2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-29 23:53:55 +08:00
linux-next/drivers/input/misc/gp2ap002a00f.c
Jingoo Han c838cb3d47 Input: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead
of accessing dev->platform_data directly. This is a cosmetic change
to make the code simpler and enhance the readability.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Fugang Duan <B38611@freescale.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-12-06 02:06:29 -08:00

289 lines
6.0 KiB
C

/*
* Copyright (C) 2011 Sony Ericsson Mobile Communications Inc.
*
* Author: Courtney Cavin <courtney.cavin@sonyericsson.com>
* Prepared for up-stream by: Oskar Andero <oskar.andero@sonyericsson.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2, as
* published by the Free Software Foundation.
*/
#include <linux/i2c.h>
#include <linux/irq.h>
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/input/gp2ap002a00f.h>
struct gp2a_data {
struct input_dev *input;
const struct gp2a_platform_data *pdata;
struct i2c_client *i2c_client;
};
enum gp2a_addr {
GP2A_ADDR_PROX = 0x0,
GP2A_ADDR_GAIN = 0x1,
GP2A_ADDR_HYS = 0x2,
GP2A_ADDR_CYCLE = 0x3,
GP2A_ADDR_OPMOD = 0x4,
GP2A_ADDR_CON = 0x6
};
enum gp2a_controls {
/* Software Shutdown control: 0 = shutdown, 1 = normal operation */
GP2A_CTRL_SSD = 0x01
};
static int gp2a_report(struct gp2a_data *dt)
{
int vo = gpio_get_value(dt->pdata->vout_gpio);
input_report_switch(dt->input, SW_FRONT_PROXIMITY, !vo);
input_sync(dt->input);
return 0;
}
static irqreturn_t gp2a_irq(int irq, void *handle)
{
struct gp2a_data *dt = handle;
gp2a_report(dt);
return IRQ_HANDLED;
}
static int gp2a_enable(struct gp2a_data *dt)
{
return i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_OPMOD,
GP2A_CTRL_SSD);
}
static int gp2a_disable(struct gp2a_data *dt)
{
return i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_OPMOD,
0x00);
}
static int gp2a_device_open(struct input_dev *dev)
{
struct gp2a_data *dt = input_get_drvdata(dev);
int error;
error = gp2a_enable(dt);
if (error < 0) {
dev_err(&dt->i2c_client->dev,
"unable to activate, err %d\n", error);
return error;
}
gp2a_report(dt);
return 0;
}
static void gp2a_device_close(struct input_dev *dev)
{
struct gp2a_data *dt = input_get_drvdata(dev);
int error;
error = gp2a_disable(dt);
if (error < 0)
dev_err(&dt->i2c_client->dev,
"unable to deactivate, err %d\n", error);
}
static int gp2a_initialize(struct gp2a_data *dt)
{
int error;
error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_GAIN,
0x08);
if (error < 0)
return error;
error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_HYS,
0xc2);
if (error < 0)
return error;
error = i2c_smbus_write_byte_data(dt->i2c_client, GP2A_ADDR_CYCLE,
0x04);
if (error < 0)
return error;
error = gp2a_disable(dt);
return error;
}
static int gp2a_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
const struct gp2a_platform_data *pdata = dev_get_platdata(&client->dev);
struct gp2a_data *dt;
int error;
if (!pdata)
return -EINVAL;
if (pdata->hw_setup) {
error = pdata->hw_setup(client);
if (error < 0)
return error;
}
error = gpio_request_one(pdata->vout_gpio, GPIOF_IN, GP2A_I2C_NAME);
if (error)
goto err_hw_shutdown;
dt = kzalloc(sizeof(struct gp2a_data), GFP_KERNEL);
if (!dt) {
error = -ENOMEM;
goto err_free_gpio;
}
dt->pdata = pdata;
dt->i2c_client = client;
error = gp2a_initialize(dt);
if (error < 0)
goto err_free_mem;
dt->input = input_allocate_device();
if (!dt->input) {
error = -ENOMEM;
goto err_free_mem;
}
input_set_drvdata(dt->input, dt);
dt->input->open = gp2a_device_open;
dt->input->close = gp2a_device_close;
dt->input->name = GP2A_I2C_NAME;
dt->input->id.bustype = BUS_I2C;
dt->input->dev.parent = &client->dev;
input_set_capability(dt->input, EV_SW, SW_FRONT_PROXIMITY);
error = request_threaded_irq(client->irq, NULL, gp2a_irq,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING |
IRQF_ONESHOT,
GP2A_I2C_NAME, dt);
if (error) {
dev_err(&client->dev, "irq request failed\n");
goto err_free_input_dev;
}
error = input_register_device(dt->input);
if (error) {
dev_err(&client->dev, "device registration failed\n");
goto err_free_irq;
}
device_init_wakeup(&client->dev, pdata->wakeup);
i2c_set_clientdata(client, dt);
return 0;
err_free_irq:
free_irq(client->irq, dt);
err_free_input_dev:
input_free_device(dt->input);
err_free_mem:
kfree(dt);
err_free_gpio:
gpio_free(pdata->vout_gpio);
err_hw_shutdown:
if (pdata->hw_shutdown)
pdata->hw_shutdown(client);
return error;
}
static int gp2a_remove(struct i2c_client *client)
{
struct gp2a_data *dt = i2c_get_clientdata(client);
const struct gp2a_platform_data *pdata = dt->pdata;
device_init_wakeup(&client->dev, false);
free_irq(client->irq, dt);
input_unregister_device(dt->input);
kfree(dt);
gpio_free(pdata->vout_gpio);
if (pdata->hw_shutdown)
pdata->hw_shutdown(client);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int gp2a_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct gp2a_data *dt = i2c_get_clientdata(client);
int retval = 0;
if (device_may_wakeup(&client->dev)) {
enable_irq_wake(client->irq);
} else {
mutex_lock(&dt->input->mutex);
if (dt->input->users)
retval = gp2a_disable(dt);
mutex_unlock(&dt->input->mutex);
}
return retval;
}
static int gp2a_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct gp2a_data *dt = i2c_get_clientdata(client);
int retval = 0;
if (device_may_wakeup(&client->dev)) {
disable_irq_wake(client->irq);
} else {
mutex_lock(&dt->input->mutex);
if (dt->input->users)
retval = gp2a_enable(dt);
mutex_unlock(&dt->input->mutex);
}
return retval;
}
#endif
static SIMPLE_DEV_PM_OPS(gp2a_pm, gp2a_suspend, gp2a_resume);
static const struct i2c_device_id gp2a_i2c_id[] = {
{ GP2A_I2C_NAME, 0 },
{ }
};
static struct i2c_driver gp2a_i2c_driver = {
.driver = {
.name = GP2A_I2C_NAME,
.owner = THIS_MODULE,
.pm = &gp2a_pm,
},
.probe = gp2a_probe,
.remove = gp2a_remove,
.id_table = gp2a_i2c_id,
};
module_i2c_driver(gp2a_i2c_driver);
MODULE_AUTHOR("Courtney Cavin <courtney.cavin@sonyericsson.com>");
MODULE_DESCRIPTION("Sharp GP2AP002A00F I2C Proximity/Opto sensor driver");
MODULE_LICENSE("GPL v2");