_U9500_C2 11
|
|
#define PRCMU_FW_PROJECT_U8520 13
|
|
#define PRCMU_FW_PROJECT_U8420 14
|
|
|
|
struct prcmu_fw_version {
|
|
u8 project;
|
|
u8 api_version;
|
|
u8 func_version;
|
|
u8 errata;
|
|
};
|
|
|
|
#ifdef CONFIG_MFD_DB8500_PRCMU
|
|
|
|
void db8500_prcmu_early_init(void);
|
|
int prcmu_set_rc_a2p(enum romcode_write);
|
|
enum romcode_read prcmu_get_rc_p2a(void);
|
|
enum ap_pwrst prcmu_get_xp70_current_state(void);
|
|
bool prcmu_has_arm_maxopp(void);
|
|
struct prcmu_fw_version *prcmu_get_fw_version(void);
|
|
int prcmu_release_usb_wakeup_state(void);
|
|
void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep,
|
|
struct prcmu_auto_pm_config *idle);
|
|
bool prcmu_is_auto_pm_enabled(void);
|
|
|
|
int prcmu_config_clkout(u8 clkout, u8 source, u8 div);
|
|
int prcmu_set_clock_divider(u8 clock, u8 divider);
|
|
int db8500_prcmu_config_hotdog(u8 threshold);
|
|
int db8500_prcmu_config_hotmon(u8 low, u8 high);
|
|
int db8500_prcmu_start_temp_sense(u16 cycles32k);
|
|
int db8500_prcmu_stop_temp_sense(void);
|
|
int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
|
|
int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
|
|
|
|
int prcmu_ac_wake_req(void);
|
|
void prcmu_ac_sleep_req(void);
|
|
void db8500_prcmu_modem_reset(void);
|
|
|
|
int db8500_prcmu_config_a9wdog(u8 num, bool sleep_auto_off);
|
|
int db8500_prcmu_enable_a9wdog(u8 id);
|
|
int db8500_prcmu_disable_a9wdog(u8 id);
|
|
int db8500_prcmu_kick_a9wdog(u8 id);
|
|
int db8500_prcmu_load_a9wdog(u8 id, u32 val);
|
|
|
|
void db8500_prcmu_system_reset(u16 reset_code);
|
|
int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll);
|
|
u8 db8500_prcmu_get_power_state_result(void);
|
|
int db8500_prcmu_gic_decouple(void);
|
|
int db8500_prcmu_gic_recouple(void);
|
|
int db8500_prcmu_copy_gic_settings(void);
|
|
bool db8500_prcmu_gic_pending_irq(void);
|
|
bool db8500_prcmu_pending_irq(void);
|
|
bool db8500_prcmu_is_cpu_in_wfi(int cpu);
|
|
void db8500_prcmu_enable_wakeups(u32 wakeups);
|
|
int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state);
|
|
int db8500_prcmu_request_clock(u8 clock, bool enable);
|
|
int db8500_prcmu_set_display_clocks(void);
|
|
int db8500_prcmu_disable_dsipll(void);
|
|
int db8500_prcmu_enable_dsipll(void);
|
|
void db8500_prcmu_config_abb_event_readout(u32 abb_events);
|
|
void db8500_prcmu_get_abb_event_buffer(void __iomem **buf);
|
|
int db8500_prcmu_config_esram0_deep_sleep(u8 state);
|
|
u16 db8500_prcmu_get_reset_code(void);
|
|
bool db8500_prcmu_is_ac_wake_requested(void);
|
|
int db8500_prcmu_set_arm_opp(u8 opp);
|
|
int db8500_prcmu_get_arm_opp(void);
|
|
int db8500_prcmu_set_ape_opp(u8 opp);
|
|
int db8500_prcmu_get_ape_opp(void);
|
|
int db8500_prcmu_request_ape_opp_100_voltage(bool enable);
|
|
int db8500_prcmu_set_ddr_opp(u8 opp);
|
|
int db8500_prcmu_get_ddr_opp(void);
|
|
|
|
u32 db8500_prcmu_read(unsigned int reg);
|
|
void db8500_prcmu_write(unsigned int reg, u32 value);
|
|
void db8500_prcmu_write_masked(unsigned int reg, u32 mask, u32 value);
|
|
|
|
#else /* !CONFIG_MFD_DB8500_PRCMU */
|
|
|
|
static inline void db8500_prcmu_early_init(void) {}
|
|
|
|
static inline int prcmu_set_rc_a2p(enum romcode_write code)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline enum romcode_read prcmu_get_rc_p2a(void)
|
|
{
|
|
return INIT;
|
|
}
|
|
|
|
static inline enum ap_pwrst prcmu_get_xp70_current_state(void)
|
|
{
|
|
return AP_EXECUTE;
|
|
}
|
|
|
|
static inline bool prcmu_has_arm_maxopp(void)
|
|
{
|
|
return false;
|
|
}
|
|
|
|
static inline struct prcmu_fw_version *prcmu_get_fw_version(void)
|
|
{
|
|
return NULL;
|
|
}
|
|
|
|
static inline int db8500_prcmu_set_ape_opp(u8 opp)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int db8500_prcmu_get_ape_opp(void)
|
|
{
|
|
return APE_100_OPP;
|
|
}
|
|
|
|
static inline int db8500_prcmu_request_ape_opp_100_voltage(bool enable)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int prcmu_release_usb_wakeup_state(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int db8500_prcmu_set_ddr_opp(u8 opp)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int db8500_prcmu_get_ddr_opp(void)
|
|
{
|
|
return DDR_100_OPP;
|
|
}
|
|
|
|
static inline void prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep,
|
|
struct prcmu_auto_pm_config *idle)
|
|
{
|
|
}
|
|
|
|
static inline bool prcmu_is_auto_pm_enabled(void)
|
|
{
|
|
return false;
|
|
}
|
|
|
|
static inline int prcmu_config_clkout(u8 clkout, u8 source, u8 div)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int prcmu_set_clock_divider(u8 clock, u8 divider)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int db8500_prcmu_config_hotdog(u8 threshold)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int db8500_prcmu_config_hotmon(u8 low, u8 high)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int db8500_prcmu_start_temp_sense(u16 cycles32k)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int db8500_prcmu_stop_temp_sense(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
|
|
{
|
|
return -ENOSYS;
|
|
}
|
|
|
|
static inline int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
|
|
{
|
|
return -ENOSYS;
|
|
}
|
|
|
|
static inline int prcmu_ac_wake_req(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline void prcmu_ac_sleep_req(void) {}
|
|
|
|
static inline void db8500_prcmu_modem_reset(void) {}
|
|
|
|
static inline void db8500_prcmu_system_reset(u16 reset_code) {}
|
|
|
|
static inline int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk,
|
|
bool keep_ap_pll)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline u8 db8500_prcmu_get_power_state_result(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline void db8500_prcmu_enable_wakeups(u32 wakeups) {}
|
|
|
|
static inline int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int db8500_prcmu_request_clock(u8 clock, bool enable)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int db8500_prcmu_set_display_clocks(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int db8500_prcmu_disable_dsipll(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int db8500_prcmu_enable_dsipll(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int db8500_prcmu_config_esram0_deep_sleep(u8 state)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline void db8500_prcmu_config_abb_event_readout(u32 abb_events) {}
|
|
|
|
static inline void db8500_prcmu_get_abb_event_buffer(void __iomem **buf) {}
|
|
|
|
static inline u16 db8500_prcmu_get_reset_code(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int db8500_prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int db8500_prcmu_enable_a9wdog(u8 id)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int db8500_prcmu_disable_a9wdog(u8 id)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int db8500_prcmu_kick_a9wdog(u8 id)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int db8500_prcmu_load_a9wdog(u8 id, u32 val)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline bool db8500_prcmu_is_ac_wake_requested(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int db8500_prcmu_set_arm_opp(u8 opp)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int db8500_prcmu_get_arm_opp(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline u32 db8500_prcmu_read(unsigned int reg)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline void db8500_prcmu_write(unsigned int reg, u32 value) {}
|
|
|
|
static inline void db8500_prcmu_write_masked(unsigned int reg, u32 mask,
|
|
u32 value) {}
|
|
|
|
#endif /* !CONFIG_MFD_DB8500_PRCMU */
|
|
|
|
#endif /* __MFD_DB8500_PRCMU_H */
|