mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-22 12:14:01 +08:00
e3230494b5
The old logic always enabled the TX-delay when the phy-mode was set to PHY_INTERFACE_MODE_RGMII. There are dedicated phy-modes which tell the PHY driver to enable the RX and/or TX delays: - PHY_INTERFACE_MODE_RGMII should disable the RX and TX delay in the PHY (if required, the MAC should add the delays in this case) - PHY_INTERFACE_MODE_RGMII_ID should enable RX and TX delay in the PHY - PHY_INTERFACE_MODE_RGMII_TXID should enable the TX delay in the PHY - PHY_INTERFACE_MODE_RGMII_RXID should enable the RX delay in the PHY (currently not supported by RTL8211F) With this patch we enable the TX delay for PHY_INTERFACE_MODE_RGMII_ID and PHY_INTERFACE_MODE_RGMII_TXID. Additionally we now explicity disable the TX-delay, which seems to be enabled automatically after a hard-reset of the PHY (by triggering it's reset pin) to get a consistent state (as defined by the phy-mode). This fixes a compatibility problem with some SoCs where the TX-delay was also added by the MAC. With the TX-delay being applied twice the TX clock was off and TX traffic was broken or very slow (<10Mbit/s) on 1000Mbit/s links. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
192 lines
4.7 KiB
C
192 lines
4.7 KiB
C
/*
|
|
* drivers/net/phy/realtek.c
|
|
*
|
|
* Driver for Realtek PHYs
|
|
*
|
|
* Author: Johnson Leung <r58129@freescale.com>
|
|
*
|
|
* Copyright (c) 2004 Freescale Semiconductor, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
#include <linux/phy.h>
|
|
#include <linux/module.h>
|
|
|
|
#define RTL821x_PHYSR 0x11
|
|
#define RTL821x_PHYSR_DUPLEX 0x2000
|
|
#define RTL821x_PHYSR_SPEED 0xc000
|
|
#define RTL821x_INER 0x12
|
|
#define RTL821x_INER_INIT 0x6400
|
|
#define RTL821x_INSR 0x13
|
|
#define RTL8211E_INER_LINK_STATUS 0x400
|
|
|
|
#define RTL8211F_INER_LINK_STATUS 0x0010
|
|
#define RTL8211F_INSR 0x1d
|
|
#define RTL8211F_PAGE_SELECT 0x1f
|
|
#define RTL8211F_TX_DELAY 0x100
|
|
|
|
MODULE_DESCRIPTION("Realtek PHY driver");
|
|
MODULE_AUTHOR("Johnson Leung");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static int rtl821x_ack_interrupt(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
|
|
err = phy_read(phydev, RTL821x_INSR);
|
|
|
|
return (err < 0) ? err : 0;
|
|
}
|
|
|
|
static int rtl8211f_ack_interrupt(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
|
|
phy_write(phydev, RTL8211F_PAGE_SELECT, 0xa43);
|
|
err = phy_read(phydev, RTL8211F_INSR);
|
|
/* restore to default page 0 */
|
|
phy_write(phydev, RTL8211F_PAGE_SELECT, 0x0);
|
|
|
|
return (err < 0) ? err : 0;
|
|
}
|
|
|
|
static int rtl8211b_config_intr(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
|
|
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
|
|
err = phy_write(phydev, RTL821x_INER,
|
|
RTL821x_INER_INIT);
|
|
else
|
|
err = phy_write(phydev, RTL821x_INER, 0);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int rtl8211e_config_intr(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
|
|
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
|
|
err = phy_write(phydev, RTL821x_INER,
|
|
RTL8211E_INER_LINK_STATUS);
|
|
else
|
|
err = phy_write(phydev, RTL821x_INER, 0);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int rtl8211f_config_intr(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
|
|
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
|
|
err = phy_write(phydev, RTL821x_INER,
|
|
RTL8211F_INER_LINK_STATUS);
|
|
else
|
|
err = phy_write(phydev, RTL821x_INER, 0);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int rtl8211f_config_init(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
u16 reg;
|
|
|
|
ret = genphy_config_init(phydev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
phy_write(phydev, RTL8211F_PAGE_SELECT, 0xd08);
|
|
reg = phy_read(phydev, 0x11);
|
|
|
|
/* enable TX-delay for rgmii-id and rgmii-txid, otherwise disable it */
|
|
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
|
|
phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
|
|
reg |= RTL8211F_TX_DELAY;
|
|
else
|
|
reg &= ~RTL8211F_TX_DELAY;
|
|
|
|
phy_write(phydev, 0x11, reg);
|
|
/* restore to default page 0 */
|
|
phy_write(phydev, RTL8211F_PAGE_SELECT, 0x0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct phy_driver realtek_drvs[] = {
|
|
{
|
|
.phy_id = 0x00008201,
|
|
.name = "RTL8201CP Ethernet",
|
|
.phy_id_mask = 0x0000ffff,
|
|
.features = PHY_BASIC_FEATURES,
|
|
.flags = PHY_HAS_INTERRUPT,
|
|
.config_aneg = &genphy_config_aneg,
|
|
.read_status = &genphy_read_status,
|
|
}, {
|
|
.phy_id = 0x001cc912,
|
|
.name = "RTL8211B Gigabit Ethernet",
|
|
.phy_id_mask = 0x001fffff,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.flags = PHY_HAS_INTERRUPT,
|
|
.config_aneg = &genphy_config_aneg,
|
|
.read_status = &genphy_read_status,
|
|
.ack_interrupt = &rtl821x_ack_interrupt,
|
|
.config_intr = &rtl8211b_config_intr,
|
|
}, {
|
|
.phy_id = 0x001cc914,
|
|
.name = "RTL8211DN Gigabit Ethernet",
|
|
.phy_id_mask = 0x001fffff,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.flags = PHY_HAS_INTERRUPT,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.ack_interrupt = rtl821x_ack_interrupt,
|
|
.config_intr = rtl8211e_config_intr,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
}, {
|
|
.phy_id = 0x001cc915,
|
|
.name = "RTL8211E Gigabit Ethernet",
|
|
.phy_id_mask = 0x001fffff,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.flags = PHY_HAS_INTERRUPT,
|
|
.config_aneg = &genphy_config_aneg,
|
|
.read_status = &genphy_read_status,
|
|
.ack_interrupt = &rtl821x_ack_interrupt,
|
|
.config_intr = &rtl8211e_config_intr,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
}, {
|
|
.phy_id = 0x001cc916,
|
|
.name = "RTL8211F Gigabit Ethernet",
|
|
.phy_id_mask = 0x001fffff,
|
|
.features = PHY_GBIT_FEATURES,
|
|
.flags = PHY_HAS_INTERRUPT,
|
|
.config_aneg = &genphy_config_aneg,
|
|
.config_init = &rtl8211f_config_init,
|
|
.read_status = &genphy_read_status,
|
|
.ack_interrupt = &rtl8211f_ack_interrupt,
|
|
.config_intr = &rtl8211f_config_intr,
|
|
.suspend = genphy_suspend,
|
|
.resume = genphy_resume,
|
|
},
|
|
};
|
|
|
|
module_phy_driver(realtek_drvs);
|
|
|
|
static struct mdio_device_id __maybe_unused realtek_tbl[] = {
|
|
{ 0x001cc912, 0x001fffff },
|
|
{ 0x001cc914, 0x001fffff },
|
|
{ 0x001cc915, 0x001fffff },
|
|
{ 0x001cc916, 0x001fffff },
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(mdio, realtek_tbl);
|