renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 20:53:53 +08:00
Code
7a4a3770dd
linux-next/drivers/media/video/saa7111.c
Tim Schmielau cd354f1ae7 [PATCH] remove many unneeded #includes of sched.h 
After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there.  Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.

To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.

Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm.  I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:54 -08:00

613 lines
14 KiB
C
Raw Blame History

/*
* saa7111 - Philips SAA7111A video decoder driver version 0.0.3
*
* Copyright (C) 1998 Dave Perks <dperks@ibm.net>
*
* Slight changes for video timing and attachment output by
* Wolfgang Scherr <scherr@net4you.net>
*
* Changes by Ronald Bultje <rbultje@ronald.bitfreak.net>
* - moved over to linux>=2.4.x i2c protocol (1/1/2003)
*
* Changes by Michael Hunold <michael@mihu.de>
* - implemented DECODER_SET_GPIO, DECODER_INIT, DECODER_SET_VBI_BYPASS
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/errno.h>
#include <linux/fs.h>
#include <linux/kernel.h>
#include <linux/major.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/pci.h>
#include <linux/signal.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <linux/types.h>
#include <linux/videodev.h>
#include <asm/uaccess.h>
MODULE_DESCRIPTION("Philips SAA7111 video decoder driver");
MODULE_AUTHOR("Dave Perks");
MODULE_LICENSE("GPL");
#include <linux/i2c.h>
#define I2C_NAME(s) (s)->name
#include <linux/video_decoder.h>
static int debug = 0;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Debug level (0-1)");
#define dprintk(num, format, args...) \
do { \
if (debug >= num) \
printk(format, ##args); \
} while (0)
/* ----------------------------------------------------------------------- */
#define SAA7111_NR_REG 0x18
struct saa7111 {
unsigned char reg[SAA7111_NR_REG];
int norm;
int input;
int enable;
int bright;
int contrast;
int hue;
int sat;
};
#define I2C_SAA7111 0x48
/* ----------------------------------------------------------------------- */
static inline int
saa7111_write (struct i2c_client *client,
u8 reg,
u8 value)
{
struct saa7111 *decoder = i2c_get_clientdata(client);
decoder->reg[reg] = value;
return i2c_smbus_write_byte_data(client, reg, value);
}
static int
saa7111_write_block (struct i2c_client *client,
const u8 *data,
unsigned int len)
{
int ret = -1;
u8 reg;
/* the saa7111 has an autoincrement function, use it if
* the adapter understands raw I2C */
if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
/* do raw I2C, not smbus compatible */
struct saa7111 *decoder = i2c_get_clientdata(client);
u8 block_data[32];
int block_len;
while (len >= 2) {
block_len = 0;
block_data[block_len++] = reg = data[0];
do {
block_data[block_len++] =
decoder->reg[reg++] = data[1];
len -= 2;
data += 2;
} while (len >= 2 && data[0] == reg &&
block_len < 32);
if ((ret = i2c_master_send(client, block_data,
block_len)) < 0)
break;
}
} else {
/* do some slow I2C emulation kind of thing */
while (len >= 2) {
reg = *data++;
if ((ret = saa7111_write(client, reg,
*data++)) < 0)
break;
len -= 2;
}
}
return ret;
}
static int
saa7111_init_decoder (struct i2c_client *client,
struct video_decoder_init *init)
{
return saa7111_write_block(client, init->data, init->len);
}
static inline int
saa7111_read (struct i2c_client *client,
u8 reg)
{
return i2c_smbus_read_byte_data(client, reg);
}
/* ----------------------------------------------------------------------- */
static const unsigned char saa7111_i2c_init[] = {
0x00, 0x00, /* 00 - ID byte */
0x01, 0x00, /* 01 - reserved */
/*front end */
0x02, 0xd0, /* 02 - FUSE=3, GUDL=2, MODE=0 */
0x03, 0x23, /* 03 - HLNRS=0, VBSL=1, WPOFF=0,
* HOLDG=0, GAFIX=0, GAI1=256, GAI2=256 */
0x04, 0x00, /* 04 - GAI1=256 */
0x05, 0x00, /* 05 - GAI2=256 */
/* decoder */
0x06, 0xf3, /* 06 - HSB at 13(50Hz) / 17(60Hz)
* pixels after end of last line */
/*0x07, 0x13, * 07 - HSS at 113(50Hz) / 117(60Hz) pixels
* after end of last line */
0x07, 0xe8, /* 07 - HSS seems to be needed to
* work with NTSC, too */
0x08, 0xc8, /* 08 - AUFD=1, FSEL=1, EXFIL=0,
* VTRC=1, HPLL=0, VNOI=0 */
0x09, 0x01, /* 09 - BYPS=0, PREF=0, BPSS=0,
* VBLB=0, UPTCV=0, APER=1 */
0x0a, 0x80, /* 0a - BRIG=128 */
0x0b, 0x47, /* 0b - CONT=1.109 */
0x0c, 0x40, /* 0c - SATN=1.0 */
0x0d, 0x00, /* 0d - HUE=0 */
0x0e, 0x01, /* 0e - CDTO=0, CSTD=0, DCCF=0,
* FCTC=0, CHBW=1 */
0x0f, 0x00, /* 0f - reserved */
0x10, 0x48, /* 10 - OFTS=1, HDEL=0, VRLN=1, YDEL=0 */
0x11, 0x1c, /* 11 - GPSW=0, CM99=0, FECO=0, COMPO=1,
* OEYC=1, OEHV=1, VIPB=0, COLO=0 */
0x12, 0x00, /* 12 - output control 2 */
0x13, 0x00, /* 13 - output control 3 */
0x14, 0x00, /* 14 - reserved */
0x15, 0x00, /* 15 - VBI */
0x16, 0x00, /* 16 - VBI */
0x17, 0x00, /* 17 - VBI */
};
static int
saa7111_command (struct i2c_client *client,
unsigned int cmd,
void *arg)
{
struct saa7111 *decoder = i2c_get_clientdata(client);
switch (cmd) {
case 0:
break;
case DECODER_INIT:
{
struct video_decoder_init *init = arg;
if (NULL != init)
return saa7111_init_decoder(client, init);
else {
struct video_decoder_init vdi;
vdi.data = saa7111_i2c_init;
vdi.len = sizeof(saa7111_i2c_init);
return saa7111_init_decoder(client, &vdi);
}
}
case DECODER_DUMP:
{
int i;
for (i = 0; i < SAA7111_NR_REG; i += 16) {
int j;
printk(KERN_DEBUG "%s: %03x", I2C_NAME(client), i);
for (j = 0; j < 16 && i + j < SAA7111_NR_REG; ++j) {
printk(" %02x",
saa7111_read(client, i + j));
}
printk("\n");
}
}
break;
case DECODER_GET_CAPABILITIES:
{
struct video_decoder_capability *cap = arg;
cap->flags = VIDEO_DECODER_PAL |
VIDEO_DECODER_NTSC |
VIDEO_DECODER_SECAM |
VIDEO_DECODER_AUTO |
VIDEO_DECODER_CCIR;
cap->inputs = 8;
cap->outputs = 1;
}
break;
case DECODER_GET_STATUS:
{
int *iarg = arg;
int status;
int res;
status = saa7111_read(client, 0x1f);
dprintk(1, KERN_DEBUG "%s status: 0x%02x\n", I2C_NAME(client),
status);
res = 0;
if ((status & (1 << 6)) == 0) {
res |= DECODER_STATUS_GOOD;
}
switch (decoder->norm) {
case VIDEO_MODE_NTSC:
res |= DECODER_STATUS_NTSC;
break;
case VIDEO_MODE_PAL:
res |= DECODER_STATUS_PAL;
break;
case VIDEO_MODE_SECAM:
res |= DECODER_STATUS_SECAM;
break;
default:
case VIDEO_MODE_AUTO:
if ((status & (1 << 5)) != 0) {
res |= DECODER_STATUS_NTSC;
} else {
res |= DECODER_STATUS_PAL;
}
break;
}
if ((status & (1 << 0)) != 0) {
res |= DECODER_STATUS_COLOR;
}
*iarg = res;
}
break;
case DECODER_SET_GPIO:
{
int *iarg = arg;
if (0 != *iarg) {
saa7111_write(client, 0x11,
(decoder->reg[0x11] | 0x80));
} else {
saa7111_write(client, 0x11,
(decoder->reg[0x11] & 0x7f));
}
break;
}
case DECODER_SET_VBI_BYPASS:
{
int *iarg = arg;
if (0 != *iarg) {
saa7111_write(client, 0x13,
(decoder->reg[0x13] & 0xf0) | 0x0a);
} else {
saa7111_write(client, 0x13,
(decoder->reg[0x13] & 0xf0));
}
break;
}
case DECODER_SET_NORM:
{
int *iarg = arg;
switch (*iarg) {
case VIDEO_MODE_NTSC:
saa7111_write(client, 0x08,
(decoder->reg[0x08] & 0x3f) | 0x40);
saa7111_write(client, 0x0e,
(decoder->reg[0x0e] & 0x8f));
break;
case VIDEO_MODE_PAL:
saa7111_write(client, 0x08,
(decoder->reg[0x08] & 0x3f) | 0x00);
saa7111_write(client, 0x0e,
(decoder->reg[0x0e] & 0x8f));
break;
case VIDEO_MODE_SECAM:
saa7111_write(client, 0x08,
(decoder->reg[0x08] & 0x3f) | 0x00);
saa7111_write(client, 0x0e,
(decoder->reg[0x0e] & 0x8f) | 0x50);
break;
case VIDEO_MODE_AUTO:
saa7111_write(client, 0x08,
(decoder->reg[0x08] & 0x3f) | 0x80);
saa7111_write(client, 0x0e,
(decoder->reg[0x0e] & 0x8f));
break;
default:
return -EINVAL;
}
decoder->norm = *iarg;
}
break;
case DECODER_SET_INPUT:
{
int *iarg = arg;
if (*iarg < 0 || *iarg > 7) {
return -EINVAL;
}
if (decoder->input != *iarg) {
decoder->input = *iarg;
/* select mode */
saa7111_write(client, 0x02,
(decoder->
reg[0x02] & 0xf8) | decoder->input);
/* bypass chrominance trap for modes 4..7 */
saa7111_write(client, 0x09,
(decoder->
reg[0x09] & 0x7f) | ((decoder->
input >
3) ? 0x80 :
0));
}
}
break;
case DECODER_SET_OUTPUT:
{
int *iarg = arg;
/* not much choice of outputs */
if (*iarg != 0) {
return -EINVAL;
}
}
break;
case DECODER_ENABLE_OUTPUT:
{
int *iarg = arg;
int enable = (*iarg != 0);
if (decoder->enable != enable) {
decoder->enable = enable;
/* RJ: If output should be disabled (for
* playing videos), we also need a open PLL.
* The input is set to 0 (where no input
* source is connected), although this
* is not necessary.
*
* If output should be enabled, we have to
* reverse the above.
*/
if (decoder->enable) {
saa7111_write(client, 0x02,
(decoder->
reg[0x02] & 0xf8) |
decoder->input);
saa7111_write(client, 0x08,
(decoder->reg[0x08] & 0xfb));
saa7111_write(client, 0x11,
(decoder->
reg[0x11] & 0xf3) | 0x0c);
} else {
saa7111_write(client, 0x02,
(decoder->reg[0x02] & 0xf8));
saa7111_write(client, 0x08,
(decoder->
reg[0x08] & 0xfb) | 0x04);
saa7111_write(client, 0x11,
(decoder->reg[0x11] & 0xf3));
}
}
}
break;
case DECODER_SET_PICTURE:
{
struct video_picture *pic = arg;
if (decoder->bright != pic->brightness) {
/* We want 0 to 255 we get 0-65535 */
decoder->bright = pic->brightness;
saa7111_write(client, 0x0a, decoder->bright >> 8);
}
if (decoder->contrast != pic->contrast) {
/* We want 0 to 127 we get 0-65535 */
decoder->contrast = pic->contrast;
saa7111_write(client, 0x0b,
decoder->contrast >> 9);
}
if (decoder->sat != pic->colour) {
/* We want 0 to 127 we get 0-65535 */
decoder->sat = pic->colour;
saa7111_write(client, 0x0c, decoder->sat >> 9);
}
if (decoder->hue != pic->hue) {
/* We want -128 to 127 we get 0-65535 */
decoder->hue = pic->hue;
saa7111_write(client, 0x0d,
(decoder->hue - 32768) >> 8);
}
}
break;
default:
return -EINVAL;
}
return 0;
}
/* ----------------------------------------------------------------------- */
/*
* Generic i2c probe
* concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1'
*/
static unsigned short normal_i2c[] = { I2C_SAA7111 >> 1, I2C_CLIENT_END };
static unsigned short ignore = I2C_CLIENT_END;
static struct i2c_client_address_data addr_data = {
.normal_i2c = normal_i2c,
.probe = &ignore,
.ignore = &ignore,
};
static struct i2c_driver i2c_driver_saa7111;
static int
saa7111_detect_client (struct i2c_adapter *adapter,
int address,
int kind)
{
int i;
struct i2c_client *client;
struct saa7111 *decoder;
struct video_decoder_init vdi;
dprintk(1,
KERN_INFO
"saa7111.c: detecting saa7111 client on address 0x%x\n",
address << 1);
/* Check if the adapter supports the needed features */
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return 0;
client = kzalloc(sizeof(struct i2c_client), GFP_KERNEL);
if (client == 0)
return -ENOMEM;
client->addr = address;
client->adapter = adapter;
client->driver = &i2c_driver_saa7111;
strlcpy(I2C_NAME(client), "saa7111", sizeof(I2C_NAME(client)));
decoder = kzalloc(sizeof(struct saa7111), GFP_KERNEL);
if (decoder == NULL) {
kfree(client);
return -ENOMEM;
}
decoder->norm = VIDEO_MODE_NTSC;
decoder->input = 0;
decoder->enable = 1;
decoder->bright = 32768;
decoder->contrast = 32768;
decoder->hue = 32768;
decoder->sat = 32768;
i2c_set_clientdata(client, decoder);
i = i2c_attach_client(client);
if (i) {
kfree(client);
kfree(decoder);
return i;
}
vdi.data = saa7111_i2c_init;
vdi.len = sizeof(saa7111_i2c_init);
i = saa7111_init_decoder(client, &vdi);
if (i < 0) {
dprintk(1, KERN_ERR "%s_attach error: init status %d\n",
I2C_NAME(client), i);
} else {
dprintk(1,
KERN_INFO
"%s_attach: chip version %x at address 0x%x\n",
I2C_NAME(client), saa7111_read(client, 0x00) >> 4,
client->addr << 1);
}
return 0;
}
static int
saa7111_attach_adapter (struct i2c_adapter *adapter)
{
dprintk(1,
KERN_INFO
"saa7111.c: starting probe for adapter %s (0x%x)\n",
I2C_NAME(adapter), adapter->id);
return i2c_probe(adapter, &addr_data, &saa7111_detect_client);
}
static int
saa7111_detach_client (struct i2c_client *client)
{
struct saa7111 *decoder = i2c_get_clientdata(client);
int err;
err = i2c_detach_client(client);
if (err) {
return err;
}
kfree(decoder);
kfree(client);
return 0;
}
/* ----------------------------------------------------------------------- */
static struct i2c_driver i2c_driver_saa7111 = {
.driver = {
.name = "saa7111",
},
.id = I2C_DRIVERID_SAA7111A,
.attach_adapter = saa7111_attach_adapter,
.detach_client = saa7111_detach_client,
.command = saa7111_command,
};
static int __init
saa7111_init (void)
{
return i2c_add_driver(&i2c_driver_saa7111);
}
static void __exit
saa7111_exit (void)
{
i2c_del_driver(&i2c_driver_saa7111);
}
module_init(saa7111_init);
module_exit(saa7111_exit);
View Git Blame Copy Permalink