renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 11:44:01 +08:00
Code
793c51d5fd
linux-next/drivers/hwmon/w83795.c
Jean Delvare 793c51d5fd hwmon: (w83795) Clear intrusion alarm immediately 
When asked to clear the intrusion alarm, do so immediately. We have to
invalidate the cache to make sure the new status will be read. But we
also have to read from the status register once to clear the pending
alarm, as writing to CLR_CHS surprising won't clear it automatically.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
2010-11-15 21:38:57 +01:00

2219 lines
61 KiB
C
Raw Blame History

/*
* w83795.c - Linux kernel driver for hardware monitoring
* Copyright (C) 2008 Nuvoton Technology Corp.
* Wei Song
* Copyright (C) 2010 Jean Delvare <khali@linux-fr.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation - version 2.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301 USA.
*
* Supports following chips:
*
* Chip #vin #fanin #pwm #temp #dts wchipid vendid i2c ISA
* w83795g 21 14 8 6 8 0x79 0x5ca3 yes no
* w83795adg 18 14 2 6 8 0x79 0x5ca3 yes no
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/delay.h>
/* Addresses to scan */
static const unsigned short normal_i2c[] = {
0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END
};
static int reset;
module_param(reset, bool, 0);
MODULE_PARM_DESC(reset, "Set to 1 to reset chip, not recommended");
#define W83795_REG_BANKSEL 0x00
#define W83795_REG_VENDORID 0xfd
#define W83795_REG_CHIPID 0xfe
#define W83795_REG_DEVICEID 0xfb
#define W83795_REG_DEVICEID_A 0xff
#define W83795_REG_I2C_ADDR 0xfc
#define W83795_REG_CONFIG 0x01
#define W83795_REG_CONFIG_CONFIG48 0x04
#define W83795_REG_CONFIG_START 0x01
/* Multi-Function Pin Ctrl Registers */
#define W83795_REG_VOLT_CTRL1 0x02
#define W83795_REG_VOLT_CTRL2 0x03
#define W83795_REG_TEMP_CTRL1 0x04
#define W83795_REG_TEMP_CTRL2 0x05
#define W83795_REG_FANIN_CTRL1 0x06
#define W83795_REG_FANIN_CTRL2 0x07
#define W83795_REG_VMIGB_CTRL 0x08
#define TEMP_READ 0
#define TEMP_CRIT 1
#define TEMP_CRIT_HYST 2
#define TEMP_WARN 3
#define TEMP_WARN_HYST 4
/* only crit and crit_hyst affect real-time alarm status
* current crit crit_hyst warn warn_hyst */
static const u16 W83795_REG_TEMP[][5] = {
{0x21, 0x96, 0x97, 0x98, 0x99}, /* TD1/TR1 */
{0x22, 0x9a, 0x9b, 0x9c, 0x9d}, /* TD2/TR2 */
{0x23, 0x9e, 0x9f, 0xa0, 0xa1}, /* TD3/TR3 */
{0x24, 0xa2, 0xa3, 0xa4, 0xa5}, /* TD4/TR4 */
{0x1f, 0xa6, 0xa7, 0xa8, 0xa9}, /* TR5 */
{0x20, 0xaa, 0xab, 0xac, 0xad}, /* TR6 */
};
#define IN_READ 0
#define IN_MAX 1
#define IN_LOW 2
static const u16 W83795_REG_IN[][3] = {
/* Current, HL, LL */
{0x10, 0x70, 0x71}, /* VSEN1 */
{0x11, 0x72, 0x73}, /* VSEN2 */
{0x12, 0x74, 0x75}, /* VSEN3 */
{0x13, 0x76, 0x77}, /* VSEN4 */
{0x14, 0x78, 0x79}, /* VSEN5 */
{0x15, 0x7a, 0x7b}, /* VSEN6 */
{0x16, 0x7c, 0x7d}, /* VSEN7 */
{0x17, 0x7e, 0x7f}, /* VSEN8 */
{0x18, 0x80, 0x81}, /* VSEN9 */
{0x19, 0x82, 0x83}, /* VSEN10 */
{0x1A, 0x84, 0x85}, /* VSEN11 */
{0x1B, 0x86, 0x87}, /* VTT */
{0x1C, 0x88, 0x89}, /* 3VDD */
{0x1D, 0x8a, 0x8b}, /* 3VSB */
{0x1E, 0x8c, 0x8d}, /* VBAT */
{0x1F, 0xa6, 0xa7}, /* VSEN12 */
{0x20, 0xaa, 0xab}, /* VSEN13 */
{0x21, 0x96, 0x97}, /* VSEN14 */
{0x22, 0x9a, 0x9b}, /* VSEN15 */
{0x23, 0x9e, 0x9f}, /* VSEN16 */
{0x24, 0xa2, 0xa3}, /* VSEN17 */
};
#define W83795_REG_VRLSB 0x3C
static const u8 W83795_REG_IN_HL_LSB[] = {
0x8e, /* VSEN1-4 */
0x90, /* VSEN5-8 */
0x92, /* VSEN9-11 */
0x94, /* VTT, 3VDD, 3VSB, 3VBAT */
0xa8, /* VSEN12 */
0xac, /* VSEN13 */
0x98, /* VSEN14 */
0x9c, /* VSEN15 */
0xa0, /* VSEN16 */
0xa4, /* VSEN17 */
};
#define IN_LSB_REG(index, type) \
(((type) == 1) ? W83795_REG_IN_HL_LSB[(index)] \
: (W83795_REG_IN_HL_LSB[(index)] + 1))
#define IN_LSB_SHIFT 0
#define IN_LSB_IDX 1
static const u8 IN_LSB_SHIFT_IDX[][2] = {
/* High/Low LSB shift, LSB No. */
{0x00, 0x00}, /* VSEN1 */
{0x02, 0x00}, /* VSEN2 */
{0x04, 0x00}, /* VSEN3 */
{0x06, 0x00}, /* VSEN4 */
{0x00, 0x01}, /* VSEN5 */
{0x02, 0x01}, /* VSEN6 */
{0x04, 0x01}, /* VSEN7 */
{0x06, 0x01}, /* VSEN8 */
{0x00, 0x02}, /* VSEN9 */
{0x02, 0x02}, /* VSEN10 */
{0x04, 0x02}, /* VSEN11 */
{0x00, 0x03}, /* VTT */
{0x02, 0x03}, /* 3VDD */
{0x04, 0x03}, /* 3VSB */
{0x06, 0x03}, /* VBAT */
{0x06, 0x04}, /* VSEN12 */
{0x06, 0x05}, /* VSEN13 */
{0x06, 0x06}, /* VSEN14 */
{0x06, 0x07}, /* VSEN15 */
{0x06, 0x08}, /* VSEN16 */
{0x06, 0x09}, /* VSEN17 */
};
#define W83795_REG_FAN(index) (0x2E + (index))
#define W83795_REG_FAN_MIN_HL(index) (0xB6 + (index))
#define W83795_REG_FAN_MIN_LSB(index) (0xC4 + (index) / 2)
#define W83795_REG_FAN_MIN_LSB_SHIFT(index) \
(((index) & 1) ? 4 : 0)
#define W83795_REG_VID_CTRL 0x6A
#define W83795_REG_ALARM_CTRL 0x40
#define ALARM_CTRL_RTSACS (1 << 7)
#define W83795_REG_ALARM(index) (0x41 + (index))
#define W83795_REG_CLR_CHASSIS 0x4D
#define W83795_REG_BEEP(index) (0x50 + (index))
#define W83795_REG_FCMS1 0x201
#define W83795_REG_FCMS2 0x208
#define W83795_REG_TFMR(index) (0x202 + (index))
#define W83795_REG_FOMC 0x20F
#define W83795_REG_TSS(index) (0x209 + (index))
#define TSS_MAP_RESERVED 0xff
static const u8 tss_map[4][6] = {
{ 0, 1, 2, 3, 4, 5},
{ 6, 7, 8, 9, 0, 1},
{10, 11, 12, 13, 2, 3},
{ 4, 5, 4, 5, TSS_MAP_RESERVED, TSS_MAP_RESERVED},
};
#define PWM_OUTPUT 0
#define PWM_FREQ 1
#define PWM_START 2
#define PWM_NONSTOP 3
#define PWM_STOP_TIME 4
#define W83795_REG_PWM(index, nr) (0x210 + (nr) * 8 + (index))
#define W83795_REG_FTSH(index) (0x240 + (index) * 2)
#define W83795_REG_FTSL(index) (0x241 + (index) * 2)
#define W83795_REG_TFTS 0x250
#define TEMP_PWM_TTTI 0
#define TEMP_PWM_CTFS 1
#define TEMP_PWM_HCT 2
#define TEMP_PWM_HOT 3
#define W83795_REG_TTTI(index) (0x260 + (index))
#define W83795_REG_CTFS(index) (0x268 + (index))
#define W83795_REG_HT(index) (0x270 + (index))
#define SF4_TEMP 0
#define SF4_PWM 1
#define W83795_REG_SF4_TEMP(temp_num, index) \
(0x280 + 0x10 * (temp_num) + (index))
#define W83795_REG_SF4_PWM(temp_num, index) \
(0x288 + 0x10 * (temp_num) + (index))
#define W83795_REG_DTSC 0x301
#define W83795_REG_DTSE 0x302
#define W83795_REG_DTS(index) (0x26 + (index))
#define W83795_REG_PECI_TBASE(index) (0x320 + (index))
#define DTS_CRIT 0
#define DTS_CRIT_HYST 1
#define DTS_WARN 2
#define DTS_WARN_HYST 3
#define W83795_REG_DTS_EXT(index) (0xB2 + (index))
#define SETUP_PWM_DEFAULT 0
#define SETUP_PWM_UPTIME 1
#define SETUP_PWM_DOWNTIME 2
#define W83795_REG_SETUP_PWM(index) (0x20C + (index))
static inline u16 in_from_reg(u8 index, u16 val)
{
/* 3VDD, 3VSB and VBAT: 6 mV/bit; other inputs: 2 mV/bit */
if (index >= 12 && index <= 14)
return val * 6;
else
return val * 2;
}
static inline u16 in_to_reg(u8 index, u16 val)
{
if (index >= 12 && index <= 14)
return val / 6;
else
return val / 2;
}
static inline unsigned long fan_from_reg(u16 val)
{
if ((val == 0xfff) || (val == 0))
return 0;
return 1350000UL / val;
}
static inline u16 fan_to_reg(long rpm)
{
if (rpm <= 0)
return 0x0fff;
return SENSORS_LIMIT((1350000 + (rpm >> 1)) / rpm, 1, 0xffe);
}
static inline unsigned long time_from_reg(u8 reg)
{
return reg * 100;
}
static inline u8 time_to_reg(unsigned long val)
{
return SENSORS_LIMIT((val + 50) / 100, 0, 0xff);
}
static inline long temp_from_reg(s8 reg)
{
return reg * 1000;
}
static inline s8 temp_to_reg(long val, s8 min, s8 max)
{
return SENSORS_LIMIT(val / 1000, min, max);
}
static const u16 pwm_freq_cksel0[16] = {
1024, 512, 341, 256, 205, 171, 146, 128,
85, 64, 32, 16, 8, 4, 2, 1
};
static unsigned int pwm_freq_from_reg(u8 reg, u16 clkin)
{
unsigned long base_clock;
if (reg & 0x80) {
base_clock = clkin * 1000 / ((clkin == 48000) ? 384 : 256);
return base_clock / ((reg & 0x7f) + 1);
} else
return pwm_freq_cksel0[reg & 0x0f];
}
static u8 pwm_freq_to_reg(unsigned long val, u16 clkin)
{
unsigned long base_clock;
u8 reg0, reg1;
unsigned long best0, best1;
/* Best fit for cksel = 0 */
for (reg0 = 0; reg0 < ARRAY_SIZE(pwm_freq_cksel0) - 1; reg0++) {
if (val > (pwm_freq_cksel0[reg0] +
pwm_freq_cksel0[reg0 + 1]) / 2)
break;
}
if (val < 375) /* cksel = 1 can't beat this */
return reg0;
best0 = pwm_freq_cksel0[reg0];
/* Best fit for cksel = 1 */
base_clock = clkin * 1000 / ((clkin == 48000) ? 384 : 256);
reg1 = SENSORS_LIMIT(DIV_ROUND_CLOSEST(base_clock, val), 1, 128);
best1 = base_clock / reg1;
reg1 = 0x80 | (reg1 - 1);
/* Choose the closest one */
if (abs(val - best0) > abs(val - best1))
return reg1;
else
return reg0;
}
enum chip_types {w83795g, w83795adg};
struct w83795_data {
struct device *hwmon_dev;
struct mutex update_lock;
unsigned long last_updated; /* In jiffies */
enum chip_types chip_type;
u8 bank;
u32 has_in; /* Enable monitor VIN or not */
u8 has_dyn_in; /* Only in2-0 can have this */
u16 in[21][3]; /* Register value, read/high/low */
u8 in_lsb[10][3]; /* LSB Register value, high/low */
u8 has_gain; /* has gain: in17-20 * 8 */
u16 has_fan; /* Enable fan14-1 or not */
u16 fan[14]; /* Register value combine */
u16 fan_min[14]; /* Register value combine */
u8 has_temp; /* Enable monitor temp6-1 or not */
s8 temp[6][5]; /* current, crit, crit_hyst, warn, warn_hyst */
u8 temp_read_vrlsb[6];
u8 temp_mode; /* Bit vector, 0 = TR, 1 = TD */
u8 temp_src[3]; /* Register value */
u8 enable_dts; /* Enable PECI and SB-TSI,
* bit 0: =1 enable, =0 disable,
* bit 1: =1 AMD SB-TSI, =0 Intel PECI */
u8 has_dts; /* Enable monitor DTS temp */
s8 dts[8]; /* Register value */
u8 dts_read_vrlsb[8]; /* Register value */
s8 dts_ext[4]; /* Register value */
u8 has_pwm; /* 795g supports 8 pwm, 795adg only supports 2,
* no config register, only affected by chip
* type */
u8 pwm[8][5]; /* Register value, output, freq, start,
* non stop, stop time */
u16 clkin; /* CLKIN frequency in kHz */
u8 pwm_fcms[2]; /* Register value */
u8 pwm_tfmr[6]; /* Register value */
u8 pwm_fomc; /* Register value */
u16 target_speed[8]; /* Register value, target speed for speed
* cruise */
u8 tol_speed; /* tolerance of target speed */
u8 pwm_temp[6][4]; /* TTTI, CTFS, HCT, HOT */
u8 sf4_reg[6][2][7]; /* 6 temp, temp/dcpwm, 7 registers */
u8 setup_pwm[3]; /* Register value */
u8 alarms[6]; /* Register value */
u8 beeps[6]; /* Register value */
char valid;
char valid_limits;
char valid_pwm_config;
};
/*
* Hardware access
* We assume that nobdody can change the bank outside the driver.
*/
/* Must be called with data->update_lock held, except during initialization */
static int w83795_set_bank(struct i2c_client *client, u8 bank)
{
struct w83795_data *data = i2c_get_clientdata(client);
int err;
/* If the same bank is already set, nothing to do */
if ((data->bank & 0x07) == bank)
return 0;
/* Change to new bank, preserve all other bits */
bank |= data->bank & ~0x07;
err = i2c_smbus_write_byte_data(client, W83795_REG_BANKSEL, bank);
if (err < 0) {
dev_err(&client->dev,
"Failed to set bank to %d, err %d\n",
(int)bank, err);
return err;
}
data->bank = bank;
return 0;
}
/* Must be called with data->update_lock held, except during initialization */
static u8 w83795_read(struct i2c_client *client, u16 reg)
{
int err;
err = w83795_set_bank(client, reg >> 8);
if (err < 0)
return 0x00; /* Arbitrary */
err = i2c_smbus_read_byte_data(client, reg & 0xff);
if (err < 0) {
dev_err(&client->dev,
"Failed to read from register 0x%03x, err %d\n",
(int)reg, err);
return 0x00; /* Arbitrary */
}
return err;
}
/* Must be called with data->update_lock held, except during initialization */
static int w83795_write(struct i2c_client *client, u16 reg, u8 value)
{
int err;
err = w83795_set_bank(client, reg >> 8);
if (err < 0)
return err;
err = i2c_smbus_write_byte_data(client, reg & 0xff, value);
if (err < 0)
dev_err(&client->dev,
"Failed to write to register 0x%03x, err %d\n",
(int)reg, err);
return err;
}
static void w83795_update_limits(struct i2c_client *client)
{
struct w83795_data *data = i2c_get_clientdata(client);
int i, limit;
/* Read the voltage limits */
for (i = 0; i < ARRAY_SIZE(data->in); i++) {
if (!(data->has_in & (1 << i)))
continue;
data->in[i][IN_MAX] =
w83795_read(client, W83795_REG_IN[i][IN_MAX]);
data->in[i][IN_LOW] =
w83795_read(client, W83795_REG_IN[i][IN_LOW]);
}
for (i = 0; i < ARRAY_SIZE(data->in_lsb); i++) {
if ((i == 2 && data->chip_type == w83795adg) ||
(i >= 4 && !(data->has_in & (1 << (i + 11)))))
continue;
data->in_lsb[i][IN_MAX] =
w83795_read(client, IN_LSB_REG(i, IN_MAX));
data->in_lsb[i][IN_LOW] =
w83795_read(client, IN_LSB_REG(i, IN_LOW));
}
/* Read the fan limits */
for (i = 0; i < ARRAY_SIZE(data->fan); i++) {
u8 lsb;
/* Each register contains LSB for 2 fans, but we want to
* read it only once to save time */
if ((i & 1) == 0 && (data->has_fan & (3 << i)))
lsb = w83795_read(client, W83795_REG_FAN_MIN_LSB(i));
if (!(data->has_fan & (1 << i)))
continue;
data->fan_min[i] =
w83795_read(client, W83795_REG_FAN_MIN_HL(i)) << 4;
data->fan_min[i] |=
(lsb >> W83795_REG_FAN_MIN_LSB_SHIFT(i)) & 0x0F;
}
/* Read the temperature limits */
for (i = 0; i < ARRAY_SIZE(data->temp); i++) {
if (!(data->has_temp & (1 << i)))
continue;
for (limit = TEMP_CRIT; limit <= TEMP_WARN_HYST; limit++)
data->temp[i][limit] =
w83795_read(client, W83795_REG_TEMP[i][limit]);
}
/* Read the DTS limits */
if (data->enable_dts) {
for (limit = DTS_CRIT; limit <= DTS_WARN_HYST; limit++)
data->dts_ext[limit] =
w83795_read(client, W83795_REG_DTS_EXT(limit));
}
/* Read beep settings */
for (i = 0; i < ARRAY_SIZE(data->beeps); i++)
data->beeps[i] = w83795_read(client, W83795_REG_BEEP(i));
data->valid_limits = 1;
}
static struct w83795_data *w83795_update_pwm_config(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct w83795_data *data = i2c_get_clientdata(client);
int i, tmp;
mutex_lock(&data->update_lock);
if (data->valid_pwm_config)
goto END;
/* Read temperature source selection */
for (i = 0; i < ARRAY_SIZE(data->temp_src); i++)
data->temp_src[i] = w83795_read(client, W83795_REG_TSS(i));
/* Read automatic fan speed control settings */
data->pwm_fcms[0] = w83795_read(client, W83795_REG_FCMS1);
data->pwm_fcms[1] = w83795_read(client, W83795_REG_FCMS2);
for (i = 0; i < ARRAY_SIZE(data->pwm_tfmr); i++)
data->pwm_tfmr[i] = w83795_read(client, W83795_REG_TFMR(i));
data->pwm_fomc = w83795_read(client, W83795_REG_FOMC);
for (i = 0; i < data->has_pwm; i++) {
for (tmp = PWM_FREQ; tmp <= PWM_STOP_TIME; tmp++)
data->pwm[i][tmp] =
w83795_read(client, W83795_REG_PWM(i, tmp));
}
for (i = 0; i < ARRAY_SIZE(data->target_speed); i++) {
data->target_speed[i] =
w83795_read(client, W83795_REG_FTSH(i)) << 4;
data->target_speed[i] |=
w83795_read(client, W83795_REG_FTSL(i)) >> 4;
}
data->tol_speed = w83795_read(client, W83795_REG_TFTS) & 0x3f;
for (i = 0; i < ARRAY_SIZE(data->pwm_temp); i++) {
data->pwm_temp[i][TEMP_PWM_TTTI] =
w83795_read(client, W83795_REG_TTTI(i)) & 0x7f;
data->pwm_temp[i][TEMP_PWM_CTFS] =
w83795_read(client, W83795_REG_CTFS(i));
tmp = w83795_read(client, W83795_REG_HT(i));
data->pwm_temp[i][TEMP_PWM_HCT] = tmp >> 4;
data->pwm_temp[i][TEMP_PWM_HOT] = tmp & 0x0f;
}
/* Read SmartFanIV trip points */
for (i = 0; i < ARRAY_SIZE(data->sf4_reg); i++) {
for (tmp = 0; tmp < 7; tmp++) {
data->sf4_reg[i][SF4_TEMP][tmp] =
w83795_read(client,
W83795_REG_SF4_TEMP(i, tmp));
data->sf4_reg[i][SF4_PWM][tmp] =
w83795_read(client, W83795_REG_SF4_PWM(i, tmp));
}
}
/* Read setup PWM */
for (i = 0; i < ARRAY_SIZE(data->setup_pwm); i++)
data->setup_pwm[i] =
w83795_read(client, W83795_REG_SETUP_PWM(i));
data->valid_pwm_config = 1;
END:
mutex_unlock(&data->update_lock);
return data;
}
static struct w83795_data *w83795_update_device(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct w83795_data *data = i2c_get_clientdata(client);
u16 tmp;
u8 intrusion;
int i;
mutex_lock(&data->update_lock);
if (!data->valid_limits)
w83795_update_limits(client);
if (!(time_after(jiffies, data->last_updated + HZ * 2)
|| !data->valid))
goto END;
/* Update the voltages value */
for (i = 0; i < ARRAY_SIZE(data->in); i++) {
if (!(data->has_in & (1 << i)))
continue;
tmp = w83795_read(client, W83795_REG_IN[i][IN_READ]) << 2;
tmp |= w83795_read(client, W83795_REG_VRLSB) >> 6;
data->in[i][IN_READ] = tmp;
}
/* in0-2 can have dynamic limits (W83795G only) */
if (data->has_dyn_in) {
u8 lsb_max = w83795_read(client, IN_LSB_REG(0, IN_MAX));
u8 lsb_low = w83795_read(client, IN_LSB_REG(0, IN_LOW));
for (i = 0; i < 3; i++) {
if (!(data->has_dyn_in & (1 << i)))
continue;
data->in[i][IN_MAX] =
w83795_read(client, W83795_REG_IN[i][IN_MAX]);
data->in[i][IN_LOW] =
w83795_read(client, W83795_REG_IN[i][IN_LOW]);
data->in_lsb[i][IN_MAX] = (lsb_max >> (2 * i)) & 0x03;
data->in_lsb[i][IN_LOW] = (lsb_low >> (2 * i)) & 0x03;
}
}
/* Update fan */
for (i = 0; i < ARRAY_SIZE(data->fan); i++) {
if (!(data->has_fan & (1 << i)))
continue;
data->fan[i] = w83795_read(client, W83795_REG_FAN(i)) << 4;
data->fan[i] |= w83795_read(client, W83795_REG_VRLSB) >> 4;
}
/* Update temperature */
for (i = 0; i < ARRAY_SIZE(data->temp); i++) {
data->temp[i][TEMP_READ] =
w83795_read(client, W83795_REG_TEMP[i][TEMP_READ]);
data->temp_read_vrlsb[i] =
w83795_read(client, W83795_REG_VRLSB);
}
/* Update dts temperature */
if (data->enable_dts) {
for (i = 0; i < ARRAY_SIZE(data->dts); i++) {
if (!(data->has_dts & (1 << i)))
continue;
data->dts[i] =
w83795_read(client, W83795_REG_DTS(i));
data->dts_read_vrlsb[i] =
w83795_read(client, W83795_REG_VRLSB);
}
}
/* Update pwm output */
for (i = 0; i < data->has_pwm; i++) {
data->pwm[i][PWM_OUTPUT] =
w83795_read(client, W83795_REG_PWM(i, PWM_OUTPUT));
}
/* Update intrusion and alarms
* It is important to read intrusion first, because reading from
* register SMI STS6 clears the interrupt status temporarily. */
tmp = w83795_read(client, W83795_REG_ALARM_CTRL);
/* Switch to interrupt status for intrusion if needed */
if (tmp & ALARM_CTRL_RTSACS)
w83795_write(client, W83795_REG_ALARM_CTRL,
tmp & ~ALARM_CTRL_RTSACS);
intrusion = w83795_read(client, W83795_REG_ALARM(5)) & (1 << 6);
/* Switch to real-time alarms */
w83795_write(client, W83795_REG_ALARM_CTRL, tmp | ALARM_CTRL_RTSACS);
for (i = 0; i < ARRAY_SIZE(data->alarms); i++)
data->alarms[i] = w83795_read(client, W83795_REG_ALARM(i));
data->alarms[5] |= intrusion;
/* Restore original configuration if needed */
if (!(tmp & ALARM_CTRL_RTSACS))
w83795_write(client, W83795_REG_ALARM_CTRL,
tmp & ~ALARM_CTRL_RTSACS);
data->last_updated = jiffies;
data->valid = 1;
END:
mutex_unlock(&data->update_lock);
return data;
}
/*
* Sysfs attributes
*/
#define ALARM_STATUS 0
#define BEEP_ENABLE 1
static ssize_t
show_alarm_beep(struct device *dev, struct device_attribute *attr, char *buf)
{
struct w83795_data *data = w83795_update_device(dev);
struct sensor_device_attribute_2 *sensor_attr =
to_sensor_dev_attr_2(attr);
int nr = sensor_attr->nr;
int index = sensor_attr->index >> 3;
int bit = sensor_attr->index & 0x07;
u8 val;
if (nr == ALARM_STATUS)
val = (data->alarms[index] >> bit) & 1;
else /* BEEP_ENABLE */
val = (data->beeps[index] >> bit) & 1;
return sprintf(buf, "%u\n", val);
}
static ssize_t
store_beep(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct w83795_data *data = i2c_get_clientdata(client);
struct sensor_device_attribute_2 *sensor_attr =
to_sensor_dev_attr_2(attr);
int index = sensor_attr->index >> 3;
int shift = sensor_attr->index & 0x07;
u8 beep_bit = 1 << shift;
unsigned long val;
if (strict_strtoul(buf, 10, &val) < 0)
return -EINVAL;
if (val != 0 && val != 1)
return -EINVAL;
mutex_lock(&data->update_lock);
data->beeps[index] = w83795_read(client, W83795_REG_BEEP(index));
data->beeps[index] &= ~beep_bit;
data->beeps[index] |= val << shift;
w83795_write(client, W83795_REG_BEEP(index), data->beeps[index]);
mutex_unlock(&data->update_lock);
return count;
}
/* Write 0 to clear chassis alarm */
static ssize_t
store_chassis_clear(struct device *dev,
struct device_attribute *attr, const char *buf,
size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct w83795_data *data = i2c_get_clientdata(client);
unsigned long val;
if (strict_strtoul(buf, 10, &val) < 0 || val != 0)
return -EINVAL;
mutex_lock(&data->update_lock);
val = w83795_read(client, W83795_REG_CLR_CHASSIS);
val |= 0x80;
w83795_write(client, W83795_REG_CLR_CHASSIS, val);
/* Clear status and force cache refresh */
w83795_read(client, W83795_REG_ALARM(5));
data->valid = 0;
mutex_unlock(&data->update_lock);
return count;
}
#define FAN_INPUT 0
#define FAN_MIN 1
static ssize_t
show_fan(struct device *dev, struct device_attribute *attr, char *buf)
{
struct sensor_device_attribute_2 *sensor_attr =
to_sensor_dev_attr_2(attr);
int nr = sensor_attr->nr;
int index = sensor_attr->index;
struct w83795_data *data = w83795_update_device(dev);
u16 val;
if (nr == FAN_INPUT)
val = data->fan[index] & 0x0fff;
else
val = data->fan_min[index] & 0x0fff;
return sprintf(buf, "%lu\n", fan_from_reg(val));
}
static ssize_t
store_fan_min(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct sensor_device_attribute_2 *sensor_attr =
to_sensor_dev_attr_2(attr);
int index = sensor_attr->index;
struct i2c_client *client = to_i2c_client(dev);
struct w83795_data *data = i2c_get_clientdata(client);
unsigned long val;
if (strict_strtoul(buf, 10, &val))
return -EINVAL;
val = fan_to_reg(val);
mutex_lock(&data->update_lock);
data->fan_min[index] = val;
w83795_write(client, W83795_REG_FAN_MIN_HL(index), (val >> 4) & 0xff);
val &= 0x0f;
if (index & 1) {
val <<= 4;
val |= w83795_read(client, W83795_REG_FAN_MIN_LSB(index))
& 0x0f;
} else {
val |= w83795_read(client, W83795_REG_FAN_MIN_LSB(index))
& 0xf0;
}
w83795_write(client, W83795_REG_FAN_MIN_LSB(index), val & 0xff);
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t
show_pwm(struct device *dev, struct device_attribute *attr, char *buf)
{
struct w83795_data *data;
struct sensor_device_attribute_2 *sensor_attr =
to_sensor_dev_attr_2(attr);
int nr = sensor_attr->nr;
int index = sensor_attr->index;
unsigned int val;
data = nr == PWM_OUTPUT ? w83795_update_device(dev)
: w83795_update_pwm_config(dev);
switch (nr) {
case PWM_STOP_TIME:
val = time_from_reg(data->pwm[index][nr]);
break;
case PWM_FREQ:
val = pwm_freq_from_reg(data->pwm[index][nr], data->clkin);
break;
default:
val = data->pwm[index][nr];
break;
}
return sprintf(buf, "%u\n", val);
}
static ssize_t
store_pwm(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct w83795_data *data = i2c_get_clientdata(client);
struct sensor_device_attribute_2 *sensor_attr =
to_sensor_dev_attr_2(attr);
int nr = sensor_attr->nr;
int index = sensor_attr->index;
unsigned long val;
if (strict_strtoul(buf, 10, &val) < 0)
return -EINVAL;
mutex_lock(&data->update_lock);
switch (nr) {
case PWM_STOP_TIME:
val = time_to_reg(val);
break;
case PWM_FREQ:
val = pwm_freq_to_reg(val, data->clkin);
break;
default:
val = SENSORS_LIMIT(val, 0, 0xff);
break;
}
w83795_write(client, W83795_REG_PWM(index, nr), val);
data->pwm[index][nr] = val;
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t
show_pwm_enable(struct device *dev, struct device_attribute *attr, char *buf)
{
struct sensor_device_attribute_2 *sensor_attr =
to_sensor_dev_attr_2(attr);
struct w83795_data *data = w83795_update_pwm_config(dev);
int index = sensor_attr->index;
u8 tmp;
/* Speed cruise mode */
if (data->pwm_fcms[0] & (1 << index)) {
tmp = 2;
goto out;
}
/* Thermal cruise or SmartFan IV mode */
for (tmp = 0; tmp < 6; tmp++) {
if (data->pwm_tfmr[tmp] & (1 << index)) {
tmp = 3;
goto out;
}
}
/* Manual mode */
tmp = 1;
out:
return sprintf(buf, "%u\n", tmp);
}
static ssize_t
store_pwm_enable(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct w83795_data *data = w83795_update_pwm_config(dev);
struct sensor_device_attribute_2 *sensor_attr =
to_sensor_dev_attr_2(attr);
int index = sensor_attr->index;
unsigned long val;
int i;
if (strict_strtoul(buf, 10, &val) < 0)
return -EINVAL;
if (val < 1 || val > 2)
return -EINVAL;
mutex_lock(&data->update_lock);
switch (val) {
case 1:
/* Clear speed cruise mode bits */
data->pwm_fcms[0] &= ~(1 << index);
w83795_write(client, W83795_REG_FCMS1, data->pwm_fcms[0]);
/* Clear thermal cruise mode bits */
for (i = 0; i < 6; i++) {
data->pwm_tfmr[i] &= ~(1 << index);
w83795_write(client, W83795_REG_TFMR(i),
data->pwm_tfmr[i]);
}
break;
case 2:
data->pwm_fcms[0] |= (1 << index);
w83795_write(client, W83795_REG_FCMS1, data->pwm_fcms[0]);
break;
}
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t
show_pwm_mode(struct device *dev, struct device_attribute *attr, char *buf)
{
struct w83795_data *data = w83795_update_pwm_config(dev);
int index = to_sensor_dev_attr_2(attr)->index;
unsigned int mode;
if (data->pwm_fomc & (1 << index))
mode = 0; /* DC */
else
mode = 1; /* PWM */
return sprintf(buf, "%u\n", mode);
}
/*
* Check whether a given temperature source can ever be useful.
* Returns the number of selectable temperature channels which are
* enabled.
*/
static int w83795_tss_useful(const struct w83795_data *data, int tsrc)
{
int useful = 0, i;
for (i = 0; i < 4; i++) {
if (tss_map[i][tsrc] == TSS_MAP_RESERVED)
continue;
if (tss_map[i][tsrc] < 6) /* Analog */
useful += (data->has_temp >> tss_map[i][tsrc]) & 1;
else /* Digital */
useful += (data->has_dts >> (tss_map[i][tsrc] - 6)) & 1;
}
return useful;
}
static ssize_t
show_temp_src(struct device *dev, struct device_attribute *attr, char *buf)
{
struct sensor_device_attribute_2 *sensor_attr =
to_sensor_dev_attr_2(attr);
struct w83795_data *data = w83795_update_pwm_config(dev);
int index = sensor_attr->index;
u8 tmp = data->temp_src[index / 2];
if (index & 1)
tmp >>= 4; /* Pick high nibble */
else
tmp &= 0x0f; /* Pick low nibble */
/* Look-up the actual temperature channel number */
if (tmp >= 4 || tss_map[tmp][index] == TSS_MAP_RESERVED)
return -EINVAL; /* Shouldn't happen */
return sprintf(buf, "%u\n", (unsigned int)tss_map[tmp][index] + 1);
}
static ssize_t
store_temp_src(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct w83795_data *data = w83795_update_pwm_config(dev);
struct sensor_device_attribute_2 *sensor_attr =
to_sensor_dev_attr_2(attr);
int index = sensor_attr->index;
int tmp;
unsigned long channel;
u8 val = index / 2;
if (strict_strtoul(buf, 10, &channel) < 0 ||
channel < 1 || channel > 14)
return -EINVAL;
/* Check if request can be fulfilled */
for (tmp = 0; tmp < 4; tmp++) {
if (tss_map[tmp][index] == channel - 1)
break;
}
if (tmp == 4) /* No match */
return -EINVAL;
mutex_lock(&data->update_lock);
if (index & 1) {
tmp <<= 4;
data->temp_src[val] &= 0x0f;
} else {
data->temp_src[val] &= 0xf0;
}
data->temp_src[val] |= tmp;
w83795_write(client, W83795_REG_TSS(val), data->temp_src[val]);
mutex_unlock(&data->update_lock);
return count;
}
#define TEMP_PWM_ENABLE 0
#define TEMP_PWM_FAN_MAP 1
static ssize_t
show_temp_pwm_enable(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct w83795_data *data = w83795_update_pwm_config(dev);
struct sensor_device_attribute_2 *sensor_attr =
to_sensor_dev_attr_2(attr);
int nr = sensor_attr->nr;
int index = sensor_attr->index;
u8 tmp = 0xff;
switch (nr) {
case TEMP_PWM_ENABLE:
tmp = (data->pwm_fcms[1] >> index) & 1;
if (tmp)
tmp = 4;
else
tmp = 3;
break;
case TEMP_PWM_FAN_MAP:
tmp = data->pwm_tfmr[index];
break;
}
return sprintf(buf, "%u\n", tmp);
}
static ssize_t
store_temp_pwm_enable(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct w83795_data *data = w83795_update_pwm_config(dev);
struct sensor_device_attribute_2 *sensor_attr =
to_sensor_dev_attr_2(attr);
int nr = sensor_attr->nr;
int index = sensor_attr->index;
unsigned long tmp;
if (strict_strtoul(buf, 10, &tmp) < 0)
return -EINVAL;
switch (nr) {
case TEMP_PWM_ENABLE:
if (tmp != 3 && tmp != 4)
return -EINVAL;
tmp -= 3;
mutex_lock(&data->update_lock);
data->pwm_fcms[1] &= ~(1 << index);
data->pwm_fcms[1] |= tmp << index;
w83795_write(client, W83795_REG_FCMS2, data->pwm_fcms[1]);
mutex_unlock(&data->update_lock);
break;
case TEMP_PWM_FAN_MAP:
mutex_lock(&data->update_lock);
tmp = SENSORS_LIMIT(tmp, 0, 0xff);
w83795_write(client, W83795_REG_TFMR(index), tmp);
data->pwm_tfmr[index] = tmp;
mutex_unlock(&data->update_lock);
break;
}
return count;
}
#define FANIN_TARGET 0
#define FANIN_TOL 1
static ssize_t
show_fanin(struct device *dev, struct device_attribute *attr, char *buf)
{
struct w83795_data *data = w83795_update_pwm_config(dev);
struct sensor_device_attribute_2 *sensor_attr =
to_sensor_dev_attr_2(attr);
int nr = sensor_attr->nr;
int index = sensor_attr->index;
u16 tmp = 0;
switch (nr) {
case FANIN_TARGET:
tmp = fan_from_reg(data->target_speed[index]);
break;
case FANIN_TOL:
tmp = data->tol_speed;
break;
}
return sprintf(buf, "%u\n", tmp);
}
static ssize_t
store_fanin(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct w83795_data *data = i2c_get_clientdata(client);
struct sensor_device_attribute_2 *sensor_attr =
to_sensor_dev_attr_2(attr);
int nr = sensor_attr->nr;
int index = sensor_attr->index;
unsigned long val;
if (strict_strtoul(buf, 10, &val) < 0)
return -EINVAL;
mutex_lock(&data->update_lock);
switch (nr) {
case FANIN_TARGET:
val = fan_to_reg(SENSORS_LIMIT(val, 0, 0xfff));
w83795_write(client, W83795_REG_FTSH(index), val >> 4);
w83795_write(client, W83795_REG_FTSL(index), (val << 4) & 0xf0);
data->target_speed[index] = val;
break;
case FANIN_TOL:
val = SENSORS_LIMIT(val, 0, 0x3f);
w83795_write(client, W83795_REG_TFTS, val);
data->tol_speed = val;
break;
}
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t
show_temp_pwm(struct device *dev, struct device_attribute *attr, char *buf)
{
struct w83795_data *data = w83795_update_pwm_config(dev);
struct sensor_device_attribute_2 *sensor_attr =
to_sensor_dev_attr_2(attr);
int nr = sensor_attr->nr;
int index = sensor_attr->index;
long tmp = temp_from_reg(data->pwm_temp[index][nr]);
return sprintf(buf, "%ld\n", tmp);
}
static ssize_t
store_temp_pwm(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct w83795_data *data = i2c_get_clientdata(client);
struct sensor_device_attribute_2 *sensor_attr =
to_sensor_dev_attr_2(attr);
int nr = sensor_attr->nr;
int index = sensor_attr->index;
unsigned long val;
u8 tmp;
if (strict_strtoul(buf, 10, &val) < 0)
return -EINVAL;
val /= 1000;
mutex_lock(&data->update_lock);
switch (nr) {
case TEMP_PWM_TTTI:
val = SENSORS_LIMIT(val, 0, 0x7f);
w83795_write(client, W83795_REG_TTTI(index), val);
break;
case TEMP_PWM_CTFS:
val = SENSORS_LIMIT(val, 0, 0x7f);
w83795_write(client, W83795_REG_CTFS(index), val);
break;
case TEMP_PWM_HCT:
val = SENSORS_LIMIT(val, 0, 0x0f);
tmp = w83795_read(client, W83795_REG_HT(index));
tmp &= 0x0f;
tmp |= (val << 4) & 0xf0;
w83795_write(client, W83795_REG_HT(index), tmp);
break;
case TEMP_PWM_HOT:
val = SENSORS_LIMIT(val, 0, 0x0f);
tmp = w83795_read(client, W83795_REG_HT(index));
tmp &= 0xf0;
tmp |= val & 0x0f;
w83795_write(client, W83795_REG_HT(index), tmp);
break;
}
data->pwm_temp[index][nr] = val;
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t
show_sf4_pwm(struct device *dev, struct device_attribute *attr, char *buf)
{
struct w83795_data *data = w83795_update_pwm_config(dev);
struct sensor_device_attribute_2 *sensor_attr =
to_sensor_dev_attr_2(attr);
int nr = sensor_attr->nr;
int index = sensor_attr->index;
return sprintf(buf, "%u\n", data->sf4_reg[index][SF4_PWM][nr]);
}
static ssize_t
store_sf4_pwm(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct w83795_data *data = i2c_get_clientdata(client);
struct sensor_device_attribute_2 *sensor_attr =
to_sensor_dev_attr_2(attr);
int nr = sensor_attr->nr;
int index = sensor_attr->index;
unsigned long val;
if (strict_strtoul(buf, 10, &val) < 0)
return -EINVAL;
mutex_lock(&data->update_lock);
w83795_write(client, W83795_REG_SF4_PWM(index, nr), val);
data->sf4_reg[index][SF4_PWM][nr] = val;
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t
show_sf4_temp(struct device *dev, struct device_attribute *attr, char *buf)
{
struct w83795_data *data = w83795_update_pwm_config(dev);
struct sensor_device_attribute_2 *sensor_attr =
to_sensor_dev_attr_2(attr);
int nr = sensor_attr->nr;
int index = sensor_attr->index;
return sprintf(buf, "%u\n",
(data->sf4_reg[index][SF4_TEMP][nr]) * 1000);
}
static ssize_t
store_sf4_temp(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct w83795_data *data = i2c_get_clientdata(client);
struct sensor_device_attribute_2 *sensor_attr =
to_sensor_dev_attr_2(attr);
int nr = sensor_attr->nr;
int index = sensor_attr->index;
unsigned long val;
if (strict_strtoul(buf, 10, &val) < 0)
return -EINVAL;
val /= 1000;
mutex_lock(&data->update_lock);
w83795_write(client, W83795_REG_SF4_TEMP(index, nr), val);
data->sf4_reg[index][SF4_TEMP][nr] = val;
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t
show_temp(struct device *dev, struct device_attribute *attr, char *buf)
{
struct sensor_device_attribute_2 *sensor_attr =
to_sensor_dev_attr_2(attr);
int nr = sensor_attr->nr;
int index = sensor_attr->index;
struct w83795_data *data = w83795_update_device(dev);
long temp = temp_from_reg(data->temp[index][nr]);
if (nr == TEMP_READ)
temp += (data->temp_read_vrlsb[index] >> 6) * 250;
return sprintf(buf, "%ld\n", temp);
}
static ssize_t
store_temp(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct sensor_device_attribute_2 *sensor_attr =
to_sensor_dev_attr_2(attr);
int nr = sensor_attr->nr;
int index = sensor_attr->index;
struct i2c_client *client = to_i2c_client(dev);
struct w83795_data *data = i2c_get_clientdata(client);
long tmp;
if (strict_strtol(buf, 10, &tmp) < 0)
return -EINVAL;
mutex_lock(&data->update_lock);
data->temp[index][nr] = temp_to_reg(tmp, -128, 127);
w83795_write(client, W83795_REG_TEMP[index][nr], data->temp[index][nr]);
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t
show_dts_mode(struct device *dev, struct device_attribute *attr, char *buf)
{
struct w83795_data *data = dev_get_drvdata(dev);
int tmp;
if (data->enable_dts & 2)
tmp = 5;
else
tmp = 6;
return sprintf(buf, "%d\n", tmp);
}
static ssize_t
show_dts(struct device *dev, struct device_attribute *attr, char *buf)
{
struct sensor_device_attribute_2 *sensor_attr =
to_sensor_dev_attr_2(attr);
int index = sensor_attr->index;
struct w83795_data *data = w83795_update_device(dev);
long temp = temp_from_reg(data->dts[index]);
temp += (data->dts_read_vrlsb[index] >> 6) * 250;
return sprintf(buf, "%ld\n", temp);
}
static ssize_t
show_dts_ext(struct device *dev, struct device_attribute *attr, char *buf)
{
struct sensor_device_attribute_2 *sensor_attr =
to_sensor_dev_attr_2(attr);
int nr = sensor_attr->nr;
struct w83795_data *data = dev_get_drvdata(dev);
long temp = temp_from_reg(data->dts_ext[nr]);
return sprintf(buf, "%ld\n", temp);
}
static ssize_t
store_dts_ext(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct sensor_device_attribute_2 *sensor_attr =
to_sensor_dev_attr_2(attr);
int nr = sensor_attr->nr;
struct i2c_client *client = to_i2c_client(dev);
struct w83795_data *data = i2c_get_clientdata(client);
long tmp;
if (strict_strtol(buf, 10, &tmp) < 0)
return -EINVAL;
mutex_lock(&data->update_lock);
data->dts_ext[nr] = temp_to_reg(tmp, -128, 127);
w83795_write(client, W83795_REG_DTS_EXT(nr), data->dts_ext[nr]);
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t
show_temp_mode(struct device *dev, struct device_attribute *attr, char *buf)
{
struct w83795_data *data = dev_get_drvdata(dev);
struct sensor_device_attribute_2 *sensor_attr =
to_sensor_dev_attr_2(attr);
int index = sensor_attr->index;
int tmp;
if (data->temp_mode & (1 << index))
tmp = 3; /* Thermal diode */
else
tmp = 4; /* Thermistor */
return sprintf(buf, "%d\n", tmp);
}
/* Only for temp1-4 (temp5-6 can only be thermistor) */
static ssize_t
store_temp_mode(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct w83795_data *data = i2c_get_clientdata(client);
struct sensor_device_attribute_2 *sensor_attr =
to_sensor_dev_attr_2(attr);
int index = sensor_attr->index;
int reg_shift;
unsigned long val;
u8 tmp;
if (strict_strtoul(buf, 10, &val) < 0)
return -EINVAL;
if ((val != 4) && (val != 3))
return -EINVAL;
mutex_lock(&data->update_lock);
if (val == 3) {
/* Thermal diode */
val = 0x01;
data->temp_mode |= 1 << index;
} else if (val == 4) {
/* Thermistor */
val = 0x03;
data->temp_mode &= ~(1 << index);
}
reg_shift = 2 * index;
tmp = w83795_read(client, W83795_REG_TEMP_CTRL2);
tmp &= ~(0x03 << reg_shift);
tmp |= val << reg_shift;
w83795_write(client, W83795_REG_TEMP_CTRL2, tmp);
mutex_unlock(&data->update_lock);
return count;
}
/* show/store VIN */
static ssize_t
show_in(struct device *dev, struct device_attribute *attr, char *buf)
{
struct sensor_device_attribute_2 *sensor_attr =
to_sensor_dev_attr_2(attr);
int nr = sensor_attr->nr;
int index = sensor_attr->index;
struct w83795_data *data = w83795_update_device(dev);
u16 val = data->in[index][nr];
u8 lsb_idx;
switch (nr) {
case IN_READ:
/* calculate this value again by sensors as sensors3.conf */
if ((index >= 17) &&
!((data->has_gain >> (index - 17)) & 1))
val *= 8;
break;
case IN_MAX:
case IN_LOW:
lsb_idx = IN_LSB_SHIFT_IDX[index][IN_LSB_IDX];
val <<= 2;
val |= (data->in_lsb[lsb_idx][nr] >>
IN_LSB_SHIFT_IDX[index][IN_LSB_SHIFT]) & 0x03;
if ((index >= 17) &&
!((data->has_gain >> (index - 17)) & 1))
val *= 8;
break;
}
val = in_from_reg(index, val);
return sprintf(buf, "%d\n", val);
}
static ssize_t
store_in(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct sensor_device_attribute_2 *sensor_attr =
to_sensor_dev_attr_2(attr);
int nr = sensor_attr->nr;
int index = sensor_attr->index;
struct i2c_client *client = to_i2c_client(dev);
struct w83795_data *data = i2c_get_clientdata(client);
unsigned long val;
u8 tmp;
u8 lsb_idx;
if (strict_strtoul(buf, 10, &val) < 0)
return -EINVAL;
val = in_to_reg(index, val);
if ((index >= 17) &&
!((data->has_gain >> (index - 17)) & 1))
val /= 8;
val = SENSORS_LIMIT(val, 0, 0x3FF);
mutex_lock(&data->update_lock);
lsb_idx = IN_LSB_SHIFT_IDX[index][IN_LSB_IDX];
tmp = w83795_read(client, IN_LSB_REG(lsb_idx, nr));
tmp &= ~(0x03 << IN_LSB_SHIFT_IDX[index][IN_LSB_SHIFT]);
tmp |= (val & 0x03) << IN_LSB_SHIFT_IDX[index][IN_LSB_SHIFT];
w83795_write(client, IN_LSB_REG(lsb_idx, nr), tmp);
data->in_lsb[lsb_idx][nr] = tmp;
tmp = (val >> 2) & 0xff;
w83795_write(client, W83795_REG_IN[index][nr], tmp);
data->in[index][nr] = tmp;
mutex_unlock(&data->update_lock);
return count;
}
#ifdef CONFIG_SENSORS_W83795_FANCTRL
static ssize_t
show_sf_setup(struct device *dev, struct device_attribute *attr, char *buf)
{
struct sensor_device_attribute_2 *sensor_attr =
to_sensor_dev_attr_2(attr);
int nr = sensor_attr->nr;
struct w83795_data *data = w83795_update_pwm_config(dev);
u16 val = data->setup_pwm[nr];
switch (nr) {
case SETUP_PWM_UPTIME:
case SETUP_PWM_DOWNTIME:
val = time_from_reg(val);
break;
}
return sprintf(buf, "%d\n", val);
}
static ssize_t
store_sf_setup(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct sensor_device_attribute_2 *sensor_attr =
to_sensor_dev_attr_2(attr);
int nr = sensor_attr->nr;
struct i2c_client *client = to_i2c_client(dev);
struct w83795_data *data = i2c_get_clientdata(client);
unsigned long val;
if (strict_strtoul(buf, 10, &val) < 0)
return -EINVAL;
switch (nr) {
case SETUP_PWM_DEFAULT:
val = SENSORS_LIMIT(val, 0, 0xff);
break;
case SETUP_PWM_UPTIME:
case SETUP_PWM_DOWNTIME:
val = time_to_reg(val);
if (val == 0)
return -EINVAL;
break;
}
mutex_lock(&data->update_lock);
data->setup_pwm[nr] = val;
w83795_write(client, W83795_REG_SETUP_PWM(nr), val);
mutex_unlock(&data->update_lock);
return count;
}
#endif
#define NOT_USED -1
/* Don't change the attribute order, _max and _min are accessed by index
* somewhere else in the code */
#define SENSOR_ATTR_IN(index) { \
SENSOR_ATTR_2(in##index##_input, S_IRUGO, show_in, NULL, \
IN_READ, index), \
SENSOR_ATTR_2(in##index##_max, S_IRUGO | S_IWUSR, show_in, \
store_in, IN_MAX, index), \
SENSOR_ATTR_2(in##index##_min, S_IRUGO | S_IWUSR, show_in, \
store_in, IN_LOW, index), \
SENSOR_ATTR_2(in##index##_alarm, S_IRUGO, show_alarm_beep, \
NULL, ALARM_STATUS, index + ((index > 14) ? 1 : 0)), \
SENSOR_ATTR_2(in##index##_beep, S_IWUSR | S_IRUGO, \
show_alarm_beep, store_beep, BEEP_ENABLE, \
index + ((index > 14) ? 1 : 0)) }
#define SENSOR_ATTR_FAN(index) { \
SENSOR_ATTR_2(fan##index##_input, S_IRUGO, show_fan, \
NULL, FAN_INPUT, index - 1), \
SENSOR_ATTR_2(fan##index##_min, S_IWUSR | S_IRUGO, \
show_fan, store_fan_min, FAN_MIN, index - 1), \
SENSOR_ATTR_2(fan##index##_alarm, S_IRUGO, show_alarm_beep, \
NULL, ALARM_STATUS, index + 31), \
SENSOR_ATTR_2(fan##index##_beep, S_IWUSR | S_IRUGO, \
show_alarm_beep, store_beep, BEEP_ENABLE, index + 31) }
#define SENSOR_ATTR_PWM(index) { \
SENSOR_ATTR_2(pwm##index, S_IWUSR | S_IRUGO, show_pwm, \
store_pwm, PWM_OUTPUT, index - 1), \
SENSOR_ATTR_2(pwm##index##_nonstop, S_IWUSR | S_IRUGO, \
show_pwm, store_pwm, PWM_NONSTOP, index - 1), \
SENSOR_ATTR_2(pwm##index##_start, S_IWUSR | S_IRUGO, \
show_pwm, store_pwm, PWM_START, index - 1), \
SENSOR_ATTR_2(pwm##index##_stop_time, S_IWUSR | S_IRUGO, \
show_pwm, store_pwm, PWM_STOP_TIME, index - 1), \
SENSOR_ATTR_2(pwm##index##_freq, S_IWUSR | S_IRUGO, \
show_pwm, store_pwm, PWM_FREQ, index - 1), \
SENSOR_ATTR_2(pwm##index##_enable, S_IWUSR | S_IRUGO, \
show_pwm_enable, store_pwm_enable, NOT_USED, index - 1), \
SENSOR_ATTR_2(pwm##index##_mode, S_IRUGO, \
show_pwm_mode, NULL, NOT_USED, index - 1), \
SENSOR_ATTR_2(fan##index##_target, S_IWUSR | S_IRUGO, \
show_fanin, store_fanin, FANIN_TARGET, index - 1) }
#define SENSOR_ATTR_DTS(index) { \
SENSOR_ATTR_2(temp##index##_type, S_IRUGO , \
show_dts_mode, NULL, NOT_USED, index - 7), \
SENSOR_ATTR_2(temp##index##_input, S_IRUGO, show_dts, \
NULL, NOT_USED, index - 7), \
SENSOR_ATTR_2(temp##index##_crit, S_IRUGO | S_IWUSR, show_dts_ext, \
store_dts_ext, DTS_CRIT, NOT_USED), \
SENSOR_ATTR_2(temp##index##_crit_hyst, S_IRUGO | S_IWUSR, \
show_dts_ext, store_dts_ext, DTS_CRIT_HYST, NOT_USED), \
SENSOR_ATTR_2(temp##index##_max, S_IRUGO | S_IWUSR, show_dts_ext, \
store_dts_ext, DTS_WARN, NOT_USED), \
SENSOR_ATTR_2(temp##index##_max_hyst, S_IRUGO | S_IWUSR, \
show_dts_ext, store_dts_ext, DTS_WARN_HYST, NOT_USED), \
SENSOR_ATTR_2(temp##index##_alarm, S_IRUGO, \
show_alarm_beep, NULL, ALARM_STATUS, index + 17), \
SENSOR_ATTR_2(temp##index##_beep, S_IWUSR | S_IRUGO, \
show_alarm_beep, store_beep, BEEP_ENABLE, index + 17) }
#define SENSOR_ATTR_TEMP(index) { \
SENSOR_ATTR_2(temp##index##_type, S_IRUGO | (index < 4 ? S_IWUSR : 0), \
show_temp_mode, store_temp_mode, NOT_USED, index - 1), \
SENSOR_ATTR_2(temp##index##_input, S_IRUGO, show_temp, \
NULL, TEMP_READ, index - 1), \
SENSOR_ATTR_2(temp##index##_crit, S_IRUGO | S_IWUSR, show_temp, \
store_temp, TEMP_CRIT, index - 1), \
SENSOR_ATTR_2(temp##index##_crit_hyst, S_IRUGO | S_IWUSR, \
show_temp, store_temp, TEMP_CRIT_HYST, index - 1), \
SENSOR_ATTR_2(temp##index##_max, S_IRUGO | S_IWUSR, show_temp, \
store_temp, TEMP_WARN, index - 1), \
SENSOR_ATTR_2(temp##index##_max_hyst, S_IRUGO | S_IWUSR, \
show_temp, store_temp, TEMP_WARN_HYST, index - 1), \
SENSOR_ATTR_2(temp##index##_alarm, S_IRUGO, \
show_alarm_beep, NULL, ALARM_STATUS, \
index + (index > 4 ? 11 : 17)), \
SENSOR_ATTR_2(temp##index##_beep, S_IWUSR | S_IRUGO, \
show_alarm_beep, store_beep, BEEP_ENABLE, \
index + (index > 4 ? 11 : 17)), \
SENSOR_ATTR_2(temp##index##_pwm_enable, S_IWUSR | S_IRUGO, \
show_temp_pwm_enable, store_temp_pwm_enable, \
TEMP_PWM_ENABLE, index - 1), \
SENSOR_ATTR_2(temp##index##_auto_channels_pwm, S_IWUSR | S_IRUGO, \
show_temp_pwm_enable, store_temp_pwm_enable, \
TEMP_PWM_FAN_MAP, index - 1), \
SENSOR_ATTR_2(thermal_cruise##index, S_IWUSR | S_IRUGO, \
show_temp_pwm, store_temp_pwm, TEMP_PWM_TTTI, index - 1), \
SENSOR_ATTR_2(temp##index##_warn, S_IWUSR | S_IRUGO, \
show_temp_pwm, store_temp_pwm, TEMP_PWM_CTFS, index - 1), \
SENSOR_ATTR_2(temp##index##_warn_hyst, S_IWUSR | S_IRUGO, \
show_temp_pwm, store_temp_pwm, TEMP_PWM_HCT, index - 1), \
SENSOR_ATTR_2(temp##index##_operation_hyst, S_IWUSR | S_IRUGO, \
show_temp_pwm, store_temp_pwm, TEMP_PWM_HOT, index - 1), \
SENSOR_ATTR_2(temp##index##_auto_point1_pwm, S_IRUGO | S_IWUSR, \
show_sf4_pwm, store_sf4_pwm, 0, index - 1), \
SENSOR_ATTR_2(temp##index##_auto_point2_pwm, S_IRUGO | S_IWUSR, \
show_sf4_pwm, store_sf4_pwm, 1, index - 1), \
SENSOR_ATTR_2(temp##index##_auto_point3_pwm, S_IRUGO | S_IWUSR, \
show_sf4_pwm, store_sf4_pwm, 2, index - 1), \
SENSOR_ATTR_2(temp##index##_auto_point4_pwm, S_IRUGO | S_IWUSR, \
show_sf4_pwm, store_sf4_pwm, 3, index - 1), \
SENSOR_ATTR_2(temp##index##_auto_point5_pwm, S_IRUGO | S_IWUSR, \
show_sf4_pwm, store_sf4_pwm, 4, index - 1), \
SENSOR_ATTR_2(temp##index##_auto_point6_pwm, S_IRUGO | S_IWUSR, \
show_sf4_pwm, store_sf4_pwm, 5, index - 1), \
SENSOR_ATTR_2(temp##index##_auto_point7_pwm, S_IRUGO | S_IWUSR, \
show_sf4_pwm, store_sf4_pwm, 6, index - 1), \
SENSOR_ATTR_2(temp##index##_auto_point1_temp, S_IRUGO | S_IWUSR,\
show_sf4_temp, store_sf4_temp, 0, index - 1), \
SENSOR_ATTR_2(temp##index##_auto_point2_temp, S_IRUGO | S_IWUSR,\
show_sf4_temp, store_sf4_temp, 1, index - 1), \
SENSOR_ATTR_2(temp##index##_auto_point3_temp, S_IRUGO | S_IWUSR,\
show_sf4_temp, store_sf4_temp, 2, index - 1), \
SENSOR_ATTR_2(temp##index##_auto_point4_temp, S_IRUGO | S_IWUSR,\
show_sf4_temp, store_sf4_temp, 3, index - 1), \
SENSOR_ATTR_2(temp##index##_auto_point5_temp, S_IRUGO | S_IWUSR,\
show_sf4_temp, store_sf4_temp, 4, index - 1), \
SENSOR_ATTR_2(temp##index##_auto_point6_temp, S_IRUGO | S_IWUSR,\
show_sf4_temp, store_sf4_temp, 5, index - 1), \
SENSOR_ATTR_2(temp##index##_auto_point7_temp, S_IRUGO | S_IWUSR,\
show_sf4_temp, store_sf4_temp, 6, index - 1) }
static struct sensor_device_attribute_2 w83795_in[][5] = {
SENSOR_ATTR_IN(0),
SENSOR_ATTR_IN(1),
SENSOR_ATTR_IN(2),
SENSOR_ATTR_IN(3),
SENSOR_ATTR_IN(4),
SENSOR_ATTR_IN(5),
SENSOR_ATTR_IN(6),
SENSOR_ATTR_IN(7),
SENSOR_ATTR_IN(8),
SENSOR_ATTR_IN(9),
SENSOR_ATTR_IN(10),
SENSOR_ATTR_IN(11),
SENSOR_ATTR_IN(12),
SENSOR_ATTR_IN(13),
SENSOR_ATTR_IN(14),
SENSOR_ATTR_IN(15),
SENSOR_ATTR_IN(16),
SENSOR_ATTR_IN(17),
SENSOR_ATTR_IN(18),
SENSOR_ATTR_IN(19),
SENSOR_ATTR_IN(20),
};
static const struct sensor_device_attribute_2 w83795_fan[][4] = {
SENSOR_ATTR_FAN(1),
SENSOR_ATTR_FAN(2),
SENSOR_ATTR_FAN(3),
SENSOR_ATTR_FAN(4),
SENSOR_ATTR_FAN(5),
SENSOR_ATTR_FAN(6),
SENSOR_ATTR_FAN(7),
SENSOR_ATTR_FAN(8),
SENSOR_ATTR_FAN(9),
SENSOR_ATTR_FAN(10),
SENSOR_ATTR_FAN(11),
SENSOR_ATTR_FAN(12),
SENSOR_ATTR_FAN(13),
SENSOR_ATTR_FAN(14),
};
static const struct sensor_device_attribute_2 w83795_temp[][28] = {
SENSOR_ATTR_TEMP(1),
SENSOR_ATTR_TEMP(2),
SENSOR_ATTR_TEMP(3),
SENSOR_ATTR_TEMP(4),
SENSOR_ATTR_TEMP(5),
SENSOR_ATTR_TEMP(6),
};
static const struct sensor_device_attribute_2 w83795_dts[][8] = {
SENSOR_ATTR_DTS(7),
SENSOR_ATTR_DTS(8),
SENSOR_ATTR_DTS(9),
SENSOR_ATTR_DTS(10),
SENSOR_ATTR_DTS(11),
SENSOR_ATTR_DTS(12),
SENSOR_ATTR_DTS(13),
SENSOR_ATTR_DTS(14),
};
static const struct sensor_device_attribute_2 w83795_pwm[][8] = {
SENSOR_ATTR_PWM(1),
SENSOR_ATTR_PWM(2),
SENSOR_ATTR_PWM(3),
SENSOR_ATTR_PWM(4),
SENSOR_ATTR_PWM(5),
SENSOR_ATTR_PWM(6),
SENSOR_ATTR_PWM(7),
SENSOR_ATTR_PWM(8),
};
static const struct sensor_device_attribute_2 w83795_tss[6] = {
SENSOR_ATTR_2(temp1_source_sel, S_IWUSR | S_IRUGO,
show_temp_src, store_temp_src, NOT_USED, 0),
SENSOR_ATTR_2(temp2_source_sel, S_IWUSR | S_IRUGO,
show_temp_src, store_temp_src, NOT_USED, 1),
SENSOR_ATTR_2(temp3_source_sel, S_IWUSR | S_IRUGO,
show_temp_src, store_temp_src, NOT_USED, 2),
SENSOR_ATTR_2(temp4_source_sel, S_IWUSR | S_IRUGO,
show_temp_src, store_temp_src, NOT_USED, 3),
SENSOR_ATTR_2(temp5_source_sel, S_IWUSR | S_IRUGO,
show_temp_src, store_temp_src, NOT_USED, 4),
SENSOR_ATTR_2(temp6_source_sel, S_IWUSR | S_IRUGO,
show_temp_src, store_temp_src, NOT_USED, 5),
};
static const struct sensor_device_attribute_2 sda_single_files[] = {
SENSOR_ATTR_2(intrusion0_alarm, S_IWUSR | S_IRUGO, show_alarm_beep,
store_chassis_clear, ALARM_STATUS, 46),
SENSOR_ATTR_2(intrusion0_beep, S_IWUSR | S_IRUGO, show_alarm_beep,
store_beep, BEEP_ENABLE, 46),
SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_alarm_beep,
store_beep, BEEP_ENABLE, 47),
#ifdef CONFIG_SENSORS_W83795_FANCTRL
SENSOR_ATTR_2(speed_cruise_tolerance, S_IWUSR | S_IRUGO, show_fanin,
store_fanin, FANIN_TOL, NOT_USED),
SENSOR_ATTR_2(pwm_default, S_IWUSR | S_IRUGO, show_sf_setup,
store_sf_setup, SETUP_PWM_DEFAULT, NOT_USED),
SENSOR_ATTR_2(pwm_uptime, S_IWUSR | S_IRUGO, show_sf_setup,
store_sf_setup, SETUP_PWM_UPTIME, NOT_USED),
SENSOR_ATTR_2(pwm_downtime, S_IWUSR | S_IRUGO, show_sf_setup,
store_sf_setup, SETUP_PWM_DOWNTIME, NOT_USED),
#endif
};
/*
* Driver interface
*/
static void w83795_init_client(struct i2c_client *client)
{
struct w83795_data *data = i2c_get_clientdata(client);
static const u16 clkin[4] = { /* in kHz */
14318, 24000, 33333, 48000
};
u8 config;
if (reset)
w83795_write(client, W83795_REG_CONFIG, 0x80);
/* Start monitoring if needed */
config = w83795_read(client, W83795_REG_CONFIG);
if (!(config & W83795_REG_CONFIG_START)) {
dev_info(&client->dev, "Enabling monitoring operations\n");
w83795_write(client, W83795_REG_CONFIG,
config | W83795_REG_CONFIG_START);
}
data->clkin = clkin[(config >> 3) & 0x3];
dev_dbg(&client->dev, "clkin = %u kHz\n", data->clkin);
}
static int w83795_get_device_id(struct i2c_client *client)
{
int device_id;
device_id = i2c_smbus_read_byte_data(client, W83795_REG_DEVICEID);
/* Special case for rev. A chips; can't be checked first because later
revisions emulate this for compatibility */
if (device_id < 0 || (device_id & 0xf0) != 0x50) {
int alt_id;
alt_id = i2c_smbus_read_byte_data(client,
W83795_REG_DEVICEID_A);
if (alt_id == 0x50)
device_id = alt_id;
}
return device_id;
}
/* Return 0 if detection is successful, -ENODEV otherwise */
static int w83795_detect(struct i2c_client *client,
struct i2c_board_info *info)
{
int bank, vendor_id, device_id, expected, i2c_addr, config;
struct i2c_adapter *adapter = client->adapter;
unsigned short address = client->addr;
const char *chip_name;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
bank = i2c_smbus_read_byte_data(client, W83795_REG_BANKSEL);
if (bank < 0 || (bank & 0x7c)) {
dev_dbg(&adapter->dev,
"w83795: Detection failed at addr 0x%02hx, check %s\n",
address, "bank");
return -ENODEV;
}
/* Check Nuvoton vendor ID */
vendor_id = i2c_smbus_read_byte_data(client, W83795_REG_VENDORID);
expected = bank & 0x80 ? 0x5c : 0xa3;
if (vendor_id != expected) {
dev_dbg(&adapter->dev,
"w83795: Detection failed at addr 0x%02hx, check %s\n",
address, "vendor id");
return -ENODEV;
}
/* Check device ID */
device_id = w83795_get_device_id(client) |
(i2c_smbus_read_byte_data(client, W83795_REG_CHIPID) << 8);
if ((device_id >> 4) != 0x795) {
dev_dbg(&adapter->dev,
"w83795: Detection failed at addr 0x%02hx, check %s\n",
address, "device id\n");
return -ENODEV;
}
/* If Nuvoton chip, address of chip and W83795_REG_I2C_ADDR
should match */
if ((bank & 0x07) == 0) {
i2c_addr = i2c_smbus_read_byte_data(client,
W83795_REG_I2C_ADDR);
if ((i2c_addr & 0x7f) != address) {
dev_dbg(&adapter->dev,
"w83795: Detection failed at addr 0x%02hx, "
"check %s\n", address, "i2c addr");
return -ENODEV;
}
}
/* Check 795 chip type: 795G or 795ADG
Usually we don't write to chips during detection, but here we don't
quite have the choice; hopefully it's OK, we are about to return
success anyway */
if ((bank & 0x07) != 0)
i2c_smbus_write_byte_data(client, W83795_REG_BANKSEL,
bank & ~0x07);
config = i2c_smbus_read_byte_data(client, W83795_REG_CONFIG);
if (config & W83795_REG_CONFIG_CONFIG48)
chip_name = "w83795adg";
else
chip_name = "w83795g";
strlcpy(info->type, chip_name, I2C_NAME_SIZE);
dev_info(&adapter->dev, "Found %s rev. %c at 0x%02hx\n", chip_name,
'A' + (device_id & 0xf), address);
return 0;
}
static int w83795_handle_files(struct device *dev, int (*fn)(struct device *,
const struct device_attribute *))
{
struct w83795_data *data = dev_get_drvdata(dev);
int err, i, j;
for (i = 0; i < ARRAY_SIZE(w83795_in); i++) {
if (!(data->has_in & (1 << i)))
continue;
for (j = 0; j < ARRAY_SIZE(w83795_in[0]); j++) {
err = fn(dev, &w83795_in[i][j].dev_attr);
if (err)
return err;
}
}
for (i = 0; i < ARRAY_SIZE(w83795_fan); i++) {
if (!(data->has_fan & (1 << i)))
continue;
for (j = 0; j < ARRAY_SIZE(w83795_fan[0]); j++) {
err = fn(dev, &w83795_fan[i][j].dev_attr);
if (err)
return err;
}
}
for (i = 0; i < ARRAY_SIZE(w83795_tss); i++) {
j = w83795_tss_useful(data, i);
if (!j)
continue;
err = fn(dev, &w83795_tss[i].dev_attr);
if (err)
return err;
}
for (i = 0; i < ARRAY_SIZE(sda_single_files); i++) {
err = fn(dev, &sda_single_files[i].dev_attr);
if (err)
return err;
}
#ifdef CONFIG_SENSORS_W83795_FANCTRL
for (i = 0; i < data->has_pwm; i++) {
for (j = 0; j < ARRAY_SIZE(w83795_pwm[0]); j++) {
err = fn(dev, &w83795_pwm[i][j].dev_attr);
if (err)
return err;
}
}
#endif
for (i = 0; i < ARRAY_SIZE(w83795_temp); i++) {
if (!(data->has_temp & (1 << i)))
continue;
#ifdef CONFIG_SENSORS_W83795_FANCTRL
for (j = 0; j < ARRAY_SIZE(w83795_temp[0]); j++) {
#else
for (j = 0; j < 8; j++) {
#endif
err = fn(dev, &w83795_temp[i][j].dev_attr);
if (err)
return err;
}
}
if (data->enable_dts) {
for (i = 0; i < ARRAY_SIZE(w83795_dts); i++) {
if (!(data->has_dts & (1 << i)))
continue;
for (j = 0; j < ARRAY_SIZE(w83795_dts[0]); j++) {
err = fn(dev, &w83795_dts[i][j].dev_attr);
if (err)
return err;
}
}
}
return 0;
}
/* We need a wrapper that fits in w83795_handle_files */
static int device_remove_file_wrapper(struct device *dev,
const struct device_attribute *attr)
{
device_remove_file(dev, attr);
return 0;
}
static void w83795_check_dynamic_in_limits(struct i2c_client *client)
{
struct w83795_data *data = i2c_get_clientdata(client);
u8 vid_ctl;
int i, err_max, err_min;
vid_ctl = w83795_read(client, W83795_REG_VID_CTRL);
/* Return immediately if VRM isn't configured */
if ((vid_ctl & 0x07) == 0x00 || (vid_ctl & 0x07) == 0x07)
return;
data->has_dyn_in = (vid_ctl >> 3) & 0x07;
for (i = 0; i < 2; i++) {
if (!(data->has_dyn_in & (1 << i)))
continue;
/* Voltage limits in dynamic mode, switch to read-only */
err_max = sysfs_chmod_file(&client->dev.kobj,
&w83795_in[i][2].dev_attr.attr,
S_IRUGO);
err_min = sysfs_chmod_file(&client->dev.kobj,
&w83795_in[i][3].dev_attr.attr,
S_IRUGO);
if (err_max || err_min)
dev_warn(&client->dev, "Failed to set in%d limits "
"read-only (%d, %d)\n", i, err_max, err_min);
else
dev_info(&client->dev, "in%d limits set dynamically "
"from VID\n", i);
}
}
/* Check pins that can be used for either temperature or voltage monitoring */
static void w83795_apply_temp_config(struct w83795_data *data, u8 config,
int temp_chan, int in_chan)
{
/* config is a 2-bit value */
switch (config) {
case 0x2: /* Voltage monitoring */
data->has_in |= 1 << in_chan;
break;
case 0x1: /* Thermal diode */
if (temp_chan >= 4)
break;
data->temp_mode |= 1 << temp_chan;
/* fall through */
case 0x3: /* Thermistor */
data->has_temp |= 1 << temp_chan;
break;
}
}
static int w83795_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int i;
u8 tmp;
struct device *dev = &client->dev;
struct w83795_data *data;
int err;
data = kzalloc(sizeof(struct w83795_data), GFP_KERNEL);
if (!data) {
err = -ENOMEM;
goto exit;
}
i2c_set_clientdata(client, data);
data->chip_type = id->driver_data;
data->bank = i2c_smbus_read_byte_data(client, W83795_REG_BANKSEL);
mutex_init(&data->update_lock);
/* Initialize the chip */
w83795_init_client(client);
/* Check which voltages and fans are present */
data->has_in = w83795_read(client, W83795_REG_VOLT_CTRL1)
| (w83795_read(client, W83795_REG_VOLT_CTRL2) << 8);
data->has_fan = w83795_read(client, W83795_REG_FANIN_CTRL1)
| (w83795_read(client, W83795_REG_FANIN_CTRL2) << 8);
/* Check which analog temperatures and extra voltages are present */
tmp = w83795_read(client, W83795_REG_TEMP_CTRL1);
if (tmp & 0x20)
data->enable_dts = 1;
w83795_apply_temp_config(data, (tmp >> 2) & 0x3, 5, 16);
w83795_apply_temp_config(data, tmp & 0x3, 4, 15);
tmp = w83795_read(client, W83795_REG_TEMP_CTRL2);
w83795_apply_temp_config(data, tmp >> 6, 3, 20);
w83795_apply_temp_config(data, (tmp >> 4) & 0x3, 2, 19);
w83795_apply_temp_config(data, (tmp >> 2) & 0x3, 1, 18);
w83795_apply_temp_config(data, tmp & 0x3, 0, 17);
/* Check DTS enable status */
if (data->enable_dts) {
if (1 & w83795_read(client, W83795_REG_DTSC))
data->enable_dts |= 2;
data->has_dts = w83795_read(client, W83795_REG_DTSE);
}
/* Report PECI Tbase values */
if (data->enable_dts == 1) {
for (i = 0; i < 8; i++) {
if (!(data->has_dts & (1 << i)))
continue;
tmp = w83795_read(client, W83795_REG_PECI_TBASE(i));
dev_info(&client->dev,
"PECI agent %d Tbase temperature: %u\n",
i + 1, (unsigned int)tmp & 0x7f);
}
}
data->has_gain = w83795_read(client, W83795_REG_VMIGB_CTRL) & 0x0f;
/* pwm and smart fan */
if (data->chip_type == w83795g)
data->has_pwm = 8;
else
data->has_pwm = 2;
err = w83795_handle_files(dev, device_create_file);
if (err)
goto exit_remove;
if (data->chip_type == w83795g)
w83795_check_dynamic_in_limits(client);
data->hwmon_dev = hwmon_device_register(dev);
if (IS_ERR(data->hwmon_dev)) {
err = PTR_ERR(data->hwmon_dev);
goto exit_remove;
}
return 0;
exit_remove:
w83795_handle_files(dev, device_remove_file_wrapper);
kfree(data);
exit:
return err;
}
static int w83795_remove(struct i2c_client *client)
{
struct w83795_data *data = i2c_get_clientdata(client);
hwmon_device_unregister(data->hwmon_dev);
w83795_handle_files(&client->dev, device_remove_file_wrapper);
kfree(data);
return 0;
}
static const struct i2c_device_id w83795_id[] = {
{ "w83795g", w83795g },
{ "w83795adg", w83795adg },
{ }
};
MODULE_DEVICE_TABLE(i2c, w83795_id);
static struct i2c_driver w83795_driver = {
.driver = {
.name = "w83795",
},
.probe = w83795_probe,
.remove = w83795_remove,
.id_table = w83795_id,
.class = I2C_CLASS_HWMON,
.detect = w83795_detect,
.address_list = normal_i2c,
};
static int __init sensors_w83795_init(void)
{
return i2c_add_driver(&w83795_driver);
}
static void __exit sensors_w83795_exit(void)
{
i2c_del_driver(&w83795_driver);
}
MODULE_AUTHOR("Wei Song, Jean Delvare <khali@linux-fr.org>");
MODULE_DESCRIPTION("W83795G/ADG hardware monitoring driver");
MODULE_LICENSE("GPL");
module_init(sensors_w83795_init);
module_exit(sensors_w83795_exit);
View Git Blame Copy Permalink