2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-17 09:43:59 +08:00
linux-next/fs/select.c
Andi Kleen 70674f95c0 [PATCH] Optimize select/poll by putting small data sets on the stack
Optimize select and poll by a using stack space for small fd sets

This brings back an old optimization from Linux 2.0.  Using the stack is
faster than kmalloc.  On a Intel P4 system it speeds up a select of a
single pty fd by about 13% (~4000 cycles -> ~3500)

It also saves memory because a daemon hanging in select or poll will
usually save one or two less pages.  This can add up - e.g.  if you have 10
daemons blocking in poll/select you save 40KB of memory.

I did a patch for this long ago, but it was never applied.  This version is
a reimplementation of the old patch that tries to be less intrusive.  I
only did the minimal changes needed for the stack allocation.

The cut off point before external memory is allocated is currently at
832bytes.  The system calls always allocate this much memory on the stack.

These 832 bytes are divided into 256 bytes frontend data (for the select
bitmaps of the pollfds) and the rest of the space for the wait queues used
by the low level drivers.  There are some extreme cases where this won't
work out for select and it falls back to allocating memory too early -
especially with very sparse large select bitmaps - but the majority of
processes who only have a small number of file descriptors should be ok.
[TBD: 832/256 might not be the best split for select or poll]

I suspect more optimizations might be possible, but they would be more
complicated.  One way would be to cache the select/poll context over
multiple system calls because typically the input values should be similar.
 Problem is when to flush the file descriptors out though.

Signed-off-by: Andi Kleen <ak@suse.de>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 09:16:04 -08:00

820 lines
20 KiB
C

/*
* This file contains the procedures for the handling of select and poll
*
* Created for Linux based loosely upon Mathius Lattner's minix
* patches by Peter MacDonald. Heavily edited by Linus.
*
* 4 February 1994
* COFF/ELF binary emulation. If the process has the STICKY_TIMEOUTS
* flag set in its personality we do *not* modify the given timeout
* parameter to reflect time remaining.
*
* 24 January 2000
* Changed sys_poll()/do_poll() to use PAGE_SIZE chunk-based allocation
* of fds to overcome nfds < 16390 descriptors limit (Tigran Aivazian).
*/
#include <linux/syscalls.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/smp_lock.h>
#include <linux/poll.h>
#include <linux/personality.h> /* for STICKY_TIMEOUTS */
#include <linux/file.h>
#include <linux/fs.h>
#include <linux/rcupdate.h>
#include <asm/uaccess.h>
#define ROUND_UP(x,y) (((x)+(y)-1)/(y))
#define DEFAULT_POLLMASK (POLLIN | POLLOUT | POLLRDNORM | POLLWRNORM)
struct poll_table_page {
struct poll_table_page * next;
struct poll_table_entry * entry;
struct poll_table_entry entries[0];
};
#define POLL_TABLE_FULL(table) \
((unsigned long)((table)->entry+1) > PAGE_SIZE + (unsigned long)(table))
/*
* Ok, Peter made a complicated, but straightforward multiple_wait() function.
* I have rewritten this, taking some shortcuts: This code may not be easy to
* follow, but it should be free of race-conditions, and it's practical. If you
* understand what I'm doing here, then you understand how the linux
* sleep/wakeup mechanism works.
*
* Two very simple procedures, poll_wait() and poll_freewait() make all the
* work. poll_wait() is an inline-function defined in <linux/poll.h>,
* as all select/poll functions have to call it to add an entry to the
* poll table.
*/
static void __pollwait(struct file *filp, wait_queue_head_t *wait_address,
poll_table *p);
void poll_initwait(struct poll_wqueues *pwq)
{
init_poll_funcptr(&pwq->pt, __pollwait);
pwq->error = 0;
pwq->table = NULL;
pwq->inline_index = 0;
}
EXPORT_SYMBOL(poll_initwait);
static void free_poll_entry(struct poll_table_entry *entry)
{
remove_wait_queue(entry->wait_address,&entry->wait);
fput(entry->filp);
}
void poll_freewait(struct poll_wqueues *pwq)
{
struct poll_table_page * p = pwq->table;
int i;
for (i = 0; i < pwq->inline_index; i++)
free_poll_entry(pwq->inline_entries + i);
while (p) {
struct poll_table_entry * entry;
struct poll_table_page *old;
entry = p->entry;
do {
entry--;
free_poll_entry(entry);
} while (entry > p->entries);
old = p;
p = p->next;
free_page((unsigned long) old);
}
}
EXPORT_SYMBOL(poll_freewait);
static struct poll_table_entry *poll_get_entry(poll_table *_p)
{
struct poll_wqueues *p = container_of(_p, struct poll_wqueues, pt);
struct poll_table_page *table = p->table;
if (p->inline_index < N_INLINE_POLL_ENTRIES)
return p->inline_entries + p->inline_index++;
if (!table || POLL_TABLE_FULL(table)) {
struct poll_table_page *new_table;
new_table = (struct poll_table_page *) __get_free_page(GFP_KERNEL);
if (!new_table) {
p->error = -ENOMEM;
__set_current_state(TASK_RUNNING);
return NULL;
}
new_table->entry = new_table->entries;
new_table->next = table;
p->table = new_table;
table = new_table;
}
return table->entry++;
}
/* Add a new entry */
static void __pollwait(struct file *filp, wait_queue_head_t *wait_address,
poll_table *p)
{
struct poll_table_entry *entry = poll_get_entry(p);
if (!entry)
return;
get_file(filp);
entry->filp = filp;
entry->wait_address = wait_address;
init_waitqueue_entry(&entry->wait, current);
add_wait_queue(wait_address,&entry->wait);
}
#define FDS_IN(fds, n) (fds->in + n)
#define FDS_OUT(fds, n) (fds->out + n)
#define FDS_EX(fds, n) (fds->ex + n)
#define BITS(fds, n) (*FDS_IN(fds, n)|*FDS_OUT(fds, n)|*FDS_EX(fds, n))
static int max_select_fd(unsigned long n, fd_set_bits *fds)
{
unsigned long *open_fds;
unsigned long set;
int max;
struct fdtable *fdt;
/* handle last in-complete long-word first */
set = ~(~0UL << (n & (__NFDBITS-1)));
n /= __NFDBITS;
fdt = files_fdtable(current->files);
open_fds = fdt->open_fds->fds_bits+n;
max = 0;
if (set) {
set &= BITS(fds, n);
if (set) {
if (!(set & ~*open_fds))
goto get_max;
return -EBADF;
}
}
while (n) {
open_fds--;
n--;
set = BITS(fds, n);
if (!set)
continue;
if (set & ~*open_fds)
return -EBADF;
if (max)
continue;
get_max:
do {
max++;
set >>= 1;
} while (set);
max += n * __NFDBITS;
}
return max;
}
#define BIT(i) (1UL << ((i)&(__NFDBITS-1)))
#define MEM(i,m) ((m)+(unsigned)(i)/__NFDBITS)
#define ISSET(i,m) (((i)&*(m)) != 0)
#define SET(i,m) (*(m) |= (i))
#define POLLIN_SET (POLLRDNORM | POLLRDBAND | POLLIN | POLLHUP | POLLERR)
#define POLLOUT_SET (POLLWRBAND | POLLWRNORM | POLLOUT | POLLERR)
#define POLLEX_SET (POLLPRI)
int do_select(int n, fd_set_bits *fds, s64 *timeout)
{
struct poll_wqueues table;
poll_table *wait;
int retval, i;
rcu_read_lock();
retval = max_select_fd(n, fds);
rcu_read_unlock();
if (retval < 0)
return retval;
n = retval;
poll_initwait(&table);
wait = &table.pt;
if (!*timeout)
wait = NULL;
retval = 0;
for (;;) {
unsigned long *rinp, *routp, *rexp, *inp, *outp, *exp;
long __timeout;
set_current_state(TASK_INTERRUPTIBLE);
inp = fds->in; outp = fds->out; exp = fds->ex;
rinp = fds->res_in; routp = fds->res_out; rexp = fds->res_ex;
for (i = 0; i < n; ++rinp, ++routp, ++rexp) {
unsigned long in, out, ex, all_bits, bit = 1, mask, j;
unsigned long res_in = 0, res_out = 0, res_ex = 0;
struct file_operations *f_op = NULL;
struct file *file = NULL;
in = *inp++; out = *outp++; ex = *exp++;
all_bits = in | out | ex;
if (all_bits == 0) {
i += __NFDBITS;
continue;
}
for (j = 0; j < __NFDBITS; ++j, ++i, bit <<= 1) {
if (i >= n)
break;
if (!(bit & all_bits))
continue;
file = fget(i);
if (file) {
f_op = file->f_op;
mask = DEFAULT_POLLMASK;
if (f_op && f_op->poll)
mask = (*f_op->poll)(file, retval ? NULL : wait);
fput(file);
if ((mask & POLLIN_SET) && (in & bit)) {
res_in |= bit;
retval++;
}
if ((mask & POLLOUT_SET) && (out & bit)) {
res_out |= bit;
retval++;
}
if ((mask & POLLEX_SET) && (ex & bit)) {
res_ex |= bit;
retval++;
}
}
cond_resched();
}
if (res_in)
*rinp = res_in;
if (res_out)
*routp = res_out;
if (res_ex)
*rexp = res_ex;
}
wait = NULL;
if (retval || !*timeout || signal_pending(current))
break;
if(table.error) {
retval = table.error;
break;
}
if (*timeout < 0) {
/* Wait indefinitely */
__timeout = MAX_SCHEDULE_TIMEOUT;
} else if (unlikely(*timeout >= (s64)MAX_SCHEDULE_TIMEOUT - 1)) {
/* Wait for longer than MAX_SCHEDULE_TIMEOUT. Do it in a loop */
__timeout = MAX_SCHEDULE_TIMEOUT - 1;
*timeout -= __timeout;
} else {
__timeout = *timeout;
*timeout = 0;
}
__timeout = schedule_timeout(__timeout);
if (*timeout >= 0)
*timeout += __timeout;
}
__set_current_state(TASK_RUNNING);
poll_freewait(&table);
return retval;
}
/*
* We can actually return ERESTARTSYS instead of EINTR, but I'd
* like to be certain this leads to no problems. So I return
* EINTR just for safety.
*
* Update: ERESTARTSYS breaks at least the xview clock binary, so
* I'm trying ERESTARTNOHAND which restart only when you want to.
*/
#define MAX_SELECT_SECONDS \
((unsigned long) (MAX_SCHEDULE_TIMEOUT / HZ)-1)
static int core_sys_select(int n, fd_set __user *inp, fd_set __user *outp,
fd_set __user *exp, s64 *timeout)
{
fd_set_bits fds;
char *bits;
int ret, size, max_fdset;
struct fdtable *fdt;
/* Allocate small arguments on the stack to save memory and be faster */
char stack_fds[SELECT_STACK_ALLOC];
ret = -EINVAL;
if (n < 0)
goto out_nofds;
/* max_fdset can increase, so grab it once to avoid race */
rcu_read_lock();
fdt = files_fdtable(current->files);
max_fdset = fdt->max_fdset;
rcu_read_unlock();
if (n > max_fdset)
n = max_fdset;
/*
* We need 6 bitmaps (in/out/ex for both incoming and outgoing),
* since we used fdset we need to allocate memory in units of
* long-words.
*/
ret = -ENOMEM;
size = FDS_BYTES(n);
if (6*size < SELECT_STACK_ALLOC)
bits = stack_fds;
else
bits = kmalloc(6 * size, GFP_KERNEL);
if (!bits)
goto out_nofds;
fds.in = (unsigned long *) bits;
fds.out = (unsigned long *) (bits + size);
fds.ex = (unsigned long *) (bits + 2*size);
fds.res_in = (unsigned long *) (bits + 3*size);
fds.res_out = (unsigned long *) (bits + 4*size);
fds.res_ex = (unsigned long *) (bits + 5*size);
if ((ret = get_fd_set(n, inp, fds.in)) ||
(ret = get_fd_set(n, outp, fds.out)) ||
(ret = get_fd_set(n, exp, fds.ex)))
goto out;
zero_fd_set(n, fds.res_in);
zero_fd_set(n, fds.res_out);
zero_fd_set(n, fds.res_ex);
ret = do_select(n, &fds, timeout);
if (ret < 0)
goto out;
if (!ret) {
ret = -ERESTARTNOHAND;
if (signal_pending(current))
goto out;
ret = 0;
}
if (set_fd_set(n, inp, fds.res_in) ||
set_fd_set(n, outp, fds.res_out) ||
set_fd_set(n, exp, fds.res_ex))
ret = -EFAULT;
out:
if (bits != stack_fds)
kfree(bits);
out_nofds:
return ret;
}
asmlinkage long sys_select(int n, fd_set __user *inp, fd_set __user *outp,
fd_set __user *exp, struct timeval __user *tvp)
{
s64 timeout = -1;
struct timeval tv;
int ret;
if (tvp) {
if (copy_from_user(&tv, tvp, sizeof(tv)))
return -EFAULT;
if (tv.tv_sec < 0 || tv.tv_usec < 0)
return -EINVAL;
/* Cast to u64 to make GCC stop complaining */
if ((u64)tv.tv_sec >= (u64)MAX_INT64_SECONDS)
timeout = -1; /* infinite */
else {
timeout = ROUND_UP(tv.tv_usec, USEC_PER_SEC/HZ);
timeout += tv.tv_sec * HZ;
}
}
ret = core_sys_select(n, inp, outp, exp, &timeout);
if (tvp) {
struct timeval rtv;
if (current->personality & STICKY_TIMEOUTS)
goto sticky;
rtv.tv_usec = jiffies_to_usecs(do_div((*(u64*)&timeout), HZ));
rtv.tv_sec = timeout;
if (timeval_compare(&rtv, &tv) >= 0)
rtv = tv;
if (copy_to_user(tvp, &rtv, sizeof(rtv))) {
sticky:
/*
* If an application puts its timeval in read-only
* memory, we don't want the Linux-specific update to
* the timeval to cause a fault after the select has
* completed successfully. However, because we're not
* updating the timeval, we can't restart the system
* call.
*/
if (ret == -ERESTARTNOHAND)
ret = -EINTR;
}
}
return ret;
}
#ifdef TIF_RESTORE_SIGMASK
asmlinkage long sys_pselect7(int n, fd_set __user *inp, fd_set __user *outp,
fd_set __user *exp, struct timespec __user *tsp,
const sigset_t __user *sigmask, size_t sigsetsize)
{
s64 timeout = MAX_SCHEDULE_TIMEOUT;
sigset_t ksigmask, sigsaved;
struct timespec ts;
int ret;
if (tsp) {
if (copy_from_user(&ts, tsp, sizeof(ts)))
return -EFAULT;
if (ts.tv_sec < 0 || ts.tv_nsec < 0)
return -EINVAL;
/* Cast to u64 to make GCC stop complaining */
if ((u64)ts.tv_sec >= (u64)MAX_INT64_SECONDS)
timeout = -1; /* infinite */
else {
timeout = ROUND_UP(ts.tv_nsec, NSEC_PER_SEC/HZ);
timeout += ts.tv_sec * HZ;
}
}
if (sigmask) {
/* XXX: Don't preclude handling different sized sigset_t's. */
if (sigsetsize != sizeof(sigset_t))
return -EINVAL;
if (copy_from_user(&ksigmask, sigmask, sizeof(ksigmask)))
return -EFAULT;
sigdelsetmask(&ksigmask, sigmask(SIGKILL)|sigmask(SIGSTOP));
sigprocmask(SIG_SETMASK, &ksigmask, &sigsaved);
}
ret = core_sys_select(n, inp, outp, exp, &timeout);
if (tsp) {
struct timespec rts;
if (current->personality & STICKY_TIMEOUTS)
goto sticky;
rts.tv_nsec = jiffies_to_usecs(do_div((*(u64*)&timeout), HZ)) *
1000;
rts.tv_sec = timeout;
if (timespec_compare(&rts, &ts) >= 0)
rts = ts;
if (copy_to_user(tsp, &rts, sizeof(rts))) {
sticky:
/*
* If an application puts its timeval in read-only
* memory, we don't want the Linux-specific update to
* the timeval to cause a fault after the select has
* completed successfully. However, because we're not
* updating the timeval, we can't restart the system
* call.
*/
if (ret == -ERESTARTNOHAND)
ret = -EINTR;
}
}
if (ret == -ERESTARTNOHAND) {
/*
* Don't restore the signal mask yet. Let do_signal() deliver
* the signal on the way back to userspace, before the signal
* mask is restored.
*/
if (sigmask) {
memcpy(&current->saved_sigmask, &sigsaved,
sizeof(sigsaved));
set_thread_flag(TIF_RESTORE_SIGMASK);
}
} else if (sigmask)
sigprocmask(SIG_SETMASK, &sigsaved, NULL);
return ret;
}
/*
* Most architectures can't handle 7-argument syscalls. So we provide a
* 6-argument version where the sixth argument is a pointer to a structure
* which has a pointer to the sigset_t itself followed by a size_t containing
* the sigset size.
*/
asmlinkage long sys_pselect6(int n, fd_set __user *inp, fd_set __user *outp,
fd_set __user *exp, struct timespec __user *tsp, void __user *sig)
{
size_t sigsetsize = 0;
sigset_t __user *up = NULL;
if (sig) {
if (!access_ok(VERIFY_READ, sig, sizeof(void *)+sizeof(size_t))
|| __get_user(up, (sigset_t __user * __user *)sig)
|| __get_user(sigsetsize,
(size_t __user *)(sig+sizeof(void *))))
return -EFAULT;
}
return sys_pselect7(n, inp, outp, exp, tsp, up, sigsetsize);
}
#endif /* TIF_RESTORE_SIGMASK */
struct poll_list {
struct poll_list *next;
int len;
struct pollfd entries[0];
};
#define POLLFD_PER_PAGE ((PAGE_SIZE-sizeof(struct poll_list)) / sizeof(struct pollfd))
static void do_pollfd(unsigned int num, struct pollfd * fdpage,
poll_table ** pwait, int *count)
{
int i;
for (i = 0; i < num; i++) {
int fd;
unsigned int mask;
struct pollfd *fdp;
mask = 0;
fdp = fdpage+i;
fd = fdp->fd;
if (fd >= 0) {
struct file * file = fget(fd);
mask = POLLNVAL;
if (file != NULL) {
mask = DEFAULT_POLLMASK;
if (file->f_op && file->f_op->poll)
mask = file->f_op->poll(file, *pwait);
mask &= fdp->events | POLLERR | POLLHUP;
fput(file);
}
if (mask) {
*pwait = NULL;
(*count)++;
}
}
fdp->revents = mask;
}
}
static int do_poll(unsigned int nfds, struct poll_list *list,
struct poll_wqueues *wait, s64 *timeout)
{
int count = 0;
poll_table* pt = &wait->pt;
/* Optimise the no-wait case */
if (!(*timeout))
pt = NULL;
for (;;) {
struct poll_list *walk;
long __timeout;
set_current_state(TASK_INTERRUPTIBLE);
walk = list;
while(walk != NULL) {
do_pollfd( walk->len, walk->entries, &pt, &count);
walk = walk->next;
}
pt = NULL;
if (count || !*timeout || signal_pending(current))
break;
count = wait->error;
if (count)
break;
if (*timeout < 0) {
/* Wait indefinitely */
__timeout = MAX_SCHEDULE_TIMEOUT;
} else if (unlikely(*timeout >= (s64)MAX_SCHEDULE_TIMEOUT-1)) {
/*
* Wait for longer than MAX_SCHEDULE_TIMEOUT. Do it in
* a loop
*/
__timeout = MAX_SCHEDULE_TIMEOUT - 1;
*timeout -= __timeout;
} else {
__timeout = *timeout;
*timeout = 0;
}
__timeout = schedule_timeout(__timeout);
if (*timeout >= 0)
*timeout += __timeout;
}
__set_current_state(TASK_RUNNING);
return count;
}
#define N_STACK_PPS ((sizeof(stack_pps) - sizeof(struct poll_list)) / \
sizeof(struct pollfd))
int do_sys_poll(struct pollfd __user *ufds, unsigned int nfds, s64 *timeout)
{
struct poll_wqueues table;
int fdcount, err;
unsigned int i;
struct poll_list *head;
struct poll_list *walk;
struct fdtable *fdt;
int max_fdset;
/* Allocate small arguments on the stack to save memory and be faster */
char stack_pps[POLL_STACK_ALLOC];
struct poll_list *stack_pp = NULL;
/* Do a sanity check on nfds ... */
rcu_read_lock();
fdt = files_fdtable(current->files);
max_fdset = fdt->max_fdset;
rcu_read_unlock();
if (nfds > max_fdset && nfds > OPEN_MAX)
return -EINVAL;
poll_initwait(&table);
head = NULL;
walk = NULL;
i = nfds;
err = -ENOMEM;
while(i!=0) {
struct poll_list *pp;
int num, size;
if (stack_pp == NULL)
num = N_STACK_PPS;
else
num = POLLFD_PER_PAGE;
if (num > i)
num = i;
size = sizeof(struct poll_list) + sizeof(struct pollfd)*num;
if (!stack_pp)
stack_pp = pp = (struct poll_list *)stack_pps;
else {
pp = kmalloc(size, GFP_KERNEL);
if (!pp)
goto out_fds;
}
pp->next=NULL;
pp->len = num;
if (head == NULL)
head = pp;
else
walk->next = pp;
walk = pp;
if (copy_from_user(pp->entries, ufds + nfds-i,
sizeof(struct pollfd)*num)) {
err = -EFAULT;
goto out_fds;
}
i -= pp->len;
}
fdcount = do_poll(nfds, head, &table, timeout);
/* OK, now copy the revents fields back to user space. */
walk = head;
err = -EFAULT;
while(walk != NULL) {
struct pollfd *fds = walk->entries;
int j;
for (j=0; j < walk->len; j++, ufds++) {
if(__put_user(fds[j].revents, &ufds->revents))
goto out_fds;
}
walk = walk->next;
}
err = fdcount;
if (!fdcount && signal_pending(current))
err = -EINTR;
out_fds:
walk = head;
while(walk!=NULL) {
struct poll_list *pp = walk->next;
if (walk != stack_pp)
kfree(walk);
walk = pp;
}
poll_freewait(&table);
return err;
}
asmlinkage long sys_poll(struct pollfd __user *ufds, unsigned int nfds,
long timeout_msecs)
{
s64 timeout_jiffies = 0;
if (timeout_msecs) {
#if HZ > 1000
/* We can only overflow if HZ > 1000 */
if (timeout_msecs / 1000 > (s64)0x7fffffffffffffffULL / (s64)HZ)
timeout_jiffies = -1;
else
#endif
timeout_jiffies = msecs_to_jiffies(timeout_msecs);
}
return do_sys_poll(ufds, nfds, &timeout_jiffies);
}
#ifdef TIF_RESTORE_SIGMASK
asmlinkage long sys_ppoll(struct pollfd __user *ufds, unsigned int nfds,
struct timespec __user *tsp, const sigset_t __user *sigmask,
size_t sigsetsize)
{
sigset_t ksigmask, sigsaved;
struct timespec ts;
s64 timeout = -1;
int ret;
if (tsp) {
if (copy_from_user(&ts, tsp, sizeof(ts)))
return -EFAULT;
/* Cast to u64 to make GCC stop complaining */
if ((u64)ts.tv_sec >= (u64)MAX_INT64_SECONDS)
timeout = -1; /* infinite */
else {
timeout = ROUND_UP(ts.tv_nsec, NSEC_PER_SEC/HZ);
timeout += ts.tv_sec * HZ;
}
}
if (sigmask) {
/* XXX: Don't preclude handling different sized sigset_t's. */
if (sigsetsize != sizeof(sigset_t))
return -EINVAL;
if (copy_from_user(&ksigmask, sigmask, sizeof(ksigmask)))
return -EFAULT;
sigdelsetmask(&ksigmask, sigmask(SIGKILL)|sigmask(SIGSTOP));
sigprocmask(SIG_SETMASK, &ksigmask, &sigsaved);
}
ret = do_sys_poll(ufds, nfds, &timeout);
/* We can restart this syscall, usually */
if (ret == -EINTR) {
/*
* Don't restore the signal mask yet. Let do_signal() deliver
* the signal on the way back to userspace, before the signal
* mask is restored.
*/
if (sigmask) {
memcpy(&current->saved_sigmask, &sigsaved,
sizeof(sigsaved));
set_thread_flag(TIF_RESTORE_SIGMASK);
}
ret = -ERESTARTNOHAND;
} else if (sigmask)
sigprocmask(SIG_SETMASK, &sigsaved, NULL);
if (tsp && timeout >= 0) {
struct timespec rts;
if (current->personality & STICKY_TIMEOUTS)
goto sticky;
/* Yes, we know it's actually an s64, but it's also positive. */
rts.tv_nsec = jiffies_to_usecs(do_div((*(u64*)&timeout), HZ)) *
1000;
rts.tv_sec = timeout;
if (timespec_compare(&rts, &ts) >= 0)
rts = ts;
if (copy_to_user(tsp, &rts, sizeof(rts))) {
sticky:
/*
* If an application puts its timeval in read-only
* memory, we don't want the Linux-specific update to
* the timeval to cause a fault after the select has
* completed successfully. However, because we're not
* updating the timeval, we can't restart the system
* call.
*/
if (ret == -ERESTARTNOHAND && timeout >= 0)
ret = -EINTR;
}
}
return ret;
}
#endif /* TIF_RESTORE_SIGMASK */