renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 06:34:11 +08:00
Code
75e2ea643f
linux-next/arch/arm/mach-davinci/board-da850-evm.c
Chaithrika U S 75e2ea643f davinci: DA850/OMAP-L138 EVM expander setup and UI card detection 
DA850/OMAP-L138 EVM can be connected to an UI card which has various
peripherals on it.The UI card has TCA6416 expander which can be probed
to check whether the UI card is connected or not. If the UI card is
connected, setup NOR and NAND devices. This is done via the expander
setup callback.

Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-11-25 10:21:30 -08:00

661 lines
15 KiB
C
Raw Blame History

/*
* TI DA850/OMAP-L138 EVM board
*
* Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
*
* Derived from: arch/arm/mach-davinci/board-da830-evm.c
* Original Copyrights follow:
*
* 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/console.h>
#include <linux/i2c.h>
#include <linux/i2c/at24.h>
#include <linux/i2c/pca953x.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/regulator/machine.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/cp_intc.h>
#include <mach/da8xx.h>
#include <mach/nand.h>
#include <mach/mux.h>
#define DA850_EVM_PHY_MASK 0x1
#define DA850_EVM_MDIO_FREQUENCY 2200000 /* PHY bus frequency */
#define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8)
#define DA850_LCD_BL_PIN GPIO_TO_PIN(2, 15)
#define DA850_MMCSD_CD_PIN GPIO_TO_PIN(4, 0)
#define DA850_MMCSD_WP_PIN GPIO_TO_PIN(4, 1)
static struct mtd_partition da850_evm_norflash_partition[] = {
{
.name = "NOR filesystem",
.offset = 0,
.size = MTDPART_SIZ_FULL,
.mask_flags = 0,
},
};
static struct physmap_flash_data da850_evm_norflash_data = {
.width = 2,
.parts = da850_evm_norflash_partition,
.nr_parts = ARRAY_SIZE(da850_evm_norflash_partition),
};
static struct resource da850_evm_norflash_resource[] = {
{
.start = DA8XX_AEMIF_CS2_BASE,
.end = DA8XX_AEMIF_CS2_BASE + SZ_32M - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device da850_evm_norflash_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &da850_evm_norflash_data,
},
.num_resources = 1,
.resource = da850_evm_norflash_resource,
};
/* DA850/OMAP-L138 EVM includes a 512 MByte large-page NAND flash
* (128K blocks). It may be used instead of the (default) SPI flash
* to boot, using TI's tools to install the secondary boot loader
* (UBL) and U-Boot.
*/
struct mtd_partition da850_evm_nandflash_partition[] = {
{
.name = "u-boot env",
.offset = 0,
.size = SZ_128K,
.mask_flags = MTD_WRITEABLE,
},
{
.name = "UBL",
.offset = MTDPART_OFS_APPEND,
.size = SZ_128K,
.mask_flags = MTD_WRITEABLE,
},
{
.name = "u-boot",
.offset = MTDPART_OFS_APPEND,
.size = 4 * SZ_128K,
.mask_flags = MTD_WRITEABLE,
},
{
.name = "kernel",
.offset = 0x200000,
.size = SZ_2M,
.mask_flags = 0,
},
{
.name = "filesystem",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL,
.mask_flags = 0,
},
};
static struct davinci_nand_pdata da850_evm_nandflash_data = {
.parts = da850_evm_nandflash_partition,
.nr_parts = ARRAY_SIZE(da850_evm_nandflash_partition),
.ecc_mode = NAND_ECC_HW,
.options = NAND_USE_FLASH_BBT,
};
static struct resource da850_evm_nandflash_resource[] = {
{
.start = DA8XX_AEMIF_CS3_BASE,
.end = DA8XX_AEMIF_CS3_BASE + SZ_512K + 2 * SZ_1K - 1,
.flags = IORESOURCE_MEM,
},
{
.start = DA8XX_AEMIF_CTL_BASE,
.end = DA8XX_AEMIF_CTL_BASE + SZ_32K - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device da850_evm_nandflash_device = {
.name = "davinci_nand",
.id = 1,
.dev = {
.platform_data = &da850_evm_nandflash_data,
},
.num_resources = ARRAY_SIZE(da850_evm_nandflash_resource),
.resource = da850_evm_nandflash_resource,
};
static u32 ui_card_detected;
static void da850_evm_setup_nor_nand(void);
static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio,
unsigned ngpio, void *c)
{
int sel_a, sel_b, sel_c, ret;
sel_a = gpio + 7;
sel_b = gpio + 6;
sel_c = gpio + 5;
ret = gpio_request(sel_a, "sel_a");
if (ret) {
pr_warning("Cannot open UI expander pin %d\n", sel_a);
goto exp_setup_sela_fail;
}
ret = gpio_request(sel_b, "sel_b");
if (ret) {
pr_warning("Cannot open UI expander pin %d\n", sel_b);
goto exp_setup_selb_fail;
}
ret = gpio_request(sel_c, "sel_c");
if (ret) {
pr_warning("Cannot open UI expander pin %d\n", sel_c);
goto exp_setup_selc_fail;
}
/* deselect all functionalities */
gpio_direction_output(sel_a, 1);
gpio_direction_output(sel_b, 1);
gpio_direction_output(sel_c, 1);
ui_card_detected = 1;
pr_info("DA850/OMAP-L138 EVM UI card detected\n");
da850_evm_setup_nor_nand();
return 0;
exp_setup_selc_fail:
gpio_free(sel_b);
exp_setup_selb_fail:
gpio_free(sel_a);
exp_setup_sela_fail:
return ret;
}
static int da850_evm_ui_expander_teardown(struct i2c_client *client,
unsigned gpio, unsigned ngpio, void *c)
{
/* deselect all functionalities */
gpio_set_value(gpio + 5, 1);
gpio_set_value(gpio + 6, 1);
gpio_set_value(gpio + 7, 1);
gpio_free(gpio + 5);
gpio_free(gpio + 6);
gpio_free(gpio + 7);
return 0;
}
static struct pca953x_platform_data da850_evm_ui_expander_info = {
.gpio_base = DAVINCI_N_GPIO,
.setup = da850_evm_ui_expander_setup,
.teardown = da850_evm_ui_expander_teardown,
};
static struct i2c_board_info __initdata da850_evm_i2c_devices[] = {
{
I2C_BOARD_INFO("tlv320aic3x", 0x18),
},
{
I2C_BOARD_INFO("tca6416", 0x20),
.platform_data = &da850_evm_ui_expander_info,
},
};
static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
.bus_freq = 100, /* kHz */
.bus_delay = 0, /* usec */
};
static struct davinci_uart_config da850_evm_uart_config __initdata = {
.enabled_uarts = 0x7,
};
static struct platform_device *da850_evm_devices[] __initdata = {
&da850_evm_nandflash_device,
&da850_evm_norflash_device,
};
/* davinci da850 evm audio machine driver */
static u8 da850_iis_serializer_direction[] = {
INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE,
INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE,
INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE, TX_MODE,
RX_MODE, INACTIVE_MODE, INACTIVE_MODE, INACTIVE_MODE,
};
static struct snd_platform_data da850_evm_snd_data = {
.tx_dma_offset = 0x2000,
.rx_dma_offset = 0x2000,
.op_mode = DAVINCI_MCASP_IIS_MODE,
.num_serializer = ARRAY_SIZE(da850_iis_serializer_direction),
.tdm_slots = 2,
.serial_dir = da850_iis_serializer_direction,
.eventq_no = EVENTQ_1,
.version = MCASP_VERSION_2,
.txnumevt = 1,
.rxnumevt = 1,
};
static int da850_evm_mmc_get_ro(int index)
{
return gpio_get_value(DA850_MMCSD_WP_PIN);
}
static int da850_evm_mmc_get_cd(int index)
{
return !gpio_get_value(DA850_MMCSD_CD_PIN);
}
static struct davinci_mmc_config da850_mmc_config = {
.get_ro = da850_evm_mmc_get_ro,
.get_cd = da850_evm_mmc_get_cd,
.wires = 4,
.version = MMC_CTLR_VERSION_2,
};
static int da850_lcd_hw_init(void)
{
int status;
status = gpio_request(DA850_LCD_BL_PIN, "lcd bl\n");
if (status < 0)
return status;
status = gpio_request(DA850_LCD_PWR_PIN, "lcd pwr\n");
if (status < 0) {
gpio_free(DA850_LCD_BL_PIN);
return status;
}
gpio_direction_output(DA850_LCD_BL_PIN, 0);
gpio_direction_output(DA850_LCD_PWR_PIN, 0);
/* disable lcd backlight */
gpio_set_value(DA850_LCD_BL_PIN, 0);
/* disable lcd power */
gpio_set_value(DA850_LCD_PWR_PIN, 0);
/* enable lcd power */
gpio_set_value(DA850_LCD_PWR_PIN, 1);
/* enable lcd backlight */
gpio_set_value(DA850_LCD_BL_PIN, 1);
return 0;
}
#define DA8XX_AEMIF_CE2CFG_OFFSET 0x10
#define DA8XX_AEMIF_ASIZE_16BIT 0x1
static void __init da850_evm_init_nor(void)
{
void __iomem *aemif_addr;
aemif_addr = ioremap(DA8XX_AEMIF_CTL_BASE, SZ_32K);
/* Configure data bus width of CS2 to 16 bit */
writel(readl(aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET) |
DA8XX_AEMIF_ASIZE_16BIT,
aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET);
iounmap(aemif_addr);
}
/* TPS65070 voltage regulator support */
/* 3.3V */
struct regulator_consumer_supply tps65070_dcdc1_consumers[] = {
{
.supply = "usb0_vdda33",
},
{
.supply = "usb1_vdda33",
},
};
/* 3.3V or 1.8V */
struct regulator_consumer_supply tps65070_dcdc2_consumers[] = {
{
.supply = "dvdd3318_a",
},
{
.supply = "dvdd3318_b",
},
{
.supply = "dvdd3318_c",
},
};
/* 1.2V */
struct regulator_consumer_supply tps65070_dcdc3_consumers[] = {
{
.supply = "cvdd",
},
};
/* 1.8V LDO */
struct regulator_consumer_supply tps65070_ldo1_consumers[] = {
{
.supply = "sata_vddr",
},
{
.supply = "usb0_vdda18",
},
{
.supply = "usb1_vdda18",
},
{
.supply = "ddr_dvdd18",
},
};
/* 1.2V LDO */
struct regulator_consumer_supply tps65070_ldo2_consumers[] = {
{
.supply = "sata_vdd",
},
{
.supply = "pll0_vdda",
},
{
.supply = "pll1_vdda",
},
{
.supply = "usbs_cvdd",
},
{
.supply = "vddarnwa1",
},
};
struct regulator_init_data tps65070_regulator_data[] = {
/* dcdc1 */
{
.constraints = {
.min_uV = 3150000,
.max_uV = 3450000,
.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS),
.boot_on = 1,
},
.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc1_consumers),
.consumer_supplies = tps65070_dcdc1_consumers,
},
/* dcdc2 */
{
.constraints = {
.min_uV = 1710000,
.max_uV = 3450000,
.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS),
.boot_on = 1,
},
.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc2_consumers),
.consumer_supplies = tps65070_dcdc2_consumers,
},
/* dcdc3 */
{
.constraints = {
.min_uV = 950000,
.max_uV = 1320000,
.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS),
.boot_on = 1,
},
.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc3_consumers),
.consumer_supplies = tps65070_dcdc3_consumers,
},
/* ldo1 */
{
.constraints = {
.min_uV = 1710000,
.max_uV = 1890000,
.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS),
.boot_on = 1,
},
.num_consumer_supplies = ARRAY_SIZE(tps65070_ldo1_consumers),
.consumer_supplies = tps65070_ldo1_consumers,
},
/* ldo2 */
{
.constraints = {
.min_uV = 1140000,
.max_uV = 1320000,
.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
REGULATOR_CHANGE_STATUS),
.boot_on = 1,
},
.num_consumer_supplies = ARRAY_SIZE(tps65070_ldo2_consumers),
.consumer_supplies = tps65070_ldo2_consumers,
},
};
static struct i2c_board_info __initdata da850evm_tps65070_info[] = {
{
I2C_BOARD_INFO("tps6507x", 0x48),
.platform_data = &tps65070_regulator_data[0],
},
};
static int __init pmic_tps65070_init(void)
{
return i2c_register_board_info(1, da850evm_tps65070_info,
ARRAY_SIZE(da850evm_tps65070_info));
}
#if defined(CONFIG_MMC_DAVINCI) || \
defined(CONFIG_MMC_DAVINCI_MODULE)
#define HAS_MMC 1
#else
#define HAS_MMC 0
#endif
static void da850_evm_setup_nor_nand(void)
{
int ret = 0;
if (ui_card_detected & !HAS_MMC) {
ret = da8xx_pinmux_setup(da850_nand_pins);
if (ret)
pr_warning("da850_evm_init: nand mux setup failed: "
"%d\n", ret);
ret = da8xx_pinmux_setup(da850_nor_pins);
if (ret)
pr_warning("da850_evm_init: nor mux setup failed: %d\n",
ret);
da850_evm_init_nor();
platform_add_devices(da850_evm_devices,
ARRAY_SIZE(da850_evm_devices));
}
}
static const short da850_evm_lcdc_pins[] = {
DA850_GPIO2_8, DA850_GPIO2_15,
-1
};
static __init void da850_evm_init(void)
{
struct davinci_soc_info *soc_info = &davinci_soc_info;
int ret;
ret = pmic_tps65070_init();
if (ret)
pr_warning("da850_evm_init: TPS65070 PMIC init failed: %d\n",
ret);
ret = da8xx_register_edma();
if (ret)
pr_warning("da850_evm_init: edma registration failed: %d\n",
ret);
ret = da8xx_pinmux_setup(da850_i2c0_pins);
if (ret)
pr_warning("da850_evm_init: i2c0 mux setup failed: %d\n",
ret);
ret = da8xx_register_i2c(0, &da850_evm_i2c_0_pdata);
if (ret)
pr_warning("da850_evm_init: i2c0 registration failed: %d\n",
ret);
soc_info->emac_pdata->phy_mask = DA850_EVM_PHY_MASK;
soc_info->emac_pdata->mdio_max_freq = DA850_EVM_MDIO_FREQUENCY;
soc_info->emac_pdata->rmii_en = 0;
ret = da8xx_pinmux_setup(da850_cpgmac_pins);
if (ret)
pr_warning("da850_evm_init: cpgmac mux setup failed: %d\n",
ret);
ret = da8xx_register_emac();
if (ret)
pr_warning("da850_evm_init: emac registration failed: %d\n",
ret);
ret = da8xx_register_watchdog();
if (ret)
pr_warning("da830_evm_init: watchdog registration failed: %d\n",
ret);
if (HAS_MMC) {
ret = da8xx_pinmux_setup(da850_mmcsd0_pins);
if (ret)
pr_warning("da850_evm_init: mmcsd0 mux setup failed:"
" %d\n", ret);
ret = gpio_request(DA850_MMCSD_CD_PIN, "MMC CD\n");
if (ret)
pr_warning("da850_evm_init: can not open GPIO %d\n",
DA850_MMCSD_CD_PIN);
gpio_direction_input(DA850_MMCSD_CD_PIN);
ret = gpio_request(DA850_MMCSD_WP_PIN, "MMC WP\n");
if (ret)
pr_warning("da850_evm_init: can not open GPIO %d\n",
DA850_MMCSD_WP_PIN);
gpio_direction_input(DA850_MMCSD_WP_PIN);
ret = da8xx_register_mmcsd0(&da850_mmc_config);
if (ret)
pr_warning("da850_evm_init: mmcsd0 registration failed:"
" %d\n", ret);
}
davinci_serial_init(&da850_evm_uart_config);
i2c_register_board_info(1, da850_evm_i2c_devices,
ARRAY_SIZE(da850_evm_i2c_devices));
/*
* shut down uart 0 and 1; they are not used on the board and
* accessing them causes endless "too much work in irq53" messages
* with arago fs
*/
__raw_writel(0, IO_ADDRESS(DA8XX_UART1_BASE) + 0x30);
__raw_writel(0, IO_ADDRESS(DA8XX_UART0_BASE) + 0x30);
ret = da8xx_pinmux_setup(da850_mcasp_pins);
if (ret)
pr_warning("da850_evm_init: mcasp mux setup failed: %d\n",
ret);
da8xx_register_mcasp(0, &da850_evm_snd_data);
ret = da8xx_pinmux_setup(da850_lcdcntl_pins);
if (ret)
pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n",
ret);
/* Handle board specific muxing for LCD here */
ret = da8xx_pinmux_setup(da850_evm_lcdc_pins);
if (ret)
pr_warning("da850_evm_init: evm specific lcd mux setup "
"failed: %d\n", ret);
ret = da850_lcd_hw_init();
if (ret)
pr_warning("da850_evm_init: lcd initialization failed: %d\n",
ret);
ret = da8xx_register_lcdc(&sharp_lk043t1dg01_pdata);
if (ret)
pr_warning("da850_evm_init: lcdc registration failed: %d\n",
ret);
ret = da8xx_register_rtc();
if (ret)
pr_warning("da850_evm_init: rtc setup failed: %d\n", ret);
ret = da850_register_cpufreq();
if (ret)
pr_warning("da850_evm_init: cpufreq registration failed: %d\n",
ret);
}
#ifdef CONFIG_SERIAL_8250_CONSOLE
static int __init da850_evm_console_init(void)
{
return add_preferred_console("ttyS", 2, "115200");
}
console_initcall(da850_evm_console_init);
#endif
static __init void da850_evm_irq_init(void)
{
struct davinci_soc_info *soc_info = &davinci_soc_info;
cp_intc_init((void __iomem *)DA8XX_CP_INTC_VIRT, DA850_N_CP_INTC_IRQ,
soc_info->intc_irq_prios);
}
static void __init da850_evm_map_io(void)
{
da850_init();
}
MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138 EVM")
.phys_io = IO_PHYS,
.io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
.boot_params = (DA8XX_DDR_BASE + 0x100),
.map_io = da850_evm_map_io,
.init_irq = da850_evm_irq_init,
.timer = &davinci_timer,
.init_machine = da850_evm_init,
MACHINE_END
View Git Blame Copy Permalink