2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 14:43:58 +08:00
linux-next/drivers/i2c
Peter Rosin 6ef91fcca8 i2c: mux: relax locking of the top i2c adapter during mux-locked muxing
With a i2c topology like the following

                       GPIO ---|  ------ BAT1
                        |      v /
   I2C  -----+----------+---- MUX
             |                   \
           EEPROM                 ------ BAT2

there is a locking problem with the GPIO controller since it is a client
on the same i2c bus that it muxes. Transfers to the mux clients (e.g. BAT1)
will lock the whole i2c bus prior to attempting to switch the mux to the
correct i2c segment. In the above case, the GPIO device is an I/O expander
with an i2c interface, and since the GPIO subsystem knows nothing (and
rightfully so) about the lockless needs of the i2c mux code, this results
in a deadlock when the GPIO driver issues i2c transfers to modify the
mux.

So, observing that while it is needed to have the i2c bus locked during the
actual MUX update in order to avoid random garbage on the slave side, it
is not strictly a must to have it locked over the whole sequence of a full
select-transfer-deselect mux client operation. The mux itself needs to be
locked, so transfers to clients behind the mux are serialized, and the mux
needs to be stable during all i2c traffic (otherwise individual mux slave
segments might see garbage, or worse).

Introduce this new locking concept as "mux-locked" muxes, and call the
pre-existing mux locking scheme "parent-locked".

Modify the i2c mux locking so that muxes that are "mux-locked" locks only
the muxes on the parent adapter instead of the whole i2c bus when there is
a transfer to the slave side of the mux. This lock serializes transfers to
the slave side of the muxes on the parent adapter.

Add code to i2c-mux-gpio and i2c-mux-pinctrl that checks if all involved
gpio/pinctrl devices have a parent that is an i2c adapter in the same
adapter tree that is muxed, and request a "mux-locked mux" if that is the
case.

Modify the select-transfer-deselect code for "mux-locked" muxes so
that each of the select-transfer-deselect ops locks the mux parent
adapter individually.

Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-05-04 22:39:17 +02:00
..
algos i2c: algo-bit: add I2C_AQ_NO_CLK_STRETCH 2015-11-30 18:37:25 +01:00
busses i2c: uniphier: add "\n" at the end of error log 2016-04-27 19:09:04 +02:00
muxes i2c: mux: relax locking of the top i2c adapter during mux-locked muxing 2016-05-04 22:39:17 +02:00
i2c-boardinfo.c i2c: i2c-boardinfo: sort includes 2016-02-20 23:33:38 +01:00
i2c-core.c i2c: mux: relax locking of the top i2c adapter during mux-locked muxing 2016-05-04 22:39:17 +02:00
i2c-core.h i2c: remove FSF address 2014-11-07 18:35:33 +01:00
i2c-dev.c i2c: i2c-dev: sort includes 2016-02-20 23:33:38 +01:00
i2c-mux.c i2c: mux: relax locking of the top i2c adapter during mux-locked muxing 2016-05-04 22:39:17 +02:00
i2c-slave-eeprom.c i2c: Drop owner assignment from i2c_driver 2015-08-10 08:37:35 +02:00
i2c-smbus.c i2c: i2c-smbus: sort includes 2016-02-20 23:33:39 +01:00
i2c-stub.c i2c: i2c-stub: sort includes 2016-02-20 23:33:39 +01:00
Kconfig kconfig: use bool instead of boolean for type definition attributes 2015-01-07 13:08:04 +01:00
Makefile i2c: slave-eeprom: add eeprom simulator driver 2014-12-11 22:25:54 +01:00