renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-26 06:04:14 +08:00
Code
776a347df6
linux-next/drivers/media/usb/au0828/au0828.h
Mauro Carvalho Chehab f6fef86341 [media] au0828: reset streaming when a new frequency is set 
As reported by Trevor, doing several opening/streaming/closing
operations to the demux causes it to fail.

I was able to simulate this bug too. I also noticed that,
sometimes, changing channels with au0828, the same thing
happens.

Most of the issues seem to be due to some hardware bug, that
causes the device to not fill all the URBs allocated. When
the bug happens, the only known fix is to either replug the
device, or to send an USB reset to it.

There's also a hack a the au0828 driver that starts a thread
that tries to reset the device when a package doesn't start
with a sync.

One of the culpits for this bad hardware behavior seem to be
caused by the lack of stopping and restarting the stream every
time a new channel is set.

This patch warrants that the stream will be properly reset
every time the set_frontend callback is called, partially
solving the problem.

A complete fix, however, would also need to check the PM
conditions for the tuner and demux.

Reported-by: Trevor Graffa <tlgraffa@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-25 17:50:02 -03:00

322 lines
8.1 KiB
C
Raw Blame History

/*
* Driver for the Auvitek AU0828 USB bridge
*
* Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
*
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/usb.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
#include <media/tveeprom.h>
/* Analog */
#include <linux/videodev2.h>
#include <media/videobuf-vmalloc.h>
#include <media/v4l2-device.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-fh.h>
/* DVB */
#include "demux.h"
#include "dmxdev.h"
#include "dvb_demux.h"
#include "dvb_frontend.h"
#include "dvb_net.h"
#include "dvbdev.h"
#include "au0828-reg.h"
#include "au0828-cards.h"
#define DRIVER_NAME "au0828"
#define URB_COUNT 16
#define URB_BUFSIZE (0xe522)
/* Analog constants */
#define NTSC_STD_W 720
#define NTSC_STD_H 480
#define AU0828_INTERLACED_DEFAULT 1
#define V4L2_CID_PRIVATE_SHARPNESS (V4L2_CID_PRIVATE_BASE + 0)
/* Defination for AU0828 USB transfer */
#define AU0828_MAX_ISO_BUFS 12 /* maybe resize this value in the future */
#define AU0828_ISO_PACKETS_PER_URB 128
#define AU0828_MIN_BUF 4
#define AU0828_DEF_BUF 8
#define AU0828_MAX_INPUT 4
/* au0828 resource types (used for res_get/res_lock etc */
#define AU0828_RESOURCE_VIDEO 0x01
#define AU0828_RESOURCE_VBI 0x02
enum au0828_itype {
AU0828_VMUX_UNDEFINED = 0,
AU0828_VMUX_COMPOSITE,
AU0828_VMUX_SVIDEO,
AU0828_VMUX_CABLE,
AU0828_VMUX_TELEVISION,
AU0828_VMUX_DVB,
AU0828_VMUX_DEBUG
};
struct au0828_input {
enum au0828_itype type;
unsigned int vmux;
unsigned int amux;
void (*audio_setup) (void *priv, int enable);
};
struct au0828_board {
char *name;
unsigned int tuner_type;
unsigned char tuner_addr;
unsigned char i2c_clk_divider;
struct au0828_input input[AU0828_MAX_INPUT];
};
struct au0828_dvb {
struct mutex lock;
struct dvb_adapter adapter;
struct dvb_frontend *frontend;
struct dvb_demux demux;
struct dmxdev dmxdev;
struct dmx_frontend fe_hw;
struct dmx_frontend fe_mem;
struct dvb_net net;
int feeding;
int start_count;
int stop_count;
int (*set_frontend)(struct dvb_frontend *fe);
};
enum au0828_stream_state {
STREAM_OFF,
STREAM_INTERRUPT,
STREAM_ON
};
#define AUVI_INPUT(nr) (dev->board.input[nr])
/* device state */
enum au0828_dev_state {
DEV_INITIALIZED = 0x01,
DEV_DISCONNECTED = 0x02,
DEV_MISCONFIGURED = 0x04
};
struct au0828_fh {
/* must be the first field of this struct! */
struct v4l2_fh fh;
struct au0828_dev *dev;
unsigned int resources;
struct videobuf_queue vb_vidq;
struct videobuf_queue vb_vbiq;
enum v4l2_buf_type type;
};
struct au0828_usb_isoc_ctl {
/* max packet size of isoc transaction */
int max_pkt_size;
/* number of allocated urbs */
int num_bufs;
/* urb for isoc transfers */
struct urb **urb;
/* transfer buffers for isoc transfer */
char **transfer_buffer;
/* Last buffer command and region */
u8 cmd;
int pos, size, pktsize;
/* Last field: ODD or EVEN? */
int field;
/* Stores incomplete commands */
u32 tmp_buf;
int tmp_buf_len;
/* Stores already requested buffers */
struct au0828_buffer *buf;
struct au0828_buffer *vbi_buf;
/* Stores the number of received fields */
int nfields;
/* isoc urb callback */
int (*isoc_copy) (struct au0828_dev *dev, struct urb *urb);
};
/* buffer for one video frame */
struct au0828_buffer {
/* common v4l buffer stuff -- must be first */
struct videobuf_buffer vb;
struct list_head frame;
int top_field;
int receiving;
};
struct au0828_dmaqueue {
struct list_head active;
struct list_head queued;
wait_queue_head_t wq;
/* Counters to control buffer fill */
int pos;
};
struct au0828_dev {
struct mutex mutex;
struct usb_device *usbdev;
int boardnr;
struct au0828_board board;
u8 ctrlmsg[64];
/* I2C */
struct i2c_adapter i2c_adap;
struct i2c_algorithm i2c_algo;
struct i2c_client i2c_client;
u32 i2c_rc;
/* Digital */
struct au0828_dvb dvb;
struct work_struct restart_streaming;
#ifdef CONFIG_VIDEO_AU0828_V4L2
/* Analog */
struct v4l2_device v4l2_dev;
struct v4l2_ctrl_handler v4l2_ctrl_hdl;
#endif
int users;
unsigned int resources; /* resources in use */
struct video_device *vdev;
struct video_device *vbi_dev;
struct timer_list vid_timeout;
int vid_timeout_running;
struct timer_list vbi_timeout;
int vbi_timeout_running;
int width;
int height;
int vbi_width;
int vbi_height;
u32 vbi_read;
v4l2_std_id std;
u32 field_size;
u32 frame_size;
u32 bytesperline;
int type;
u8 ctrl_ainput;
__u8 isoc_in_endpointaddr;
u8 isoc_init_ok;
int greenscreen_detected;
unsigned int frame_count;
int ctrl_freq;
int input_type;
int std_set_in_tuner_core;
unsigned int ctrl_input;
enum au0828_dev_state dev_state;
enum au0828_stream_state stream_state;
wait_queue_head_t open;
struct mutex lock;
/* Isoc control struct */
struct au0828_dmaqueue vidq;
struct au0828_dmaqueue vbiq;
struct au0828_usb_isoc_ctl isoc_ctl;
spinlock_t slock;
/* usb transfer */
int alt; /* alternate */
int max_pkt_size; /* max packet size of isoc transaction */
int num_alt; /* Number of alternative settings */
unsigned int *alt_max_pkt_size; /* array of wMaxPacketSize */
struct urb *urb[AU0828_MAX_ISO_BUFS]; /* urb for isoc transfers */
char *transfer_buffer[AU0828_MAX_ISO_BUFS];/* transfer buffers for isoc
transfer */
/* USB / URB Related */
int urb_streaming;
struct urb *urbs[URB_COUNT];
/* Preallocated transfer digital transfer buffers */
char *dig_transfer_buffer[URB_COUNT];
};
/* ----------------------------------------------------------- */
#define au0828_read(dev, reg) au0828_readreg(dev, reg)
#define au0828_write(dev, reg, value) au0828_writereg(dev, reg, value)
#define au0828_andor(dev, reg, mask, value) \
au0828_writereg(dev, reg, \
(au0828_readreg(dev, reg) & ~(mask)) | ((value) & (mask)))
#define au0828_set(dev, reg, bit) au0828_andor(dev, (reg), (bit), (bit))
#define au0828_clear(dev, reg, bit) au0828_andor(dev, (reg), (bit), 0)
/* ----------------------------------------------------------- */
/* au0828-core.c */
extern u32 au0828_read(struct au0828_dev *dev, u16 reg);
extern u32 au0828_write(struct au0828_dev *dev, u16 reg, u32 val);
extern int au0828_debug;
/* ----------------------------------------------------------- */
/* au0828-cards.c */
extern struct au0828_board au0828_boards[];
extern struct usb_device_id au0828_usb_id_table[];
extern void au0828_gpio_setup(struct au0828_dev *dev);
extern int au0828_tuner_callback(void *priv, int component,
int command, int arg);
extern void au0828_card_setup(struct au0828_dev *dev);
/* ----------------------------------------------------------- */
/* au0828-i2c.c */
extern int au0828_i2c_register(struct au0828_dev *dev);
extern int au0828_i2c_unregister(struct au0828_dev *dev);
/* ----------------------------------------------------------- */
/* au0828-video.c */
int au0828_analog_register(struct au0828_dev *dev,
struct usb_interface *interface);
int au0828_analog_stream_disable(struct au0828_dev *d);
void au0828_analog_unregister(struct au0828_dev *dev);
/* ----------------------------------------------------------- */
/* au0828-dvb.c */
extern int au0828_dvb_register(struct au0828_dev *dev);
extern void au0828_dvb_unregister(struct au0828_dev *dev);
/* au0828-vbi.c */
extern struct videobuf_queue_ops au0828_vbi_qops;
#define dprintk(level, fmt, arg...)\
do { if (au0828_debug & level)\
printk(KERN_DEBUG DRIVER_NAME "/0: " fmt, ## arg);\
} while (0)
View Git Blame Copy Permalink