mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-27 06:34:11 +08:00
165cccc843
This patch fixed the bellow no DRM_INFO is printed issue: if (!delay_count) DRM_INFO("phylock and phystopstateclklane is not ready.\n"); There will some printed issues with above info, under certain circumstances: If ((BIT(0) | BIT(2)) & val) is never true, break will not happen and delay_count will be max u32 value (?), and no DRM_INFO is printed. Also if ((BIT(0) | BIT(2)) & val) is true at the last possible loop round, break happens, but now delay_count is already zero ( because of earlier delay_count-- ) and DRM_INFO is erroneously printed. Thanks to Juha Leppänen, he reports to me this issue. Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org> Reported-by: Juha Leppänen <juha_efku@dnainternet.net>
859 lines
20 KiB
C
859 lines
20 KiB
C
/*
|
|
* DesignWare MIPI DSI Host Controller v1.02 driver
|
|
*
|
|
* Copyright (c) 2016 Linaro Limited.
|
|
* Copyright (c) 2014-2016 Hisilicon Limited.
|
|
*
|
|
* Author:
|
|
* Xinliang Liu <z.liuxinliang@hisilicon.com>
|
|
* Xinliang Liu <xinliang.liu@linaro.org>
|
|
* Xinwei Kong <kong.kongxinwei@hisilicon.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/component.h>
|
|
#include <linux/of_graph.h>
|
|
|
|
#include <drm/drm_of.h>
|
|
#include <drm/drm_crtc_helper.h>
|
|
#include <drm/drm_mipi_dsi.h>
|
|
#include <drm/drm_encoder_slave.h>
|
|
#include <drm/drm_atomic_helper.h>
|
|
|
|
#include "dw_dsi_reg.h"
|
|
|
|
#define MAX_TX_ESC_CLK 10
|
|
#define ROUND(x, y) ((x) / (y) + \
|
|
((x) % (y) * 10 / (y) >= 5 ? 1 : 0))
|
|
#define PHY_REF_CLK_RATE 19200000
|
|
#define PHY_REF_CLK_PERIOD_PS (1000000000 / (PHY_REF_CLK_RATE / 1000))
|
|
|
|
#define encoder_to_dsi(encoder) \
|
|
container_of(encoder, struct dw_dsi, encoder)
|
|
#define host_to_dsi(host) \
|
|
container_of(host, struct dw_dsi, host)
|
|
|
|
struct mipi_phy_params {
|
|
u32 clk_t_lpx;
|
|
u32 clk_t_hs_prepare;
|
|
u32 clk_t_hs_zero;
|
|
u32 clk_t_hs_trial;
|
|
u32 clk_t_wakeup;
|
|
u32 data_t_lpx;
|
|
u32 data_t_hs_prepare;
|
|
u32 data_t_hs_zero;
|
|
u32 data_t_hs_trial;
|
|
u32 data_t_ta_go;
|
|
u32 data_t_ta_get;
|
|
u32 data_t_wakeup;
|
|
u32 hstx_ckg_sel;
|
|
u32 pll_fbd_div5f;
|
|
u32 pll_fbd_div1f;
|
|
u32 pll_fbd_2p;
|
|
u32 pll_enbwt;
|
|
u32 pll_fbd_p;
|
|
u32 pll_fbd_s;
|
|
u32 pll_pre_div1p;
|
|
u32 pll_pre_p;
|
|
u32 pll_vco_750M;
|
|
u32 pll_lpf_rs;
|
|
u32 pll_lpf_cs;
|
|
u32 clklp2hs_time;
|
|
u32 clkhs2lp_time;
|
|
u32 lp2hs_time;
|
|
u32 hs2lp_time;
|
|
u32 clk_to_data_delay;
|
|
u32 data_to_clk_delay;
|
|
u32 lane_byte_clk_kHz;
|
|
u32 clk_division;
|
|
};
|
|
|
|
struct dsi_hw_ctx {
|
|
void __iomem *base;
|
|
struct clk *pclk;
|
|
};
|
|
|
|
struct dw_dsi {
|
|
struct drm_encoder encoder;
|
|
struct drm_bridge *bridge;
|
|
struct mipi_dsi_host host;
|
|
struct drm_display_mode cur_mode;
|
|
struct dsi_hw_ctx *ctx;
|
|
struct mipi_phy_params phy;
|
|
|
|
u32 lanes;
|
|
enum mipi_dsi_pixel_format format;
|
|
unsigned long mode_flags;
|
|
bool enable;
|
|
};
|
|
|
|
struct dsi_data {
|
|
struct dw_dsi dsi;
|
|
struct dsi_hw_ctx ctx;
|
|
};
|
|
|
|
struct dsi_phy_range {
|
|
u32 min_range_kHz;
|
|
u32 max_range_kHz;
|
|
u32 pll_vco_750M;
|
|
u32 hstx_ckg_sel;
|
|
};
|
|
|
|
static const struct dsi_phy_range dphy_range_info[] = {
|
|
{ 46875, 62500, 1, 7 },
|
|
{ 62500, 93750, 0, 7 },
|
|
{ 93750, 125000, 1, 6 },
|
|
{ 125000, 187500, 0, 6 },
|
|
{ 187500, 250000, 1, 5 },
|
|
{ 250000, 375000, 0, 5 },
|
|
{ 375000, 500000, 1, 4 },
|
|
{ 500000, 750000, 0, 4 },
|
|
{ 750000, 1000000, 1, 0 },
|
|
{ 1000000, 1500000, 0, 0 }
|
|
};
|
|
|
|
static u32 dsi_calc_phy_rate(u32 req_kHz, struct mipi_phy_params *phy)
|
|
{
|
|
u32 ref_clk_ps = PHY_REF_CLK_PERIOD_PS;
|
|
u32 tmp_kHz = req_kHz;
|
|
u32 i = 0;
|
|
u32 q_pll = 1;
|
|
u32 m_pll = 0;
|
|
u32 n_pll = 0;
|
|
u32 r_pll = 1;
|
|
u32 m_n = 0;
|
|
u32 m_n_int = 0;
|
|
u32 f_kHz = 0;
|
|
u64 temp;
|
|
|
|
/*
|
|
* Find a rate >= req_kHz.
|
|
*/
|
|
do {
|
|
f_kHz = tmp_kHz;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(dphy_range_info); i++)
|
|
if (f_kHz >= dphy_range_info[i].min_range_kHz &&
|
|
f_kHz <= dphy_range_info[i].max_range_kHz)
|
|
break;
|
|
|
|
if (i == ARRAY_SIZE(dphy_range_info)) {
|
|
DRM_ERROR("%dkHz out of range\n", f_kHz);
|
|
return 0;
|
|
}
|
|
|
|
phy->pll_vco_750M = dphy_range_info[i].pll_vco_750M;
|
|
phy->hstx_ckg_sel = dphy_range_info[i].hstx_ckg_sel;
|
|
|
|
if (phy->hstx_ckg_sel <= 7 &&
|
|
phy->hstx_ckg_sel >= 4)
|
|
q_pll = 0x10 >> (7 - phy->hstx_ckg_sel);
|
|
|
|
temp = f_kHz * (u64)q_pll * (u64)ref_clk_ps;
|
|
m_n_int = temp / (u64)1000000000;
|
|
m_n = (temp % (u64)1000000000) / (u64)100000000;
|
|
|
|
if (m_n_int % 2 == 0) {
|
|
if (m_n * 6 >= 50) {
|
|
n_pll = 2;
|
|
m_pll = (m_n_int + 1) * n_pll;
|
|
} else if (m_n * 6 >= 30) {
|
|
n_pll = 3;
|
|
m_pll = m_n_int * n_pll + 2;
|
|
} else {
|
|
n_pll = 1;
|
|
m_pll = m_n_int * n_pll;
|
|
}
|
|
} else {
|
|
if (m_n * 6 >= 50) {
|
|
n_pll = 1;
|
|
m_pll = (m_n_int + 1) * n_pll;
|
|
} else if (m_n * 6 >= 30) {
|
|
n_pll = 1;
|
|
m_pll = (m_n_int + 1) * n_pll;
|
|
} else if (m_n * 6 >= 10) {
|
|
n_pll = 3;
|
|
m_pll = m_n_int * n_pll + 1;
|
|
} else {
|
|
n_pll = 2;
|
|
m_pll = m_n_int * n_pll;
|
|
}
|
|
}
|
|
|
|
if (n_pll == 1) {
|
|
phy->pll_fbd_p = 0;
|
|
phy->pll_pre_div1p = 1;
|
|
} else {
|
|
phy->pll_fbd_p = n_pll;
|
|
phy->pll_pre_div1p = 0;
|
|
}
|
|
|
|
if (phy->pll_fbd_2p <= 7 && phy->pll_fbd_2p >= 4)
|
|
r_pll = 0x10 >> (7 - phy->pll_fbd_2p);
|
|
|
|
if (m_pll == 2) {
|
|
phy->pll_pre_p = 0;
|
|
phy->pll_fbd_s = 0;
|
|
phy->pll_fbd_div1f = 0;
|
|
phy->pll_fbd_div5f = 1;
|
|
} else if (m_pll >= 2 * 2 * r_pll && m_pll <= 2 * 4 * r_pll) {
|
|
phy->pll_pre_p = m_pll / (2 * r_pll);
|
|
phy->pll_fbd_s = 0;
|
|
phy->pll_fbd_div1f = 1;
|
|
phy->pll_fbd_div5f = 0;
|
|
} else if (m_pll >= 2 * 5 * r_pll && m_pll <= 2 * 150 * r_pll) {
|
|
if (((m_pll / (2 * r_pll)) % 2) == 0) {
|
|
phy->pll_pre_p =
|
|
(m_pll / (2 * r_pll)) / 2 - 1;
|
|
phy->pll_fbd_s =
|
|
(m_pll / (2 * r_pll)) % 2 + 2;
|
|
} else {
|
|
phy->pll_pre_p =
|
|
(m_pll / (2 * r_pll)) / 2;
|
|
phy->pll_fbd_s =
|
|
(m_pll / (2 * r_pll)) % 2;
|
|
}
|
|
phy->pll_fbd_div1f = 0;
|
|
phy->pll_fbd_div5f = 0;
|
|
} else {
|
|
phy->pll_pre_p = 0;
|
|
phy->pll_fbd_s = 0;
|
|
phy->pll_fbd_div1f = 0;
|
|
phy->pll_fbd_div5f = 1;
|
|
}
|
|
|
|
f_kHz = (u64)1000000000 * (u64)m_pll /
|
|
((u64)ref_clk_ps * (u64)n_pll * (u64)q_pll);
|
|
|
|
if (f_kHz >= req_kHz)
|
|
break;
|
|
|
|
tmp_kHz += 10;
|
|
|
|
} while (true);
|
|
|
|
return f_kHz;
|
|
}
|
|
|
|
static void dsi_get_phy_params(u32 phy_req_kHz,
|
|
struct mipi_phy_params *phy)
|
|
{
|
|
u32 ref_clk_ps = PHY_REF_CLK_PERIOD_PS;
|
|
u32 phy_rate_kHz;
|
|
u32 ui;
|
|
|
|
memset(phy, 0, sizeof(*phy));
|
|
|
|
phy_rate_kHz = dsi_calc_phy_rate(phy_req_kHz, phy);
|
|
if (!phy_rate_kHz)
|
|
return;
|
|
|
|
ui = 1000000 / phy_rate_kHz;
|
|
|
|
phy->clk_t_lpx = ROUND(50, 8 * ui);
|
|
phy->clk_t_hs_prepare = ROUND(133, 16 * ui) - 1;
|
|
|
|
phy->clk_t_hs_zero = ROUND(262, 8 * ui);
|
|
phy->clk_t_hs_trial = 2 * (ROUND(60, 8 * ui) - 1);
|
|
phy->clk_t_wakeup = ROUND(1000000, (ref_clk_ps / 1000) - 1);
|
|
if (phy->clk_t_wakeup > 0xff)
|
|
phy->clk_t_wakeup = 0xff;
|
|
phy->data_t_wakeup = phy->clk_t_wakeup;
|
|
phy->data_t_lpx = phy->clk_t_lpx;
|
|
phy->data_t_hs_prepare = ROUND(125 + 10 * ui, 16 * ui) - 1;
|
|
phy->data_t_hs_zero = ROUND(105 + 6 * ui, 8 * ui);
|
|
phy->data_t_hs_trial = 2 * (ROUND(60 + 4 * ui, 8 * ui) - 1);
|
|
phy->data_t_ta_go = 3;
|
|
phy->data_t_ta_get = 4;
|
|
|
|
phy->pll_enbwt = 1;
|
|
phy->clklp2hs_time = ROUND(407, 8 * ui) + 12;
|
|
phy->clkhs2lp_time = ROUND(105 + 12 * ui, 8 * ui);
|
|
phy->lp2hs_time = ROUND(240 + 12 * ui, 8 * ui) + 1;
|
|
phy->hs2lp_time = phy->clkhs2lp_time;
|
|
phy->clk_to_data_delay = 1 + phy->clklp2hs_time;
|
|
phy->data_to_clk_delay = ROUND(60 + 52 * ui, 8 * ui) +
|
|
phy->clkhs2lp_time;
|
|
|
|
phy->lane_byte_clk_kHz = phy_rate_kHz / 8;
|
|
phy->clk_division =
|
|
DIV_ROUND_UP(phy->lane_byte_clk_kHz, MAX_TX_ESC_CLK);
|
|
}
|
|
|
|
static u32 dsi_get_dpi_color_coding(enum mipi_dsi_pixel_format format)
|
|
{
|
|
u32 val;
|
|
|
|
/*
|
|
* TODO: only support RGB888 now, to support more
|
|
*/
|
|
switch (format) {
|
|
case MIPI_DSI_FMT_RGB888:
|
|
val = DSI_24BITS_1;
|
|
break;
|
|
default:
|
|
val = DSI_24BITS_1;
|
|
break;
|
|
}
|
|
|
|
return val;
|
|
}
|
|
|
|
/*
|
|
* dsi phy reg write function
|
|
*/
|
|
static void dsi_phy_tst_set(void __iomem *base, u32 reg, u32 val)
|
|
{
|
|
u32 reg_write = 0x10000 + reg;
|
|
|
|
/*
|
|
* latch reg first
|
|
*/
|
|
writel(reg_write, base + PHY_TST_CTRL1);
|
|
writel(0x02, base + PHY_TST_CTRL0);
|
|
writel(0x00, base + PHY_TST_CTRL0);
|
|
|
|
/*
|
|
* then latch value
|
|
*/
|
|
writel(val, base + PHY_TST_CTRL1);
|
|
writel(0x02, base + PHY_TST_CTRL0);
|
|
writel(0x00, base + PHY_TST_CTRL0);
|
|
}
|
|
|
|
static void dsi_set_phy_timer(void __iomem *base,
|
|
struct mipi_phy_params *phy,
|
|
u32 lanes)
|
|
{
|
|
u32 val;
|
|
|
|
/*
|
|
* Set lane value and phy stop wait time.
|
|
*/
|
|
val = (lanes - 1) | (PHY_STOP_WAIT_TIME << 8);
|
|
writel(val, base + PHY_IF_CFG);
|
|
|
|
/*
|
|
* Set phy clk division.
|
|
*/
|
|
val = readl(base + CLKMGR_CFG) | phy->clk_division;
|
|
writel(val, base + CLKMGR_CFG);
|
|
|
|
/*
|
|
* Set lp and hs switching params.
|
|
*/
|
|
dw_update_bits(base + PHY_TMR_CFG, 24, MASK(8), phy->hs2lp_time);
|
|
dw_update_bits(base + PHY_TMR_CFG, 16, MASK(8), phy->lp2hs_time);
|
|
dw_update_bits(base + PHY_TMR_LPCLK_CFG, 16, MASK(10),
|
|
phy->clkhs2lp_time);
|
|
dw_update_bits(base + PHY_TMR_LPCLK_CFG, 0, MASK(10),
|
|
phy->clklp2hs_time);
|
|
dw_update_bits(base + CLK_DATA_TMR_CFG, 8, MASK(8),
|
|
phy->data_to_clk_delay);
|
|
dw_update_bits(base + CLK_DATA_TMR_CFG, 0, MASK(8),
|
|
phy->clk_to_data_delay);
|
|
}
|
|
|
|
static void dsi_set_mipi_phy(void __iomem *base,
|
|
struct mipi_phy_params *phy,
|
|
u32 lanes)
|
|
{
|
|
u32 delay_count;
|
|
u32 val;
|
|
u32 i;
|
|
|
|
/* phy timer setting */
|
|
dsi_set_phy_timer(base, phy, lanes);
|
|
|
|
/*
|
|
* Reset to clean up phy tst params.
|
|
*/
|
|
writel(0, base + PHY_RSTZ);
|
|
writel(0, base + PHY_TST_CTRL0);
|
|
writel(1, base + PHY_TST_CTRL0);
|
|
writel(0, base + PHY_TST_CTRL0);
|
|
|
|
/*
|
|
* Clock lane timing control setting: TLPX, THS-PREPARE,
|
|
* THS-ZERO, THS-TRAIL, TWAKEUP.
|
|
*/
|
|
dsi_phy_tst_set(base, CLK_TLPX, phy->clk_t_lpx);
|
|
dsi_phy_tst_set(base, CLK_THS_PREPARE, phy->clk_t_hs_prepare);
|
|
dsi_phy_tst_set(base, CLK_THS_ZERO, phy->clk_t_hs_zero);
|
|
dsi_phy_tst_set(base, CLK_THS_TRAIL, phy->clk_t_hs_trial);
|
|
dsi_phy_tst_set(base, CLK_TWAKEUP, phy->clk_t_wakeup);
|
|
|
|
/*
|
|
* Data lane timing control setting: TLPX, THS-PREPARE,
|
|
* THS-ZERO, THS-TRAIL, TTA-GO, TTA-GET, TWAKEUP.
|
|
*/
|
|
for (i = 0; i < lanes; i++) {
|
|
dsi_phy_tst_set(base, DATA_TLPX(i), phy->data_t_lpx);
|
|
dsi_phy_tst_set(base, DATA_THS_PREPARE(i),
|
|
phy->data_t_hs_prepare);
|
|
dsi_phy_tst_set(base, DATA_THS_ZERO(i), phy->data_t_hs_zero);
|
|
dsi_phy_tst_set(base, DATA_THS_TRAIL(i), phy->data_t_hs_trial);
|
|
dsi_phy_tst_set(base, DATA_TTA_GO(i), phy->data_t_ta_go);
|
|
dsi_phy_tst_set(base, DATA_TTA_GET(i), phy->data_t_ta_get);
|
|
dsi_phy_tst_set(base, DATA_TWAKEUP(i), phy->data_t_wakeup);
|
|
}
|
|
|
|
/*
|
|
* physical configuration: I, pll I, pll II, pll III,
|
|
* pll IV, pll V.
|
|
*/
|
|
dsi_phy_tst_set(base, PHY_CFG_I, phy->hstx_ckg_sel);
|
|
val = (phy->pll_fbd_div5f << 5) + (phy->pll_fbd_div1f << 4) +
|
|
(phy->pll_fbd_2p << 1) + phy->pll_enbwt;
|
|
dsi_phy_tst_set(base, PHY_CFG_PLL_I, val);
|
|
dsi_phy_tst_set(base, PHY_CFG_PLL_II, phy->pll_fbd_p);
|
|
dsi_phy_tst_set(base, PHY_CFG_PLL_III, phy->pll_fbd_s);
|
|
val = (phy->pll_pre_div1p << 7) + phy->pll_pre_p;
|
|
dsi_phy_tst_set(base, PHY_CFG_PLL_IV, val);
|
|
val = (5 << 5) + (phy->pll_vco_750M << 4) + (phy->pll_lpf_rs << 2) +
|
|
phy->pll_lpf_cs;
|
|
dsi_phy_tst_set(base, PHY_CFG_PLL_V, val);
|
|
|
|
writel(PHY_ENABLECLK, base + PHY_RSTZ);
|
|
udelay(1);
|
|
writel(PHY_ENABLECLK | PHY_UNSHUTDOWNZ, base + PHY_RSTZ);
|
|
udelay(1);
|
|
writel(PHY_ENABLECLK | PHY_UNRSTZ | PHY_UNSHUTDOWNZ, base + PHY_RSTZ);
|
|
usleep_range(1000, 1500);
|
|
|
|
/*
|
|
* wait for phy's clock ready
|
|
*/
|
|
delay_count = 100;
|
|
while (delay_count) {
|
|
val = readl(base + PHY_STATUS);
|
|
if ((BIT(0) | BIT(2)) & val)
|
|
break;
|
|
|
|
udelay(1);
|
|
delay_count--;
|
|
}
|
|
|
|
if (!delay_count)
|
|
DRM_INFO("phylock and phystopstateclklane is not ready.\n");
|
|
}
|
|
|
|
static void dsi_set_mode_timing(void __iomem *base,
|
|
u32 lane_byte_clk_kHz,
|
|
struct drm_display_mode *mode,
|
|
enum mipi_dsi_pixel_format format)
|
|
{
|
|
u32 hfp, hbp, hsw, vfp, vbp, vsw;
|
|
u32 hline_time;
|
|
u32 hsa_time;
|
|
u32 hbp_time;
|
|
u32 pixel_clk_kHz;
|
|
int htot, vtot;
|
|
u32 val;
|
|
u64 tmp;
|
|
|
|
val = dsi_get_dpi_color_coding(format);
|
|
writel(val, base + DPI_COLOR_CODING);
|
|
|
|
val = (mode->flags & DRM_MODE_FLAG_NHSYNC ? 1 : 0) << 2;
|
|
val |= (mode->flags & DRM_MODE_FLAG_NVSYNC ? 1 : 0) << 1;
|
|
writel(val, base + DPI_CFG_POL);
|
|
|
|
/*
|
|
* The DSI IP accepts vertical timing using lines as normal,
|
|
* but horizontal timing is a mixture of pixel-clocks for the
|
|
* active region and byte-lane clocks for the blanking-related
|
|
* timings. hfp is specified as the total hline_time in byte-
|
|
* lane clocks minus hsa, hbp and active.
|
|
*/
|
|
pixel_clk_kHz = mode->clock;
|
|
htot = mode->htotal;
|
|
vtot = mode->vtotal;
|
|
hfp = mode->hsync_start - mode->hdisplay;
|
|
hbp = mode->htotal - mode->hsync_end;
|
|
hsw = mode->hsync_end - mode->hsync_start;
|
|
vfp = mode->vsync_start - mode->vdisplay;
|
|
vbp = mode->vtotal - mode->vsync_end;
|
|
vsw = mode->vsync_end - mode->vsync_start;
|
|
if (vsw > 15) {
|
|
DRM_DEBUG_DRIVER("vsw exceeded 15\n");
|
|
vsw = 15;
|
|
}
|
|
|
|
hsa_time = (hsw * lane_byte_clk_kHz) / pixel_clk_kHz;
|
|
hbp_time = (hbp * lane_byte_clk_kHz) / pixel_clk_kHz;
|
|
tmp = (u64)htot * (u64)lane_byte_clk_kHz;
|
|
hline_time = DIV_ROUND_UP(tmp, pixel_clk_kHz);
|
|
|
|
/* all specified in byte-lane clocks */
|
|
writel(hsa_time, base + VID_HSA_TIME);
|
|
writel(hbp_time, base + VID_HBP_TIME);
|
|
writel(hline_time, base + VID_HLINE_TIME);
|
|
|
|
writel(vsw, base + VID_VSA_LINES);
|
|
writel(vbp, base + VID_VBP_LINES);
|
|
writel(vfp, base + VID_VFP_LINES);
|
|
writel(mode->vdisplay, base + VID_VACTIVE_LINES);
|
|
writel(mode->hdisplay, base + VID_PKT_SIZE);
|
|
|
|
DRM_DEBUG_DRIVER("htot=%d, hfp=%d, hbp=%d, hsw=%d\n",
|
|
htot, hfp, hbp, hsw);
|
|
DRM_DEBUG_DRIVER("vtol=%d, vfp=%d, vbp=%d, vsw=%d\n",
|
|
vtot, vfp, vbp, vsw);
|
|
DRM_DEBUG_DRIVER("hsa_time=%d, hbp_time=%d, hline_time=%d\n",
|
|
hsa_time, hbp_time, hline_time);
|
|
}
|
|
|
|
static void dsi_set_video_mode(void __iomem *base, unsigned long flags)
|
|
{
|
|
u32 val;
|
|
u32 mode_mask = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
|
|
MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
|
|
u32 non_burst_sync_pulse = MIPI_DSI_MODE_VIDEO |
|
|
MIPI_DSI_MODE_VIDEO_SYNC_PULSE;
|
|
u32 non_burst_sync_event = MIPI_DSI_MODE_VIDEO;
|
|
|
|
/*
|
|
* choose video mode type
|
|
*/
|
|
if ((flags & mode_mask) == non_burst_sync_pulse)
|
|
val = DSI_NON_BURST_SYNC_PULSES;
|
|
else if ((flags & mode_mask) == non_burst_sync_event)
|
|
val = DSI_NON_BURST_SYNC_EVENTS;
|
|
else
|
|
val = DSI_BURST_SYNC_PULSES_1;
|
|
writel(val, base + VID_MODE_CFG);
|
|
|
|
writel(PHY_TXREQUESTCLKHS, base + LPCLK_CTRL);
|
|
writel(DSI_VIDEO_MODE, base + MODE_CFG);
|
|
}
|
|
|
|
static void dsi_mipi_init(struct dw_dsi *dsi)
|
|
{
|
|
struct dsi_hw_ctx *ctx = dsi->ctx;
|
|
struct mipi_phy_params *phy = &dsi->phy;
|
|
struct drm_display_mode *mode = &dsi->cur_mode;
|
|
u32 bpp = mipi_dsi_pixel_format_to_bpp(dsi->format);
|
|
void __iomem *base = ctx->base;
|
|
u32 dphy_req_kHz;
|
|
|
|
/*
|
|
* count phy params
|
|
*/
|
|
dphy_req_kHz = mode->clock * bpp / dsi->lanes;
|
|
dsi_get_phy_params(dphy_req_kHz, phy);
|
|
|
|
/* reset Core */
|
|
writel(RESET, base + PWR_UP);
|
|
|
|
/* set dsi phy params */
|
|
dsi_set_mipi_phy(base, phy, dsi->lanes);
|
|
|
|
/* set dsi mode timing */
|
|
dsi_set_mode_timing(base, phy->lane_byte_clk_kHz, mode, dsi->format);
|
|
|
|
/* set dsi video mode */
|
|
dsi_set_video_mode(base, dsi->mode_flags);
|
|
|
|
/* dsi wake up */
|
|
writel(POWERUP, base + PWR_UP);
|
|
|
|
DRM_DEBUG_DRIVER("lanes=%d, pixel_clk=%d kHz, bytes_freq=%d kHz\n",
|
|
dsi->lanes, mode->clock, phy->lane_byte_clk_kHz);
|
|
}
|
|
|
|
static void dsi_encoder_disable(struct drm_encoder *encoder)
|
|
{
|
|
struct dw_dsi *dsi = encoder_to_dsi(encoder);
|
|
struct dsi_hw_ctx *ctx = dsi->ctx;
|
|
void __iomem *base = ctx->base;
|
|
|
|
if (!dsi->enable)
|
|
return;
|
|
|
|
writel(0, base + PWR_UP);
|
|
writel(0, base + LPCLK_CTRL);
|
|
writel(0, base + PHY_RSTZ);
|
|
clk_disable_unprepare(ctx->pclk);
|
|
|
|
dsi->enable = false;
|
|
}
|
|
|
|
static void dsi_encoder_enable(struct drm_encoder *encoder)
|
|
{
|
|
struct dw_dsi *dsi = encoder_to_dsi(encoder);
|
|
struct dsi_hw_ctx *ctx = dsi->ctx;
|
|
int ret;
|
|
|
|
if (dsi->enable)
|
|
return;
|
|
|
|
ret = clk_prepare_enable(ctx->pclk);
|
|
if (ret) {
|
|
DRM_ERROR("fail to enable pclk: %d\n", ret);
|
|
return;
|
|
}
|
|
|
|
dsi_mipi_init(dsi);
|
|
|
|
dsi->enable = true;
|
|
}
|
|
|
|
static void dsi_encoder_mode_set(struct drm_encoder *encoder,
|
|
struct drm_display_mode *mode,
|
|
struct drm_display_mode *adj_mode)
|
|
{
|
|
struct dw_dsi *dsi = encoder_to_dsi(encoder);
|
|
|
|
drm_mode_copy(&dsi->cur_mode, adj_mode);
|
|
}
|
|
|
|
static int dsi_encoder_atomic_check(struct drm_encoder *encoder,
|
|
struct drm_crtc_state *crtc_state,
|
|
struct drm_connector_state *conn_state)
|
|
{
|
|
/* do nothing */
|
|
return 0;
|
|
}
|
|
|
|
static const struct drm_encoder_helper_funcs dw_encoder_helper_funcs = {
|
|
.atomic_check = dsi_encoder_atomic_check,
|
|
.mode_set = dsi_encoder_mode_set,
|
|
.enable = dsi_encoder_enable,
|
|
.disable = dsi_encoder_disable
|
|
};
|
|
|
|
static const struct drm_encoder_funcs dw_encoder_funcs = {
|
|
.destroy = drm_encoder_cleanup,
|
|
};
|
|
|
|
static int dw_drm_encoder_init(struct device *dev,
|
|
struct drm_device *drm_dev,
|
|
struct drm_encoder *encoder)
|
|
{
|
|
int ret;
|
|
u32 crtc_mask = drm_of_find_possible_crtcs(drm_dev, dev->of_node);
|
|
|
|
if (!crtc_mask) {
|
|
DRM_ERROR("failed to find crtc mask\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
encoder->possible_crtcs = crtc_mask;
|
|
ret = drm_encoder_init(drm_dev, encoder, &dw_encoder_funcs,
|
|
DRM_MODE_ENCODER_DSI, NULL);
|
|
if (ret) {
|
|
DRM_ERROR("failed to init dsi encoder\n");
|
|
return ret;
|
|
}
|
|
|
|
drm_encoder_helper_add(encoder, &dw_encoder_helper_funcs);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dsi_host_attach(struct mipi_dsi_host *host,
|
|
struct mipi_dsi_device *mdsi)
|
|
{
|
|
struct dw_dsi *dsi = host_to_dsi(host);
|
|
|
|
if (mdsi->lanes < 1 || mdsi->lanes > 4) {
|
|
DRM_ERROR("dsi device params invalid\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
dsi->lanes = mdsi->lanes;
|
|
dsi->format = mdsi->format;
|
|
dsi->mode_flags = mdsi->mode_flags;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dsi_host_detach(struct mipi_dsi_host *host,
|
|
struct mipi_dsi_device *mdsi)
|
|
{
|
|
/* do nothing */
|
|
return 0;
|
|
}
|
|
|
|
static const struct mipi_dsi_host_ops dsi_host_ops = {
|
|
.attach = dsi_host_attach,
|
|
.detach = dsi_host_detach,
|
|
};
|
|
|
|
static int dsi_host_init(struct device *dev, struct dw_dsi *dsi)
|
|
{
|
|
struct mipi_dsi_host *host = &dsi->host;
|
|
int ret;
|
|
|
|
host->dev = dev;
|
|
host->ops = &dsi_host_ops;
|
|
ret = mipi_dsi_host_register(host);
|
|
if (ret) {
|
|
DRM_ERROR("failed to register dsi host\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dsi_bridge_init(struct drm_device *dev, struct dw_dsi *dsi)
|
|
{
|
|
struct drm_encoder *encoder = &dsi->encoder;
|
|
struct drm_bridge *bridge = dsi->bridge;
|
|
int ret;
|
|
|
|
/* associate the bridge to dsi encoder */
|
|
encoder->bridge = bridge;
|
|
bridge->encoder = encoder;
|
|
|
|
ret = drm_bridge_attach(dev, bridge);
|
|
if (ret) {
|
|
DRM_ERROR("failed to attach external bridge\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dsi_bind(struct device *dev, struct device *master, void *data)
|
|
{
|
|
struct dsi_data *ddata = dev_get_drvdata(dev);
|
|
struct dw_dsi *dsi = &ddata->dsi;
|
|
struct drm_device *drm_dev = data;
|
|
int ret;
|
|
|
|
ret = dw_drm_encoder_init(dev, drm_dev, &dsi->encoder);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = dsi_host_init(dev, dsi);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = dsi_bridge_init(drm_dev, dsi);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dsi_unbind(struct device *dev, struct device *master, void *data)
|
|
{
|
|
/* do nothing */
|
|
}
|
|
|
|
static const struct component_ops dsi_ops = {
|
|
.bind = dsi_bind,
|
|
.unbind = dsi_unbind,
|
|
};
|
|
|
|
static int dsi_parse_dt(struct platform_device *pdev, struct dw_dsi *dsi)
|
|
{
|
|
struct dsi_hw_ctx *ctx = dsi->ctx;
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct device_node *endpoint, *bridge_node;
|
|
struct drm_bridge *bridge;
|
|
struct resource *res;
|
|
|
|
/*
|
|
* Get the endpoint node. In our case, dsi has one output port1
|
|
* to which the external HDMI bridge is connected.
|
|
*/
|
|
endpoint = of_graph_get_endpoint_by_regs(np, 1, -1);
|
|
if (!endpoint) {
|
|
DRM_ERROR("no valid endpoint node\n");
|
|
return -ENODEV;
|
|
}
|
|
of_node_put(endpoint);
|
|
|
|
bridge_node = of_graph_get_remote_port_parent(endpoint);
|
|
if (!bridge_node) {
|
|
DRM_ERROR("no valid bridge node\n");
|
|
return -ENODEV;
|
|
}
|
|
of_node_put(bridge_node);
|
|
|
|
bridge = of_drm_find_bridge(bridge_node);
|
|
if (!bridge) {
|
|
DRM_INFO("wait for external HDMI bridge driver.\n");
|
|
return -EPROBE_DEFER;
|
|
}
|
|
dsi->bridge = bridge;
|
|
|
|
ctx->pclk = devm_clk_get(&pdev->dev, "pclk");
|
|
if (IS_ERR(ctx->pclk)) {
|
|
DRM_ERROR("failed to get pclk clock\n");
|
|
return PTR_ERR(ctx->pclk);
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
ctx->base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(ctx->base)) {
|
|
DRM_ERROR("failed to remap dsi io region\n");
|
|
return PTR_ERR(ctx->base);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dsi_probe(struct platform_device *pdev)
|
|
{
|
|
struct dsi_data *data;
|
|
struct dw_dsi *dsi;
|
|
struct dsi_hw_ctx *ctx;
|
|
int ret;
|
|
|
|
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
|
|
if (!data) {
|
|
DRM_ERROR("failed to allocate dsi data.\n");
|
|
return -ENOMEM;
|
|
}
|
|
dsi = &data->dsi;
|
|
ctx = &data->ctx;
|
|
dsi->ctx = ctx;
|
|
|
|
ret = dsi_parse_dt(pdev, dsi);
|
|
if (ret)
|
|
return ret;
|
|
|
|
platform_set_drvdata(pdev, data);
|
|
|
|
return component_add(&pdev->dev, &dsi_ops);
|
|
}
|
|
|
|
static int dsi_remove(struct platform_device *pdev)
|
|
{
|
|
component_del(&pdev->dev, &dsi_ops);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id dsi_of_match[] = {
|
|
{.compatible = "hisilicon,hi6220-dsi"},
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, dsi_of_match);
|
|
|
|
static struct platform_driver dsi_driver = {
|
|
.probe = dsi_probe,
|
|
.remove = dsi_remove,
|
|
.driver = {
|
|
.name = "dw-dsi",
|
|
.of_match_table = dsi_of_match,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(dsi_driver);
|
|
|
|
MODULE_AUTHOR("Xinliang Liu <xinliang.liu@linaro.org>");
|
|
MODULE_AUTHOR("Xinliang Liu <z.liuxinliang@hisilicon.com>");
|
|
MODULE_AUTHOR("Xinwei Kong <kong.kongxinwei@hisilicon.com>");
|
|
MODULE_DESCRIPTION("DesignWare MIPI DSI Host Controller v1.02 driver");
|
|
MODULE_LICENSE("GPL v2");
|