renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-28 15:13:55 +08:00
Code
702b691e4a
linux-next/arch/arm/boot/dts/at91sam9rl.dtsi
Alexandre Belloni 8dc5d8e8f7 ARM: at91/dt: define at91sam9rl clocks 
Define at91sam9rl clocks in at91sam9rl dtsi file.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris BREZILLON <b.brezillon.dev@gmail.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-03-12 11:30:59 +01:00

803 lines
19 KiB
Plaintext
Raw Blame History

/*
* at91sam9rl.dtsi - Device Tree Include file for AT91SAM9RL family SoC
*
* Copyright (C) 2014 Alexandre Belloni <alexandre.belloni@free-electrons.com>
*
* Licensed under GPLv2 or later.
*/
#include "skeleton.dtsi"
#include <dt-bindings/pinctrl/at91.h>
#include <dt-bindings/clk/at91.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Atmel AT91SAM9RL family SoC";
compatible = "atmel,at91sam9rl", "atmel,at91sam9";
interrupt-parent = <&aic>;
aliases {
serial0 = &dbgu;
serial1 = &usart0;
serial2 = &usart1;
serial3 = &usart2;
serial4 = &usart3;
gpio0 = &pioA;
gpio1 = &pioB;
gpio2 = &pioC;
gpio3 = &pioD;
tcb0 = &tcb0;
i2c0 = &i2c0;
i2c1 = &i2c1;
ssc0 = &ssc0;
ssc1 = &ssc1;
};
cpus {
#address-cells = <0>;
#size-cells = <0>;
cpu {
compatible = "arm,arm926ej-s";
device_type = "cpu";
};
};
memory {
reg = <0x20000000 0x04000000>;
};
ahb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
nand0: nand@40000000 {
compatible = "atmel,at91rm9200-nand";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x40000000 0x10000000>,
<0xffffe800 0x200>;
atmel,nand-addr-offset = <21>;
atmel,nand-cmd-offset = <22>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_nand>;
gpios = <&pioD 17 GPIO_ACTIVE_HIGH>,
<&pioB 6 GPIO_ACTIVE_HIGH>,
<0>;
status = "disabled";
};
apb {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
tcb0: timer@fffa0000 {
compatible = "atmel,at91rm9200-tcb";
reg = <0xfffa0000 0x100>;
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 0>,
<17 IRQ_TYPE_LEVEL_HIGH 0>,
<18 IRQ_TYPE_LEVEL_HIGH 0>;
clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>;
clock-names = "t0_clk", "t1_clk", "t2_clk";
};
mmc0: mmc@fffa4000 {
compatible = "atmel,hsmci";
reg = <0xfffa4000 0x600>;
interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
clocks = <&mci0_clk>;
clock-names = "mci_clk";
status = "disabled";
};
i2c0: i2c@fffa8000 {
compatible = "atmel,at91sam9260-i2c";
reg = <0xfffa8000 0x100>;
interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>;
#address-cells = <1>;
#size-cells = <0>;
clocks = <&twi0_clk>;
status = "disabled";
};
i2c1: i2c@fffac000 {
compatible = "atmel,at91sam9260-i2c";
reg = <0xfffac000 0x100>;
interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
usart0: serial@fffb0000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffb0000 0x200>;
interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0>;
clocks = <&usart0_clk>;
clock-names = "usart";
status = "disabled";
};
usart1: serial@fffb4000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffb4000 0x200>;
interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1>;
clocks = <&usart1_clk>;
clock-names = "usart";
status = "disabled";
};
usart2: serial@fffb8000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffb8000 0x200>;
interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2>;
clocks = <&usart2_clk>;
clock-names = "usart";
status = "disabled";
};
usart3: serial@fffbc000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffbc000 0x200>;
interrupts = <9 IRQ_TYPE_LEVEL_HIGH 5>;
atmel,use-dma-rx;
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart3>;
clocks = <&usart3_clk>;
clock-names = "usart";
status = "disabled";
};
ssc0: ssc@fffc0000 {
compatible = "atmel,at91rm9200-ssc";
reg = <0xfffc0000 0x4000>;
interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled";
};
ssc1: ssc@fffc4000 {
compatible = "atmel,at91rm9200-ssc";
reg = <0xfffc4000 0x4000>;
interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
status = "disabled";
};
spi0: spi@fffcc000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "atmel,at91rm9200-spi";
reg = <0xfffcc000 0x200>;
interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
clocks = <&spi0_clk>;
clock-names = "spi_clk";
status = "disabled";
};
ramc0: ramc@ffffea00 {
compatible = "atmel,at91sam9260-sdramc";
reg = <0xffffea00 0x200>;
};
aic: interrupt-controller@fffff000 {
#interrupt-cells = <3>;
compatible = "atmel,at91rm9200-aic";
interrupt-controller;
reg = <0xfffff000 0x200>;
atmel,external-irqs = <31>;
};
dbgu: serial@fffff200 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
clocks = <&mck>;
clock-names = "usart";
status = "disabled";
};
pinctrl@fffff400 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
ranges = <0xfffff400 0xfffff400 0x800>;
atmel,mux-mask =
/* A B */
<0xffffffff 0xe05c6738>, /* pioA */
<0xffffffff 0x0000c780>, /* pioB */
<0xffffffff 0xe3ffff0e>, /* pioC */
<0x003fffff 0x0001ff3c>; /* pioD */
/* shared pinctrl settings */
dbgu {
pinctrl_dbgu: dbgu-0 {
atmel,pins =
<AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>,
<AT91_PIOA 22 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
};
i2c_gpio0 {
pinctrl_i2c_gpio0: i2c_gpio0-0 {
atmel,pins =
<AT91_PIOA 23 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>,
<AT91_PIOA 24 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
};
};
i2c_gpio1 {
pinctrl_i2c_gpio1: i2c_gpio1-0 {
atmel,pins =
<AT91_PIOD 10 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>,
<AT91_PIOD 11 AT91_PERIPH_GPIO AT91_PINCTRL_MULTI_DRIVE>;
};
};
mmc0 {
pinctrl_mmc0_clk: mmc0_clk-0 {
atmel,pins =
<AT91_PIOA 2 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
atmel,pins =
<AT91_PIOA 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
<AT91_PIOA 1 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
atmel,pins =
<AT91_PIOA 3 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
<AT91_PIOA 4 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
<AT91_PIOA 5 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
};
nand {
pinctrl_nand: nand-0 {
atmel,pins =
<AT91_PIOD 17 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>,
<AT91_PIOB 6 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
};
pinctrl_nand0_ale_cle: nand_ale_cle-0 {
atmel,pins =
<AT91_PIOB 2 AT91_PERIPH_A AT91_PINCTRL_NONE>,
<AT91_PIOB 3 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
pinctrl_nand0_oe_we: nand_oe_we-0 {
atmel,pins =
<AT91_PIOB 4 AT91_PERIPH_A AT91_PINCTRL_NONE>,
<AT91_PIOB 5 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
pinctrl_nand0_cs: nand_cs-0 {
atmel,pins =
<AT91_PIOB 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
};
ssc0 {
pinctrl_ssc0_tx: ssc0_tx-0 {
atmel,pins =
<AT91_PIOA 15 AT91_PERIPH_A AT91_PINCTRL_NONE>,
<AT91_PIOC 0 AT91_PERIPH_A AT91_PINCTRL_NONE>,
<AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
pinctrl_ssc0_rx: ssc0_rx-0 {
atmel,pins =
<AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE>,
<AT91_PIOA 16 AT91_PERIPH_A AT91_PINCTRL_NONE>,
<AT91_PIOA 22 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
};
ssc1 {
pinctrl_ssc1_tx: ssc1_tx-0 {
atmel,pins =
<AT91_PIOA 13 AT91_PERIPH_B AT91_PINCTRL_NONE>,
<AT91_PIOA 29 AT91_PERIPH_B AT91_PINCTRL_NONE>,
<AT91_PIOA 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_ssc1_rx: ssc1_rx-0 {
atmel,pins =
<AT91_PIOA 8 AT91_PERIPH_B AT91_PINCTRL_NONE>,
<AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE>,
<AT91_PIOA 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
};
spi0 {
pinctrl_spi0: spi0-0 {
atmel,pins =
<AT91_PIOA 25 AT91_PERIPH_A AT91_PINCTRL_NONE>,
<AT91_PIOA 26 AT91_PERIPH_A AT91_PINCTRL_NONE>,
<AT91_PIOA 27 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
};
tcb0 {
pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
atmel,pins = <AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
atmel,pins = <AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
atmel,pins = <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
atmel,pins = <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
atmel,pins = <AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
atmel,pins = <AT91_PIOD 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
atmel,pins = <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
atmel,pins = <AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
atmel,pins = <AT91_PIOD 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
};
usart0 {
pinctrl_usart0: usart0-0 {
atmel,pins =
<AT91_PIOA 6 AT91_PERIPH_A AT91_PINCTRL_NONE>,
<AT91_PIOA 7 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>;
};
pinctrl_usart0_rts: usart0_rts-0 {
atmel,pins =
<AT91_PIOA 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
pinctrl_usart0_cts: usart0_cts-0 {
atmel,pins =
<AT91_PIOA 10 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 {
atmel,pins =
<AT91_PIOD 14 AT91_PERIPH_A AT91_PINCTRL_NONE>,
<AT91_PIOD 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
pinctrl_usart0_dcd: usart0_dcd-0 {
atmel,pins =
<AT91_PIOD 16 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
pinctrl_usart0_ri: usart0_ri-0 {
atmel,pins =
<AT91_PIOD 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
pinctrl_usart0_sck: usart0_sck-0 {
atmel,pins =
<AT91_PIOA 8 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
};
usart1 {
pinctrl_usart1: usart1-0 {
atmel,pins =
<AT91_PIOA 11 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
<AT91_PIOA 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
pinctrl_usart1_rts: usart1_rts-0 {
atmel,pins =
<AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_usart1_cts: usart1_cts-0 {
atmel,pins =
<AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_usart1_sck: usart1_sck-0 {
atmel,pins =
<AT91_PIOD 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
};
usart2 {
pinctrl_usart2: usart2-0 {
atmel,pins =
<AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
<AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
pinctrl_usart2_rts: usart2_rts-0 {
atmel,pins =
<AT91_PIOA 29 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
pinctrl_usart2_cts: usart2_cts-0 {
atmel,pins =
<AT91_PIOA 30 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
pinctrl_usart2_sck: usart2_sck-0 {
atmel,pins =
<AT91_PIOD 9 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
};
usart3 {
pinctrl_usart3: usart3-0 {
atmel,pins =
<AT91_PIOB 0 AT91_PERIPH_A AT91_PINCTRL_PULL_UP>,
<AT91_PIOB 1 AT91_PERIPH_A AT91_PINCTRL_NONE>;
};
pinctrl_usart3_rts: usart3_rts-0 {
atmel,pins =
<AT91_PIOD 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_usart3_cts: usart3_cts-0 {
atmel,pins =
<AT91_PIOD 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
pinctrl_usart3_sck: usart3_sck-0 {
atmel,pins =
<AT91_PIOA 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
};
};
pioA: gpio@fffff400 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
interrupts = <2 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pioA_clk>;
};
pioB: gpio@fffff600 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff600 0x200>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pioB_clk>;
};
pioC: gpio@fffff800 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff800 0x200>;
interrupts = <4 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pioC_clk>;
};
pioD: gpio@fffffa00 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffffa00 0x200>;
interrupts = <5 IRQ_TYPE_LEVEL_HIGH 1>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&pioD_clk>;
};
};
pmc: pmc@fffffc00 {
compatible = "atmel,at91sam9g45-pmc";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
interrupt-controller;
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
clk32k: slck {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
};
main: mainck {
compatible = "atmel,at91rm9200-clk-main";
#clock-cells = <0>;
interrupts-extended = <&pmc AT91_PMC_MOSCS>;
clocks = <&clk32k>;
};
plla: pllack {
compatible = "atmel,at91rm9200-clk-pll";
#clock-cells = <0>;
interrupts-extended = <&pmc AT91_PMC_LOCKA>;
clocks = <&main>;
reg = <0>;
atmel,clk-input-range = <1000000 32000000>;
#atmel,pll-clk-output-range-cells = <4>;
atmel,pll-clk-output-ranges = <80000000 200000000 190000000 240000000>;
};
utmi: utmick {
compatible = "atmel,at91sam9x5-clk-utmi";
#clock-cells = <0>;
interrupt-parent = <&pmc>;
interrupts = <AT91_PMC_LOCKU>;
clocks = <&main>;
};
mck: masterck {
compatible = "atmel,at91rm9200-clk-master";
#clock-cells = <0>;
interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
clocks = <&clk32k>, <&main>, <&plla>, <&utmi>;
atmel,clk-output-range = <0 94000000>;
atmel,clk-divisors = <1 2 4 3>;
};
prog: progck {
compatible = "atmel,at91rm9200-clk-programmable";
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <&pmc>;
clocks = <&clk32k>, <&main>, <&plla>, <&utmi>, <&mck>;
prog0: prog0 {
#clock-cells = <0>;
reg = <0>;
interrupts = <AT91_PMC_PCKRDY(0)>;
};
prog1: prog1 {
#clock-cells = <0>;
reg = <1>;
interrupts = <AT91_PMC_PCKRDY(1)>;
};
};
systemck {
compatible = "atmel,at91rm9200-clk-system";
#address-cells = <1>;
#size-cells = <0>;
pck0: pck0 {
#clock-cells = <0>;
reg = <8>;
clocks = <&prog0>;
};
pck1: pck1 {
#clock-cells = <0>;
reg = <9>;
clocks = <&prog1>;
};
};
periphck {
compatible = "atmel,at91rm9200-clk-peripheral";
#address-cells = <1>;
#size-cells = <0>;
clocks = <&mck>;
pioA_clk: pioA_clk {
#clock-cells = <0>;
reg = <2>;
};
pioB_clk: pioB_clk {
#clock-cells = <0>;
reg = <3>;
};
pioC_clk: pioC_clk {
#clock-cells = <0>;
reg = <4>;
};
pioD_clk: pioD_clk {
#clock-cells = <0>;
reg = <5>;
};
usart0_clk: usart0_clk {
#clock-cells = <0>;
reg = <6>;
};
usart1_clk: usart1_clk {
#clock-cells = <0>;
reg = <7>;
};
usart2_clk: usart2_clk {
#clock-cells = <0>;
reg = <8>;
};
usart3_clk: usart3_clk {
#clock-cells = <0>;
reg = <9>;
};
mci0_clk: mci0_clk {
#clock-cells = <0>;
reg = <10>;
};
twi0_clk: twi0_clk {
#clock-cells = <0>;
reg = <11>;
};
twi1_clk: twi1_clk {
#clock-cells = <0>;
reg = <12>;
};
spi0_clk: spi0_clk {
#clock-cells = <0>;
reg = <13>;
};
ssc0_clk: ssc0_clk {
#clock-cells = <0>;
reg = <14>;
};
ssc1_clk: ssc1_clk {
#clock-cells = <0>;
reg = <15>;
};
tc0_clk: tc0_clk {
#clock-cells = <0>;
reg = <16>;
};
tc1_clk: tc1_clk {
#clock-cells = <0>;
reg = <17>;
};
tc2_clk: tc2_clk {
#clock-cells = <0>;
reg = <18>;
};
pwm_clk: pwm_clk {
#clock-cells = <0>;
reg = <19>;
};
adc_clk: adc_clk {
#clock-cells = <0>;
reg = <20>;
};
dma0_clk: dma0_clk {
#clock-cells = <0>;
reg = <21>;
};
udphs_clk: udphs_clk {
#clock-cells = <0>;
reg = <22>;
};
lcd_clk: lcd_clk {
#clock-cells = <0>;
reg = <23>;
};
};
};
rstc@fffffd00 {
compatible = "atmel,at91sam9260-rstc";
reg = <0xfffffd00 0x10>;
};
shdwc@fffffd10 {
compatible = "atmel,at91sam9260-shdwc";
reg = <0xfffffd10 0x10>;
};
pit: timer@fffffd30 {
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffd30 0xf>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
clocks = <&mck>;
};
watchdog@fffffd40 {
compatible = "atmel,at91sam9260-wdt";
reg = <0xfffffd40 0x10>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
status = "disabled";
};
};
};
i2c@0 {
compatible = "i2c-gpio";
gpios = <&pioA 23 GPIO_ACTIVE_HIGH>, /* sda */
<&pioA 24 GPIO_ACTIVE_HIGH>; /* scl */
i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain;
i2c-gpio,delay-us = <2>; /* ~100 kHz */
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c_gpio0>;
status = "disabled";
};
i2c@1 {
compatible = "i2c-gpio";
gpios = <&pioD 10 GPIO_ACTIVE_HIGH>, /* sda */
<&pioD 11 GPIO_ACTIVE_HIGH>; /* scl */
i2c-gpio,sda-open-drain;
i2c-gpio,scl-open-drain;
i2c-gpio,delay-us = <2>; /* ~100 kHz */
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c_gpio1>;
status = "disabled";
};
};
View Git Blame Copy Permalink