mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-25 05:34:00 +08:00
ec82905177
Signed-off-by: Pavel Roskin <proski@gnu.org> diff-tree dce61aef99ceb57370b70222dc34d788666c0ac3 (from ceb6695092be8dcdfe2dec6ee5097d613011489d) Author: Pavel Roskin <proski@gnu.org> Date: Thu Sep 1 15:50:55 2005 -0400 New driver - orinoco_nortel. This is a driver for Nortel emobility PCI adaptors, which consist of an Orinoco compatible PCMCIA card and a simple PCI-to-PCMCIA bridge. The driver initializes the device and uses Orinoco core driver for actual wireless networking. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
325 lines
8.1 KiB
C
325 lines
8.1 KiB
C
/* orinoco_nortel.c
|
|
*
|
|
* Driver for Prism II devices which would usually be driven by orinoco_cs,
|
|
* but are connected to the PCI bus by a Nortel PCI-PCMCIA-Adapter.
|
|
*
|
|
* Copyright (C) 2002 Tobias Hoffmann
|
|
* (C) 2003 Christoph Jungegger <disdos@traum404.de>
|
|
*
|
|
* Some of this code is borrowed from orinoco_plx.c
|
|
* Copyright (C) 2001 Daniel Barlow
|
|
* Some of this code is borrowed from orinoco_pci.c
|
|
* Copyright (C) 2001 Jean Tourrilhes
|
|
* Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing
|
|
* has been copied from it. linux-wlan-ng-0.1.10 is originally :
|
|
* Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved.
|
|
*
|
|
* The contents of this file are subject to the Mozilla Public License
|
|
* Version 1.1 (the "License"); you may not use this file except in
|
|
* compliance with the License. You may obtain a copy of the License
|
|
* at http://www.mozilla.org/MPL/
|
|
*
|
|
* Software distributed under the License is distributed on an "AS IS"
|
|
* basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
|
|
* the License for the specific language governing rights and
|
|
* limitations under the License.
|
|
*
|
|
* Alternatively, the contents of this file may be used under the
|
|
* terms of the GNU General Public License version 2 (the "GPL"), in
|
|
* which case the provisions of the GPL are applicable instead of the
|
|
* above. If you wish to allow the use of your version of this file
|
|
* only under the terms of the GPL and not to allow others to use your
|
|
* version of this file under the MPL, indicate your decision by
|
|
* deleting the provisions above and replace them with the notice and
|
|
* other provisions required by the GPL. If you do not delete the
|
|
* provisions above, a recipient may use your version of this file
|
|
* under either the MPL or the GPL.
|
|
*/
|
|
|
|
#define DRIVER_NAME "orinoco_nortel"
|
|
#define PFX DRIVER_NAME ": "
|
|
|
|
#include <linux/config.h>
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/ptrace.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/string.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/ioport.h>
|
|
#include <asm/uaccess.h>
|
|
#include <asm/io.h>
|
|
#include <asm/system.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/if_arp.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/list.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/fcntl.h>
|
|
|
|
#include <pcmcia/cisreg.h>
|
|
|
|
#include "hermes.h"
|
|
#include "orinoco.h"
|
|
|
|
#define COR_OFFSET (0xe0) /* COR attribute offset of Prism2 PC card */
|
|
#define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */
|
|
|
|
|
|
/* Nortel specific data */
|
|
struct nortel_pci_card {
|
|
unsigned long iobase1;
|
|
unsigned long iobase2;
|
|
};
|
|
|
|
/*
|
|
* Do a soft reset of the PCI card using the Configuration Option Register
|
|
* We need this to get going...
|
|
* This is the part of the code that is strongly inspired from wlan-ng
|
|
*
|
|
* Note bis : Don't try to access HERMES_CMD during the reset phase.
|
|
* It just won't work !
|
|
*/
|
|
static int nortel_pci_cor_reset(struct orinoco_private *priv)
|
|
{
|
|
struct nortel_pci_card *card = priv->card;
|
|
|
|
/* Assert the reset until the card notice */
|
|
outw_p(8, card->iobase1 + 2);
|
|
inw(card->iobase2 + COR_OFFSET);
|
|
outw_p(0x80, card->iobase2 + COR_OFFSET);
|
|
mdelay(1);
|
|
|
|
/* Give time for the card to recover from this hard effort */
|
|
outw_p(0, card->iobase2 + COR_OFFSET);
|
|
outw_p(0, card->iobase2 + COR_OFFSET);
|
|
mdelay(1);
|
|
|
|
/* set COR as usual */
|
|
outw_p(COR_VALUE, card->iobase2 + COR_OFFSET);
|
|
outw_p(COR_VALUE, card->iobase2 + COR_OFFSET);
|
|
mdelay(1);
|
|
|
|
outw_p(0x228, card->iobase1 + 2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int nortel_pci_hw_init(struct nortel_pci_card *card)
|
|
{
|
|
int i;
|
|
u32 reg;
|
|
|
|
/* setup bridge */
|
|
if (inw(card->iobase1) & 1) {
|
|
printk(KERN_ERR PFX "brg1 answer1 wrong\n");
|
|
return -EBUSY;
|
|
}
|
|
outw_p(0x118, card->iobase1 + 2);
|
|
outw_p(0x108, card->iobase1 + 2);
|
|
mdelay(30);
|
|
outw_p(0x8, card->iobase1 + 2);
|
|
for (i = 0; i < 30; i++) {
|
|
mdelay(30);
|
|
if (inw(card->iobase1) & 0x10) {
|
|
break;
|
|
}
|
|
}
|
|
if (i == 30) {
|
|
printk(KERN_ERR PFX "brg1 timed out\n");
|
|
return -EBUSY;
|
|
}
|
|
if (inw(card->iobase2 + 0xe0) & 1) {
|
|
printk(KERN_ERR PFX "brg2 answer1 wrong\n");
|
|
return -EBUSY;
|
|
}
|
|
if (inw(card->iobase2 + 0xe2) & 1) {
|
|
printk(KERN_ERR PFX "brg2 answer2 wrong\n");
|
|
return -EBUSY;
|
|
}
|
|
if (inw(card->iobase2 + 0xe4) & 1) {
|
|
printk(KERN_ERR PFX "brg2 answer3 wrong\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
/* set the PCMCIA COR-Register */
|
|
outw_p(COR_VALUE, card->iobase2 + COR_OFFSET);
|
|
mdelay(1);
|
|
reg = inw(card->iobase2 + COR_OFFSET);
|
|
if (reg != COR_VALUE) {
|
|
printk(KERN_ERR PFX "Error setting COR value (reg=%x)\n",
|
|
reg);
|
|
return -EBUSY;
|
|
}
|
|
|
|
/* set leds */
|
|
outw_p(1, card->iobase1 + 10);
|
|
return 0;
|
|
}
|
|
|
|
static int nortel_pci_init_one(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
int err;
|
|
struct orinoco_private *priv;
|
|
struct nortel_pci_card *card;
|
|
struct net_device *dev;
|
|
void __iomem *iomem;
|
|
|
|
err = pci_enable_device(pdev);
|
|
if (err) {
|
|
printk(KERN_ERR PFX "Cannot enable PCI device\n");
|
|
return err;
|
|
}
|
|
|
|
err = pci_request_regions(pdev, DRIVER_NAME);
|
|
if (err != 0) {
|
|
printk(KERN_ERR PFX "Cannot obtain PCI resources\n");
|
|
goto fail_resources;
|
|
}
|
|
|
|
iomem = pci_iomap(pdev, 3, 0);
|
|
if (!iomem) {
|
|
err = -ENOMEM;
|
|
goto fail_map_io;
|
|
}
|
|
|
|
/* Allocate network device */
|
|
dev = alloc_orinocodev(sizeof(*card), nortel_pci_cor_reset);
|
|
if (!dev) {
|
|
printk(KERN_ERR PFX "Cannot allocate network device\n");
|
|
err = -ENOMEM;
|
|
goto fail_alloc;
|
|
}
|
|
|
|
priv = netdev_priv(dev);
|
|
card = priv->card;
|
|
card->iobase1 = pci_resource_start(pdev, 0);
|
|
card->iobase2 = pci_resource_start(pdev, 1);
|
|
dev->base_addr = pci_resource_start(pdev, 2);
|
|
SET_MODULE_OWNER(dev);
|
|
SET_NETDEV_DEV(dev, &pdev->dev);
|
|
|
|
hermes_struct_init(&priv->hw, iomem, HERMES_16BIT_REGSPACING);
|
|
|
|
printk(KERN_DEBUG PFX "Detected Nortel PCI device at %s irq:%d, "
|
|
"io addr:0x%lx\n", pci_name(pdev), pdev->irq, dev->base_addr);
|
|
|
|
err = request_irq(pdev->irq, orinoco_interrupt, SA_SHIRQ,
|
|
dev->name, dev);
|
|
if (err) {
|
|
printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
|
|
err = -EBUSY;
|
|
goto fail_irq;
|
|
}
|
|
dev->irq = pdev->irq;
|
|
|
|
err = nortel_pci_hw_init(card);
|
|
if (err) {
|
|
printk(KERN_ERR PFX "Hardware initialization failed\n");
|
|
goto fail;
|
|
}
|
|
|
|
err = nortel_pci_cor_reset(priv);
|
|
if (err) {
|
|
printk(KERN_ERR PFX "Initial reset failed\n");
|
|
goto fail;
|
|
}
|
|
|
|
|
|
err = register_netdev(dev);
|
|
if (err) {
|
|
printk(KERN_ERR PFX "Cannot register network device\n");
|
|
goto fail;
|
|
}
|
|
|
|
pci_set_drvdata(pdev, dev);
|
|
|
|
return 0;
|
|
|
|
fail:
|
|
free_irq(pdev->irq, dev);
|
|
|
|
fail_irq:
|
|
pci_set_drvdata(pdev, NULL);
|
|
free_orinocodev(dev);
|
|
|
|
fail_alloc:
|
|
pci_iounmap(pdev, iomem);
|
|
|
|
fail_map_io:
|
|
pci_release_regions(pdev);
|
|
|
|
fail_resources:
|
|
pci_disable_device(pdev);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void __devexit nortel_pci_remove_one(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
struct orinoco_private *priv = netdev_priv(dev);
|
|
struct nortel_pci_card *card = priv->card;
|
|
|
|
/* clear leds */
|
|
outw_p(0, card->iobase1 + 10);
|
|
|
|
unregister_netdev(dev);
|
|
free_irq(dev->irq, dev);
|
|
pci_set_drvdata(pdev, NULL);
|
|
free_orinocodev(dev);
|
|
pci_iounmap(pdev, priv->hw.iobase);
|
|
pci_release_regions(pdev);
|
|
pci_disable_device(pdev);
|
|
}
|
|
|
|
|
|
static struct pci_device_id nortel_pci_id_table[] = {
|
|
/* Nortel emobility PCI */
|
|
{0x126c, 0x8030, PCI_ANY_ID, PCI_ANY_ID,},
|
|
{0,},
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(pci, nortel_pci_id_table);
|
|
|
|
static struct pci_driver nortel_pci_driver = {
|
|
.name = DRIVER_NAME,
|
|
.id_table = nortel_pci_id_table,
|
|
.probe = nortel_pci_init_one,
|
|
.remove = __devexit_p(nortel_pci_remove_one),
|
|
};
|
|
|
|
static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
|
|
" (Tobias Hoffmann & Christoph Jungegger <disdos@traum404.de>)";
|
|
MODULE_AUTHOR("Christoph Jungegger <disdos@traum404.de>");
|
|
MODULE_DESCRIPTION
|
|
("Driver for wireless LAN cards using the Nortel PCI bridge");
|
|
MODULE_LICENSE("Dual MPL/GPL");
|
|
|
|
static int __init nortel_pci_init(void)
|
|
{
|
|
printk(KERN_DEBUG "%s\n", version);
|
|
return pci_module_init(&nortel_pci_driver);
|
|
}
|
|
|
|
static void __exit nortel_pci_exit(void)
|
|
{
|
|
pci_unregister_driver(&nortel_pci_driver);
|
|
ssleep(1);
|
|
}
|
|
|
|
module_init(nortel_pci_init);
|
|
module_exit(nortel_pci_exit);
|
|
|
|
/*
|
|
* Local variables:
|
|
* c-indent-level: 8
|
|
* c-basic-offset: 8
|
|
* tab-width: 8
|
|
* End:
|
|
*/
|