2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-12 15:24:00 +08:00
linux-next/drivers/regulator/tps6287x-regulator.c
Chen-Yu Tsai 269cb04b60
regulator: Use bitfield values for range selectors
Right now the regulator helpers expect raw register values for the range
selectors. This is different from the voltage selectors, which are
normalized as bitfield values. This leads to a bit of confusion. Also,
raw values are harder to copy from datasheets or match up with them,
as datasheets will typically have bitfield values.

Make the helpers expect bitfield values, and convert existing users. The
field in regulator_desc is renamed to |linear_range_selectors_bitfield|.
This is intended to cause drivers added in the same merge window and
out-of-tree drivers using the incorrect variable and values to break,
preventing incorrect values being used on actual hardware and potentially
producing magic smoke.

Also include bitops.h explicitly for ffs(), and reorder the header include
statements. While at it, also replace module.h with export.h, since the
only use is EXPORT_SYMBOL_GPL.

Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20230714081408.274567-1-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-25 12:14:27 +01:00

190 lines
4.8 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2023 Axis Communications AB
*
* Driver for Texas Instruments TPS6287x PMIC.
* Datasheet: https://www.ti.com/lit/ds/symlink/tps62873.pdf
*/
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/regulator/of_regulator.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/driver.h>
#include <linux/bitfield.h>
#include <linux/linear_range.h>
#define TPS6287X_VSET 0x00
#define TPS6287X_CTRL1 0x01
#define TPS6287X_CTRL1_VRAMP GENMASK(1, 0)
#define TPS6287X_CTRL1_FPWMEN BIT(4)
#define TPS6287X_CTRL1_SWEN BIT(5)
#define TPS6287X_CTRL2 0x02
#define TPS6287X_CTRL2_VRANGE GENMASK(3, 2)
#define TPS6287X_CTRL3 0x03
#define TPS6287X_STATUS 0x04
static const struct regmap_config tps6287x_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.max_register = TPS6287X_STATUS,
};
static const struct linear_range tps6287x_voltage_ranges[] = {
LINEAR_RANGE(400000, 0, 0xFF, 1250),
LINEAR_RANGE(400000, 0, 0xFF, 2500),
LINEAR_RANGE(400000, 0, 0xFF, 5000),
LINEAR_RANGE(800000, 0, 0xFF, 10000),
};
static const unsigned int tps6287x_voltage_range_sel[] = {
0x0, 0x1, 0x2, 0x3
};
static const unsigned int tps6287x_ramp_table[] = {
10000, 5000, 1250, 500
};
static int tps6287x_set_mode(struct regulator_dev *rdev, unsigned int mode)
{
unsigned int val;
switch (mode) {
case REGULATOR_MODE_NORMAL:
val = 0;
break;
case REGULATOR_MODE_FAST:
val = TPS6287X_CTRL1_FPWMEN;
break;
default:
return -EINVAL;
}
return regmap_update_bits(rdev->regmap, TPS6287X_CTRL1,
TPS6287X_CTRL1_FPWMEN, val);
}
static unsigned int tps6287x_get_mode(struct regulator_dev *rdev)
{
unsigned int val;
int ret;
ret = regmap_read(rdev->regmap, TPS6287X_CTRL1, &val);
if (ret < 0)
return 0;
return (val & TPS6287X_CTRL1_FPWMEN) ? REGULATOR_MODE_FAST :
REGULATOR_MODE_NORMAL;
}
static unsigned int tps6287x_of_map_mode(unsigned int mode)
{
switch (mode) {
case REGULATOR_MODE_NORMAL:
case REGULATOR_MODE_FAST:
return mode;
default:
return REGULATOR_MODE_INVALID;
}
}
static const struct regulator_ops tps6287x_regulator_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.set_mode = tps6287x_set_mode,
.get_mode = tps6287x_get_mode,
.is_enabled = regulator_is_enabled_regmap,
.get_voltage_sel = regulator_get_voltage_sel_pickable_regmap,
.set_voltage_sel = regulator_set_voltage_sel_pickable_regmap,
.list_voltage = regulator_list_voltage_pickable_linear_range,
.set_ramp_delay = regulator_set_ramp_delay_regmap,
};
static struct regulator_desc tps6287x_reg = {
.name = "tps6287x",
.owner = THIS_MODULE,
.ops = &tps6287x_regulator_ops,
.of_map_mode = tps6287x_of_map_mode,
.type = REGULATOR_VOLTAGE,
.enable_reg = TPS6287X_CTRL1,
.enable_mask = TPS6287X_CTRL1_SWEN,
.vsel_reg = TPS6287X_VSET,
.vsel_mask = 0xFF,
.vsel_range_reg = TPS6287X_CTRL2,
.vsel_range_mask = TPS6287X_CTRL2_VRANGE,
.ramp_reg = TPS6287X_CTRL1,
.ramp_mask = TPS6287X_CTRL1_VRAMP,
.ramp_delay_table = tps6287x_ramp_table,
.n_ramp_values = ARRAY_SIZE(tps6287x_ramp_table),
.n_voltages = 256,
.linear_ranges = tps6287x_voltage_ranges,
.n_linear_ranges = ARRAY_SIZE(tps6287x_voltage_ranges),
.linear_range_selectors_bitfield = tps6287x_voltage_range_sel,
};
static int tps6287x_i2c_probe(struct i2c_client *i2c)
{
struct device *dev = &i2c->dev;
struct regulator_config config = {};
struct regulator_dev *rdev;
config.regmap = devm_regmap_init_i2c(i2c, &tps6287x_regmap_config);
if (IS_ERR(config.regmap)) {
dev_err(dev, "Failed to init i2c\n");
return PTR_ERR(config.regmap);
}
config.dev = dev;
config.of_node = dev->of_node;
config.init_data = of_get_regulator_init_data(dev, dev->of_node,
&tps6287x_reg);
rdev = devm_regulator_register(dev, &tps6287x_reg, &config);
if (IS_ERR(rdev)) {
dev_err(dev, "Failed to register regulator\n");
return PTR_ERR(rdev);
}
dev_dbg(dev, "Probed regulator\n");
return 0;
}
static const struct of_device_id tps6287x_dt_ids[] = {
{ .compatible = "ti,tps62870", },
{ .compatible = "ti,tps62871", },
{ .compatible = "ti,tps62872", },
{ .compatible = "ti,tps62873", },
{ }
};
MODULE_DEVICE_TABLE(of, tps6287x_dt_ids);
static const struct i2c_device_id tps6287x_i2c_id[] = {
{ "tps62870", 0 },
{ "tps62871", 0 },
{ "tps62872", 0 },
{ "tps62873", 0 },
{},
};
MODULE_DEVICE_TABLE(i2c, tps6287x_i2c_id);
static struct i2c_driver tps6287x_regulator_driver = {
.driver = {
.name = "tps6287x",
.of_match_table = tps6287x_dt_ids,
},
.probe = tps6287x_i2c_probe,
.id_table = tps6287x_i2c_id,
};
module_i2c_driver(tps6287x_regulator_driver);
MODULE_AUTHOR("Mårten Lindahl <marten.lindahl@axis.com>");
MODULE_DESCRIPTION("Regulator driver for TI TPS6287X PMIC");
MODULE_LICENSE("GPL");