2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 04:34:11 +08:00
linux-next/drivers/iio/imu/adis_buffer.c
Nuno Sá 3e04cb60e8 iio: adis: Support different burst sizes
Add burst_max_len to `adis_burst`. This is useful for devices which
support different burst modes with different sizes. The buffer to be
used in the spi transfer is allocated with this variable making sure
that has space for all burst modes. The spi transfer length should hold
the "real" burst length depending on the current burst mode configured
in the device.

Moreover, `extra_len` in `adis_burst` is made const and it should
contain the smallest extra length necessary for a burst transfer. In
`struct adis` was added a new `burst_extra_len` that should hold the
extra bytes needed depending on the device instance being used.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-04-25 16:11:56 +01:00

268 lines
6.7 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Common library for ADIS16XXX devices
*
* Copyright 2012 Analog Devices Inc.
* Author: Lars-Peter Clausen <lars@metafoo.de>
*/
#include <linux/export.h>
#include <linux/interrupt.h>
#include <linux/mutex.h>
#include <linux/kernel.h>
#include <linux/spi/spi.h>
#include <linux/slab.h>
#include <linux/iio/iio.h>
#include <linux/iio/buffer.h>
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/triggered_buffer.h>
#include <linux/iio/imu/adis.h>
static int adis_update_scan_mode_burst(struct iio_dev *indio_dev,
const unsigned long *scan_mask)
{
struct adis *adis = iio_device_get_drvdata(indio_dev);
unsigned int burst_length, burst_max_length;
u8 *tx;
/* All but the timestamp channel */
burst_length = (indio_dev->num_channels - 1) * sizeof(u16);
burst_length += adis->burst->extra_len + adis->burst_extra_len;
if (adis->burst->burst_max_len)
burst_max_length = adis->burst->burst_max_len;
else
burst_max_length = burst_length;
adis->xfer = kcalloc(2, sizeof(*adis->xfer), GFP_KERNEL);
if (!adis->xfer)
return -ENOMEM;
adis->buffer = kzalloc(burst_max_length + sizeof(u16), GFP_KERNEL);
if (!adis->buffer) {
kfree(adis->xfer);
adis->xfer = NULL;
return -ENOMEM;
}
tx = adis->buffer + burst_max_length;
tx[0] = ADIS_READ_REG(adis->burst->reg_cmd);
tx[1] = 0;
adis->xfer[0].tx_buf = tx;
adis->xfer[0].bits_per_word = 8;
adis->xfer[0].len = 2;
adis->xfer[1].rx_buf = adis->buffer;
adis->xfer[1].bits_per_word = 8;
adis->xfer[1].len = burst_length;
spi_message_init(&adis->msg);
spi_message_add_tail(&adis->xfer[0], &adis->msg);
spi_message_add_tail(&adis->xfer[1], &adis->msg);
return 0;
}
int adis_update_scan_mode(struct iio_dev *indio_dev,
const unsigned long *scan_mask)
{
struct adis *adis = iio_device_get_drvdata(indio_dev);
const struct iio_chan_spec *chan;
unsigned int scan_count;
unsigned int i, j;
__be16 *tx, *rx;
kfree(adis->xfer);
kfree(adis->buffer);
if (adis->burst && adis->burst->en)
return adis_update_scan_mode_burst(indio_dev, scan_mask);
scan_count = indio_dev->scan_bytes / 2;
adis->xfer = kcalloc(scan_count + 1, sizeof(*adis->xfer), GFP_KERNEL);
if (!adis->xfer)
return -ENOMEM;
adis->buffer = kcalloc(indio_dev->scan_bytes, 2, GFP_KERNEL);
if (!adis->buffer) {
kfree(adis->xfer);
adis->xfer = NULL;
return -ENOMEM;
}
rx = adis->buffer;
tx = rx + scan_count;
spi_message_init(&adis->msg);
for (j = 0; j <= scan_count; j++) {
adis->xfer[j].bits_per_word = 8;
if (j != scan_count)
adis->xfer[j].cs_change = 1;
adis->xfer[j].len = 2;
adis->xfer[j].delay.value = adis->data->read_delay;
adis->xfer[j].delay.unit = SPI_DELAY_UNIT_USECS;
if (j < scan_count)
adis->xfer[j].tx_buf = &tx[j];
if (j >= 1)
adis->xfer[j].rx_buf = &rx[j - 1];
spi_message_add_tail(&adis->xfer[j], &adis->msg);
}
chan = indio_dev->channels;
for (i = 0; i < indio_dev->num_channels; i++, chan++) {
if (!test_bit(chan->scan_index, scan_mask))
continue;
if (chan->scan_type.storagebits == 32)
*tx++ = cpu_to_be16((chan->address + 2) << 8);
*tx++ = cpu_to_be16(chan->address << 8);
}
return 0;
}
EXPORT_SYMBOL_GPL(adis_update_scan_mode);
static irqreturn_t adis_trigger_handler(int irq, void *p)
{
struct iio_poll_func *pf = p;
struct iio_dev *indio_dev = pf->indio_dev;
struct adis *adis = iio_device_get_drvdata(indio_dev);
int ret;
if (!adis->buffer)
return -ENOMEM;
if (adis->data->has_paging) {
mutex_lock(&adis->state_lock);
if (adis->current_page != 0) {
adis->tx[0] = ADIS_WRITE_REG(ADIS_REG_PAGE_ID);
adis->tx[1] = 0;
spi_write(adis->spi, adis->tx, 2);
}
}
ret = spi_sync(adis->spi, &adis->msg);
if (ret)
dev_err(&adis->spi->dev, "Failed to read data: %d", ret);
if (adis->data->has_paging) {
adis->current_page = 0;
mutex_unlock(&adis->state_lock);
}
iio_push_to_buffers_with_timestamp(indio_dev, adis->buffer,
pf->timestamp);
iio_trigger_notify_done(indio_dev->trig);
return IRQ_HANDLED;
}
static void adis_buffer_cleanup(void *arg)
{
struct adis *adis = arg;
kfree(adis->buffer);
kfree(adis->xfer);
}
/**
* adis_setup_buffer_and_trigger() - Sets up buffer and trigger for the adis device
* @adis: The adis device.
* @indio_dev: The IIO device.
* @trigger_handler: Optional trigger handler, may be NULL.
*
* Returns 0 on success, a negative error code otherwise.
*
* This function sets up the buffer and trigger for a adis devices. If
* 'trigger_handler' is NULL the default trigger handler will be used. The
* default trigger handler will simply read the registers assigned to the
* currently active channels.
*
* adis_cleanup_buffer_and_trigger() should be called to free the resources
* allocated by this function.
*/
int adis_setup_buffer_and_trigger(struct adis *adis, struct iio_dev *indio_dev,
irqreturn_t (*trigger_handler)(int, void *))
{
int ret;
if (!trigger_handler)
trigger_handler = adis_trigger_handler;
ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
trigger_handler, NULL);
if (ret)
return ret;
if (adis->spi->irq) {
ret = adis_probe_trigger(adis, indio_dev);
if (ret)
goto error_buffer_cleanup;
}
return 0;
error_buffer_cleanup:
iio_triggered_buffer_cleanup(indio_dev);
return ret;
}
EXPORT_SYMBOL_GPL(adis_setup_buffer_and_trigger);
/**
* devm_adis_setup_buffer_and_trigger() - Sets up buffer and trigger for
* the managed adis device
* @adis: The adis device
* @indio_dev: The IIO device
* @trigger_handler: Optional trigger handler, may be NULL.
*
* Returns 0 on success, a negative error code otherwise.
*
* This function perfoms exactly the same as adis_setup_buffer_and_trigger()
*/
int
devm_adis_setup_buffer_and_trigger(struct adis *adis, struct iio_dev *indio_dev,
irq_handler_t trigger_handler)
{
int ret;
if (!trigger_handler)
trigger_handler = adis_trigger_handler;
ret = devm_iio_triggered_buffer_setup(&adis->spi->dev, indio_dev,
&iio_pollfunc_store_time,
trigger_handler, NULL);
if (ret)
return ret;
if (adis->spi->irq) {
ret = devm_adis_probe_trigger(adis, indio_dev);
if (ret)
return ret;
}
return devm_add_action_or_reset(&adis->spi->dev, adis_buffer_cleanup,
adis);
}
EXPORT_SYMBOL_GPL(devm_adis_setup_buffer_and_trigger);
/**
* adis_cleanup_buffer_and_trigger() - Free buffer and trigger resources
* @adis: The adis device.
* @indio_dev: The IIO device.
*
* Frees resources allocated by adis_setup_buffer_and_trigger()
*/
void adis_cleanup_buffer_and_trigger(struct adis *adis,
struct iio_dev *indio_dev)
{
if (adis->spi->irq)
adis_remove_trigger(adis);
kfree(adis->buffer);
kfree(adis->xfer);
iio_triggered_buffer_cleanup(indio_dev);
}
EXPORT_SYMBOL_GPL(adis_cleanup_buffer_and_trigger);