linux-next/include/linux/kernel.h

#ifndef _LINUX_KERNEL_H
#define _LINUX_KERNEL_H

/*
 * 'kernel.h' contains some often-used function prototypes etc
 */

#ifdef __KERNEL__

#include <stdarg.h>
#include <linux/linkage.h>
#include <linux/stddef.h>
#include <linux/types.h>
#include <linux/compiler.h>
#include <linux/bitops.h>
#include <linux/log2.h>
#include <linux/typecheck.h>
#include <linux/dynamic_debug.h>
#include <asm/byteorder.h>
#include <asm/bug.h>

extern const char linux_banner[];
extern const char linux_proc_banner[];

#define USHORT_MAX	((u16)(~0U))
#define SHORT_MAX	((s16)(USHORT_MAX>>1))
#define SHORT_MIN	(-SHORT_MAX - 1)
#define INT_MAX		((int)(~0U>>1))
#define INT_MIN		(-INT_MAX - 1)
#define UINT_MAX	(~0U)
#define LONG_MAX	((long)(~0UL>>1))
#define LONG_MIN	(-LONG_MAX - 1)
#define ULONG_MAX	(~0UL)
#define LLONG_MAX	((long long)(~0ULL>>1))
#define LLONG_MIN	(-LLONG_MAX - 1)
#define ULLONG_MAX	(~0ULL)

#define STACK_MAGIC	0xdeadbeef

#define ALIGN(x,a)		__ALIGN_MASK(x,(typeof(x))(a)-1)
#define __ALIGN_MASK(x,mask)	(((x)+(mask))&~(mask))
#define PTR_ALIGN(p, a)		((typeof(p))ALIGN((unsigned long)(p), (a)))
#define IS_ALIGNED(x, a)		(((x) & ((typeof(x))(a) - 1)) == 0)

#define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]) + __must_be_array(arr))

#define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f))
#define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d))
#define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y))
#define DIV_ROUND_CLOSEST(x, divisor)(			\
{							\
	typeof(divisor) __divisor = divisor;		\
	(((x) + ((__divisor) / 2)) / (__divisor));	\
}							\
)

#define _RET_IP_		(unsigned long)__builtin_return_address(0)
#define _THIS_IP_  ({ __label__ __here; __here: (unsigned long)&&__here; })

#ifdef CONFIG_LBDAF
# include <asm/div64.h>
# define sector_div(a, b) do_div(a, b)
#else
# define sector_div(n, b)( \
{ \
	int _res; \
	_res = (n) % (b); \
	(n) /= (b); \
	_res; \
} \
)
#endif

/**
 * upper_32_bits - return bits 32-63 of a number
 * @n: the number we're accessing
 *
 * A basic shift-right of a 64- or 32-bit quantity.  Use this to suppress
 * the "right shift count >= width of type" warning when that quantity is
 * 32-bits.
 */
#define upper_32_bits(n) ((u32)(((n) >> 16) >> 16))

/**
 * lower_32_bits - return bits 0-31 of a number
 * @n: the number we're accessing
 */
#define lower_32_bits(n) ((u32)(n))

#define	KERN_EMERG	"<0>"	/* system is unusable			*/
#define	KERN_ALERT	"<1>"	/* action must be taken immediately	*/
#define	KERN_CRIT	"<2>"	/* critical conditions			*/
#define	KERN_ERR	"<3>"	/* error conditions			*/
#define	KERN_WARNING	"<4>"	/* warning conditions			*/
#define	KERN_NOTICE	"<5>"	/* normal but significant condition	*/
#define	KERN_INFO	"<6>"	/* informational			*/
#define	KERN_DEBUG	"<7>"	/* debug-level messages			*/

/* Use the default kernel loglevel */
#define KERN_DEFAULT	"<d>"
/*
 * Annotation for a "continued" line of log printout (only done after a
 * line that had no enclosing \n). Only to be used by core/arch code
 * during early bootup (a continued line is not SMP-safe otherwise).
 */
#define	KERN_CONT	"<c>"

extern int console_printk[];

#define console_loglevel (console_printk[0])
#define default_message_loglevel (console_printk[1])
#define minimum_console_loglevel (console_printk[2])
#define default_console_loglevel (console_printk[3])

struct completion;
struct pt_regs;
struct user;

#ifdef CONFIG_PREEMPT_VOLUNTARY
extern int _cond_resched(void);
# define might_resched() _cond_resched()
#else
# define might_resched() do { } while (0)
#endif

#ifdef CONFIG_DEBUG_SPINLOCK_SLEEP
  void __might_sleep(const char *file, int line, int preempt_offset);
/**
 * might_sleep - annotation for functions that can sleep
 *
 * this macro will print a stack trace if it is executed in an atomic
 * context (spinlock, irq-handler, ...).
 *
 * This is a useful debugging help to be able to catch problems early and not
 * be bitten later when the calling function happens to sleep when it is not
 * supposed to.
 */
# define might_sleep() \
	do { __might_sleep(__FILE__, __LINE__, 0); might_resched(); } while (0)
#else
  static inline void __might_sleep(const char *file, int line,
				   int preempt_offset) { }
# define might_sleep() do { might_resched(); } while (0)
#endif

#define might_sleep_if(cond) do { if (cond) might_sleep(); } while (0)

#define abs(x) ({				\
		long __x = (x);			\
		(__x < 0) ? -__x : __x;		\
	})

#ifdef CONFIG_PROVE_LOCKING
void might_fault(void);
#else
static inline void might_fault(void)
{
	might_sleep();
}
#endif

extern struct atomic_notifier_head panic_notifier_list;
extern long (*panic_blink)(long time);
NORET_TYPE void panic(const char * fmt, ...)
	__attribute__ ((NORET_AND format (printf, 1, 2))) __cold;
extern void oops_enter(void);
extern void oops_exit(void);
extern int oops_may_print(void);
NORET_TYPE void do_exit(long error_code)
	ATTRIB_NORET;
NORET_TYPE void complete_and_exit(struct completion *, long)
	ATTRIB_NORET;
extern unsigned long simple_strtoul(const char *,char **,unsigned int);
extern long simple_strtol(const char *,char **,unsigned int);
extern unsigned long long simple_strtoull(const char *,char **,unsigned int);
extern long long simple_strtoll(const char *,char **,unsigned int);
extern int strict_strtoul(const char *, unsigned int, unsigned long *);
extern int strict_strtol(const char *, unsigned int, long *);
extern int strict_strtoull(const char *, unsigned int, unsigned long long *);
extern int strict_strtoll(const char *, unsigned int, long long *);
extern int sprintf(char * buf, const char * fmt, ...)
	__attribute__ ((format (printf, 2, 3)));
extern int vsprintf(char *buf, const char *, va_list)
	__attribute__ ((format (printf, 2, 0)));
extern int snprintf(char * buf, size_t size, const char * fmt, ...)
	__attribute__ ((format (printf, 3, 4)));
extern int vsnprintf(char *buf, size_t size, const char *fmt, va_list args)
	__attribute__ ((format (printf, 3, 0)));
extern int scnprintf(char * buf, size_t size, const char * fmt, ...)
	__attribute__ ((format (printf, 3, 4)));
extern int vscnprintf(char *buf, size_t size, const char *fmt, va_list args)
	__attribute__ ((format (printf, 3, 0)));
extern char *kasprintf(gfp_t gfp, const char *fmt, ...)
	__attribute__ ((format (printf, 2, 3)));
extern char *kvasprintf(gfp_t gfp, const char *fmt, va_list args);

extern int sscanf(const char *, const char *, ...)
	__attribute__ ((format (scanf, 2, 3)));
extern int vsscanf(const char *, const char *, va_list)
	__attribute__ ((format (scanf, 2, 0)));

extern int get_option(char **str, int *pint);
extern char *get_options(const char *str, int nints, int *ints);
extern unsigned long long memparse(const char *ptr, char **retptr);

extern int core_kernel_text(unsigned long addr);
extern int __kernel_text_address(unsigned long addr);
extern int kernel_text_address(unsigned long addr);
extern int func_ptr_is_kernel_text(void *ptr);

struct pid;
extern struct pid *session_of_pgrp(struct pid *pgrp);

/*
 * FW_BUG
 * Add this to a message where you are sure the firmware is buggy or behaves
 * really stupid or out of spec. Be aware that the responsible BIOS developer
 * should be able to fix this issue or at least get a concrete idea of the
 * problem by reading your message without the need of looking at the kernel
 * code.
 * 
 * Use it for definite and high priority BIOS bugs.
 *
 * FW_WARN
 * Use it for not that clear (e.g. could the kernel messed up things already?)
 * and medium priority BIOS bugs.
 *
 * FW_INFO
 * Use this one if you want to tell the user or vendor about something
 * suspicious, but generally harmless related to the firmware.
 *
 * Use it for information or very low priority BIOS bugs.
 */
#define FW_BUG		"[Firmware Bug]: "
#define FW_WARN		"[Firmware Warn]: "
#define FW_INFO		"[Firmware Info]: "

#ifdef CONFIG_PRINTK
asmlinkage int vprintk(const char *fmt, va_list args)
	__attribute__ ((format (printf, 1, 0)));
asmlinkage int printk(const char * fmt, ...)
	__attribute__ ((format (printf, 1, 2))) __cold;

extern int __printk_ratelimit(const char *func);
#define printk_ratelimit() __printk_ratelimit(__func__)
extern bool printk_timed_ratelimit(unsigned long *caller_jiffies,
				   unsigned int interval_msec);

extern int printk_delay_msec;

/*
 * Print a one-time message (analogous to WARN_ONCE() et al):
 */
#define printk_once(x...) ({			\
	static bool __print_once;		\
						\
	if (!__print_once) {			\
		__print_once = true;		\
		printk(x);			\
	}					\
})

void log_buf_kexec_setup(void);
#else
static inline int vprintk(const char *s, va_list args)
	__attribute__ ((format (printf, 1, 0)));
static inline int vprintk(const char *s, va_list args) { return 0; }
static inline int printk(const char *s, ...)
	__attribute__ ((format (printf, 1, 2)));
static inline int __cold printk(const char *s, ...) { return 0; }
static inline int printk_ratelimit(void) { return 0; }
static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies, \
					  unsigned int interval_msec)	\
		{ return false; }

/* No effect, but we still get type checking even in the !PRINTK case: */
#define printk_once(x...) printk(x)

static inline void log_buf_kexec_setup(void)
{
}
#endif

extern int printk_needs_cpu(int cpu);
extern void printk_tick(void);

extern void asmlinkage __attribute__((format(printf, 1, 2)))
	early_printk(const char *fmt, ...);

unsigned long int_sqrt(unsigned long);

static inline void console_silent(void)
{
	console_loglevel = 0;
}

static inline void console_verbose(void)
{
	if (console_loglevel)
		console_loglevel = 15;
}

extern void bust_spinlocks(int yes);
extern void wake_up_klogd(void);
extern int oops_in_progress;		/* If set, an oops, panic(), BUG() or die() is in progress */
extern int panic_timeout;
extern int panic_on_oops;
extern int panic_on_unrecovered_nmi;
extern int panic_on_io_nmi;
extern const char *print_tainted(void);
extern void add_taint(unsigned flag);
extern int test_taint(unsigned flag);
extern unsigned long get_taint(void);
extern int root_mountflags;

/* Values used for system_state */
extern enum system_states {
	SYSTEM_BOOTING,
	SYSTEM_RUNNING,
	SYSTEM_HALT,
	SYSTEM_POWER_OFF,
	SYSTEM_RESTART,
	SYSTEM_SUSPEND_DISK,
} system_state;

#define TAINT_PROPRIETARY_MODULE	0
#define TAINT_FORCED_MODULE		1
#define TAINT_UNSAFE_SMP		2
#define TAINT_FORCED_RMMOD		3
#define TAINT_MACHINE_CHECK		4
#define TAINT_BAD_PAGE			5
#define TAINT_USER			6
#define TAINT_DIE			7
#define TAINT_OVERRIDDEN_ACPI_TABLE	8
#define TAINT_WARN			9
#define TAINT_CRAP			10

extern void dump_stack(void) __cold;

enum {
	DUMP_PREFIX_NONE,
	DUMP_PREFIX_ADDRESS,
	DUMP_PREFIX_OFFSET
};
extern void hex_dump_to_buffer(const void *buf, size_t len,
				int rowsize, int groupsize,
				char *linebuf, size_t linebuflen, bool ascii);
extern void print_hex_dump(const char *level, const char *prefix_str,
				int prefix_type, int rowsize, int groupsize,
				const void *buf, size_t len, bool ascii);
extern void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
			const void *buf, size_t len);

extern const char hex_asc[];
#define hex_asc_lo(x)	hex_asc[((x) & 0x0f)]
#define hex_asc_hi(x)	hex_asc[((x) & 0xf0) >> 4]

static inline char *pack_hex_byte(char *buf, u8 byte)
{
	*buf++ = hex_asc_hi(byte);
	*buf++ = hex_asc_lo(byte);
	return buf;
}

#ifndef pr_fmt
#define pr_fmt(fmt) fmt
#endif

#define pr_emerg(fmt, ...) \
        printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
#define pr_alert(fmt, ...) \
        printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
#define pr_crit(fmt, ...) \
        printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
#define pr_err(fmt, ...) \
        printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
#define pr_warning(fmt, ...) \
        printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
#define pr_notice(fmt, ...) \
        printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
#define pr_info(fmt, ...) \
        printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
#define pr_cont(fmt, ...) \
	printk(KERN_CONT fmt, ##__VA_ARGS__)

/* pr_devel() should produce zero code unless DEBUG is defined */
#ifdef DEBUG
#define pr_devel(fmt, ...) \
	printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
#else
#define pr_devel(fmt, ...) \
	({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
#endif

/* If you are writing a driver, please use dev_dbg instead */
#if defined(DEBUG)
#define pr_debug(fmt, ...) \
	printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
#elif defined(CONFIG_DYNAMIC_DEBUG)
/* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */
#define pr_debug(fmt, ...) \
	dynamic_pr_debug(fmt, ##__VA_ARGS__)
#else
#define pr_debug(fmt, ...) \
	({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; })
#endif

/*
 * ratelimited messages with local ratelimit_state,
 * no local ratelimit_state used in the !PRINTK case
 */
#ifdef CONFIG_PRINTK
#define printk_ratelimited(fmt, ...)  ({		\
	static struct ratelimit_state _rs = {		\
		.interval = DEFAULT_RATELIMIT_INTERVAL, \
		.burst = DEFAULT_RATELIMIT_BURST,       \
	};                                              \
							\
	if (!__ratelimit(&_rs))                         \
		printk(fmt, ##__VA_ARGS__);		\
})
#else
/* No effect, but we still get type checking even in the !PRINTK case: */
#define printk_ratelimited printk
#endif

#define pr_emerg_ratelimited(fmt, ...) \
	printk_ratelimited(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
#define pr_alert_ratelimited(fmt, ...) \
	printk_ratelimited(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
#define pr_crit_ratelimited(fmt, ...) \
	printk_ratelimited(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
#define pr_err_ratelimited(fmt, ...) \
	printk_ratelimited(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
#define pr_warning_ratelimited(fmt, ...) \
	printk_ratelimited(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
#define pr_notice_ratelimited(fmt, ...) \
	printk_ratelimited(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
#define pr_info_ratelimited(fmt, ...) \
	printk_ratelimited(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
/* no pr_cont_ratelimited, don't do that... */
/* If you are writing a driver, please use dev_dbg instead */
#if defined(DEBUG)
#define pr_debug_ratelimited(fmt, ...) \
	printk_ratelimited(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
#else
#define pr_debug_ratelimited(fmt, ...) \
	({ if (0) printk_ratelimited(KERN_DEBUG pr_fmt(fmt), \
				     ##__VA_ARGS__); 0; })
#endif

/*
 * General tracing related utility functions - trace_printk(),
 * tracing_on/tracing_off and tracing_start()/tracing_stop
 *
 * Use tracing_on/tracing_off when you want to quickly turn on or off
 * tracing. It simply enables or disables the recording of the trace events.
 * This also corresponds to the user space /sys/kernel/debug/tracing/tracing_on
 * file, which gives a means for the kernel and userspace to interact.
 * Place a tracing_off() in the kernel where you want tracing to end.
 * From user space, examine the trace, and then echo 1 > tracing_on
 * to continue tracing.
 *
 * tracing_stop/tracing_start has slightly more overhead. It is used
 * by things like suspend to ram where disabling the recording of the
 * trace is not enough, but tracing must actually stop because things
 * like calling smp_processor_id() may crash the system.
 *
 * Most likely, you want to use tracing_on/tracing_off.
 */
#ifdef CONFIG_RING_BUFFER
void tracing_on(void);
void tracing_off(void);
/* trace_off_permanent stops recording with no way to bring it back */
void tracing_off_permanent(void);
int tracing_is_on(void);
#else
static inline void tracing_on(void) { }
static inline void tracing_off(void) { }
static inline void tracing_off_permanent(void) { }
static inline int tracing_is_on(void) { return 0; }
#endif
#ifdef CONFIG_TRACING
extern void tracing_start(void);
extern void tracing_stop(void);
extern void ftrace_off_permanent(void);

extern void
ftrace_special(unsigned long arg1, unsigned long arg2, unsigned long arg3);

static inline void __attribute__ ((format (printf, 1, 2)))
____trace_printk_check_format(const char *fmt, ...)
{
}
#define __trace_printk_check_format(fmt, args...)			\
do {									\
	if (0)								\
		____trace_printk_check_format(fmt, ##args);		\
} while (0)

/**
 * trace_printk - printf formatting in the ftrace buffer
 * @fmt: the printf format for printing
 *
 * Note: __trace_printk is an internal function for trace_printk and
 *       the @ip is passed in via the trace_printk macro.
 *
 * This function allows a kernel developer to debug fast path sections
 * that printk is not appropriate for. By scattering in various
 * printk like tracing in the code, a developer can quickly see
 * where problems are occurring.
 *
 * This is intended as a debugging tool for the developer only.
 * Please refrain from leaving trace_printks scattered around in
 * your code.
 */

#define trace_printk(fmt, args...)					\
do {									\
	__trace_printk_check_format(fmt, ##args);			\
	if (__builtin_constant_p(fmt)) {				\
		static const char *trace_printk_fmt			\
		  __attribute__((section("__trace_printk_fmt"))) =	\
			__builtin_constant_p(fmt) ? fmt : NULL;		\
									\
		__trace_bprintk(_THIS_IP_, trace_printk_fmt, ##args);	\
	} else								\
		__trace_printk(_THIS_IP_, fmt, ##args);		\
} while (0)

extern int
__trace_bprintk(unsigned long ip, const char *fmt, ...)
	__attribute__ ((format (printf, 2, 3)));

extern int
__trace_printk(unsigned long ip, const char *fmt, ...)
	__attribute__ ((format (printf, 2, 3)));

extern void trace_dump_stack(void);

/*
 * The double __builtin_constant_p is because gcc will give us an error
 * if we try to allocate the static variable to fmt if it is not a
 * constant. Even with the outer if statement.
 */
#define ftrace_vprintk(fmt, vargs)					\
do {									\
	if (__builtin_constant_p(fmt)) {				\
		static const char *trace_printk_fmt			\
		  __attribute__((section("__trace_printk_fmt"))) =	\
			__builtin_constant_p(fmt) ? fmt : NULL;		\
									\
		__ftrace_vbprintk(_THIS_IP_, trace_printk_fmt, vargs);	\
	} else								\
		__ftrace_vprintk(_THIS_IP_, fmt, vargs);		\
} while (0)

extern int
__ftrace_vbprintk(unsigned long ip, const char *fmt, va_list ap);

extern int
__ftrace_vprintk(unsigned long ip, const char *fmt, va_list ap);

extern void ftrace_dump(void);
#else
static inline void
ftrace_special(unsigned long arg1, unsigned long arg2, unsigned long arg3) { }
static inline int
trace_printk(const char *fmt, ...) __attribute__ ((format (printf, 1, 2)));

static inline void tracing_start(void) { }
static inline void tracing_stop(void) { }
static inline void ftrace_off_permanent(void) { }
static inline void trace_dump_stack(void) { }
static inline int
trace_printk(const char *fmt, ...)
{
	return 0;
}
static inline int
ftrace_vprintk(const char *fmt, va_list ap)
{
	return 0;
}
static inline void ftrace_dump(void) { }
#endif /* CONFIG_TRACING */

/*
 *      Display an IP address in readable format.
 */

#define NIPQUAD(addr) \
	((unsigned char *)&addr)[0], \
	((unsigned char *)&addr)[1], \
	((unsigned char *)&addr)[2], \
	((unsigned char *)&addr)[3]
#define NIPQUAD_FMT "%u.%u.%u.%u"

/*
 * min()/max()/clamp() macros that also do
 * strict type-checking.. See the
 * "unnecessary" pointer comparison.
 */
#define min(x, y) ({				\
	typeof(x) _min1 = (x);			\
	typeof(y) _min2 = (y);			\
	(void) (&_min1 == &_min2);		\
	_min1 < _min2 ? _min1 : _min2; })

#define max(x, y) ({				\
	typeof(x) _max1 = (x);			\
	typeof(y) _max2 = (y);			\
	(void) (&_max1 == &_max2);		\
	_max1 > _max2 ? _max1 : _max2; })

/**
 * clamp - return a value clamped to a given range with strict typechecking
 * @val: current value
 * @min: minimum allowable value
 * @max: maximum allowable value
 *
 * This macro does strict typechecking of min/max to make sure they are of the
 * same type as val.  See the unnecessary pointer comparisons.
 */
#define clamp(val, min, max) ({			\
	typeof(val) __val = (val);		\
	typeof(min) __min = (min);		\
	typeof(max) __max = (max);		\
	(void) (&__val == &__min);		\
	(void) (&__val == &__max);		\
	__val = __val < __min ? __min: __val;	\
	__val > __max ? __max: __val; })

/*
 * ..and if you can't take the strict
 * types, you can specify one yourself.
 *
 * Or not use min/max/clamp at all, of course.
 */
#define min_t(type, x, y) ({			\
	type __min1 = (x);			\
	type __min2 = (y);			\
	__min1 < __min2 ? __min1: __min2; })

#define max_t(type, x, y) ({			\
	type __max1 = (x);			\
	type __max2 = (y);			\
	__max1 > __max2 ? __max1: __max2; })

/**
 * clamp_t - return a value clamped to a given range using a given type
 * @type: the type of variable to use
 * @val: current value
 * @min: minimum allowable value
 * @max: maximum allowable value
 *
 * This macro does no typechecking and uses temporary variables of type
 * 'type' to make all the comparisons.
 */
#define clamp_t(type, val, min, max) ({		\
	type __val = (val);			\
	type __min = (min);			\
	type __max = (max);			\
	__val = __val < __min ? __min: __val;	\
	__val > __max ? __max: __val; })

/**
 * clamp_val - return a value clamped to a given range using val's type
 * @val: current value
 * @min: minimum allowable value
 * @max: maximum allowable value
 *
 * This macro does no typechecking and uses temporary variables of whatever
 * type the input argument 'val' is.  This is useful when val is an unsigned
 * type and min and max are literals that will otherwise be assigned a signed
 * integer type.
 */
#define clamp_val(val, min, max) ({		\
	typeof(val) __val = (val);		\
	typeof(val) __min = (min);		\
	typeof(val) __max = (max);		\
	__val = __val < __min ? __min: __val;	\
	__val > __max ? __max: __val; })


/*
 * swap - swap value of @a and @b
 */
#define swap(a, b) \
	do { typeof(a) __tmp = (a); (a) = (b); (b) = __tmp; } while (0)

/**
 * container_of - cast a member of a structure out to the containing structure
 * @ptr:	the pointer to the member.
 * @type:	the type of the container struct this is embedded in.
 * @member:	the name of the member within the struct.
 *
 */
#define container_of(ptr, type, member) ({			\
	const typeof( ((type *)0)->member ) *__mptr = (ptr);	\
	(type *)( (char *)__mptr - offsetof(type,member) );})

struct sysinfo;
extern int do_sysinfo(struct sysinfo *info);

#endif /* __KERNEL__ */

#ifndef __EXPORTED_HEADERS__
#ifndef __KERNEL__
#warning Attempt to use kernel headers from user space, see http://kernelnewbies.org/KernelHeaders
#endif /* __KERNEL__ */
#endif /* __EXPORTED_HEADERS__ */

#define SI_LOAD_SHIFT	16
struct sysinfo {
	long uptime;			/* Seconds since boot */
	unsigned long loads[3];		/* 1, 5, and 15 minute load averages */
	unsigned long totalram;		/* Total usable main memory size */
	unsigned long freeram;		/* Available memory size */
	unsigned long sharedram;	/* Amount of shared memory */
	unsigned long bufferram;	/* Memory used by buffers */
	unsigned long totalswap;	/* Total swap space size */
	unsigned long freeswap;		/* swap space still available */
	unsigned short procs;		/* Number of current processes */
	unsigned short pad;		/* explicit padding for m68k */
	unsigned long totalhigh;	/* Total high memory size */
	unsigned long freehigh;		/* Available high memory size */
	unsigned int mem_unit;		/* Memory unit size in bytes */
	char _f[20-2*sizeof(long)-sizeof(int)];	/* Padding: libc5 uses this.. */
};

/* Force a compilation error if condition is true */
#define BUILD_BUG_ON(condition) ((void)BUILD_BUG_ON_ZERO(condition))

/* Force a compilation error if condition is constant and true */
#define MAYBE_BUILD_BUG_ON(cond) ((void)sizeof(char[1 - 2 * !!(cond)]))

/* Force a compilation error if a constant expression is not a power of 2 */
#define BUILD_BUG_ON_NOT_POWER_OF_2(n)			\
	BUILD_BUG_ON((n) == 0 || (((n) & ((n) - 1)) != 0))

/* Force a compilation error if condition is true, but also produce a
   result (of value 0 and type size_t), so the expression can be used
   e.g. in a structure initializer (or where-ever else comma expressions
   aren't permitted). */
#define BUILD_BUG_ON_ZERO(e) (sizeof(struct { int:-!!(e); }))
#define BUILD_BUG_ON_NULL(e) ((void *)sizeof(struct { int:-!!(e); }))

/* Trap pasters of __FUNCTION__ at compile-time */
#define __FUNCTION__ (__func__)

/* This helps us to avoid #ifdef CONFIG_NUMA */
#ifdef CONFIG_NUMA
#define NUMA_BUILD 1
#else
#define NUMA_BUILD 0
#endif

/* Rebuild everything on CONFIG_FTRACE_MCOUNT_RECORD */
#ifdef CONFIG_FTRACE_MCOUNT_RECORD
# define REBUILD_DUE_TO_FTRACE_MCOUNT_RECORD
#endif

#endif