renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-24 05:04:00 +08:00
Code
6e877fedb1
linux-next/drivers/iio/magnetometer/st_magn_core.c
Linus Walleij ea7e586bdd iio: st_sensors: move regulator retrieveal to core 
Currently the pressure sensor has code to retrieve and enable two
regulators for Vdd and Vdd IO, but actually these voltage inputs
are found on all of these ST sensors, so move the regulator
handling to the core and make sure all the ST sensors call these
functions on probe() and remove() to enable/disable power.

Here also mover over to obtaining the regulator from the *parent*
device of the IIO device, as the IIO device is created on-the-fly
in this very subsystem it very unlikely evert have any regulators
attached to it whatsoever. It is much more likely that the parent
is a platform device, possibly instantiated from a device tree,
which in turn have Vdd and Vdd IO supplied assigned to it.

Cc: Lee Jones <lee.jones@linaro.org>
Cc: Denis CIOCCA <denis.ciocca@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-04-26 11:52:42 +01:00

424 lines
12 KiB
C
Raw Blame History

/*
* STMicroelectronics magnetometers driver
*
* Copyright 2012-2013 STMicroelectronics Inc.
*
* Denis Ciocca <denis.ciocca@st.com>
*
* Licensed under the GPL-2.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/mutex.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/buffer.h>
#include <linux/iio/common/st_sensors.h>
#include "st_magn.h"
#define ST_MAGN_NUMBER_DATA_CHANNELS 3
/* DEFAULT VALUE FOR SENSORS */
#define ST_MAGN_DEFAULT_OUT_X_H_ADDR 0X03
#define ST_MAGN_DEFAULT_OUT_Y_H_ADDR 0X07
#define ST_MAGN_DEFAULT_OUT_Z_H_ADDR 0X05
/* FULLSCALE */
#define ST_MAGN_FS_AVL_1300MG 1300
#define ST_MAGN_FS_AVL_1900MG 1900
#define ST_MAGN_FS_AVL_2500MG 2500
#define ST_MAGN_FS_AVL_4000MG 4000
#define ST_MAGN_FS_AVL_4700MG 4700
#define ST_MAGN_FS_AVL_5600MG 5600
#define ST_MAGN_FS_AVL_8000MG 8000
#define ST_MAGN_FS_AVL_8100MG 8100
#define ST_MAGN_FS_AVL_10000MG 10000
/* CUSTOM VALUES FOR SENSOR 1 */
#define ST_MAGN_1_WAI_EXP 0x3c
#define ST_MAGN_1_ODR_ADDR 0x00
#define ST_MAGN_1_ODR_MASK 0x1c
#define ST_MAGN_1_ODR_AVL_1HZ_VAL 0x00
#define ST_MAGN_1_ODR_AVL_2HZ_VAL 0x01
#define ST_MAGN_1_ODR_AVL_3HZ_VAL 0x02
#define ST_MAGN_1_ODR_AVL_8HZ_VAL 0x03
#define ST_MAGN_1_ODR_AVL_15HZ_VAL 0x04
#define ST_MAGN_1_ODR_AVL_30HZ_VAL 0x05
#define ST_MAGN_1_ODR_AVL_75HZ_VAL 0x06
#define ST_MAGN_1_ODR_AVL_220HZ_VAL 0x07
#define ST_MAGN_1_PW_ADDR 0x02
#define ST_MAGN_1_PW_MASK 0x03
#define ST_MAGN_1_PW_ON 0x00
#define ST_MAGN_1_PW_OFF 0x03
#define ST_MAGN_1_FS_ADDR 0x01
#define ST_MAGN_1_FS_MASK 0xe0
#define ST_MAGN_1_FS_AVL_1300_VAL 0x01
#define ST_MAGN_1_FS_AVL_1900_VAL 0x02
#define ST_MAGN_1_FS_AVL_2500_VAL 0x03
#define ST_MAGN_1_FS_AVL_4000_VAL 0x04
#define ST_MAGN_1_FS_AVL_4700_VAL 0x05
#define ST_MAGN_1_FS_AVL_5600_VAL 0x06
#define ST_MAGN_1_FS_AVL_8100_VAL 0x07
#define ST_MAGN_1_FS_AVL_1300_GAIN_XY 1100
#define ST_MAGN_1_FS_AVL_1900_GAIN_XY 855
#define ST_MAGN_1_FS_AVL_2500_GAIN_XY 670
#define ST_MAGN_1_FS_AVL_4000_GAIN_XY 450
#define ST_MAGN_1_FS_AVL_4700_GAIN_XY 400
#define ST_MAGN_1_FS_AVL_5600_GAIN_XY 330
#define ST_MAGN_1_FS_AVL_8100_GAIN_XY 230
#define ST_MAGN_1_FS_AVL_1300_GAIN_Z 980
#define ST_MAGN_1_FS_AVL_1900_GAIN_Z 760
#define ST_MAGN_1_FS_AVL_2500_GAIN_Z 600
#define ST_MAGN_1_FS_AVL_4000_GAIN_Z 400
#define ST_MAGN_1_FS_AVL_4700_GAIN_Z 355
#define ST_MAGN_1_FS_AVL_5600_GAIN_Z 295
#define ST_MAGN_1_FS_AVL_8100_GAIN_Z 205
#define ST_MAGN_1_MULTIREAD_BIT false
/* CUSTOM VALUES FOR SENSOR 2 */
#define ST_MAGN_2_WAI_EXP 0x3d
#define ST_MAGN_2_ODR_ADDR 0x20
#define ST_MAGN_2_ODR_MASK 0x1c
#define ST_MAGN_2_ODR_AVL_1HZ_VAL 0x00
#define ST_MAGN_2_ODR_AVL_2HZ_VAL 0x01
#define ST_MAGN_2_ODR_AVL_3HZ_VAL 0x02
#define ST_MAGN_2_ODR_AVL_5HZ_VAL 0x03
#define ST_MAGN_2_ODR_AVL_10HZ_VAL 0x04
#define ST_MAGN_2_ODR_AVL_20HZ_VAL 0x05
#define ST_MAGN_2_ODR_AVL_40HZ_VAL 0x06
#define ST_MAGN_2_ODR_AVL_80HZ_VAL 0x07
#define ST_MAGN_2_PW_ADDR 0x22
#define ST_MAGN_2_PW_MASK 0x03
#define ST_MAGN_2_PW_ON 0x00
#define ST_MAGN_2_PW_OFF 0x03
#define ST_MAGN_2_FS_ADDR 0x21
#define ST_MAGN_2_FS_MASK 0x60
#define ST_MAGN_2_FS_AVL_4000_VAL 0x00
#define ST_MAGN_2_FS_AVL_8000_VAL 0x01
#define ST_MAGN_2_FS_AVL_10000_VAL 0x02
#define ST_MAGN_2_FS_AVL_4000_GAIN 430
#define ST_MAGN_2_FS_AVL_8000_GAIN 230
#define ST_MAGN_2_FS_AVL_10000_GAIN 230
#define ST_MAGN_2_MULTIREAD_BIT false
#define ST_MAGN_2_OUT_X_L_ADDR 0x28
#define ST_MAGN_2_OUT_Y_L_ADDR 0x2a
#define ST_MAGN_2_OUT_Z_L_ADDR 0x2c
static const struct iio_chan_spec st_magn_16bit_channels[] = {
ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_BE, 16, 16,
ST_MAGN_DEFAULT_OUT_X_H_ADDR),
ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_BE, 16, 16,
ST_MAGN_DEFAULT_OUT_Y_H_ADDR),
ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_BE, 16, 16,
ST_MAGN_DEFAULT_OUT_Z_H_ADDR),
IIO_CHAN_SOFT_TIMESTAMP(3)
};
static const struct iio_chan_spec st_magn_2_16bit_channels[] = {
ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16,
ST_MAGN_2_OUT_X_L_ADDR),
ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16,
ST_MAGN_2_OUT_Y_L_ADDR),
ST_SENSORS_LSM_CHANNELS(IIO_MAGN,
BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16,
ST_MAGN_2_OUT_Z_L_ADDR),
IIO_CHAN_SOFT_TIMESTAMP(3)
};
static const struct st_sensors st_magn_sensors[] = {
{
.wai = ST_MAGN_1_WAI_EXP,
.sensors_supported = {
[0] = LSM303DLHC_MAGN_DEV_NAME,
[1] = LSM303DLM_MAGN_DEV_NAME,
},
.ch = (struct iio_chan_spec *)st_magn_16bit_channels,
.odr = {
.addr = ST_MAGN_1_ODR_ADDR,
.mask = ST_MAGN_1_ODR_MASK,
.odr_avl = {
{ 1, ST_MAGN_1_ODR_AVL_1HZ_VAL, },
{ 2, ST_MAGN_1_ODR_AVL_2HZ_VAL, },
{ 3, ST_MAGN_1_ODR_AVL_3HZ_VAL, },
{ 8, ST_MAGN_1_ODR_AVL_8HZ_VAL, },
{ 15, ST_MAGN_1_ODR_AVL_15HZ_VAL, },
{ 30, ST_MAGN_1_ODR_AVL_30HZ_VAL, },
{ 75, ST_MAGN_1_ODR_AVL_75HZ_VAL, },
{ 220, ST_MAGN_1_ODR_AVL_220HZ_VAL, },
},
},
.pw = {
.addr = ST_MAGN_1_PW_ADDR,
.mask = ST_MAGN_1_PW_MASK,
.value_on = ST_MAGN_1_PW_ON,
.value_off = ST_MAGN_1_PW_OFF,
},
.fs = {
.addr = ST_MAGN_1_FS_ADDR,
.mask = ST_MAGN_1_FS_MASK,
.fs_avl = {
[0] = {
.num = ST_MAGN_FS_AVL_1300MG,
.value = ST_MAGN_1_FS_AVL_1300_VAL,
.gain = ST_MAGN_1_FS_AVL_1300_GAIN_XY,
.gain2 = ST_MAGN_1_FS_AVL_1300_GAIN_Z,
},
[1] = {
.num = ST_MAGN_FS_AVL_1900MG,
.value = ST_MAGN_1_FS_AVL_1900_VAL,
.gain = ST_MAGN_1_FS_AVL_1900_GAIN_XY,
.gain2 = ST_MAGN_1_FS_AVL_1900_GAIN_Z,
},
[2] = {
.num = ST_MAGN_FS_AVL_2500MG,
.value = ST_MAGN_1_FS_AVL_2500_VAL,
.gain = ST_MAGN_1_FS_AVL_2500_GAIN_XY,
.gain2 = ST_MAGN_1_FS_AVL_2500_GAIN_Z,
},
[3] = {
.num = ST_MAGN_FS_AVL_4000MG,
.value = ST_MAGN_1_FS_AVL_4000_VAL,
.gain = ST_MAGN_1_FS_AVL_4000_GAIN_XY,
.gain2 = ST_MAGN_1_FS_AVL_4000_GAIN_Z,
},
[4] = {
.num = ST_MAGN_FS_AVL_4700MG,
.value = ST_MAGN_1_FS_AVL_4700_VAL,
.gain = ST_MAGN_1_FS_AVL_4700_GAIN_XY,
.gain2 = ST_MAGN_1_FS_AVL_4700_GAIN_Z,
},
[5] = {
.num = ST_MAGN_FS_AVL_5600MG,
.value = ST_MAGN_1_FS_AVL_5600_VAL,
.gain = ST_MAGN_1_FS_AVL_5600_GAIN_XY,
.gain2 = ST_MAGN_1_FS_AVL_5600_GAIN_Z,
},
[6] = {
.num = ST_MAGN_FS_AVL_8100MG,
.value = ST_MAGN_1_FS_AVL_8100_VAL,
.gain = ST_MAGN_1_FS_AVL_8100_GAIN_XY,
.gain2 = ST_MAGN_1_FS_AVL_8100_GAIN_Z,
},
},
},
.multi_read_bit = ST_MAGN_1_MULTIREAD_BIT,
.bootime = 2,
},
{
.wai = ST_MAGN_2_WAI_EXP,
.sensors_supported = {
[0] = LIS3MDL_MAGN_DEV_NAME,
},
.ch = (struct iio_chan_spec *)st_magn_2_16bit_channels,
.odr = {
.addr = ST_MAGN_2_ODR_ADDR,
.mask = ST_MAGN_2_ODR_MASK,
.odr_avl = {
{ 1, ST_MAGN_2_ODR_AVL_1HZ_VAL, },
{ 2, ST_MAGN_2_ODR_AVL_2HZ_VAL, },
{ 3, ST_MAGN_2_ODR_AVL_3HZ_VAL, },
{ 5, ST_MAGN_2_ODR_AVL_5HZ_VAL, },
{ 10, ST_MAGN_2_ODR_AVL_10HZ_VAL, },
{ 20, ST_MAGN_2_ODR_AVL_20HZ_VAL, },
{ 40, ST_MAGN_2_ODR_AVL_40HZ_VAL, },
{ 80, ST_MAGN_2_ODR_AVL_80HZ_VAL, },
},
},
.pw = {
.addr = ST_MAGN_2_PW_ADDR,
.mask = ST_MAGN_2_PW_MASK,
.value_on = ST_MAGN_2_PW_ON,
.value_off = ST_MAGN_2_PW_OFF,
},
.fs = {
.addr = ST_MAGN_2_FS_ADDR,
.mask = ST_MAGN_2_FS_MASK,
.fs_avl = {
[0] = {
.num = ST_MAGN_FS_AVL_4000MG,
.value = ST_MAGN_2_FS_AVL_4000_VAL,
.gain = ST_MAGN_2_FS_AVL_4000_GAIN,
},
[1] = {
.num = ST_MAGN_FS_AVL_8000MG,
.value = ST_MAGN_2_FS_AVL_8000_VAL,
.gain = ST_MAGN_2_FS_AVL_8000_GAIN,
},
[2] = {
.num = ST_MAGN_FS_AVL_10000MG,
.value = ST_MAGN_2_FS_AVL_10000_VAL,
.gain = ST_MAGN_2_FS_AVL_10000_GAIN,
},
},
},
.multi_read_bit = ST_MAGN_2_MULTIREAD_BIT,
.bootime = 2,
},
};
static int st_magn_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *ch, int *val,
int *val2, long mask)
{
int err;
struct st_sensor_data *mdata = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_RAW:
err = st_sensors_read_info_raw(indio_dev, ch, val);
if (err < 0)
goto read_error;
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
*val = 0;
if ((ch->scan_index == ST_SENSORS_SCAN_Z) &&
(mdata->current_fullscale->gain2 != 0))
*val2 = mdata->current_fullscale->gain2;
else
*val2 = mdata->current_fullscale->gain;
return IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
}
read_error:
return err;
}
static int st_magn_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int val, int val2, long mask)
{
int err;
switch (mask) {
case IIO_CHAN_INFO_SCALE:
err = st_sensors_set_fullscale_by_gain(indio_dev, val2);
break;
default:
err = -EINVAL;
}
return err;
}
static ST_SENSOR_DEV_ATTR_SAMP_FREQ();
static ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL();
static ST_SENSORS_DEV_ATTR_SCALE_AVAIL(in_magn_scale_available);
static struct attribute *st_magn_attributes[] = {
&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
&iio_dev_attr_in_magn_scale_available.dev_attr.attr,
&iio_dev_attr_sampling_frequency.dev_attr.attr,
NULL,
};
static const struct attribute_group st_magn_attribute_group = {
.attrs = st_magn_attributes,
};
static const struct iio_info magn_info = {
.driver_module = THIS_MODULE,
.attrs = &st_magn_attribute_group,
.read_raw = &st_magn_read_raw,
.write_raw = &st_magn_write_raw,
};
int st_magn_common_probe(struct iio_dev *indio_dev,
struct st_sensors_platform_data *pdata)
{
struct st_sensor_data *mdata = iio_priv(indio_dev);
int irq = mdata->get_irq_data_ready(indio_dev);
int err;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &magn_info;
st_sensors_power_enable(indio_dev);
err = st_sensors_check_device_support(indio_dev,
ARRAY_SIZE(st_magn_sensors), st_magn_sensors);
if (err < 0)
return err;
mdata->num_data_channels = ST_MAGN_NUMBER_DATA_CHANNELS;
mdata->multiread_bit = mdata->sensor->multi_read_bit;
indio_dev->channels = mdata->sensor->ch;
indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
mdata->current_fullscale = (struct st_sensor_fullscale_avl *)
&mdata->sensor->fs.fs_avl[0];
mdata->odr = mdata->sensor->odr.odr_avl[0].hz;
err = st_sensors_init_sensor(indio_dev, pdata);
if (err < 0)
return err;
err = st_magn_allocate_ring(indio_dev);
if (err < 0)
return err;
if (irq > 0) {
err = st_sensors_allocate_trigger(indio_dev, NULL);
if (err < 0)
goto st_magn_probe_trigger_error;
}
err = iio_device_register(indio_dev);
if (err)
goto st_magn_device_register_error;
dev_info(&indio_dev->dev, "registered magnetometer %s\n",
indio_dev->name);
return 0;
st_magn_device_register_error:
if (irq > 0)
st_sensors_deallocate_trigger(indio_dev);
st_magn_probe_trigger_error:
st_magn_deallocate_ring(indio_dev);
return err;
}
EXPORT_SYMBOL(st_magn_common_probe);
void st_magn_common_remove(struct iio_dev *indio_dev)
{
struct st_sensor_data *mdata = iio_priv(indio_dev);
st_sensors_power_disable(indio_dev);
iio_device_unregister(indio_dev);
if (mdata->get_irq_data_ready(indio_dev) > 0)
st_sensors_deallocate_trigger(indio_dev);
st_magn_deallocate_ring(indio_dev);
}
EXPORT_SYMBOL(st_magn_common_remove);
MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
MODULE_DESCRIPTION("STMicroelectronics magnetometers driver");
MODULE_LICENSE("GPL v2");
View Git Blame Copy Permalink