2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-12 15:24:00 +08:00
linux-next/drivers/regulator/pwm-regulator.c
Rob Herring 045a44d4c9
regulator: Explicitly include correct DT includes
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it as merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. As a result, there's a pretty much random mix of those include
files used throughout the tree. In order to detangle these headers and
replace the implicit includes with struct declarations, users need to
explicitly include the correct includes.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230714174930.4063320-1-robh@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-07-14 20:52:54 +01:00

408 lines
10 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Regulator driver for PWM Regulators
*
* Copyright (C) 2014 - STMicroelectronics Inc.
*
* Author: Lee Jones <lee.jones@linaro.org>
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/of_regulator.h>
#include <linux/of.h>
#include <linux/pwm.h>
#include <linux/gpio/consumer.h>
struct pwm_continuous_reg_data {
unsigned int min_uV_dutycycle;
unsigned int max_uV_dutycycle;
unsigned int dutycycle_unit;
};
struct pwm_regulator_data {
/* Shared */
struct pwm_device *pwm;
/* Voltage table */
struct pwm_voltages *duty_cycle_table;
/* Continuous mode info */
struct pwm_continuous_reg_data continuous;
/* regulator descriptor */
struct regulator_desc desc;
int state;
/* Enable GPIO */
struct gpio_desc *enb_gpio;
};
struct pwm_voltages {
unsigned int uV;
unsigned int dutycycle;
};
/*
* Voltage table call-backs
*/
static void pwm_regulator_init_state(struct regulator_dev *rdev)
{
struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
struct pwm_state pwm_state;
unsigned int dutycycle;
int i;
pwm_get_state(drvdata->pwm, &pwm_state);
dutycycle = pwm_get_relative_duty_cycle(&pwm_state, 100);
for (i = 0; i < rdev->desc->n_voltages; i++) {
if (dutycycle == drvdata->duty_cycle_table[i].dutycycle) {
drvdata->state = i;
return;
}
}
}
static int pwm_regulator_get_voltage_sel(struct regulator_dev *rdev)
{
struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
if (drvdata->state < 0)
pwm_regulator_init_state(rdev);
return drvdata->state;
}
static int pwm_regulator_set_voltage_sel(struct regulator_dev *rdev,
unsigned selector)
{
struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
struct pwm_state pstate;
int ret;
pwm_init_state(drvdata->pwm, &pstate);
pwm_set_relative_duty_cycle(&pstate,
drvdata->duty_cycle_table[selector].dutycycle, 100);
ret = pwm_apply_state(drvdata->pwm, &pstate);
if (ret) {
dev_err(&rdev->dev, "Failed to configure PWM: %d\n", ret);
return ret;
}
drvdata->state = selector;
return 0;
}
static int pwm_regulator_list_voltage(struct regulator_dev *rdev,
unsigned selector)
{
struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
if (selector >= rdev->desc->n_voltages)
return -EINVAL;
return drvdata->duty_cycle_table[selector].uV;
}
static int pwm_regulator_enable(struct regulator_dev *dev)
{
struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
gpiod_set_value_cansleep(drvdata->enb_gpio, 1);
return pwm_enable(drvdata->pwm);
}
static int pwm_regulator_disable(struct regulator_dev *dev)
{
struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
pwm_disable(drvdata->pwm);
gpiod_set_value_cansleep(drvdata->enb_gpio, 0);
return 0;
}
static int pwm_regulator_is_enabled(struct regulator_dev *dev)
{
struct pwm_regulator_data *drvdata = rdev_get_drvdata(dev);
if (drvdata->enb_gpio && !gpiod_get_value_cansleep(drvdata->enb_gpio))
return false;
return pwm_is_enabled(drvdata->pwm);
}
static int pwm_regulator_get_voltage(struct regulator_dev *rdev)
{
struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
unsigned int min_uV_duty = drvdata->continuous.min_uV_dutycycle;
unsigned int max_uV_duty = drvdata->continuous.max_uV_dutycycle;
unsigned int duty_unit = drvdata->continuous.dutycycle_unit;
int min_uV = rdev->constraints->min_uV;
int max_uV = rdev->constraints->max_uV;
int diff_uV = max_uV - min_uV;
struct pwm_state pstate;
unsigned int diff_duty;
unsigned int voltage;
pwm_get_state(drvdata->pwm, &pstate);
voltage = pwm_get_relative_duty_cycle(&pstate, duty_unit);
/*
* The dutycycle for min_uV might be greater than the one for max_uV.
* This is happening when the user needs an inversed polarity, but the
* PWM device does not support inversing it in hardware.
*/
if (max_uV_duty < min_uV_duty) {
voltage = min_uV_duty - voltage;
diff_duty = min_uV_duty - max_uV_duty;
} else {
voltage = voltage - min_uV_duty;
diff_duty = max_uV_duty - min_uV_duty;
}
voltage = DIV_ROUND_CLOSEST_ULL((u64)voltage * diff_uV, diff_duty);
return voltage + min_uV;
}
static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
int req_min_uV, int req_max_uV,
unsigned int *selector)
{
struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev);
unsigned int min_uV_duty = drvdata->continuous.min_uV_dutycycle;
unsigned int max_uV_duty = drvdata->continuous.max_uV_dutycycle;
unsigned int duty_unit = drvdata->continuous.dutycycle_unit;
int min_uV = rdev->constraints->min_uV;
int max_uV = rdev->constraints->max_uV;
int diff_uV = max_uV - min_uV;
struct pwm_state pstate;
unsigned int diff_duty;
unsigned int dutycycle;
int ret;
pwm_init_state(drvdata->pwm, &pstate);
/*
* The dutycycle for min_uV might be greater than the one for max_uV.
* This is happening when the user needs an inversed polarity, but the
* PWM device does not support inversing it in hardware.
*/
if (max_uV_duty < min_uV_duty)
diff_duty = min_uV_duty - max_uV_duty;
else
diff_duty = max_uV_duty - min_uV_duty;
dutycycle = DIV_ROUND_CLOSEST_ULL((u64)(req_min_uV - min_uV) *
diff_duty,
diff_uV);
if (max_uV_duty < min_uV_duty)
dutycycle = min_uV_duty - dutycycle;
else
dutycycle = min_uV_duty + dutycycle;
pwm_set_relative_duty_cycle(&pstate, dutycycle, duty_unit);
ret = pwm_apply_state(drvdata->pwm, &pstate);
if (ret) {
dev_err(&rdev->dev, "Failed to configure PWM: %d\n", ret);
return ret;
}
return 0;
}
static const struct regulator_ops pwm_regulator_voltage_table_ops = {
.set_voltage_sel = pwm_regulator_set_voltage_sel,
.get_voltage_sel = pwm_regulator_get_voltage_sel,
.list_voltage = pwm_regulator_list_voltage,
.map_voltage = regulator_map_voltage_iterate,
.enable = pwm_regulator_enable,
.disable = pwm_regulator_disable,
.is_enabled = pwm_regulator_is_enabled,
};
static const struct regulator_ops pwm_regulator_voltage_continuous_ops = {
.get_voltage = pwm_regulator_get_voltage,
.set_voltage = pwm_regulator_set_voltage,
.enable = pwm_regulator_enable,
.disable = pwm_regulator_disable,
.is_enabled = pwm_regulator_is_enabled,
};
static const struct regulator_desc pwm_regulator_desc = {
.name = "pwm-regulator",
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.supply_name = "pwm",
};
static int pwm_regulator_init_table(struct platform_device *pdev,
struct pwm_regulator_data *drvdata)
{
struct device_node *np = pdev->dev.of_node;
struct pwm_voltages *duty_cycle_table;
unsigned int length = 0;
int ret;
of_find_property(np, "voltage-table", &length);
if ((length < sizeof(*duty_cycle_table)) ||
(length % sizeof(*duty_cycle_table))) {
dev_err(&pdev->dev, "voltage-table length(%d) is invalid\n",
length);
return -EINVAL;
}
duty_cycle_table = devm_kzalloc(&pdev->dev, length, GFP_KERNEL);
if (!duty_cycle_table)
return -ENOMEM;
ret = of_property_read_u32_array(np, "voltage-table",
(u32 *)duty_cycle_table,
length / sizeof(u32));
if (ret) {
dev_err(&pdev->dev, "Failed to read voltage-table: %d\n", ret);
return ret;
}
drvdata->state = -ENOTRECOVERABLE;
drvdata->duty_cycle_table = duty_cycle_table;
drvdata->desc.ops = &pwm_regulator_voltage_table_ops;
drvdata->desc.n_voltages = length / sizeof(*duty_cycle_table);
return 0;
}
static int pwm_regulator_init_continuous(struct platform_device *pdev,
struct pwm_regulator_data *drvdata)
{
u32 dutycycle_range[2] = { 0, 100 };
u32 dutycycle_unit = 100;
drvdata->desc.ops = &pwm_regulator_voltage_continuous_ops;
drvdata->desc.continuous_voltage_range = true;
of_property_read_u32_array(pdev->dev.of_node,
"pwm-dutycycle-range",
dutycycle_range, 2);
of_property_read_u32(pdev->dev.of_node, "pwm-dutycycle-unit",
&dutycycle_unit);
if (dutycycle_range[0] > dutycycle_unit ||
dutycycle_range[1] > dutycycle_unit)
return -EINVAL;
drvdata->continuous.dutycycle_unit = dutycycle_unit;
drvdata->continuous.min_uV_dutycycle = dutycycle_range[0];
drvdata->continuous.max_uV_dutycycle = dutycycle_range[1];
return 0;
}
static int pwm_regulator_probe(struct platform_device *pdev)
{
const struct regulator_init_data *init_data;
struct pwm_regulator_data *drvdata;
struct regulator_dev *regulator;
struct regulator_config config = { };
struct device_node *np = pdev->dev.of_node;
enum gpiod_flags gpio_flags;
int ret;
if (!np) {
dev_err(&pdev->dev, "Device Tree node missing\n");
return -EINVAL;
}
drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
if (!drvdata)
return -ENOMEM;
memcpy(&drvdata->desc, &pwm_regulator_desc, sizeof(drvdata->desc));
if (of_property_present(np, "voltage-table"))
ret = pwm_regulator_init_table(pdev, drvdata);
else
ret = pwm_regulator_init_continuous(pdev, drvdata);
if (ret)
return ret;
init_data = of_get_regulator_init_data(&pdev->dev, np,
&drvdata->desc);
if (!init_data)
return -ENOMEM;
config.of_node = np;
config.dev = &pdev->dev;
config.driver_data = drvdata;
config.init_data = init_data;
drvdata->pwm = devm_pwm_get(&pdev->dev, NULL);
if (IS_ERR(drvdata->pwm))
return dev_err_probe(&pdev->dev, PTR_ERR(drvdata->pwm),
"Failed to get PWM\n");
if (init_data->constraints.boot_on || init_data->constraints.always_on)
gpio_flags = GPIOD_OUT_HIGH;
else
gpio_flags = GPIOD_OUT_LOW;
drvdata->enb_gpio = devm_gpiod_get_optional(&pdev->dev, "enable",
gpio_flags);
if (IS_ERR(drvdata->enb_gpio)) {
ret = PTR_ERR(drvdata->enb_gpio);
dev_err(&pdev->dev, "Failed to get enable GPIO: %d\n", ret);
return ret;
}
ret = pwm_adjust_config(drvdata->pwm);
if (ret)
return ret;
regulator = devm_regulator_register(&pdev->dev,
&drvdata->desc, &config);
if (IS_ERR(regulator)) {
ret = PTR_ERR(regulator);
dev_err(&pdev->dev, "Failed to register regulator %s: %d\n",
drvdata->desc.name, ret);
return ret;
}
return 0;
}
static const struct of_device_id __maybe_unused pwm_of_match[] = {
{ .compatible = "pwm-regulator" },
{ },
};
MODULE_DEVICE_TABLE(of, pwm_of_match);
static struct platform_driver pwm_regulator_driver = {
.driver = {
.name = "pwm-regulator",
.probe_type = PROBE_PREFER_ASYNCHRONOUS,
.of_match_table = of_match_ptr(pwm_of_match),
},
.probe = pwm_regulator_probe,
};
module_platform_driver(pwm_regulator_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Lee Jones <lee.jones@linaro.org>");
MODULE_DESCRIPTION("PWM Regulator Driver");
MODULE_ALIAS("platform:pwm-regulator");