mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-21 19:53:59 +08:00
78ca0b2873
Because time stamping on both external ports of the switch simultaneously is positively useless from the application's point of view, this patch provides a DT configuration method to choose the active port. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
116 lines
3.5 KiB
Plaintext
116 lines
3.5 KiB
Plaintext
TI SoC Ethernet Switch Controller Device Tree Bindings
|
|
------------------------------------------------------
|
|
|
|
Required properties:
|
|
- compatible : Should be "ti,cpsw"
|
|
- reg : physical base address and size of the cpsw
|
|
registers map
|
|
- interrupts : property with a value describing the interrupt
|
|
number
|
|
- interrupt-parent : The parent interrupt controller
|
|
- cpdma_channels : Specifies number of channels in CPDMA
|
|
- host_port_no : Specifies host port shift
|
|
- cpdma_reg_ofs : Specifies CPDMA submodule register offset
|
|
- cpdma_sram_ofs : Specifies CPDMA SRAM offset
|
|
- ale_reg_ofs : Specifies ALE submodule register offset
|
|
- ale_entries : Specifies No of entries ALE can hold
|
|
- host_port_reg_ofs : Specifies host port register offset
|
|
- hw_stats_reg_ofs : Specifies hardware statistics register offset
|
|
- cpts_reg_ofs : Specifies the offset of the CPTS registers
|
|
- bd_ram_ofs : Specifies internal desciptor RAM offset
|
|
- bd_ram_size : Specifies internal descriptor RAM size
|
|
- rx_descs : Specifies number of Rx descriptors
|
|
- mac_control : Specifies Default MAC control register content
|
|
for the specific platform
|
|
- slaves : Specifies number for slaves
|
|
- cpts_active_slave : Specifies the slave to use for time stamping
|
|
- slave_reg_ofs : Specifies slave register offset
|
|
- sliver_reg_ofs : Specifies slave sliver register offset
|
|
- phy_id : Specifies slave phy id
|
|
- mac-address : Specifies slave MAC address
|
|
|
|
Optional properties:
|
|
- ti,hwmods : Must be "cpgmac0"
|
|
- no_bd_ram : Must be 0 or 1
|
|
|
|
Note: "ti,hwmods" field is used to fetch the base address and irq
|
|
resources from TI, omap hwmod data base during device registration.
|
|
Future plan is to migrate hwmod data base contents into device tree
|
|
blob so that, all the required data will be used from device tree dts
|
|
file.
|
|
|
|
Examples:
|
|
|
|
mac: ethernet@4A100000 {
|
|
compatible = "ti,cpsw";
|
|
reg = <0x4A100000 0x1000>;
|
|
interrupts = <55 0x4>;
|
|
interrupt-parent = <&intc>;
|
|
cpdma_channels = <8>;
|
|
host_port_no = <0>;
|
|
cpdma_reg_ofs = <0x800>;
|
|
cpdma_sram_ofs = <0xa00>;
|
|
ale_reg_ofs = <0xd00>;
|
|
ale_entries = <1024>;
|
|
host_port_reg_ofs = <0x108>;
|
|
hw_stats_reg_ofs = <0x900>;
|
|
cpts_reg_ofs = <0xc00>;
|
|
bd_ram_ofs = <0x2000>;
|
|
bd_ram_size = <0x2000>;
|
|
no_bd_ram = <0>;
|
|
rx_descs = <64>;
|
|
mac_control = <0x20>;
|
|
slaves = <2>;
|
|
cpts_active_slave = <0>;
|
|
cpsw_emac0: slave@0 {
|
|
slave_reg_ofs = <0x200>;
|
|
sliver_reg_ofs = <0xd80>;
|
|
phy_id = "davinci_mdio.16:00";
|
|
/* Filled in by U-Boot */
|
|
mac-address = [ 00 00 00 00 00 00 ];
|
|
};
|
|
cpsw_emac1: slave@1 {
|
|
slave_reg_ofs = <0x300>;
|
|
sliver_reg_ofs = <0xdc0>;
|
|
phy_id = "davinci_mdio.16:01";
|
|
/* Filled in by U-Boot */
|
|
mac-address = [ 00 00 00 00 00 00 ];
|
|
};
|
|
};
|
|
|
|
(or)
|
|
mac: ethernet@4A100000 {
|
|
compatible = "ti,cpsw";
|
|
ti,hwmods = "cpgmac0";
|
|
cpdma_channels = <8>;
|
|
host_port_no = <0>;
|
|
cpdma_reg_ofs = <0x800>;
|
|
cpdma_sram_ofs = <0xa00>;
|
|
ale_reg_ofs = <0xd00>;
|
|
ale_entries = <1024>;
|
|
host_port_reg_ofs = <0x108>;
|
|
hw_stats_reg_ofs = <0x900>;
|
|
cpts_reg_ofs = <0xc00>;
|
|
bd_ram_ofs = <0x2000>;
|
|
bd_ram_size = <0x2000>;
|
|
no_bd_ram = <0>;
|
|
rx_descs = <64>;
|
|
mac_control = <0x20>;
|
|
slaves = <2>;
|
|
cpts_active_slave = <0>;
|
|
cpsw_emac0: slave@0 {
|
|
slave_reg_ofs = <0x200>;
|
|
sliver_reg_ofs = <0xd80>;
|
|
phy_id = "davinci_mdio.16:00";
|
|
/* Filled in by U-Boot */
|
|
mac-address = [ 00 00 00 00 00 00 ];
|
|
};
|
|
cpsw_emac1: slave@1 {
|
|
slave_reg_ofs = <0x300>;
|
|
sliver_reg_ofs = <0xdc0>;
|
|
phy_id = "davinci_mdio.16:01";
|
|
/* Filled in by U-Boot */
|
|
mac-address = [ 00 00 00 00 00 00 ];
|
|
};
|
|
};
|