mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-29 15:43:59 +08:00
a55448d1c0
Add documentation for SATA PHY available in Broadcom's NSP SoC. Signed-off-by: Yendapally Reddy Dhananjaya Reddy <yendapally.reddy@broadcom.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Tejun Heo <tj@kernel.org>
47 lines
1.1 KiB
Plaintext
47 lines
1.1 KiB
Plaintext
* Broadcom SATA3 PHY
|
|
|
|
Required properties:
|
|
- compatible: should be one or more of
|
|
"brcm,bcm7425-sata-phy"
|
|
"brcm,bcm7445-sata-phy"
|
|
"brcm,iproc-ns2-sata-phy"
|
|
"brcm,iproc-nsp-sata-phy"
|
|
"brcm,phy-sata3"
|
|
- address-cells: should be 1
|
|
- size-cells: should be 0
|
|
- reg: register ranges for the PHY PCB interface
|
|
- reg-names: should be "phy" and "phy-ctrl"
|
|
The "phy-ctrl" registers are only required for
|
|
"brcm,iproc-ns2-sata-phy".
|
|
|
|
Sub-nodes:
|
|
Each port's PHY should be represented as a sub-node.
|
|
|
|
Sub-nodes required properties:
|
|
- reg: the PHY number
|
|
- phy-cells: generic PHY binding; must be 0
|
|
|
|
Sub-nodes optional properties:
|
|
- brcm,enable-ssc: use spread spectrum clocking (SSC) on this port
|
|
This property is not applicable for "brcm,iproc-ns2-sata-phy" and
|
|
"brcm,iproc-nsp-sata-phy".
|
|
|
|
Example:
|
|
sata-phy@f0458100 {
|
|
compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3";
|
|
reg = <0xf0458100 0x1e00>, <0xf045804c 0x10>;
|
|
reg-names = "phy";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
sata-phy@0 {
|
|
reg = <0>;
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
sata-phy@1 {
|
|
reg = <1>;
|
|
#phy-cells = <0>;
|
|
};
|
|
};
|