mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-22 20:23:57 +08:00
6f28c2964b
DSI supports interleaving of command mode packets during the HSA, HFP, HBP and BLLP blanking intervals in a video mode stream. This is useful as a user may want to read or change the configuration of a panel without stopping the video stream. On OMAP DSI, we can queue HS or LP command mode packets in the TX FIFO, and the DSI HW takes care of interleaving this data during the one of the blanking intervals. The DSI HW needs to be programmed with the maximum amount of data that can be interleaved in a particular blanking period. A blanking period cannot be used to send command mode data for it's complete duration, there is some amount of time required for the DSI data and clock lanes to transition to the desired LP or HS state. Based on the state of the lanes at the beginning and end of the blanking period, we have different scenarios, with each scenario having a different value of time required to transition to HS or LP. Refer to the section 'Interleaving Mode' in OMAP TRM for more info on the scenarios and the equations to calculate the time required for HS or LP transitions. We use the scenarios which takes the maximum time for HS or LP transition, this gives us the minimum amount of time that can be used to interleave command mode data. The amount of data that can be sent during this minimum time is calculated for command mode packets both in LP and HS. These are written to the registers DSI_VM_TIMING4 to DSI_VM_TIMING6. The calculations don't take into account the time required of transmitting BTA when doing a DSI read, or verifying if a DSI write went through correctly. Until these latencies aren't considered, the behaviour of DSI is unpredictable when a BTA is interleaved during a blanking period. Enhancement of these calculations is a TODO item. The calculations are derived from DSI parameter calculation tools written by Sebastien Fagard <s-fagard@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> |
||
|---|---|---|
| .. | ||
| displays | ||
| dss | ||
| omapfb | ||
| Kconfig | ||
| Makefile | ||
| vram.c | ||
| vrfb.c | ||