mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-23 20:53:53 +08:00
cf93c94581
MODULE_DEVICE_TABLE only expands to something if it's compiled for a module. So when building-in support for the phys, the mdio_device_id tables are unused. Marking them with __maybe_unused fixes the following warnings: drivers/net/phy/bcm63xx.c:134: warning: 'bcm63xx_tbl' defined but not used drivers/net/phy/broadcom.c:933: warning: 'broadcom_tbl' defined but not used drivers/net/phy/cicada.c:162: warning: 'cicada_tbl' defined but not used drivers/net/phy/davicom.c:222: warning: 'davicom_tbl' defined but not used drivers/net/phy/et1011c.c:114: warning: 'et1011c_tbl' defined but not used drivers/net/phy/icplus.c:137: warning: 'icplus_tbl' defined but not used drivers/net/phy/lxt.c:226: warning: 'lxt_tbl' defined but not used drivers/net/phy/marvell.c:724: warning: 'marvell_tbl' defined but not used drivers/net/phy/micrel.c:234: warning: 'micrel_tbl' defined but not used drivers/net/phy/national.c:154: warning: 'ns_tbl' defined but not used drivers/net/phy/qsemi.c:141: warning: 'qs6612_tbl' defined but not used drivers/net/phy/realtek.c:82: warning: 'realtek_tbl' defined but not used drivers/net/phy/smsc.c:257: warning: 'smsc_tbl' defined but not used drivers/net/phy/ste10Xp.c:135: warning: 'ste10Xp_tbl' defined but not used drivers/net/phy/vitesse.c:195: warning: 'vitesse_tbl' defined but not used Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
160 lines
4.1 KiB
C
160 lines
4.1 KiB
C
/*
|
|
* drivers/net/phy/national.c
|
|
*
|
|
* Driver for National Semiconductor PHYs
|
|
*
|
|
* Author: Stuart Menefy <stuart.menefy@st.com>
|
|
* Maintainer: Giuseppe Cavallaro <peppe.cavallaro@st.com>
|
|
*
|
|
* Copyright (c) 2008 STMicroelectronics Limited
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/netdevice.h>
|
|
|
|
/* DP83865 phy identifier values */
|
|
#define DP83865_PHY_ID 0x20005c7a
|
|
|
|
#define DP83865_INT_MASK_REG 0x15
|
|
#define DP83865_INT_MASK_STATUS 0x14
|
|
|
|
#define DP83865_INT_REMOTE_FAULT 0x0008
|
|
#define DP83865_INT_ANE_COMPLETED 0x0010
|
|
#define DP83865_INT_LINK_CHANGE 0xe000
|
|
#define DP83865_INT_MASK_DEFAULT (DP83865_INT_REMOTE_FAULT | \
|
|
DP83865_INT_ANE_COMPLETED | \
|
|
DP83865_INT_LINK_CHANGE)
|
|
|
|
/* Advanced proprietary configuration */
|
|
#define NS_EXP_MEM_CTL 0x16
|
|
#define NS_EXP_MEM_DATA 0x1d
|
|
#define NS_EXP_MEM_ADD 0x1e
|
|
|
|
#define LED_CTRL_REG 0x13
|
|
#define AN_FALLBACK_AN 0x0001
|
|
#define AN_FALLBACK_CRC 0x0002
|
|
#define AN_FALLBACK_IE 0x0004
|
|
#define ALL_FALLBACK_ON (AN_FALLBACK_AN | AN_FALLBACK_CRC | AN_FALLBACK_IE)
|
|
|
|
enum hdx_loopback {
|
|
hdx_loopback_on = 0,
|
|
hdx_loopback_off = 1,
|
|
};
|
|
|
|
static u8 ns_exp_read(struct phy_device *phydev, u16 reg)
|
|
{
|
|
phy_write(phydev, NS_EXP_MEM_ADD, reg);
|
|
return phy_read(phydev, NS_EXP_MEM_DATA);
|
|
}
|
|
|
|
static void ns_exp_write(struct phy_device *phydev, u16 reg, u8 data)
|
|
{
|
|
phy_write(phydev, NS_EXP_MEM_ADD, reg);
|
|
phy_write(phydev, NS_EXP_MEM_DATA, data);
|
|
}
|
|
|
|
static int ns_config_intr(struct phy_device *phydev)
|
|
{
|
|
int err;
|
|
|
|
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
|
|
err = phy_write(phydev, DP83865_INT_MASK_REG,
|
|
DP83865_INT_MASK_DEFAULT);
|
|
else
|
|
err = phy_write(phydev, DP83865_INT_MASK_REG, 0);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int ns_ack_interrupt(struct phy_device *phydev)
|
|
{
|
|
int ret = phy_read(phydev, DP83865_INT_MASK_STATUS);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ns_giga_speed_fallback(struct phy_device *phydev, int mode)
|
|
{
|
|
int bmcr = phy_read(phydev, MII_BMCR);
|
|
|
|
phy_write(phydev, MII_BMCR, (bmcr | BMCR_PDOWN));
|
|
|
|
/* Enable 8 bit expended memory read/write (no auto increment) */
|
|
phy_write(phydev, NS_EXP_MEM_CTL, 0);
|
|
phy_write(phydev, NS_EXP_MEM_ADD, 0x1C0);
|
|
phy_write(phydev, NS_EXP_MEM_DATA, 0x0008);
|
|
phy_write(phydev, MII_BMCR, (bmcr & ~BMCR_PDOWN));
|
|
phy_write(phydev, LED_CTRL_REG, mode);
|
|
}
|
|
|
|
static void ns_10_base_t_hdx_loopack(struct phy_device *phydev, int disable)
|
|
{
|
|
if (disable)
|
|
ns_exp_write(phydev, 0x1c0, ns_exp_read(phydev, 0x1c0) | 1);
|
|
else
|
|
ns_exp_write(phydev, 0x1c0,
|
|
ns_exp_read(phydev, 0x1c0) & 0xfffe);
|
|
|
|
printk(KERN_DEBUG "DP83865 PHY: 10BASE-T HDX loopback %s\n",
|
|
(ns_exp_read(phydev, 0x1c0) & 0x0001) ? "off" : "on");
|
|
}
|
|
|
|
static int ns_config_init(struct phy_device *phydev)
|
|
{
|
|
ns_giga_speed_fallback(phydev, ALL_FALLBACK_ON);
|
|
/* In the latest MAC or switches design, the 10 Mbps loopback
|
|
is desired to be turned off. */
|
|
ns_10_base_t_hdx_loopack(phydev, hdx_loopback_off);
|
|
return ns_ack_interrupt(phydev);
|
|
}
|
|
|
|
static struct phy_driver dp83865_driver = {
|
|
.phy_id = DP83865_PHY_ID,
|
|
.phy_id_mask = 0xfffffff0,
|
|
.name = "NatSemi DP83865",
|
|
.features = PHY_GBIT_FEATURES | SUPPORTED_Pause | SUPPORTED_Asym_Pause,
|
|
.flags = PHY_HAS_INTERRUPT,
|
|
.config_init = ns_config_init,
|
|
.config_aneg = genphy_config_aneg,
|
|
.read_status = genphy_read_status,
|
|
.ack_interrupt = ns_ack_interrupt,
|
|
.config_intr = ns_config_intr,
|
|
.driver = {.owner = THIS_MODULE,}
|
|
};
|
|
|
|
static int __init ns_init(void)
|
|
{
|
|
return phy_driver_register(&dp83865_driver);
|
|
}
|
|
|
|
static void __exit ns_exit(void)
|
|
{
|
|
phy_driver_unregister(&dp83865_driver);
|
|
}
|
|
|
|
MODULE_DESCRIPTION("NatSemi PHY driver");
|
|
MODULE_AUTHOR("Stuart Menefy");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_init(ns_init);
|
|
module_exit(ns_exit);
|
|
|
|
static struct mdio_device_id __maybe_unused ns_tbl[] = {
|
|
{ DP83865_PHY_ID, 0xfffffff0 },
|
|
{ }
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(mdio, ns_tbl);
|