2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-25 05:34:00 +08:00
linux-next/Documentation/devicetree/bindings/clock/imx23-clock.txt
Fabio Estevam 7425057294 clk: imx: Remove 'clock-output-names' from the examples
'clock-output-names' is not used in any of the dts/dtsi files for i.mx.

Remove it from the examples, so that the example and the real usage in the
dtsi files can match.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
2013-01-04 13:16:00 +08:00

72 lines
1.1 KiB
Plaintext

* Clock bindings for Freescale i.MX23
Required properties:
- compatible: Should be "fsl,imx23-clkctrl"
- reg: Address and length of the register set
- #clock-cells: Should be <1>
The clock consumer should specify the desired clock by having the clock
ID in its "clocks" phandle cell. The following is a full list of i.MX23
clocks and IDs.
Clock ID
------------------
ref_xtal 0
pll 1
ref_cpu 2
ref_emi 3
ref_pix 4
ref_io 5
saif_sel 6
lcdif_sel 7
gpmi_sel 8
ssp_sel 9
emi_sel 10
cpu 11
etm_sel 12
cpu_pll 13
cpu_xtal 14
hbus 15
xbus 16
lcdif_div 17
ssp_div 18
gpmi_div 19
emi_pll 20
emi_xtal 21
etm_div 22
saif_div 23
clk32k_div 24
rtc 25
adc 26
spdif_div 27
clk32k 28
dri 29
pwm 30
filt 31
uart 32
ssp 33
gpmi 34
spdif 35
emi 36
saif 37
lcdif 38
etm 39
usb 40
usb_phy 41
Examples:
clks: clkctrl@80040000 {
compatible = "fsl,imx23-clkctrl";
reg = <0x80040000 0x2000>;
#clock-cells = <1>;
};
auart0: serial@8006c000 {
compatible = "fsl,imx23-auart";
reg = <0x8006c000 0x2000>;
interrupts = <24 25 23>;
clocks = <&clks 32>;
status = "disabled";
};