renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-18 18:23:53 +08:00
Code
78beef629f
linux-next/drivers/net/wireless/realtek/rtl818x/rtl818x.h
Thomas Gleixner d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00

403 lines
12 KiB
C
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Definitions for RTL818x hardware
*
* Copyright 2007 Michael Wu <flamingice@sourmilk.net>
* Copyright 2007 Andrea Merello <andrea.merello@gmail.com>
*
* Based on the r8187 driver, which is:
* Copyright 2005 Andrea Merello <andrea.merello@gmail.com>, et al.
*/
#ifndef RTL818X_H
#define RTL818X_H
struct rtl818x_csr {
u8 MAC[6];
u8 reserved_0[2];
union {
__le32 MAR[2]; /* 0x8 */
struct{ /* rtl8187se */
u8 rf_sw_config; /* 0x8 */
u8 reserved_01[3];
__le32 TMGDA; /* 0xc */
} __packed;
} __packed;
union { /* 0x10 */
struct {
u8 RX_FIFO_COUNT;
u8 reserved_1;
u8 TX_FIFO_COUNT;
u8 BQREQ;
} __packed;
__le32 TBKDA; /* for 8187se */
} __packed;
__le32 TBEDA; /* 0x14 - for rtl8187se */
__le32 TSFT[2];
union { /* 0x20 */
__le32 TLPDA;
__le32 TVIDA; /* for 8187se */
} __packed;
union { /* 0x24 */
__le32 TNPDA;
__le32 TVODA; /* for 8187se */
} __packed;
/* hi pri ring for all cards */
__le32 THPDA; /* 0x28 */
union { /* 0x2c */
struct {
u8 reserved_2a;
u8 EIFS_8187SE;
} __packed;
__le16 BRSR;
} __packed;
u8 BSSID[6]; /* 0x2e */
union { /* 0x34 */
struct {
u8 RESP_RATE;
u8 EIFS;
} __packed;
__le16 BRSR_8187SE;
} __packed;
u8 reserved_3[1]; /* 0x36 */
u8 CMD; /* 0x37 */
#define RTL818X_CMD_TX_ENABLE (1 << 2)
#define RTL818X_CMD_RX_ENABLE (1 << 3)
#define RTL818X_CMD_RESET (1 << 4)
u8 reserved_4[4]; /* 0x38 */
union {
struct {
__le16 INT_MASK;
__le16 INT_STATUS;
} __packed;
__le32 INT_STATUS_SE; /* 0x3c */
} __packed;
/* status bits for rtl8187 and rtl8180/8185 */
#define RTL818X_INT_RX_OK (1 << 0)
#define RTL818X_INT_RX_ERR (1 << 1)
#define RTL818X_INT_TXL_OK (1 << 2)
#define RTL818X_INT_TXL_ERR (1 << 3)
#define RTL818X_INT_RX_DU (1 << 4)
#define RTL818X_INT_RX_FO (1 << 5)
#define RTL818X_INT_TXN_OK (1 << 6)
#define RTL818X_INT_TXN_ERR (1 << 7)
#define RTL818X_INT_TXH_OK (1 << 8)
#define RTL818X_INT_TXH_ERR (1 << 9)
#define RTL818X_INT_TXB_OK (1 << 10)
#define RTL818X_INT_TXB_ERR (1 << 11)
#define RTL818X_INT_ATIM (1 << 12)
#define RTL818X_INT_BEACON (1 << 13)
#define RTL818X_INT_TIME_OUT (1 << 14)
#define RTL818X_INT_TX_FO (1 << 15)
/* status bits for rtl8187se */
#define RTL818X_INT_SE_TIMER3 (1 << 0)
#define RTL818X_INT_SE_TIMER2 (1 << 1)
#define RTL818X_INT_SE_RQ0SOR (1 << 2)
#define RTL818X_INT_SE_TXBED_OK (1 << 3)
#define RTL818X_INT_SE_TXBED_ERR (1 << 4)
#define RTL818X_INT_SE_TXBE_OK (1 << 5)
#define RTL818X_INT_SE_TXBE_ERR (1 << 6)
#define RTL818X_INT_SE_RX_OK (1 << 7)
#define RTL818X_INT_SE_RX_ERR (1 << 8)
#define RTL818X_INT_SE_TXL_OK (1 << 9)
#define RTL818X_INT_SE_TXL_ERR (1 << 10)
#define RTL818X_INT_SE_RX_DU (1 << 11)
#define RTL818X_INT_SE_RX_FIFO (1 << 12)
#define RTL818X_INT_SE_TXN_OK (1 << 13)
#define RTL818X_INT_SE_TXN_ERR (1 << 14)
#define RTL818X_INT_SE_TXH_OK (1 << 15)
#define RTL818X_INT_SE_TXH_ERR (1 << 16)
#define RTL818X_INT_SE_TXB_OK (1 << 17)
#define RTL818X_INT_SE_TXB_ERR (1 << 18)
#define RTL818X_INT_SE_ATIM_TO (1 << 19)
#define RTL818X_INT_SE_BK_TO (1 << 20)
#define RTL818X_INT_SE_TIMER1 (1 << 21)
#define RTL818X_INT_SE_TX_FIFO (1 << 22)
#define RTL818X_INT_SE_WAKEUP (1 << 23)
#define RTL818X_INT_SE_BK_DMA (1 << 24)
#define RTL818X_INT_SE_TMGD_OK (1 << 30)
__le32 TX_CONF; /* 0x40 */
#define RTL818X_TX_CONF_LOOPBACK_MAC (1 << 17)
#define RTL818X_TX_CONF_LOOPBACK_CONT (3 << 17)
#define RTL818X_TX_CONF_NO_ICV (1 << 19)
#define RTL818X_TX_CONF_DISCW (1 << 20)
#define RTL818X_TX_CONF_SAT_HWPLCP (1 << 24)
#define RTL818X_TX_CONF_R8180_ABCD (2 << 25)
#define RTL818X_TX_CONF_R8180_F (3 << 25)
#define RTL818X_TX_CONF_R8185_ABC (4 << 25)
#define RTL818X_TX_CONF_R8185_D (5 << 25)
#define RTL818X_TX_CONF_R8187vD (5 << 25)
#define RTL818X_TX_CONF_R8187vD_B (6 << 25)
#define RTL818X_TX_CONF_RTL8187SE (6 << 25)
#define RTL818X_TX_CONF_HWVER_MASK (7 << 25)
#define RTL818X_TX_CONF_DISREQQSIZE (1 << 28)
#define RTL818X_TX_CONF_PROBE_DTS (1 << 29)
#define RTL818X_TX_CONF_HW_SEQNUM (1 << 30)
#define RTL818X_TX_CONF_CW_MIN (1 << 31)
__le32 RX_CONF;
#define RTL818X_RX_CONF_MONITOR (1 << 0)
#define RTL818X_RX_CONF_NICMAC (1 << 1)
#define RTL818X_RX_CONF_MULTICAST (1 << 2)
#define RTL818X_RX_CONF_BROADCAST (1 << 3)
#define RTL818X_RX_CONF_FCS (1 << 5)
#define RTL818X_RX_CONF_DATA (1 << 18)
#define RTL818X_RX_CONF_CTRL (1 << 19)
#define RTL818X_RX_CONF_MGMT (1 << 20)
#define RTL818X_RX_CONF_ADDR3 (1 << 21)
#define RTL818X_RX_CONF_PM (1 << 22)
#define RTL818X_RX_CONF_BSSID (1 << 23)
#define RTL818X_RX_CONF_RX_AUTORESETPHY (1 << 28)
#define RTL818X_RX_CONF_CSDM1 (1 << 29)
#define RTL818X_RX_CONF_CSDM2 (1 << 30)
#define RTL818X_RX_CONF_ONLYERLPKT (1 << 31)
__le32 INT_TIMEOUT;
__le32 TBDA;
u8 EEPROM_CMD;
#define RTL818X_EEPROM_CMD_READ (1 << 0)
#define RTL818X_EEPROM_CMD_WRITE (1 << 1)
#define RTL818X_EEPROM_CMD_CK (1 << 2)
#define RTL818X_EEPROM_CMD_CS (1 << 3)
#define RTL818X_EEPROM_CMD_NORMAL (0 << 6)
#define RTL818X_EEPROM_CMD_LOAD (1 << 6)
#define RTL818X_EEPROM_CMD_PROGRAM (2 << 6)
#define RTL818X_EEPROM_CMD_CONFIG (3 << 6)
u8 CONFIG0;
u8 CONFIG1;
u8 CONFIG2;
#define RTL818X_CONFIG2_ANTENNA_DIV (1 << 6)
__le32 ANAPARAM;
u8 MSR;
#define RTL818X_MSR_NO_LINK (0 << 2)
#define RTL818X_MSR_ADHOC (1 << 2)
#define RTL818X_MSR_INFRA (2 << 2)
#define RTL818X_MSR_MASTER (3 << 2)
#define RTL818X_MSR_ENEDCA (4 << 2)
u8 CONFIG3;
#define RTL818X_CONFIG3_ANAPARAM_WRITE (1 << 6)
#define RTL818X_CONFIG3_GNT_SELECT (1 << 7)
u8 CONFIG4;
#define RTL818X_CONFIG4_POWEROFF (1 << 6)
#define RTL818X_CONFIG4_VCOOFF (1 << 7)
u8 TESTR;
u8 reserved_9[2];
u8 PGSELECT;
u8 SECURITY;
__le32 ANAPARAM2;
u8 reserved_10[8];
__le32 IMR; /* 0x6c - Interrupt mask reg for 8187se */
#define IMR_TMGDOK ((1 << 30))
#define IMR_DOT11HINT ((1 << 25)) /* 802.11h Measurement Interrupt */
#define IMR_BCNDMAINT ((1 << 24)) /* Beacon DMA Interrupt */
#define IMR_WAKEINT ((1 << 23)) /* Wake Up Interrupt */
#define IMR_TXFOVW ((1 << 22)) /* Tx FIFO Overflow */
#define IMR_TIMEOUT1 ((1 << 21)) /* Time Out Interrupt 1 */
#define IMR_BCNINT ((1 << 20)) /* Beacon Time out */
#define IMR_ATIMINT ((1 << 19)) /* ATIM Time Out */
#define IMR_TBDER ((1 << 18)) /* Tx Beacon Descriptor Error */
#define IMR_TBDOK ((1 << 17)) /* Tx Beacon Descriptor OK */
#define IMR_THPDER ((1 << 16)) /* Tx High Priority Descriptor Error */
#define IMR_THPDOK ((1 << 15)) /* Tx High Priority Descriptor OK */
#define IMR_TVODER ((1 << 14)) /* Tx AC_VO Descriptor Error Int */
#define IMR_TVODOK ((1 << 13)) /* Tx AC_VO Descriptor OK Interrupt */
#define IMR_FOVW ((1 << 12)) /* Rx FIFO Overflow Interrupt */
#define IMR_RDU ((1 << 11)) /* Rx Descriptor Unavailable */
#define IMR_TVIDER ((1 << 10)) /* Tx AC_VI Descriptor Error */
#define IMR_TVIDOK ((1 << 9)) /* Tx AC_VI Descriptor OK Interrupt */
#define IMR_RER ((1 << 8)) /* Rx Error Interrupt */
#define IMR_ROK ((1 << 7)) /* Receive OK Interrupt */
#define IMR_TBEDER ((1 << 6)) /* Tx AC_BE Descriptor Error */
#define IMR_TBEDOK ((1 << 5)) /* Tx AC_BE Descriptor OK */
#define IMR_TBKDER ((1 << 4)) /* Tx AC_BK Descriptor Error */
#define IMR_TBKDOK ((1 << 3)) /* Tx AC_BK Descriptor OK */
#define IMR_RQOSOK ((1 << 2)) /* Rx QoS OK Interrupt */
#define IMR_TIMEOUT2 ((1 << 1)) /* Time Out Interrupt 2 */
#define IMR_TIMEOUT3 ((1 << 0)) /* Time Out Interrupt 3 */
__le16 BEACON_INTERVAL; /* 0x70 */
__le16 ATIM_WND; /* 0x72 */
__le16 BEACON_INTERVAL_TIME; /* 0x74 */
__le16 ATIMTR_INTERVAL; /* 0x76 */
u8 PHY_DELAY; /* 0x78 */
u8 CARRIER_SENSE_COUNTER; /* 0x79 */
u8 reserved_11[2]; /* 0x7a */
u8 PHY[4]; /* 0x7c */
__le16 RFPinsOutput; /* 0x80 */
__le16 RFPinsEnable; /* 0x82 */
__le16 RFPinsSelect; /* 0x84 */
__le16 RFPinsInput; /* 0x86 */
__le32 RF_PARA; /* 0x88 */
__le32 RF_TIMING; /* 0x8c */
u8 GP_ENABLE; /* 0x90 */
u8 GPIO0; /* 0x91 */
u8 GPIO1; /* 0x92 */
u8 TPPOLL_STOP; /* 0x93 - rtl8187se only */
#define RTL818x_TPPOLL_STOP_BQ (1 << 7)
#define RTL818x_TPPOLL_STOP_VI (1 << 4)
#define RTL818x_TPPOLL_STOP_VO (1 << 5)
#define RTL818x_TPPOLL_STOP_BE (1 << 3)
#define RTL818x_TPPOLL_STOP_BK (1 << 2)
#define RTL818x_TPPOLL_STOP_MG (1 << 1)
#define RTL818x_TPPOLL_STOP_HI (1 << 6)
__le32 HSSI_PARA; /* 0x94 */
u8 reserved_13[4]; /* 0x98 */
u8 TX_AGC_CTL; /* 0x9c */
#define RTL818X_TX_AGC_CTL_PERPACKET_GAIN (1 << 0)
#define RTL818X_TX_AGC_CTL_PERPACKET_ANTSEL (1 << 1)
#define RTL818X_TX_AGC_CTL_FEEDBACK_ANT (1 << 2)
u8 TX_GAIN_CCK;
u8 TX_GAIN_OFDM;
u8 TX_ANTENNA;
u8 reserved_14[16];
u8 WPA_CONF;
u8 reserved_15[3];
u8 SIFS;
u8 DIFS;
u8 SLOT;
u8 reserved_16[5];
u8 CW_CONF;
#define RTL818X_CW_CONF_PERPACKET_CW (1 << 0)
#define RTL818X_CW_CONF_PERPACKET_RETRY (1 << 1)
u8 CW_VAL;
u8 RATE_FALLBACK;
#define RTL818X_RATE_FALLBACK_ENABLE (1 << 7)
u8 ACM_CONTROL;
u8 reserved_17[24];
u8 CONFIG5;
u8 TX_DMA_POLLING;
u8 PHY_PR;
u8 reserved_18;
__le16 CWR;
u8 RETRY_CTR;
u8 reserved_19[3];
__le16 INT_MIG;
/* RTL818X_R8187B_*: magic numbers from ioregisters */
#define RTL818X_R8187B_B 0
#define RTL818X_R8187B_D 1
#define RTL818X_R8187B_E 2
__le32 RDSAR;
__le16 TID_AC_MAP;
u8 reserved_20[4];
union {
__le16 ANAPARAM3; /* 0xee */
u8 ANAPARAM3A; /* for rtl8187 */
};
#define AC_PARAM_TXOP_LIMIT_SHIFT 16
#define AC_PARAM_ECW_MAX_SHIFT 12
#define AC_PARAM_ECW_MIN_SHIFT 8
#define AC_PARAM_AIFS_SHIFT 0
__le32 AC_VO_PARAM; /* 0xf0 */
union { /* 0xf4 */
__le32 AC_VI_PARAM;
__le16 FEMR;
} __packed;
union{ /* 0xf8 */
__le32 AC_BE_PARAM; /* rtl8187se */
struct{
u8 reserved_21[2];
__le16 TALLY_CNT; /* 0xfa */
} __packed;
} __packed;
union {
u8 TALLY_SEL; /* 0xfc */
__le32 AC_BK_PARAM;
} __packed;
} __packed;
/* These are addresses with NON-standard usage.
* They have offsets very far from this struct.
* I don't like to introduce a ton of "reserved"..
* They are for RTL8187SE
*/
#define REG_ADDR1(addr) ((u8 __iomem *)priv->map + (addr))
#define REG_ADDR2(addr) ((__le16 __iomem *)priv->map + ((addr) >> 1))
#define REG_ADDR4(addr) ((__le32 __iomem *)priv->map + ((addr) >> 2))
#define FEMR_SE REG_ADDR2(0x1D4)
#define ARFR REG_ADDR2(0x1E0)
#define RFSW_CTRL REG_ADDR2(0x272)
#define SW_3W_DB0 REG_ADDR2(0x274)
#define SW_3W_DB0_4 REG_ADDR4(0x274)
#define SW_3W_DB1 REG_ADDR2(0x278)
#define SW_3W_DB1_4 REG_ADDR4(0x278)
#define SW_3W_CMD1 REG_ADDR1(0x27D)
#define PI_DATA_REG REG_ADDR2(0x360)
#define SI_DATA_REG REG_ADDR2(0x362)
struct rtl818x_rf_ops {
char *name;
void (*init)(struct ieee80211_hw *);
void (*stop)(struct ieee80211_hw *);
void (*set_chan)(struct ieee80211_hw *, struct ieee80211_conf *);
u8 (*calc_rssi)(u8 agc, u8 sq);
};
/**
* enum rtl818x_tx_desc_flags - Tx/Rx flags are common between RTL818X chips
*
* @RTL818X_TX_DESC_FLAG_NO_ENC: Disable hardware based encryption.
* @RTL818X_TX_DESC_FLAG_TX_OK: TX frame was ACKed.
* @RTL818X_TX_DESC_FLAG_SPLCP: Use short preamble.
* @RTL818X_TX_DESC_FLAG_MOREFRAG: More fragments follow.
* @RTL818X_TX_DESC_FLAG_CTS: Use CTS-to-self protection.
* @RTL818X_TX_DESC_FLAG_RTS: Use RTS/CTS protection.
* @RTL818X_TX_DESC_FLAG_LS: Last segment of the frame.
* @RTL818X_TX_DESC_FLAG_FS: First segment of the frame.
*/
enum rtl818x_tx_desc_flags {
RTL818X_TX_DESC_FLAG_NO_ENC = (1 << 15),
RTL818X_TX_DESC_FLAG_TX_OK = (1 << 15),
RTL818X_TX_DESC_FLAG_SPLCP = (1 << 16),
RTL818X_TX_DESC_FLAG_RX_UNDER = (1 << 16),
RTL818X_TX_DESC_FLAG_MOREFRAG = (1 << 17),
RTL818X_TX_DESC_FLAG_CTS = (1 << 18),
RTL818X_TX_DESC_FLAG_RTS = (1 << 23),
RTL818X_TX_DESC_FLAG_LS = (1 << 28),
RTL818X_TX_DESC_FLAG_FS = (1 << 29),
RTL818X_TX_DESC_FLAG_DMA = (1 << 30),
RTL818X_TX_DESC_FLAG_OWN = (1 << 31)
};
enum rtl818x_rx_desc_flags {
RTL818X_RX_DESC_FLAG_ICV_ERR = (1 << 12),
RTL818X_RX_DESC_FLAG_CRC32_ERR = (1 << 13),
RTL818X_RX_DESC_FLAG_PM = (1 << 14),
RTL818X_RX_DESC_FLAG_RX_ERR = (1 << 15),
RTL818X_RX_DESC_FLAG_BCAST = (1 << 16),
RTL818X_RX_DESC_FLAG_PAM = (1 << 17),
RTL818X_RX_DESC_FLAG_MCAST = (1 << 18),
RTL818X_RX_DESC_FLAG_QOS = (1 << 19), /* RTL8187(B) only */
RTL818X_RX_DESC_FLAG_TRSW = (1 << 24), /* RTL8187(B) only */
RTL818X_RX_DESC_FLAG_SPLCP = (1 << 25),
RTL818X_RX_DESC_FLAG_FOF = (1 << 26),
RTL818X_RX_DESC_FLAG_DMA_FAIL = (1 << 27),
RTL818X_RX_DESC_FLAG_LS = (1 << 28),
RTL818X_RX_DESC_FLAG_FS = (1 << 29),
RTL818X_RX_DESC_FLAG_EOR = (1 << 30),
RTL818X_RX_DESC_FLAG_OWN = (1 << 31)
};
#endif /* RTL818X_H */
View Git Blame Copy Permalink