mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-22 20:23:57 +08:00
07b240411f
The exynos code claimed the write protect with devm_gpio_request() but never did anything with it. That meant that anyone using a write protect GPIO would effectively be write protected all the time. The handling for wp-gpios belongs in the main dw_mmc driver and has been moved there. Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Chris Ball <cjb@laptop.org>
244 lines
6.6 KiB
C
244 lines
6.6 KiB
C
/*
|
|
* Exynos Specific Extensions for Synopsys DW Multimedia Card Interface driver
|
|
*
|
|
* Copyright (C) 2012, Samsung Electronics Co., Ltd.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/mmc/dw_mmc.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_gpio.h>
|
|
|
|
#include "dw_mmc.h"
|
|
#include "dw_mmc-pltfm.h"
|
|
|
|
#define NUM_PINS(x) (x + 2)
|
|
|
|
#define SDMMC_CLKSEL 0x09C
|
|
#define SDMMC_CLKSEL_CCLK_SAMPLE(x) (((x) & 7) << 0)
|
|
#define SDMMC_CLKSEL_CCLK_DRIVE(x) (((x) & 7) << 16)
|
|
#define SDMMC_CLKSEL_CCLK_DIVIDER(x) (((x) & 7) << 24)
|
|
#define SDMMC_CLKSEL_GET_DRV_WD3(x) (((x) >> 16) & 0x7)
|
|
#define SDMMC_CLKSEL_TIMING(x, y, z) (SDMMC_CLKSEL_CCLK_SAMPLE(x) | \
|
|
SDMMC_CLKSEL_CCLK_DRIVE(y) | \
|
|
SDMMC_CLKSEL_CCLK_DIVIDER(z))
|
|
|
|
#define SDMMC_CMD_USE_HOLD_REG BIT(29)
|
|
|
|
#define EXYNOS4210_FIXED_CIU_CLK_DIV 2
|
|
#define EXYNOS4412_FIXED_CIU_CLK_DIV 4
|
|
|
|
/* Variations in Exynos specific dw-mshc controller */
|
|
enum dw_mci_exynos_type {
|
|
DW_MCI_TYPE_EXYNOS4210,
|
|
DW_MCI_TYPE_EXYNOS4412,
|
|
DW_MCI_TYPE_EXYNOS5250,
|
|
};
|
|
|
|
/* Exynos implementation specific driver private data */
|
|
struct dw_mci_exynos_priv_data {
|
|
enum dw_mci_exynos_type ctrl_type;
|
|
u8 ciu_div;
|
|
u32 sdr_timing;
|
|
u32 ddr_timing;
|
|
};
|
|
|
|
static struct dw_mci_exynos_compatible {
|
|
char *compatible;
|
|
enum dw_mci_exynos_type ctrl_type;
|
|
} exynos_compat[] = {
|
|
{
|
|
.compatible = "samsung,exynos4210-dw-mshc",
|
|
.ctrl_type = DW_MCI_TYPE_EXYNOS4210,
|
|
}, {
|
|
.compatible = "samsung,exynos4412-dw-mshc",
|
|
.ctrl_type = DW_MCI_TYPE_EXYNOS4412,
|
|
}, {
|
|
.compatible = "samsung,exynos5250-dw-mshc",
|
|
.ctrl_type = DW_MCI_TYPE_EXYNOS5250,
|
|
},
|
|
};
|
|
|
|
static int dw_mci_exynos_priv_init(struct dw_mci *host)
|
|
{
|
|
struct dw_mci_exynos_priv_data *priv;
|
|
int idx;
|
|
|
|
priv = devm_kzalloc(host->dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv) {
|
|
dev_err(host->dev, "mem alloc failed for private data\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
for (idx = 0; idx < ARRAY_SIZE(exynos_compat); idx++) {
|
|
if (of_device_is_compatible(host->dev->of_node,
|
|
exynos_compat[idx].compatible))
|
|
priv->ctrl_type = exynos_compat[idx].ctrl_type;
|
|
}
|
|
|
|
host->priv = priv;
|
|
return 0;
|
|
}
|
|
|
|
static int dw_mci_exynos_setup_clock(struct dw_mci *host)
|
|
{
|
|
struct dw_mci_exynos_priv_data *priv = host->priv;
|
|
|
|
if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS5250)
|
|
host->bus_hz /= (priv->ciu_div + 1);
|
|
else if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS4412)
|
|
host->bus_hz /= EXYNOS4412_FIXED_CIU_CLK_DIV;
|
|
else if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS4210)
|
|
host->bus_hz /= EXYNOS4210_FIXED_CIU_CLK_DIV;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dw_mci_exynos_prepare_command(struct dw_mci *host, u32 *cmdr)
|
|
{
|
|
/*
|
|
* Exynos4412 and Exynos5250 extends the use of CMD register with the
|
|
* use of bit 29 (which is reserved on standard MSHC controllers) for
|
|
* optionally bypassing the HOLD register for command and data. The
|
|
* HOLD register should be bypassed in case there is no phase shift
|
|
* applied on CMD/DATA that is sent to the card.
|
|
*/
|
|
if (SDMMC_CLKSEL_GET_DRV_WD3(mci_readl(host, CLKSEL)))
|
|
*cmdr |= SDMMC_CMD_USE_HOLD_REG;
|
|
}
|
|
|
|
static void dw_mci_exynos_set_ios(struct dw_mci *host, struct mmc_ios *ios)
|
|
{
|
|
struct dw_mci_exynos_priv_data *priv = host->priv;
|
|
|
|
if (ios->timing == MMC_TIMING_UHS_DDR50)
|
|
mci_writel(host, CLKSEL, priv->ddr_timing);
|
|
else
|
|
mci_writel(host, CLKSEL, priv->sdr_timing);
|
|
}
|
|
|
|
static int dw_mci_exynos_parse_dt(struct dw_mci *host)
|
|
{
|
|
struct dw_mci_exynos_priv_data *priv = host->priv;
|
|
struct device_node *np = host->dev->of_node;
|
|
u32 timing[2];
|
|
u32 div = 0;
|
|
int ret;
|
|
|
|
of_property_read_u32(np, "samsung,dw-mshc-ciu-div", &div);
|
|
priv->ciu_div = div;
|
|
|
|
ret = of_property_read_u32_array(np,
|
|
"samsung,dw-mshc-sdr-timing", timing, 2);
|
|
if (ret)
|
|
return ret;
|
|
|
|
priv->sdr_timing = SDMMC_CLKSEL_TIMING(timing[0], timing[1], div);
|
|
|
|
ret = of_property_read_u32_array(np,
|
|
"samsung,dw-mshc-ddr-timing", timing, 2);
|
|
if (ret)
|
|
return ret;
|
|
|
|
priv->ddr_timing = SDMMC_CLKSEL_TIMING(timing[0], timing[1], div);
|
|
return 0;
|
|
}
|
|
|
|
static int dw_mci_exynos_setup_bus(struct dw_mci *host,
|
|
struct device_node *slot_np, u8 bus_width)
|
|
{
|
|
int idx, gpio, ret;
|
|
|
|
if (!slot_np)
|
|
return -EINVAL;
|
|
|
|
/* cmd + clock + bus-width pins */
|
|
for (idx = 0; idx < NUM_PINS(bus_width); idx++) {
|
|
gpio = of_get_gpio(slot_np, idx);
|
|
if (!gpio_is_valid(gpio)) {
|
|
dev_err(host->dev, "invalid gpio: %d\n", gpio);
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = devm_gpio_request(host->dev, gpio, "dw-mci-bus");
|
|
if (ret) {
|
|
dev_err(host->dev, "gpio [%d] request failed\n", gpio);
|
|
return -EBUSY;
|
|
}
|
|
}
|
|
|
|
if (host->pdata->quirks & DW_MCI_QUIRK_BROKEN_CARD_DETECTION)
|
|
return 0;
|
|
|
|
gpio = of_get_named_gpio(slot_np, "samsung,cd-pinmux-gpio", 0);
|
|
if (gpio_is_valid(gpio)) {
|
|
if (devm_gpio_request(host->dev, gpio, "dw-mci-cd"))
|
|
dev_err(host->dev, "gpio [%d] request failed\n", gpio);
|
|
} else {
|
|
dev_info(host->dev, "cd gpio not available");
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Exynos5250 controller specific capabilities */
|
|
static unsigned long exynos5250_dwmmc_caps[4] = {
|
|
MMC_CAP_UHS_DDR50 | MMC_CAP_1_8V_DDR |
|
|
MMC_CAP_8_BIT_DATA | MMC_CAP_CMD23,
|
|
MMC_CAP_CMD23,
|
|
MMC_CAP_CMD23,
|
|
MMC_CAP_CMD23,
|
|
};
|
|
|
|
static const struct dw_mci_drv_data exynos5250_drv_data = {
|
|
.caps = exynos5250_dwmmc_caps,
|
|
.init = dw_mci_exynos_priv_init,
|
|
.setup_clock = dw_mci_exynos_setup_clock,
|
|
.prepare_command = dw_mci_exynos_prepare_command,
|
|
.set_ios = dw_mci_exynos_set_ios,
|
|
.parse_dt = dw_mci_exynos_parse_dt,
|
|
.setup_bus = dw_mci_exynos_setup_bus,
|
|
};
|
|
|
|
static const struct of_device_id dw_mci_exynos_match[] = {
|
|
{ .compatible = "samsung,exynos5250-dw-mshc",
|
|
.data = &exynos5250_drv_data, },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, dw_mci_exynos_match);
|
|
|
|
int dw_mci_exynos_probe(struct platform_device *pdev)
|
|
{
|
|
const struct dw_mci_drv_data *drv_data;
|
|
const struct of_device_id *match;
|
|
|
|
match = of_match_node(dw_mci_exynos_match, pdev->dev.of_node);
|
|
drv_data = match->data;
|
|
return dw_mci_pltfm_register(pdev, drv_data);
|
|
}
|
|
|
|
static struct platform_driver dw_mci_exynos_pltfm_driver = {
|
|
.probe = dw_mci_exynos_probe,
|
|
.remove = __exit_p(dw_mci_pltfm_remove),
|
|
.driver = {
|
|
.name = "dwmmc_exynos",
|
|
.of_match_table = of_match_ptr(dw_mci_exynos_match),
|
|
.pm = &dw_mci_pltfm_pmops,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(dw_mci_exynos_pltfm_driver);
|
|
|
|
MODULE_DESCRIPTION("Samsung Specific DW-MSHC Driver Extension");
|
|
MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:dwmmc-exynos");
|